Bridge CS4 does not see ACR presets in Develop Settings

I think that this is new with CS4. I create a Preset in ACR in the Preset Panel. That Preset works fine on photos in ACR. The Preset is listed in the Camera Raw Settings folder in the Finder.
But, when I try to apply the Preset in Bridge via Edit > Develop Settings, the Preset does not appear. Is this correct? I believe that a preset did appear in CS3 in Bridge Develop Settings.
The preset was created with a Raw file from the 1DS MkIII. Could it be camera-related?
Am I missing something here?
Thanks,
Sonny

Strange. I Quit Bridge. Relaunched Bridge, and the Presets now appear in the Develop Settings list.
I presume that I should not have to Quit and relaunch for the presets to appear?
I created another preset. It only appeared in Develop Settings when I again quit and relaunched Bridge, even though it appears in the Camera Raw Settings folder.
Sonny

Similar Messages

Bridge CS4 Does Not See External Drive

Very suddenly, Bridge is not seeing the external USB connected driver I use to store recent photos. I read a similar message here and the writer was told to add the drive to favorites. That appeared to work for him, but I could not do that since the folder doesn't appear under Computer in the favorites section either. The drive appears in Windows Explorer. I am using Vista 32. Any suggestions?
Fran

Did you power up or connect the external drive after Bridge had been started? I've observed that Bridge only includes drives that were attached and active when Bridge was launched; it does not add a drive to its folders list if that drive is started after Bridge is active. With your external drive on (and appearing in explorer) try exiting and relauching Bridge.

Phototshop CS4 does not see all of 8GB my RAM memory

I have not posted anything on this site. I have a 27" 2.8 Ghz quad core i7 iMac and CS4 does not see more then 3 GB of my system RAM I have 8 GB of RAM.
It shows up on my info screen I am running 10.6.2 and CS4 is suppose to be running in native 64 bit mode with Snow Leopard 10.6.2? I am at a lose and I do not know what to do?
Kristyanna Virgona
Dunsmuir, CA

It shows up on my info screen I am running 10.6.2 and CS4 is suppose to be running in native 64 bit mode with Snow Leopard 10.6.2?
It is not.
Please read »Allocating Memory with 64-bit Processors« here:
http://kb2.adobe.com/cps/404/kb404440.html

Adobe Bridge CS4 will not launch ACR

I'm getting this message when trying to open an image from Bridge CS4 in ACR,
"Camera raw requires that a qualifying product has been launched at least once to enable this feature"
Any ideas how to cure this, I've downloaded the update 5.2.2., what is the correct location for this? Automatic update is just opening a box withe file in and I cant find the previous.
By the way ACR opens fine from Photoshop CS4.
Thanks
Philip James

Philip:
This has been discussed in the Camera Raw Forum: you may need to install the new ACR 5.2 plug-in in the correct place manually.
Eric Chan, "ACR 5.2 not installing in CS4" #1, 30 Nov 2008 9:17 am

Bridge CS4 does not open in last folder user

Bridge does not open all of the time in the last folder used. It will open in a previous folder.
Any ideas?

You need to exit Bridge before shutting down for a return to your last folder.
I think it should automatically exit when you shut down so you will return to the folder you were last using.
This occurs when you have bridge set up to launch at start up, which is great in itself.
CS4 bridge is so improved from CS3 in speed and reliability..thanks to Adobe!
D

Adobe PS CS4 does not "see" my USB Drives in Finder

For some bizarre reason, PS CS4 is no longer "finding" my USB 2TB drive in the Finder/Devices window on my iMac (nothing is showing in devices). However, it is seeing my my WD NAS drives, and if I go into Finder on my own, it shows the USB drives. The WD drives are a 2TB MyBook, and a 3TB MyCloud. I have had some issues with _those_ drives showing up in Finder but its usually a WD firmware issue... and its usually the older MyBook drive that gives me problems. Anyway... the aforementioned 2TB USB drive also appears (as it should) on the RHS of my iMac screen. The drive is working just fine, and I have tried powering off the computer and the USB drive... still doesn't show using Photoshop. I can search within finder for the file I want, and right-click to open in "Adobe Photoshop" but I'm so used to grabbing, editing, and saving files from within CS4 that I'm baffled that this drive all of a sudden can't be "seen" from within PS CS4. Previously it had been, so I have to assume its some settings or preferences issue?

As noted above, I am now able to "see" the missing USB drive(s) in Finder so that seems to be resolved. However, a few new issues have cropped up:
1. Not all my installed fonts are in my font listing, but I'll assume I can easily remedy that by activating them (I hope). I have the sneaking suspicion I deleted some by mistake.
2. Safari seems to have gone weird... the upper section is flashing like crazy when I try to type in a URL, also the sidebars flash when I scroll up or down with mouse. I've installed Chrome so I have a stable browser for the time being.
3. No matter what I seem to do in preferences, every new image I open does so within the same window so I have to manually drag it out to compare images. How do I fix that permanently?
4. When I first opened PS this morning I kept getting some sort of error popup that couldn't complete the request?
Is it safe now to remove the new user account?
Mike

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand.

I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand, thanks.

What edition of LR 5? What edition of ACR does PSCS 6 contain. If they are not parallel (same edition number x in [5 or 8].x ), is LR making a tiff or psd rendition of the image?

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please.

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!

Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry

Extension manager does not see all of my adobe programs?? What can i do without reinstalling????

Hello i needed to install an extension for dreamweaver and for some reason extension manager does not see all my adobe programs. How can i fix that without reinstalling the programs?
Here are my Bridgetalk Diagnostics if it helps:
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 69ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[12:58:04]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 12:58:05
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[12:58:04]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:mac3334
Timeout = 13:08:04
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 12:58:04
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 7
Connector = PCD
Installed: 0
Running: 0
fireworks-12.0:
Group = cs
Path = /Applications/Adobe Fireworks CS6/Adobe Fireworks CS6.app
Display Name = Adobe Fireworks CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.Fireworks
Status = (not running)
ExeName = Adobe Fireworks CS6.app
aftereffects-11.0:
Group = cs
Path = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app
Display Name = Adobe After Effects CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.AfterEffects
Status = (not running)
ExeName = Adobe After Effects CS6.app
audition-5.0:
Group = cs
Path = /Applications/Adobe Audition CS6/Adobe Audition CS6.app
Display Name = Adobe Audition CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.Audition.5.0
Status = (not running)
ExeName = Adobe Audition CS6.app
bridge-5.064:
Group = cs
Path = /Applications/Adobe Bridge CS6/Adobe Bridge CS6.app
Display Name = Bridge CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
BundleID = com.adobe.bridge5
Status = (not running)
ExeName = Adobe Bridge CS6.app
estoolkit-3.8: PUMPING
Group = cs
Path = /Applications/Utilities/Adobe Utilities-CS6.localized/ExtendScript Toolkit CS6/ExtendScript Toolkit.app
Display Name = ExtendScript Toolkit CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = ON
Status = PUMPING
Info:
Group = cs
Version = 2.0
Build = ES 4.2.12
Next serial number = 47
Logging: = OFF
Now = 12:58:04
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 76ms
Last pump = 270ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=1ms, left=29ms
Timeout = undefined
Handler = undefined
ExeName = ExtendScript Toolkit.app
exman-6.0:
Group = cs
Path = /Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.app
switchboard-2.0:
Group = cs
Path = /Library/Application Support/Adobe/SwitchBoard/SwitchBoard.app
Display Name = SwitchBoard 2.0
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
Status = (not running)
ExeName = SwitchBoard.app
Installed: 6
Running: 1
Groups: 119
cs3:
acrobat-8.0
aftereffects-8.0
soundbooth-1.0
bridge-2.0
contribute-4.5
devicecentral-1.0
dreamweaver-9.0
encore-3.0
estoolkit-2.0
fireworks-9.0
flash-9.0
illustrator-13.0
indesign-5.0
indesignserver-5.0
incopy-5.0
photoshop-10.0
premiere-3.0
stockphotos-1.5
audition-3.0
cs4:
acrobat-9.0
aftereffects-9.0
soundbooth-2.0
bridge-3.0
contribute-5.0
devicecentral-2.0
dreamweaver-10.0
encore-4.0
estoolkit-3.0
fireworks-10.0
flash-10.0
illustrator-14.0
indesign-6.0
indesignserver-6.0
incopy-6.0
photoshop-11.*
premierepro-4.0
audition-4.0
ame-1.0
exman-2.0
cs5:
acrobat-9.0
aftereffects-10.0
soundbooth-3.0
bridge-4.0
contribute-6.0
devicecentral-3.0
dreamweaver-11.0
encore-5.0
estoolkit-3.5
fireworks-11.0
flash-11.0
illustrator-15.0
indesign-7.0
indesignserver-7.0
incopy-7.0
photoshop-12.*
premierepro-5.0
audition-5.0
ame-2.0
exman-3.0
flashbuilder-4.0
flashcatalyst-1.0
ts1:
captivate3-en_us
captivate3-fr_fr
captivate3-it_it
captivate3-ja_jp
captivate3-es_es
captivate3-de_de
ts2:
captivate-4.0
el2:
captivate-5.0
as1:
acrobat-10.0
ts3:
robohelp-9.0
framemaker-10.0
cs55:
aftereffects-10.5
audition-4.0
bridge-4.1
contribute-6.1
devicecentral-3.5
dreamweaver-11.5
encore-5.1
estoolkit-3.6
fireworks-11.1
flash-11.5
illustrator-15.1
indesign-7.5
indesignserver-7.5
incopy-7.5
photoshop-55.*
premierepro-5.5
ame-2.5
exman-5.5
flashbuilder-4.5
flashcatalyst-1.5
switchboard-2.0
el25:
captivate-5.5
cs60:
aftereffects-11.0
audition-5.0
bridge-5.*
contribute-6.88
devicecentral-4.0
dreamweaver-12.0
encore-6.0
estoolkit-3.8
fireworks-12.0
flash-12.0
illustrator-16.*
indesign-8.0
indesignserver-8.0
incopy-8.0
photoshop-60.*
premierepro-6.0
ame-6.0
exman-6.0
flashbuilder-4.52
switchboard-2.0
prelude-1.0
speedgrade-6.0
el60:
captivate-60.*
ts4:
robohelp-10.0
framemaker-11.0

Same issue. Doesn't see Dreamweaver.

Photoshop CS3 allows me to enable Open GL but CS4 does not Brand new MacPro with ATI 4870 card

Hi,
I just bought a brand new 8 core Mac Pro and have both the ATI 4870 graphics card and the Nvidia GT 120 card. Pshop CS3 allows me to "enable openGL" in the prefs and utiizes it when doing 3d stuff... however, CS4 has it dimmed in the prefs, thereby not allowing me to check it (it is dimmed and unchecked I should say) and when I do 3d stuff a dialog box saying
"Your video card does not meet the requirements for hardware-accelerated 3D rendering. All 3D will be rendered with software only."
any thoughts?
thanks in advance.

yeah, short term test deems keeping both cards in.
So, here are the results: Notes: I have 2 monitors, an Apple 30" and Apple 23". The 30" can only be used in the dual link dvi port and NOT the Mini Display port. Second: The ATI 4870 seems to have an issue with the Mini Display port, it does not work, alone or in tandem with the dual link dvi port being used. Apple is replacing the card (heretofore, I had no cause to use the Mini Display port on the 4870 at all) Third: Only Photoshop CS4 extended was used to see if the card was detected and if it had enabled Open GL
ATI 4870 - dual link used, Mini Display NOT used: Photoshop sees the card and enables Open GL
ATI 4870 - dual link used, MIni Display used: didn't test because Mini Display port did not work.
ATI 4870 - dual link NOT used, Mini Display used: didn't test because Mini Display port did not work
Nvidia GT120 - dual link used, Mini Display NOT used: Photoshop sees the card and enables Open GL
Nvidia GT120 - dual link used, Mini Display used: Photoshop does not see the card and thus Open GL is NOT enabled.
Nvidia GT120 - dual link NOT used, Mini Display used: Photoshop does see the card and Open GL is enabled
ATI 4870 Dual link used, Nvidia GT120 Mini Display used: Photoshop does not see a card and Open GL is NOT enabled.
ATI 4870 Mini Display used, Nvidia GT120 dual link used: did not test because ATI Mini Display port did not work

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

Notebook does not see mPCIe card (asm1061)

Aloha Community,
i am using an old notebook as a small server (cups/ftp/http/etc).
The Notebook is an old Dell Inspiron 1520.
I attached three 3,5'' HDDs to it which are powered via an external PSU.
the first HDD is connected to the original sata-port.
the other two are connected to a ASMedia ASM1061 Sata-controller. This controller sits on a small mPCIe card which i fitted on one of the three mPCIe slot the Notebook offers me (i tried all three).
In Bios all mPCIe-Slots are activated, still the OS does not see the HDDs.
also lspci seems not to see the card. Any ideas?
arne in ~/ > su arne
Passwort:
+ OS: Arch Linux x86_64
# Hostname: Yoshi
### Kernel Release: 3.19.0-gbdccc4e
##### Machine Hardware name: x86_64
###### Uptime: 0:26
; #####; Packages: 1257
+##.##### Processor Type: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
+########## Root: 572G / 917G (62%) (ext4)
###############+
.######; ;###;`".
#########. .########`
#' `#
[arne@Yoshi ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
[arne@Yoshi ~]$
hope you guys can help me!
greetings
Last edited by arch-serv (2015-02-14 00:46:53)

that's the problem i guess... according to the bios settings all mPCIe slots are enabled, still the card does not show up.
arne in ~/ > lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1,9M 0 part
└─sda2 8:2 0 931,5G 0 part /
arne in ~/ > sudo dmesg | grep -i sata
[sudo] password for arne:
[ 0.511917] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 0.524037] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 26
[ 0.524043] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 26
[ 0.843388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.843416] ata3: SATA link down (SStatus 0 SControl 300)
arne in ~/ >
even without the correct drivers the card shoud show up in the output of lspci shouldn't it?
greetings

HP Notebook 9628nr does not see DVD Drive no optical drive in device manager

for some reason it does not see the dvd drive this happen after I flash the bios which was recommended from the HP website can anybody tell me how to fix this problem

Im having a problem like this, DVD not appeare in my computer and system devices, after that a webcam will broken also( unknow device USB); solve: damaged motherboard, one of bridges- north probably
regards
and watch your motherboard properly

HT201269 itunes cannot see my iphone backup. I have a backup of the backup on an external HD, but even tech support cannot figure this one out. I copy and paste backups into the correct folder but itunes still does not see it. All I need are my contact

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Sorry for short novel I am writing. I just wanted to cover as much backround as possible.
So, here it goes. I backed up my iphone 4 after renting a movie. The movie only played the starting credits before I was called on for daddy duty. A few days later the movie would not play, so I restored my phone from my backup. The movie would still would not play so itunes support refunded my purchase and ended my viewing privileges for that rental after verifying that I had not viewed the movie. I then had a problem with my contacts showing up twice in the contacts list after the restore. So I attempted another restore. All was well at this point. I then started having trouble with my pc and decided to copy the internal drive to an external source. A week later I had a system failure and did a factory restore on my computer. I re-installed itunes and tried to copy and paste the old backup into the new itunes. Now itunes just flat out does not see the backup file (I failed to mention that I did a factory reset on the iphone after the last backup, hopping to start fresh). Tech support had me uninstall and re-install itunes and then copy and paste the old backup into the newly installed itunes with no luck. The files are all there, but itunes just doesn't see them (itunes says the device has not been backed up to the cloud or to the local machine). We then tried backing up the factory restored iphone and replacing that restore file with one of my old backups on the external drive. Ok, this is where it gets weird. We replaced the guts of the folder but left the folder itself so itunes would continue to recognize the new backup folder with the old files. Whoohoo, itunes now see's a backup folder full of old files, or so we thought. The new files were deleted using shift delete so they would be gone for good and not mix with any files or folders. When I restore my phone, it restores the files that were deleted from the restore file (pause here for a moment and imagine the stupid look on the face of tech support and I while we silently wonder how files that were permanently deleted were restored). This left tech support and I both scratching our heads. My service issue was escalated to the next level. I waited for the phone call the next day that was scheduled at 10am to my wife's phone, but the call never came through. As usual, apple disappoints again. I just bought an iphone 5s and still have the iphone 4, and am looking for a solution to retrieve my contacts and restore to the 4 or 5s. I am guessing that files in other folders must be associated with the iphone backup in order for itunes to retrieve the files. Any ideas or support in retrieving my contacts would be greatly appreciated.

Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

Logic does not see my hd omni as an input device. Any ideas? I've been told to reinstall logicpro - but apple won't let me because it says its already installed on this machine.

I'm having the same issue with a file called IMG_2353.MOV that was imported into iPhoto from my iPhone and also have to manually select the items to import (so the rogue file doesn't error everything out). I've tried using Image Capture to locate/delete the file directly from my iPhone, but even though I can SEE it in Image Capture, I can't delete it or anything. This is VERY frustrating! My friend/Apple guru's only suggestion was to backup my phone then restore it through iTunes. Risky but should do the trick. I'm too scared to try, though!

Bridge CS4 does not see ACR presets in Develop Settings

Similar Messages

Maybe you are looking for