Bridge cs3 and content panel not showing all images

I am using Bridge CS3
If I scale my panel images down very small all are visible. If I enlarge the images beyond the visible area, a scroll bar appears. However if I move the scroll bar to the end, it does not show the last two images. I cant get to them
Any suggestions on what is happening

Did you ever find a solution to this problem. I am faced with same problem as detailed by you and here:
I do not see a great solution in the posts at attached link, other than perhaps resetting workspace.
Thank you,

Similar Messages

  • Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

    I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install.  The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years.  Lots of pictures in the 55 gb are not showing for some reason. 

    No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
    Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did

  • IPad not showing all images on websites

    I've been having problems with the iPad not showing all the images on websites. It tends to do it on forums with threads that are picture heavy. It will show the first few, then the rest will Be replaced with a blue icon with a question mark in it. Is there any way to fix this?

    Yes it is. y-3%3B-main-street-disneyland-hong-kong%3B-classic-revolution.html
    Safari is unable to load any more images, works fine on the desktop, but not on the iPad.

  • CS3 InDesign Stroke panel not showing

    I use CS3 on a MacPro.
    I've just found that the Stroke panel does not show in InDesign, so I cannot add or change the stroke on graphics.
    Unlike all [as far as I've explored so far] the other Window options, when I click on Stroke I do not get a full panel of options, only a thin (vertical) bar –presumably the left and right sides of the panel, collapsed together.
    This has never been a problem before and it happens in any choice of Workspace.
    Any ideas, PLEASE?

    Thanks Peter
    Sorry I didn't spot that your first message was a link to a solution.
    It worked fine. (I moved InDesign Defaults and InDesign SavedData to a temporary folder on the Desktop, started up InDesign again, and Stroke panel worked again. I was also relieved to find that, for instance, my Character and Paragraph Styles weren't lost, nor my Workspaces of choice. Without exploring too closely, all I've noticed is that Open Recent files have gone, which is absolutely no problem.
    Thanks again.

  • 2 issues in LI2,  slowing and freezing during developing, slideshow not showing all images.

    1. Lightroom Is slowing down during normal development.
    I only have 3500 photos in this catalog and am working on 50 to 200 photo in Raw format at a time,
    When Opening and beginning  a project the program worked fine but after a few hours of adjustments the program slows and then  freezes for minutes at a time forcing me to shut down the computer and restart.  I have a 1.5 TB hard drive and have moved the bulk of my files to a backup drive freeing up the MAJORITY of the hard drive for processing.  I have been threw the 8 ways to speed up Lightroom and an finding the problem persisting. IDEA'S?
    2. LI's Slideshow is not consistent in showing all the images.
    after going through the slideshow's setting and playing the slideshow, LI will show some photos and not others and start over at random order.  Idea's?

    Images that are edited in Photoshop will be displayed automatically in Lr only when the image-file saved in Photoshop is the same as the one opened from Lr.
    You say you open a JPG from Lr, then edit it in PS by - among other things - adding some layers. Layers are not supported in the JPG-format so you have to either save it as a psd or as a jpg-copy.
    In either case this is not the same image file as the one opened in Lr, so it will have to be imported into Lr to show up. If you would flatten your image after editing in PS and then do a <save> to your JPG - not a <save as> - it will show up in Lr.
    PS: the only exception is when you open a Raw image from Lr in PS and you save it in PS in the file format specified in Lr for external editing. The saved file will automatically show in LR.
    Message was edited by: web-weaver; PS added

  • Add a Property Dropdown menu in CSS panel, not showing all properties?

    So, I am sitting side by side at 2 machines...I have the same CSS style I created for a table. On the one machine, I go to add a property and choose border-collapse. All is fine. I go to the other machine and border-collapse is not there? Then, I realized the entire list is much shorter and is missing many properties? The shorten list starts with the background property...The long list on the good machine, starts with alignment-adjust (in other words, I am missing any property that starts with the letter many more).
    I trashed preferences but that didn't help.
    Has anyone else come across this problem?

    HI Murray,
    Sorry for the late reply...was one of those weeks....
    Anyhow...Both DW apps are running CS5? Ironically, U never checked my home machine also running 5, and my CSS panel also starts with background properties. So I am missing a bunch of them as well. It's very odd. The inly thing I can think of, Is I purchased a few CSS templates to work with and I wonder, if when I loaded them on that computer, they added those extra css properties?
    It's a mystery.....

  • Adobe Bridge CC Smart Collections are not displaying all images in the folder

    I'm having an issue with Bridge CC were I setup a smart collection to monitor my new photos. The folder contains over 300 photos, but is only displaying 160. The only condition I set is to have a minium file size of 10kb, so it should bring in all files since most are over 4mb. At first I thought it was a problem with the files themselves (permissions or something) but if I open the folder in bridge it easily displays all of the images easily. Any ideas?

    I'm having an issue with Bridge CC were I setup a smart collection to monitor my new photos.
    You might want to describe this workflow a bit more. Do you create this from an existing folder or are you adding new photo's?
    A Smart Collection does not refreshes it self automatically. You either have to use the edit icon top right of the content panel to save again or deselect and select the collection itself to let it refresh the content.

  • Safari Not Showing All Images

    This is a strange one!
    I was on home page yesterday and noticed a lot of ads. I then went to Safari Preferences/Extensions and discovered that AdBlock had been turned off.
    I then clicked on the Enable box to turn it on and all the ads went away, but in addition, a lot of images that are part of the website went away too.
    I then disabled AdBlock and the images and ads did not come back!
    Now with Adblock turned off, Safari shows no ads and select images from the website also are not visible.
    Please...How do I fix this?
    The problem is only with my MacBook Pro running OS X 10.10.1 using Safari 8.0, and appears to be limited to just the FoxNews website.
    If I use Firefox 34.0 there is no problem.
    If I use my other computer (iMac running the same operating system, set up the same way) there is no such problem.
    I have contacted FoxNews technical help and AdBlock tech help. No response yet.
    Any ideas?

    Well, I spent over 2 hours on the phone over 2 days with Apple tech support on this issue with no solution found.
    I also spoke with tech support from my service provider, again no solution.
    I am thinking of using OS X Recovery to  restore from a Time Machine backup, or do a clean re-install of OS X.
    Any suggestions will be greatly appreciated!

  • LR not showing all images on card during Import

    I have the latest version of LR.  iMac and Canon 7D.  With my camera tethered directly to my computer, I start the Import Photos process.  When the thumbnails begin to load, it seems like if I have a large amount of photos to import (from 8GB card), it always leaves off the last hundred or two (approximately).  They just don't show up.  I'll import what is visible, then go back and do another import immediately.  All the ones that have been imported show up as greyed out thumbnails, then the remaining images on card will be avavilable for Import.
    Why is Lightroom not seeing all the images the first time??

    Yes it is. y-3%3B-main-street-disneyland-hong-kong%3B-classic-revolution.html
    Safari is unable to load any more images, works fine on the desktop, but not on the iPad.

  • Extended Podcasts not showing all images

    I just noticed that the extended podcasts that I have, which include a number of images, only show the first image during the playing of the podcast. On the iPhone or iPod Touch, the same podcasts will sequence through the added images as necessary.
    Has anyone else seen this? Is there a preference that needs to be changed? Some other fix?

    I'm seeing the same thing with enhanced podcasts on my iPad. Initially I thought it might just be the enhanced podcasts I created some time ago, but I've since downloaded an enhanced podcast from early last week. Seeing the same problem in a more recent enhanced podcast.
    Chapters are working fine, but the images are not changing. Both enhanced podcasts work fine on the most recent iTunes.
    On perhaps a related note I am seeing other image issues in the iPod app on iPad (album art not showing up correctly, random album images showing up).

  • Bridge CS2 not showing all images

    After a crash of my PC (Windows XP  Home), I had to re-install Photoshop CS2.  Now, however, when I'm  trying to review images in Bridge (in filmstrip view) only some of the  thumbnails appear as photos; the remainder appear only as icons.  There  appears to be no consistency; some are PSD files, some are TIF files.  The rotating "clock hands" on the lower left (when images are loading)  do not even appear in those cases.
    Any idea how to get this back?  It's  really tough reviewing images when I can't even see them! 
    Thank you in  advance for your help.    --Dennis


  • Visualizer and CoverFlow is not showing, all black (not driver problems)

    Well I've installed the latest drivers for my Intel Media Accelerator graphic card which is integrated into my motherboard.
    Anyways it's still not working. The screen is black. It works on my other computer, and I can't seem to find anything wrong.

    I don't see what that would do... However I actually just recently installed 7.0.1 (never tried on the 7.0.0 actually) and it should be a new installation. The virus wasn't disabled during the install.
    I'll reinstall and see what it does - I'm just updating album artist right now so I'll do it in a few minutes and get back to you.
    And for that off-center thing, it seems like there's nothing on those covers either. And that disappears right away (it goes away one by one extremely fast. Then it's just black.

  • Spry Widget SlideShow Basic (IE8 not showing all images)

    Hi everyone:
    I've read through the past posts, trying to find the solution so I wouldn't have to bother everyone if the solution to my problem was already here.  I couldn't find it, although I did find similar posts about this problem but no out and out solution.
    My problem:
    I have added the Spry Image Slideshow-Basic into an .html page.  The widget works well in Firefox, Chrome, Safari and IE7!!  It does not work properly in IE8 as IE8 skips every second images...the even numbers.  It does not work on my local computer and it also doesn't work on the server.  I have uploaded all the files to the server and it still doesn't work properly.
    I cannot seem to find the solution and I am reaching out to the great Adobe supporters for help.
    You can see the test web page here:
    There are six images in this group but it only shows numbers 1, 3 and 5.
    Could someone please have a look and give me direction as to where the problem is?
    Thanks so much everyone.

    The problem is with the Spry.Widget.ImageSlideShow.PanAndZoomPlugin
    If you leave that out, then all is well
    A dirty fix is to add the following to the HEAD section of your document
    <meta http-equiv="X-UA-Compatible" content="IE=7" />

  • Iphoto shared album in iCloud not showing all images to my IOS devices bar Mac

    I created an album today with 118 pictures in it.  I shared with a  number of people using iCloud.  When I visited the album to show someone through my iPhone it only contains 20 images.  The same happens on my iPad.  In iPhoto when I select the album I see 118 images.
    Incidentally, when I create a new album in iPhoto it copies some images from the first album I created into it and I then have to delete.

    Have you tried this:
    Originally posted by adamnash on Oct 19, 2014 6:52 PM
    - I quit iPhoto
    - I launched System Preferences, went to iCloud, turned off Photo
    - I launched iPhoto
    - I verified that iCloud was off
    - I quit iPhoto
    - I went back to System Preferences,, went to iCloud, turned on Photo
    - I launched iPhoto

  • Process Chain got struck and not showing all the variants in the log view

    We have some process chains which are running daily.The problem here is that one of the process chains got struck at some point
    and it is not showing all the variants in the log view but able to see in planning view.
    Could any one please let me know why this is occuring.

    Hi Ramanjaneyulu,
    Thanks for the reply.
    As you said,i clicked on the 'display message' but it is not showing any errors.It is showing
    that the process completed successfully.

Maybe you are looking for

  • HDMI On Mac Mini Late 2012: Problem with hardware?

    Just converted from PC to Mac. Purchased latest mac mini (Late 2012 version) Have tried several monitors through HDMI port and each time the picture quality is poor with very bad text resolution. Have tried HDMI to HDMI  and also tried HDMI to DVI ad

  • Error Handling for CFQUERYPARAM

    Is there a way to display the value of cfqueryparam upon a database error?  For example: <cfquery name="causeError" datasource="#application.dsn#">       select street1 from house, #table2# where house.houseid = #table2#.houseid and house.houseid = #

  • A security comparison graph from Vanguard site does not print.

    When I go to "File, Print Preview" the graph and legend does not appear. The text above and below the graph does show. I believe the graph is produced using Adobe Flash. The graph prints fine when I use Internet Explorer.

  • Infoset confusion

    hello, i have a question about infoset. i have a infoset which has 3 objects 2 infoobjetcs and one dso. they all say left outer join and i know left out join means the value in the left object has to be in the right ones. how do i read this infoset?

  • TouchSmart Envy 15 Ghost Clicks

    Hi, I need to get this thing on record somewhere -- My HP Envy 15 TouchSmart E3S19UAR has had a ghost-click problem with the TouchScreen since day one. I've done everything recommended on these forums (and elsewhere), including all updates, ground-up