Brand new macbook pro 2012 (no retina display) 95% battery health with 5 cycles? is that okay?

I know, another battery related question. I have recently bought a brand new macbook pro (no retina display), I calibrated the battery at least twice since Ive had it and it states that I am at 95% battery health with only 5 charges. Is that normal or should I bring my macbook in to be checked? Id like to get this settled before school starts in September since I depend on my macbook a great deal.
thanks !

Full cycle? 100%, of course.
How you get there is another matter. It can be a battery killing full discharge that will certainly ensure a brief life. Or a leisure set of discharges down to 20%, 30% or more. When they all sum up 100%, winner! You've got a cycle!!
Apple recommends you enjoy your Mac and don't obsess too much on battery stuff. Just exercise the electrons every so often by bringing it down to, say, 20% and charge it back up. Going all the way down to the bitter end, when the Mac forces itself to sleep is sort of ok too and won't do (too much) damage, provided you don't make it an engrained habit. We all forget the power brick occasionally and get caught out in the wild with whatever charge was left inside.

Similar Messages

  • Trackpad not working on brand new Macbook Pro 15" not retina,

    I've just got from UPS my new Macbook Pro 15" not retina. It's the basic model, without upgrades.
    I've plugged it in and turned it on to go through the setup assistant, but I had to do it with the keyboard and an external USB mouse, because the internal trackpad is not responding at all. Is it normal?
    Thanks!

    That was the first thing I did. They told me that it was normal, but I don't believe them. They told me to wait until installation was complete and perform updates, and try after that. That's what I'll do, but I suspect I'll have to have it replaced.
    Right now I'm migrating my old mac to this one. I'll update as soon as migration is complete.

  • Brand new Macbook pro 15inch (not Retina) wont boot my MBP 13 inch (2011) HD

    Just bought a brand new macbook pro 15 inch, replaced the hdd with my 13 inch hdd and it wont boot. i got a Error msg. (Lion)
    - I put the new hdd in the old MBP(13 inch) and it boots fine.
    - I put back the old hdd in the MBP(13 inch) and it boots fine.
    I figured the hdd wasnt compatable with the 15inch so then i cloned the 13inch hdd onto the 15inch hoping it would work. i still got the error msg.
    so now im stuck because the 15inch wont boot from the stock hdd because it has the data from the 13inch. Very frustrating, what could be the logical reason to why it wont boot?

    That's correct. The version of Lion you have on your old disk will not boot on the new machine.
    What you should have done is make a Time Machine backup of your old drive. You still may be able to buy an enclosure for it and see if you can use Migration Assistant to migrate your apps and data, but I'm not sure that will work (works when an old drive is in another Mac and you transfer via, for instance, Firewire).
    So you'll just have to resinatll the correct version of Mountain Lion and then you can TRY to use Migration Asistant to get your data/apps from your old hard drive once it's in an enclosure (again, I'm not sure that it will actually WORK, I've never tried it).
    Clinton

  • How to factory restore a new Macbook pro w/o retina display?

    I have found no useful information. It came with no restore disc, and I did the second option after you restart your macbook while holding Command +R.  After I did the second option which took hours, my hard drive wasn't factory restored... This is new macbook pro w/o retina.

    Follow the instructions here - How to prepare your Mac for sale - even if you aren't selling your MBP, this will guide you through the steps you need to take to get to the 'factory defaults' option.
    Good luck,
    Clinton

  • Brand new MacBook Pro 2012 not booting install of Mountain Lion

    Hi,
    I have a brand new 15" MacBook Pro 2012 model (2.6Ghz, 8GB Ram) - works fine on OS X Lion. As I had just bought it I decided to upgrade it to Mountain Lion straight away, and here's where the problems start.
    After apparent install the machine re-boots, but upon re-boot I get what I have found to be called 'the grey screen of death' where the loading icon disappears and the apple logo appears and the screen dulls slightly. I have also noticed that through the install process I lose keyboard and trackpad funcionality and the 'spinning wheel of death' froze, even though the loading icon contined to countdown the minutes till install.
    I have read many threads online now about how to reboot and reinstall OS X Lion, I have done this succesfully. I managed to save the OS X Mountain Lion files to an external device and attempt to reboot that way - same problems!
    How on earth do I get OS X Mountain Lion working on this machine?
    From the threads I have read no one has answered this - they simply answer how to reboot into OS X Lion. Others have stated that they have been in to see Apple's "Genuis" bar and the "Genious's" cannot explain the problem and attempt to put it down to hard drive failures etc. Problem is, there seems to be a **** of a lot of people out there with the same issue - surely it's OS problems and not hardware if it's a brand new MacBook?
    Has anyone else experienced this? And does anyone else have a solution to my problem?
    For the record, I have updated my EFI and firmware as well as my operating system before attempting install.
    Cheers,
    Leigh

    Welcome to the Apple Support Communities
    As you've Mountain Lion, press Command and R keys on boot, open Disk Utility, erase the drive and reinstall Mountain Lion

  • I have a brand new MacBook Pro 13.3" Retina. Can I download/install and use my Photoshop CC on it?

    Can I please get an answer as to if and how to download and install and use fully the Photoshop CC ($9.99/mo. plan) on my brand spanking new Apple MacBook Pro 13.3" with Retina display? Thank you, guys!!!

    Of course.
    Sign in to www.adobe.com, download the Cloud desktop app, download the software.

  • I want to use my iPad(4) as the remote for controlling my powerpoint presentation that is on my macbook pro(2012 no retina display). Not sure which is the best way to do so or which app to use.

    Going to be connecting my macbook pro to a projector. in the room there is no wifi either)

    Keynote Remote, but you will need wifi. You can set up an ad-hoc wifi network from your Macbook itself ("Create Network" from the Wifi menu), which the iPad can connect to.
    https://itunes.apple.com/us/app/keynote-remote/id300719251?mt=8
    Matt

  • New MacBook Pro 2012 with battery health at 92%

    Hi everyone!
    Few weeks ago I bought brand new MacBook Pro (2012, 13"). After 12 cycles the battery health significantly decreased to 92%. Quite unexpected, isn't? Could you advise me what can be a problem? AC adapter, socket in my wall or something else?
    To answer your questions, I did not put the battery below 10% during this time.
    Thanks in advance for any hints!

    You have to take the computer to the Apple store to have it checked out.
    Genius Bar reservation:
    http://www.apple.com/retail/geniusbar/
    Best.

  • I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

    I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

    Hello HanaAmer1,
    We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Cheers,
    Allen

  • My brand New Macbook Pro with Retina Display is slow.

    Just today I got a brand new Macbook Pro with the Retina Display. Last week I got the same one except the base model ($1300). Today I decided I wanted a much faster one with better storage so I decided to exchange it for the higher end model ($1500) with 8gb ram and 256gb ssd. When I went to speedtest.net, the results were really dissappointing. I got 65 ping, 15mbps for download speed, and 2mbps for upload speed. My previous new Macbook got a 13 ping, 20 mbps for download speed, and 6 mbps for upload speed. I've restarted my computer many times but got the same results (even with different browsers). Does anybody know why is this?

    Hi gluMoster,
    It's frustrating when laying out your hard earned cash on technology to find out that it just doesn't fix your issues. Fortunately it sounds to me that your issue is your network and/or internet service provider. The "speedtest" only checks your connectivity to various servers on the internet, and doesn't really test out your laptop.
    For a hardware(laptop/desktop) test I recommend geekbench which can be found at http://www.primatelabs.com/geekbench/ the tools here will test your machines processor and give you an idea of your hardwares speed.
    To remedy your problem I would first check your wireless router (I am assuming your laptop connects to the internet wirelessly) and see if it is atleast N capable. I see routers all the time that are B/G that get old and just can't deliver the speed that new and added network devices and websites require to function frictionless. If your router is an N or better yet an AC, then we'd need to look at your modem or your service provider. If you have ATT DSL, there have been reports, somewhat confirmed, that they are dialing down things on the DSL side in order to persuade their customers to move to Uverse, but you didn't hear that from me
    If your router is ok, and the modem too take your laptop and sit it relatively close to your wireless router/access point and run the speedtest again. It could be that some new piece of furniture, or maybe even cordless phone is blocking the wireless signal to where you use your laptop most.
    Best of luck,
    damon

  • My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

    My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

    Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
    In the meantime, can attempt an SMC Reset to see if it helps.

  • Brand new MacBook Pro Retina display wont come up at all.

    I got a brand new MacBook Pro retina display a week ago. Since yesterday, it won't come up at all. Screen stays blank, no HD sound, nothing. Does anyone else have same issue which they resolved already?

    I did call them and it seems there is no solution except sending it back to them and getting a new one.
    This is by far the most strange issue I have seen. Seems more like a hardware issue than software.
    Thanks for you suggestion though. I will post an update ones this case gets resolved.

  • PLEASE HELP me select new internal hard drive for Macbook Pro 2012 (non-retina)

    Good afternoon.
    I just bought a Macbook Pro 2012 (non-retina) 15 inch from a friend.  I think it is running Mountain Lion (has not been upgraded to Mavericks yet), and has iLife on it.  It came with the stock 500 gb 5400 rpm internal hard drive.  At home, I only have the Snow Leopard OS installation Cds and a copy of iLife 2011 installation Cds.  I am going to buy 16 gb of RAM from Other World Computing to install.
    I want to replace the hard drive with a 1 tb hard drive, preferably something that is $100 or less.
    I talked to Other World Computing (OWC) and looked at the Data Doubler Option to replace the optical drive with a Solid State drive, but decided that for now I want to keep the optical drive inside the computer for portability issues.
    I know that Solid State drives are better, but they are still too small, and I want the ease and portability of a 1 tb size INSIDE my computer.
    Initially I was going to order this from Other World Computing: 1.0TB 2.5" HGST Travelstar 7K1000 7200RPM SATA 6Gb/s 9.5mm Notebook Drive 32MB Cache. *'New' Factory Replacement with 2+ Year HGST Warranty*    As of April 4, 2014 it's on sale for $79
    But then I started reading some of the discussions online and thought maybe I should get a hybrid solid state drive?
    I saw on Amazon the Seagate 1TB Solid State Hybrid Drive SATA 6Gbps 64MB Cache 2.5-Inch ST1000LM014  It's on sale for $94.
    But according to some reviews, this Seagate has a platter that is only 5400rpm, unlike the previous Seagate Momentum that has a platter speed of 7200rpm.
    How reliable are the Seagate, versus a Toshiba or Western Digital or Hitachi or something else?
    Here are my questions about replacing the hard drive:
    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    I would love to get some recommendations about the smartest option to upgrade my hard drive with something that will be fast (I edit lots of photos) and large (1 tb) that isn't going to cost too much.  I don't know much about the different brands or options (and there are so many listed in tons of online reviews), that I got really overwhelmed and confused by the info out there.
    I would really appreciate any help and advice.  I've never switched out a hard drive before.
    PLEASE HELP !!!  Thanks!
    Here is the "About this Mac" Info:
    Macbook Pro 15-in Mid 2012
    Model Identifier: MacBookPro9,1
    Processor: 2.3 GHz Intel Core i7
    Memory: 4 GB 1600 MHz DDR3
    Software: OS x 10.8.5
    Storage (Hard drive): APPLE HDD ST500LM012 Media, Rotational, SATA, GPT (GUID Partition Table)

    1.  Is a hybrid solid state drive going to need some kind of special formatting after I put it into the macbook so that I can put the operating system on it?
    The boot drive, regardless of what it is, needs to be formatted as Mac OS Extended (Journaled).  This is standard with OS X.
    2.  Is a "normal" platter hard drive more reliable than a hybrid solid state drive?
    There are arguments pro and con.  Bottom line, SSD's and hybrid drives are still quite expensive per GB than standard hard drives.  If you have the bucks and are a speed demon, go ahead.   I have better use for my money.   Standard hard drives are mechanical and may wear out over time.  But even though SSDs are not mechancial, they can still go bad and ultimately they even have a limit to their write capacity.  The jury is still out on this debate.
    3.  Is there any additional driver or special software that I have to install for a hybrid solid state drive?
    No
    4.  Currently there is no personal data stored on the computer.  Can I just put the new hard drive in, and then insert the snow leopard install cd?
    You can physically put the hard drive in but probably not install Snow Leopard on this MBP.
    The mid-2012 MacBookPro9,1 models came with Lion 10.7.3 (11D2097) preinstalled.   It is very unlikely you would be able to install Snow Leopard on it.  Historically you cannot install a version of OS X that is earlier than the version that came with your Mac (even if you replace the hard drive).
    5.  If I install snow leopard, can I just go to the App store and get the free upgrade to Mavericks?
    Not via Snow Leopard on this MBP.  See my response to #4.
    6.  If I want to do the "Data Doubler" option in the future and add a normal Solid State drive into my computer, will it have trouble interacting with the 1 tb hybrid solid state drive?
    No.  They are completely independent of each other; they are just independent storage units (drives) and their RAM does not interact.

  • I have a white vertical line down the right side of my internal brand new macbook pro 13" display

    I have a white vertical line down the right side of my internal brand new macbook pro 13" display. I've done the following:
    -Shutdown the computer, and restarted in Safe Mode by pressing the Shift key after the restart tone
    -Shutdown the computer, and restarted by pressing Command, Option, P & R after the restart tone
    -Checked display resolution, Best for Retina
    -Hooked it up to a Dell external monitor and via projection to screen. There are no lines on the external or secondary screens
    -Just curious, I ran a color utility which can not repair 4 items, maybe this is another issue.
    This is a brand new Macbook Pro, just out of the box. It was fine for two days without any issues, fine last night while in use, opened it up this morning with the line.
    Anyone now how I can fix this on my own?
    Details atta
    <Edited by Host>

    If you are within the first 14 days from the date of purchase, return the MBP for a refund or an exchange.  If you are after the first 14 days of the date of purchase, have the MBP repaired under the warranty provisions.
    Ciao.

  • Brand new macbook pro 15" when connected to external LCD display in high resolution ,flickers often

    Hi,
    I have brand new macbook pro 15" with retina display.
    I have connected external LCD display (Samsung B2230) using Apple VGA adaptor & thunderbolt port. But LCD display flickers quite oftenly. I read community blogs where many macbook pro users like me are facing similiar issue.
    There is no problem with LCD display as it works fine with Lenova laptops.
    Can anybody please provide me the solution to this problem.?
    Regards,
    Sam

    Hello there, Sam.
    The following Knowledge Base article provides some great steps for troubleshooting your issue:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • Trying to understand a WS-I validation failure

    I'm trying to understand the following WS-I validation failure message. I'm sure I'm making a basic mistake but I can't find an example of the use case where an xsd is imported. Can someone point out my error? Thanks, Bret Validation failure: Result

  • Unable to create server instance in Oracle Directory Service Control Center (11.1.1.7.0)

    Hi, I have installed ODSEE 11.1.1.7.0 on Win2008. The DSCC is deployed on glassfish 3. I'm getting following error (could not contact the DSCC agent...) while try to create instance: The "dsccagent info" shows the agent is running. The JMX port is 39

  • After upgrade the firmware, it can't be initialize

    Hi, I use PCI-7344 and UMI-7764 and upgrade the motion software and firmware to 7.2 version but I can't be initialize the motion card in MAX the error code is -70038 由 ycw7 在 03-25-200601:53 PM 上編輯的訊息 ==================== ●LV Version:LabVIEW7.1 ●OS:W

  • Question about upgrading R12

    Dear all, My customer wants to upgrade EBS from 12.1.1 to 12.1.3. He has questions about module OTL and AGIS. He wants to know: 1. Apply OTL&AGIS on 12.1.1, then upgrade to 12.1.3 2. Upgrade 12.1.3, finish all post upgrade of 12.1.3, then apply patch

  • Kuler needs a help section ...

    ... because I simply don't get it how it works. How can I get the HEX values of the colors? How can I store a theme in MyKuler? How can I transport themes over to Dreamweaver 8? (With CS2 applications it works fine.) Kind regards Wolfgang