Bridge collapse when Preview window is used

This only started after a recent update. I have Windows XP x64, 8 GB, quad Zeon. InDesign, Photoshop, and Acrobat are open. If I keep Preview closed, it won't crash. In Preview, the image appears in the coarse version before the higher rez kicks in. Anyone with a better workaround?

"John Joslin" <[email protected]> wrote in news:[email protected]: > > > I installed the camera raw plug-in 4.5 and the camera raw module > reads now vers.4.5.0.175, however the camera button in this > module still gives ACR 4.4.What' wrong? > > > > > Since you apparently did it right, I re-read your post. What do you > mean with "the camera button in this module"? > I think he means that when he is in camera raw, and it poke the camera calibration button at the top it shows ACR 4.4 which if he has installed the new profiles from Adobe there would be a drop down showing the new profiles for his camera. ACR 4.4 is just showing that until something else is selected its using the camera profiles from ACR 4.4. This is not showing that its ACR version 4.4. John Passaneau

Similar Messages

HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD." I thought my install disk was for 32 or 64 bit. What does this mean?

When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?

It means you need the 64 bit Version of Windows on a USB stick or DVD.

When in Windows 7 (using bootcamp obviously) I am able to see my files in my Mac partition. When I try to access them I am told that I need permission from the administrator. How do I give myself permission to access files between the two partitions?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

Bridge CS4: Changing preview window's background color

How can I change the preview window's background color? (default is black) It happens that I have some black images with alpha (transparent background) and being all black they blend with the preview window's background color. can this be changed?? I looked everywhere and the only thing I found is how to change bridge's appearance, but not the preview window's bg color. Thanx in advance

Try changing the thumbnail style to HQ or ?, and see if that makes any difference. In Quick thumbs it may not display layers.

Error 0x80300024 When Installing Windows 7 Using Bootcamp

Hi. I'm trying to install windows on my mac mini. I have a 2010 mini server with dual 500gb hard drives. I want to have one disc for apple and the other disc for windows. When I try the install I get the windows error 0x80300024. After some research I found a straightforward, but not easy solution. It seems windows freaks out when it sees more than one physical hard drive. Therefore the solution is to disconnect the cables for the other hard drive, install windows on the target drive, then reconnect the cables to the other drive. I rather not tear open the mini and do this as it looks a little painful. Anyone have a suggestion on how to get around this? And yes, I know it's a windows issue but i figured there must be some mini users who've experienced this issue.
Thanks.
Craig

Hi Graig,
One possble solution here, with maybe alt key to boot your Windows installer instead of the c key...
PrincessPeachJun 17, 2009, 06:48 PM
I just installed it today (twice actually, after changing my mind about something) so I can tell you how to do it. What I did was completely ignore Boot Camp and used Disk Utility to format the intended Windows drive as FAT32/Master Boot Record. Then I just rebooted with C held down and the Windows 7 CD took care of the rest.
I have a 2009 Mac Pro so all my drivers etc were on my OS disc. If you need to burn the drivers, by all means use Boot Camp just for that part
I got a warning in Windows 7 that Boot Camp had issues with the RC but it has been rock solid so far.
http://forums.macrumors.com/archive/index.php/t-722467.html

When installing Windows 7 using Bootcamp, expanding windows files gets stuck at 65%?

I was installing Windows 7 Home Premium 64 bit on my Macboom Pro Retina with Bootcamp, and when it reached the "expanding windows files" stage, it got stuck at 0%. I waited a few minutes, and the percentage began to increase until it got to 65%, at which it stopped again. I left it for a while, but after coming back nearly an hour later, it was still stuck at 65%, so I canceled the installation by clicking the close button of the installation window. It froze after that. I could move my cursor, but I couldn't click anything. I got impatient and held down the power button to shut it down manually. When I restarted the Mac, it played the normal startup sound then went to a black screen with a blinking dash symbol in the upper left corner. It's now stuck on this screen. I'm scared I might have really screwed up my computer. What do I do?

Edit: Fixed it by just holding down the option key when it restarted. Don't know why I didn't think of that before. I also removed the partial Windows download and the whole Windows disc partition using Bootcamp.
I think the reason why it didn't work is because I used an OEM version of Windows 7, which is to say I bought the licence key off of some website for $35 and they emailed me with the key and an .iso of Windows 7. I read somewhere that using OEMs with Bootcamp is not recommended. But that leads me to another problem - I really do want Windows on my Mac since I have some programs that would only run on Windows and I bought PhotoShop Elements 12 for the Windows platform and to switch platforms I would need to upgrade to 13, which costs almost as much as buying the original. And I don't want to go buy a proper Windows installation disc, that would mean wasting the $35 I already spent.
So is there any way I can actually install Windows safely with my OEM version of it?

Problem deleting pdf files on network ressources when preview window of the explorer is enabled

Some of our customers have the Preview Function enabled in Windows Explorer. When they delete a pdf File on a network ressource (\\server1\share1\ for example) in Windows Explorer the file disappears, but will not be deleted immediately. After a refresh of the current explorer window, the file apperas again. After 30-60 seconds and a refresh of the Windows Explorer View, the file disappears definitely.
The problem exists only on various network ressources and when the Preview Function of the Windows Explorer is enabled. On local drives the pdf Files will be deleted immediately and don't appear again. With any other file types except pdf, there is no problem.
Problem exists on 32 and 64 Bit Windows 7, all current security Updates installed. Current Version of Adobe Reader X is also installed.
Anyone have an idea?

Disable the preview function of Windows Explorer.

Collapsing the space-wasting preview window when clicking on bookmarks???

Does anyone know where you can collapse the large-useless preview window in each of the bookmarks you open? I didn't realize people needed visual aids to look at their list of bookmarks under "table of contents" in the left column or in the bookmarks bar. This is just the most annoying and space-wasting of the new designs here, although there are at least a half-dozen more - just want to read my whole list of sites tallied in each folder.

MERCI! GRACIAS!! MAHALO!!
Is this necessary every time you "open all bookmarks", or is it possible to do it once and have it stick?
I wonder why there were no instructions on the "Safari help" link about this ridiculous item, I guess they must assume here that everyone has a 30" screen instead of a laptop-size, and can see all their bookmark-lists upon opening them!
Thanks again, H-S -

When using spotlight, the preview window opens and refuses to close

The spotlight preview window won't close. It just sits on top of anything else that you have open. It is a massive pain, particularly when i have about 50 windows open and have to restart the computer to remove it. Any suggestions?

Closing apps doesn't help (Until i close everything and restart the computer). It seems to be stuck to a space. Because when i shift spaces, it stays there. Next time i might try deleting the space and see what happens.
Spotlight is not indexing, it's just open. Unofrtunately i forgot to take a screenshot of activity monitor, but i took some of what the problem looks like:

What happened to the preview window & Bridge icon?

In PSCS6, I don't have a preview window in the "Open" dialog box. In PSCS5, when I clicked on an image file, I had a thumbnail preview. Also, the Bridge icon in the toolbar disappeared, which was visable in PSCS5.
Don

Lost two features, Photoshop has. The Adobe Jedi have waved hands and said, "these are not the features you're looking for".
You can conceivably put a Bridge icon on the desktop near where it used to be, and leave a little room outside of the Photoshop application frame where you can see it, or use the File - Browse In Bridge menu item, or Alt-Control-O (or the Mac equivalent if you're on that system).
If you're on Windows, you could consider getting a codec pack that will provide you thumbnail images right in the dialog and Explorer windows. I can recommend the one that I use: The FastPictureViewer Codec Pack.
-Noel

Bridge crashes when hitting spacebar to go into preview mode.

Hello there,
So, whenever i've been in Bridge for a little while and want to do a full preview mode by hitting the spacebar I get the dark grey screen and after awhile "the spinning beach ball of death" appears. This continues until I have to force quit Bridge. When I restart bridge and try to do a new preview right away the same problem occurs imeditly.
I've tried to delete all the preffs both manually and automatically by holding down the option key during start up, but nothing helps. I've also installed the latest updates.
I'm on a pretty new Macbook Pro 2.53 GHz Intel i5 bought this summer with a SSD harddrive and 4gb of RAM if that is of interest.
Am I way off if I think it could have to do with the graphics card?
Well I'm thankful if anybody has solution for this.
Best,
Per

Deleting prefs manually seems to be OK although I personal would not bother
about the last workspace
> I don't really understand this part you wrote.
"What setting do you generally have for Bridge preview, always high Quality
or on demand or embedded previews
In Bridge Path Bar top right there are two small checker board icons. The
left one is just a shortcut for prefer embedded previews that only let you
cache the thumbs. A quick way to view the content of a non cached folder and
have the option to glance through thumbnails without having the need to wait
for all the previews to be build.
The right one gives you 3 options, first prefer embedded (same as left icon
and in fact is double but there are still more strange things in Bridge
regarding to workflow I'm afraid...)
Second is High Quality on Demand meaning the HQ preview builds when you
select the file. Somewhat useful but time costly when having to click on
several files and every time have to wait for the building of the preview.
Third is Always HQ. This one I prefer to have set as default. It means that
you have to wait longer for all the previews to being build but this is only
once and after this you can browse freely through all the files.
Having set to also build monitor sized previews in the prefs means you also
have to wait a little longer once when the folder builds cache but this is
in the same go after file ingestion and after this you can use the space bar
almost without delay to see a full screen preview. (And I'm on a 30"" Apple
Cinema display using mostly files from a EOS 1Ds3, big files, big screen
When it comes to size it can be any size, either a large psd. file or a tiny
.jpg. And i have my max set to 1000mb.
With this setting files above 1000 MB don't build previews but that should
not cause trouble when hitting spacebar, it only shows the small thumb on a
full screen with gray background and surely should not let Bridge crash.
Try also system maintenance with check and repair permissions.
And if the problem still persist create a new user for testing, log in under
this new account and try if the problem is still there, just to rule out
your current user account as the culprit.

Print Templates print preview window closes unexpectly when printing document

This is a cross posting from Internet Explorer Web Development after a suggestion that this forum would be a better location. See
https://social.msdn.microsoft.com/Forums/ie/en-US/351e1245-b606-4467-9f3c-1c72f9cdf9ea/print-templates-print-preview-window-closes-unexpectly-when-printing-document?forum=iewebdevelopment.
I have raised an issue through Connect for this:
https://connect.microsoft.com/IE/feedback/details/1134168/ie9-to-ie11-print-templates-print-preview-window-closes-unexpectly-when-printing-document, but I would like some more visibility of the issue as my customers thought my application was closing when
they printed a document. I also don't know if an issue in Connect gets any priority support via MSDN, but this forum does.
This looks to me like a problem in the IE Print Templates startDoc API call, but if there is a more appropriate forum to raise this issue in please let me know.
In the application where I use print templates, the window closing is not in it self a problem because the Javascript that is calling startDoc also closes the Print Preview window when the print is finished.
The fact that the application looses focus and can be hidden by the windows of other applications when the Print Preview window is closed by startDoc is the issue noticed by our customers, so I need a fix preferably, or a work around at a pinch.
Details of the issue reproduced below.
When using IE Print Templates, the startDoc function is causing the print preview window to close. This behaviour started with IE9, and is still present with IE11.
When an application is using print templates (see
https://msdn.microsoft.com/en-us/library/aa753279(v=vs.85).aspx) for print functionality, this has the effect of causing the application to become hidden by any other application window once printing from the print preview window has started. It is
actually this behaviour that started me looking at this issue as the users thought the hosting application had closed.
Print Templates are not accessible by using IE as a web browser, but only when using the WebBrowser Control to embed IE in an application. The reference for this feature is available from this url:https://msdn.microsoft.com/en-us/library/aa753279(v=vs.85).aspx
and a sample Microsoft application that demonstrates the use of Print Templates can be used to demonstrate the problem (required for the reproduction steps). The application is available via this article and searching for "download spiffy".
Steps to reproduce the problem:
To see the full effect of the issue, first ensure there is a window from another application (like Windows Explorer) that will cover the sample applications window if brought to the foreground (making the Windows Explorer window full screen works).
Start the sample application (and ensure that the full screen Window Explorer is the next application to activate).
Then in the drop down box in the top right corner of the UI select Template8.htm.
Click the Print Preview button that is just below the drop down box (this will open a new Print Preview window).
In the new window click the Print… button (this will open a Print dialog).
Click the Print button at the bottom of the Print dialog.
The Print dialog closes (expected) and then the Print Preview window also closes (not expected), however the document is still printed successfully.
When the Print Preview windows is closed unexpectedly, the Windows Explorer window is brought to the foreground (obscuring the sample applications window).
If you reselect the sample application and click the Print Preview button again, the Print Preview dialog is not displayed unless you restart the application (this looks to be a symptom of the same issue, not a separate problem).
To see that the Print Preview window appears to be closed by the startDoc call, use the resource editor in Visual Studio (the exe can be opened directly by File | Open | File…) to edit the HTML resource "TEMPLATE8.HTM" (I found I needed to delete
it and add it back in for the change to stick), find the startDoc call and add two alerts, one on the line before and one on the line after. When IE is accessing the template, it is being done using the name of the executable (so do not rename the modified
version of printtemplates.exe, make the changes to a copy in a different directory if you don't want to change the original). Start the modified version of the application and follow the same steps as in the reproduction. This time, after clicking
the Print button in the Print dialog, the dialog will close, the first alert will pop up, then the Print Preview window will close, then
the second alert will pop up.
Thank you,
Warren.

Hi Shu,
I have noticed that the print templates API is listed as part of the Legacy APIs.
Is this just because it hasn't changed or is not new? Or does this mean that it is no longer maintained and may be removed (or at least deprecated) at some point in the future?
It would good to know if we should start planning for the implementation of a different method of printing.
I understand that the sample application is no longer maintained, but I also think that the Print Template API that it uses has not changed, and so should still work (and it does mostly).
If the Print Preview window was being closed as a result of using the Print dialog (and if it had behaved the same way with IE8) I would be willing to go with the by design argument.
I have found that the Print Preview window is not closed until startDoc is called, and it closes before control is returned from the startDoc function.
Just as part of investigating and try to find a workaround, if I call window.close(), any alert calls made no longer display the alert window after the close call.
Alert still functions after startDoc has closed the window however.
The is not the sort of consistent behaviour I would expect from something that is by design.
Also while investigating, I found that calling startDoc after calling window.close() results in an exception with the error code -2147467259 (0x80004005), this is probably quite normal and expected, but does indicate that the Web Browser Control should
not be closed till after printing.
I had found that old thread, and I had concluded it was the same issue, but it was also aimed at different aspect of the problem (which I see in the sample application, but not my application).
The visible issue I have is that my users think the application has been closed because after clicking print (on the Print dialog) the application gets hidden by other windows from other applications.
This aspect affects the sample in the same manner and so it was a convenient way to demonstrate the problem.
If IE connect do not look at this issue any time soon, do I have any other avenues to resolve this issue?
Thank you,
Warren.

Preview window disabled when capturing FCP

A message comes up in the preview window saying 'preview disabled' even though the vtr os connected properly and can upload video: how do I enable it?

Hello
I use a XM-2. That is the European/PAL version of your camera. I have had this problem since a year. I use a LaCie external 500 GB drive. Sometimes I could work around the problem using the internal drive. But now I think I have solved the problem. At least for me. There are two problems. First see to that you only have Quick Time 7 and not anything left from previuos versions. Look in the Receipts folder where you can find traces of old versions. (There is Apple message about this somewhere). Then shut down the computer, not restart, shut it down completly. Shut down the camcorder. Wait a minut or two so everything is quiet. Then start the camcorder. Wait for a while and then start the computer. When everything is up and running start FCE and hopfully you will not see the message Preview Disabled.
I hope it will work for you
Anders

Using Bridge CC when I right click on picture to show open with menu it wont show Photoshop cc 2014. How do I fix that?

Using Bridge CC when I right click on picture to show open with menu it wont show Photoshop cc 2014. How do I fix that?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Preview windows leave ghosts when closed

When I close PDFs using Preview, about 5-10% of the time they do not fully close – they leave behind a gray "ghost" window that will not close. If I quit Preview and re-start it, the zombie PDF re-opens (Yes, I have the re-open windows option checked and that's the behavior I want so please do not advise me to disable it). I can then close the PDF without getting stuck with a ghost window. Anyone else having this problem? Anything I can do to avoid having to restart Preview whenever I want to close a PDF?

Hi,
Does the issue only happen to Office files? and only those opened directly from Outlook client?
Please first try to update the graphics driver to the latest version and check result.
You might also want to switch to a non-Aero theme, restart the computer then switch back to a Aero theme and see if it helps.
More reference about Troubleshoot Aero problems in Windows 7:
http://support.microsoft.com/kb/976170/en-us
I would suggest you to post in the forum of Windows 7 for more effective answers:
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Thanks,
Ethan Hua CHN
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Bridge collapse when Preview window is used

Similar Messages

Maybe you are looking for