BPM when both sender and receiver systems are Sync. Please help!

Hi Experts,
   I want to use BPM when both sender and receiver systems are Sync. For example: web service ---> RFC
I have tried the solution as given in the blog
https://weblogs.sdn.sap.com/pub/u/39730 [original link is broken] [original link is broken]
but it does not work. I am getting Time Out error.
Can somebody tell me the correct way of configuring BPM for sync-sync scenario?
Kindly give the integraion directory steps also.
Thanks
Gopal

Hi Hemant,
   I have already tried the solution as given in the blog (https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken])but it does not work. When I run the scenario I am getting Time out error.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
  <SAP:Category>XIServer</SAP:Category>
  <SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
  <SAP:P1 />
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText />
  <SAP:ApplicationFaultMessage namespace="" />
  <SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
  <SAP:Retry>N</SAP:Retry>
  </SAP:Error>
Please help!
Thanks & Regards,
Gopal

Similar Messages

  • How to create the Business System both sender and receiver in SAP XI / PI

    Dear All
    kindly let me know how to create the Business System both sender and receiver in SAP XI / PI
    Regards
    Blue

    Hi,
      If by any chance you are not able to find these....
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
    http://help.sap.com/saphelp_nw04s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/f1/92b248db68409487661ff13239127d/content.htm
    Regds,
    Pinangshuk.

  • On a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed.  How do I remove them? they are constantly checked even when i uncheck them.  this is causing copies of my text messages to go to those phones.

    on a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed.  How do I remove them? they are constantly checked even when i uncheck them.  this is causing copies of my text messages to go to those phones.

    Are you using the same AppleID for all those phones? If so, get them all their own AppleID.
    KOT

  • TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
     Cheers, Tom

  • Can IDoc sender and receive system be the same client?

    thanks.
    I think one client can't assign to two logical system.so?

    <i>Can IDoc sender and receive system be the same client?</i>
    yes
    Regards,
    Prateek

  • Is there a way for all attachments to be 'viewed as icon' both sending and receiving?

    In Mail for Mac OSX 10.9, is there a way for all attachments to be 'viewed as icon' both sending and receiving?

    Not sure if this still works with Mavericks, but in Terminal try:
         defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes

  • I am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

    i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

    Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked

  • Will XI system acts as both sender and receiver?

    Hi,
    My scenario is JDBC>XI>XI.
    I'am getting data from database and I need to send it to XI system(Receiver) and I need response.I've done this scenario.In that I've used my XI-Dev system as sender and receiver.And I'am getting error in sxmb_moni
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No receiver could be determined</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    What can be the solution for this.
    Will it be possible if one XI system will acts as a sender and receiver?
    please help me.
    Regards,

    Hi Asmith,
            Check it out your Sender agreement, which business system you ahve used as a Sender and make sure that in receiver agreement the source system should be the same as in Sender Agreement.
    Will it be possible if one XI system will acts as a sender and receiver?
    You can use XI system as a Sender and Receiver.However as per u r scenario Source is JDBC and Receiver is XI.
    Once check it out your Configuration Sceanrio.
    Hope it will helps ...
    Cheers
    Veera

  • My iPhone has suddenly stopped allowing me to send and receive Hotmail messages. Any help would be brilliant!

    As of yesterday, my iPhone 5 stopped allowing me to send and receive messages from my Hotmail accounts. Is this a problem on Apple's end, or Hotmail's? I've seen one post that claims Hotmail is having difficulties with mobile devices at the moment, but could do with some clarification (if there actually is any out there).
    Thanks in advance!

    It is a problem on Hotmail's end and they are working on a fix. Here is a link to keep up-to-date with their progress if anyone else is in my position: https://status.live.com/detail/hotmail

  • On my iphone4 i need to be able to use both TDS and Yahoo e-mail.  TDS works only sporadically.  For instance, today I was able to both send and receive, then an hour later could not send.  got the message that the server was not recognized.

    On my iphone4 I need to be able to receive and send both TDS and Yahoo e-mail accounts (I also need to access from my Macbook Pro and my HP desktop).  I have NO problem with Yahoo, but with TDS, the e-mail seemed to work on my phone.... and then it didn't.)  In adding the TDS account, I chose "other" ( TDS is somehow accessed on the back end through gmail).  For the incoming server I used the Incoming Sever Name of pop.gmail.com and the Outgoing Mail Server as smtp.gmail.com.  I have using SSL "on" and the server port is 995.  Is this setup correct for TDS?

    FYI: POP will by default, delete messages from the server after downloading them (This applies to most pop clients, computer or mobile). POP is old tech and is not recommended if IMAP or Exchange are available. The default when setting up a g-mail type account is IMAP. Full synchronization with the server. You may also be able to set it up as an Exchange account, allowing for push e-mail and sync of calendars and contacts as well. See the Gmail help pages for instructions.

  • Conversion rule executed in sender and receiver system?

    Hello experts,
    I want to send an Idoc from one SAP system to another.
    Both systems are in the same transport line.
    In the sender system I want to execute a field conversion. There
    Therefore I maintained BD62 (Define Conversion Rule), BD55 (activate Conversion Rule for Sender/Receiver combination) and BD79 (Specifie Conversion).
    The mapping works perfectly.
    The creation of the IDoc and the field conversion work perfectly.
    But I get an error in the receiver system.
    It seems that this system also tries to execute the fieldmapping, because it has the same BD55 (sender/receiver) settings.
    The conversion rule itself does not exist in the receiver system, as these settings are not contained in a transport request.
    What is the correct way? Can I customize BD55 not to generate a transport request and maintain this setting only in the relevant system?
    Or do I need to maintain BD79 and BD62 also manually in the receiver system?
    any hints
    Barbara

    Hi Barbara,
    you have to maintain BD79 and BD62  manually in all receiver Systems.
    Kind regards
    Werner

  • I restored my iphone now my music,setting and appstore apps are missing please help

    My music,setting, and appstore apps are missing how can i get them back please help!!!

    The apps mentioned cannot be missing as they are a part of iOS.
    Search all homescreens and folders, they are there somewhere.
    If you are still unable to find them, go to Settings > General > Reset > Reset Homescreen Layout.  They should be findable via a Spotlight search if the Settings app is not viewable on the homescreen.
    Alternatively, restore the device as new.

  • My iPhone both sends and receives messages from 2 different phones. They are registered with the same iTunes account. What can I do to stop this?

    My partner and I both have iPhone 5s and an iPad. We registered all three products with the same iTunes account as we download music and movies together. I have noticed when my partner sends me a message it also appears on my phone that I have sent it AND recieved it. The same goes for when I text him. I send the message to his phone and my phone also recieves it. Facetime does the same thing. Its very strange. Does any one know what I can do to stop this from happening?

    To stop this, don't use the same Apple ID on both phones for iMessage and FaceTime.  (You can continue to use the same ID for iTunes; it doesn't need to be the same as the ID used for iMessage or FaceTime.)
    On one of the phones, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID.  Then do the same thing in Settings>FaceTime.

  • Configuring IDOC and RFC Adapters in both Sender and receiver side

    Hi ,
    Kindly tell me the steps to configure IDOC adapters in sender as well as receiver side.
    Similarly for RFC adapters.
    Regards,
    Sweta

    Hi,
    >>>Kindly tell me the steps to configure IDOC adapters in sender as well as receiver side.
    kindly try searching for them first yourself (there are tons of docs for that and similar questions)
    and come back if you any further issues
    Thank you,
    Regards,
    Michal Krawczyk

  • Firefox on linux gets confused when both 32bit and 64bit plugins are found

    On a CentOS6 machines, 32bit plugins get installed to /usr/lib/mozilla/plugins and 64bit plugins get installed /usr/lib64/mozilla/plugins. If both locations have the same plugin installed, such as libflashplayer.so, then 64bit firefox seems to randomly find one first and fail when it sees the 32bit version first. This results in Flash working for some users and not for others .
    I can run "strings -a ~/.mozilla/firefox/*/pluginreg.dat | grep usr.lib" and see which users will have it fail because the 32bit path to libflashplayer.so is listed first for them. For the users where it works the 64bit version in /usr/ilb64 is listed first.
    I see no way to make 64bit firefox ignore what is in /usr/lib/mozilla/plugins as this seems hardcoded into the binary. I also see no way to make the /usr/lib64 path take precedence as I have MOZ_PLUGIN_PATH=/usr/lib64/mozilla/plugins-wrapped
    The output I see on the stderr is:
    LoadPlugin: failed to initialize shared library /usr/lib/flash-plugin/libflashplayer.so [/usr/lib/flash-plugin/libflashplayer.so: wrong ELF class: ELFCLASS32]
    [8941] WARNING: pipe error (60): Connection reset by peer: file /builds/slave/rel-m-rel-l64_bld-000000000000/build/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 450
    repeated many times
    It seems to me at least that plugins in a user set MOZ_PLUGIN_PATH should always take precedence over those in a hard coded path like /usr/lib/mozilla/plugins

    HI paulraines68,
    This may be a question that is beyond the user support of this forum. There are channels I can point you to for feedback or how to submit a bug for this [bugzilla.mozilla.org].
    However stackoverflow.com may be the best place for solving the immediate question.

Maybe you are looking for

  • Replace hard drive iMac 20" intel core duo

    How to do it? (see title)

  • Audio-out to MBP?

    I need to digitize some cassettes and records since they are (especially the cassettes) are getting pretty worn out, and i'm down to my last working record player. I'm just looking for some sort of cable where I can plug the 2 audio-out wires (red an

  • File directory.

    Hey Guys, i dont know if this is possible, but im building an intranet and there a page thats is going to link to lots of files, but these file will be contantly changing, adding and removing. i am wondering on that page is it possible to have a litt

  • Date validation via minValue in UI

    Hi, I am new in ADF so looking for some help. I have 2 inputDate in UI with behavior startDate and endDate. I am validating the date value with minValue property on endDate, like endDate should not be less than startDate. It is working fine and behav

  • How do I retrieve a site that I uploaded to the temporary Business Catalyst Host?

    How do I retrieve a site that I uploaded to the temporary Business Catalyst Host after losing the site on my system?