Bridge Does Not Automatically Bring Up Photoshop When the Photo is Double-Clicked

I have just purchased CS4 with Bridge for my new MacIntosh.  In Bridge for the PC, when I double click a photo it automatically brings up Photoshop.  On the Mac version, it gives me an error message saying that part of the application is not loaded.  I completely uninstalled the program, and reloaded the application and still get the same message.  So in Bridge on the Mac, to get around this, I right click the picture and go to "Open With" and there are two entries:  "Open with CS4 (default)" and "Open with CS4."  This works if I pick either option.  My Windows version only has "Open with CS4 (default)" as the option.
I called Adobe support (in India?) with no solution.
I really like the double click option rather that using the pop-out menu choice.  What is wrong with the Mac install, and how can I fix this issue?

Thank you for your help.  I updated the software and it "healed" itself.
Best regards,
Gregory T. Stramat
[email protected]
801-978-4735 (Office - Preferred)
801-652-0775 (Mobile)
Omke Oudeman <[email protected]>
01/22/2010 12:52 AM
Please respond to
[email protected]
To
Gregory Stramat <[email protected]>
cc
Subject
Bridge Does Not Automatically Bring Up Photoshop When
the Photo is Double-Clicked
This might mean that you have either 2 installs of CS4 (one on an other
disk?) or you did not use the the default application folder on root level
but have it installed in the user account application folder. Could you
check this?
and go to "Open With" and there are two entries:

Similar Messages

  • Since upgrading Iphone to iOS 5.1.1 it does not automatically use wifi internet when wifi is available. It has been draining my mobile data. I can only manually change settings with cellular data everytime I get home. Any other solutions?

    Since upgrading Iphone to iOS 5.1.1 it does not automatically divert to my wi-fi internet when wifi is available in my home. It has been draining my mobile data I  now have very high bills from my mobile carrier for high data usage. I can only manually change settings in the Network and turn cellular data on and off everytime I get home and leave the home. This is very frustrating as it wasn't a  problem until the upgrade. I have spoken to a few people that this has happened to. Has anyone found this problem and does anyone have other solutions?

    Please disregard this question. I'll submit a shorter and more direct question. Thanks.

  • Does not automatically switch to space when app is selected

    In reality this is not a new issue   been pretty much always this way
    Running 10.10.3 on Min with 16 g RAM
    They article OS X Yosemite: Work in multiple spaces    say that once i configure mission control when I select an App  I will be automatically switched to the space/desktop  (They can't seem to keep their terminology consistent ) which i have assigned that app to   (yes the options are set for that app to open in specified desktop and monitor)  Ok when I select that or any assigned app The app comes up in the upper tool bar  but the desktop does not change .   I must manually switch the desktop
    PITA

    System Preferences/Mission Control - is the second box down checked?

  • Keynote presentation does not automatically play upon open when called from another keynote presentation

    I have a master keynote presentation that hyperlinks to other keynote presentations.  The called keynote presentations open, but do not automatically play even though I have marked them to automatically play upon open.  What am I doing incorrectly?

    Automatically Play on open, has the same function as pressing the play button in the tool bar.
    Once the presentation is playing,  it will move to the next slide  depending on
    how you have set the options in:
    Inspector > Document > Presentation
    the choices to advance to the next slide are:
    normal           - requires a keyboard press or a muse click to advance
    Hyperlink       - requires the mouse to click on an object with a hyperlink
    Recorded      - plays back using the recorded narration sound track
    Self-playing   - will advance according to the options in the delay times set in
    Inspector > Document > Presentation

  • QuickTime does not automatically open video clips when double clicked

    Quicktime does not open video clips in iPhoto when the video clips are double clicked (nothing happens). Quicktime will open the video clip if I open quicktime
    and ask it to open the video clip. Regular photos will expand as they should when they are double clicked.

    It worked. I don't see why the Protected Mode is enabled in the first place, if it were to cause issues.
    Anyways, thanks Sabian,

  • HT3302 The very bottom of the touch screen on my iPhone does not respond to touch. When the touch screen fails, is is expensive to replace?

    Recently, the bottom edge of the touch screen on my iPhone stopped responding to touch. I have gone through all of your hints and tips in the service information pages to see if there was a DIY solution. The little 'dots' which indicate water damage are white. I checked those in case someone else had caused water damage to my phone, as I do not live alone. The home button works fine, the non-functioning area of the screen prevents me from using all functions for which the screen will not revolve to the side when the phone is tipped.  Texting is a nightmare, as I have to keep turning the phone to access certain alphnumeric icons on the keyboard. Is this a common problem with the iPhone 4? Is is expensive to repair?

    Before you claim the hardware failed, try basic troubleshooting as described in the User's Guide of reset, restart, restore (first from backup then as new).
    If none of these resolve the issue, Apple offers and Out of Warranty replacement for $149US.

  • Photosmart C4180 does not pick up 10x15 photopaper from the photo paper cassette

    What can I do to get the printer to pick up 10x15 photo paper from the photo paper cassette? It wil only print when feeding one piece of photo paper at a time. This is tedious and annoying. No problems with ordinary paper.

    Hello Mr. Wilks,
    I am sorry to read about the issue you are having with your new Photosmart 6520 not picking up 4x6 paper. I understand you have cleaned the rollers and that did not resolve the problem. I have researched this and have found a couple of documents that I recommend you look at to ensure all of the print settings are correct when printing on a 4x6 or any other size you wish to print on.
    I am unsure if you have a Windows or a Mac computer, therefore I will post 2 different links for you to look at depending on which operating system you have.
    Here is the document for troubleshooting on Windows: Printing Photos Saved on Your Windows Computer
    Here is the document for troubleshooting on a Mac: Print Photos Saved on Your Computer (Mac)
    I really hope this helps you, feel free to respond if there is anything else I can help with!
    Regards,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Time Machine does not automatically delete old backups when drive is full

    I back up to a 1TB external drive with TM.  It will not delete old back-ups and instead tells me that the drive is full.  I thought TM was supposed to manage all of this on its own.

    It will, if it can.  But it will never delete your last remaining backup.
    See #C4 in Time Machine - Troubleshooting, probably the pink box there.
    Basically, if Time Machine has to do a full or very large backup, and your Time Machine drive isn't well over twice the size of the data it's backing up, there won't be room for the last backup, plus the new one, plus some workspace.

  • HT4623 My iPad does not have a software update like the photos.  Any suggestions?

    I read the instructions to update my iPad.  I am trying to upgrade the software.  When I open the utilities and go into settings, I do not have the software update window.  Any suggestions?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT5653 the import photo button does not work!  so I see the photos but cannot import them?  Need help

    after connecting i5 to MAC my photos will show but cannot push import button to initiate.. This is first time it does that.  Need help to transfer and save my photos from my iphone

    Can you do it with Image Capture (in your Applications Folder)

  • Aironet 1310 bridge does not reestablish connection

    We have an aironet 1310 bridge installed (root/non root) where the non root drops sometimes the signal when the morning sun is in direct line with the link. This blackout problem is known. What bothers me is the fact that the bridge does not automatically reestablish the association...
    Once it has been lost we have to restart the Air 1310, then it re-associates. Is there a workaround or an automatism?
    Thank you for your suggestions.
    Bert

    This should be automatic. I had a client have this problem once, and we found that the problem was actually with the 1310 being configured in diversity mode. The 1310 would disconnect in tough weather conditions and try to connect to the little metal stub that comes on the bridge. The signal was too weak to establish a good connection, but for some reason it would not switch back.
    So check to see if you have diversity mode enable, and disable it if it is. If that's not the problem, I'm not sure what it could be. Have you tried upgrading the IOS?

  • JDBC-ODBC Bridge does not support Unicode UTF-16

    Hi
    I'm using Jdeveloper 10.0.3 IDE in order to develop an application for data transformation between MS Access 2003 (source) and Oracle 10g (destination). Clients use Windows XP.
    JDBC-ODBC Bridge still does not support Unicode UTF-16 which is the Charest used by MS Access 2000/2003.
    Note that when I changed locale in regional setting, destination Connection to Ora10g failed to open a connection, it works only with English locale, so I can't change my locale information.
    How can I read Unicode from source DB?
    Any help would be appreciated. I look forward to see your response.
    Thanks,

    i also heared that JDBC-ODBC Bridge still does not support Unicode UTF-16,
    but i guess this is not in my case.That's the key in fact. JDBC-ODBC Bridge does not support UTF-16, which is the charset used by MS Access 2000/2003.
    or do i need to use a third party driver for jdbc odbc bridge?Free library at http://jackcess.sourceforge.net/
    Commerical JDBC driver at http://www.hxtt.com/access.html
    Yonghong Zhao
    System Analyst
    www.hxtt.com

  • ITunes does not automaticly start on connecting iPhone.

    As above really, when i connect my iPhone 3G iTunes does not automaticly come up and sync the phone like it used to.
    I now have to connect the iPhone and them click on iTunes.
    Any ideas how to change this back, i've checked the iPhone settings in iTunes and 'Automaticlly sync when this iPhone is connected' is ticked.

    If you go into itunes preferences, click on devices - make sure that the disable automatic syncing for iphones and ipods is not ticked.

  • Wicd does not automatically connect to eth0

    Wicd works fine using my wireless network. It does not automatically connect to eth0 when I plug in a cable, but I can connect to it by pressing connect manually.
    I already have ethtool installed (do I need to run ethtool as a daemon???)

    stabele wrote:I have two maybe naive question:
    1)are you connected to wireless network before you plug in ethernet cable? If yes, than wicd does not automatically switch to wired network. Maybe you can get it done by custom scripts wicd support for each connection, but I never used this thing in wicd.
    2) do you have disabled in rc.cong interfaces you want wicd to manage INTERFACES=(!eth0 !wlan0) ?
    Thanks for your answers, 1) no I'm not connected to wireless, and 2) eth0 is disabled.
    I found out it works fine if I connect eth0 manually and then I can remove and plugin the cable all I want and it automatically connects. This is because dhcpcd is already running for eth0 so maybe I should run dhcpcd eth0 in a boot script (although I think wicd should do this).

  • Why when using Adobe Bridge,  I apply a star rating,  the rating does not show up in Photoshop Elements? [tags]

    Why when using Adobe Bridge,  I apply a star rating,   the rating does not show up in Photoshop Elements.  I use Elements as my organizer and Bridge to view as it is much more user friendly.  Anyone any solutions??

    Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

Maybe you are looking for