Brightness Control Hotkeys are not working after windows 10 Update

Hi Experts, I am Using HP Pavilion 15-NOO3TXRecently I Updated Windows 10 from Windows 8.1All Drivers are updated Sucessfully.I have Intel Graphics and AMD Radeon HD 8600both are also updated Sucessfully. but F2 and F3 hotkeys are not working for brightness adjustments.when i Unistall AMD Radeon drivers then hot keys are working properly(only with intel graphics)  Please Take a look for my Drivers But in Video Memory it showing only 128MB Dedicated Video Memory   I Installed AMD Drivers using autodetectutility.exe from AMD Website.how can install both AMD Radeon Drivers and brightness hotkey adjysutment. 

Hi Erico,I tried your method It says The best driver software for your device is already installed I Used this tool http://www.techspot.com/drivers/driver/file/information/16748/and I cleaned up all display drivers.windows searched in updates for drivers and updated all video drivers.now brightness control key is workingbut when i checked dedicated video memory it says 128 MB.but my dedicated video memory in 1024 MB.Take a look for Video memory

Similar Messages

  • Beats Audio Control Panel software not working after Windows 10 upgrade.

    Beats Audio Control Panel software not working after Windows 10 upgrade.  the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties  I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device?  IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

    Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at  https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver.  I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update.  After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

  • Most applications are not working after software update-HELP!!!

    HI,i have a 4 years old macbook which i upgrade couple of month ago with snow leopard to use it with my iphone...everything was fine,all applications were working until i did the software update today!!!now almost NOTHING works,no skype,no itunes,no msn..etc..when i try to open an application,it shuts down!!!ANY IDEAS???

    The normal best practice for any update:
    backup
    repair your system
    insure you have a working bootable backup clone
    restart once in safe boot mode
    and only then apply updates
    repair permissions (but ONLY from current system version, not from earlier version, so skip using original OS X Snow Leopard DVD even)
    Also check the "Using Snow Leopard" forum. There are always a few/some who seem to have problem, but unless you have something that 'broke' and does not work with this update, it was an underlying issue, "waiting to happen" so to speak.

  • Access 2010: ListBox (Forms 2.0) not working after Windows Update

    After one of the updates attached was installed the following VBA-Code line causes an error on Windows 7 using Access 2010:
    Me.lbCountries.AddItem rst("Country")
    lbCountries is a  ListBox (Forms 2.0) using
    class: Forms.ListBox.1
    OLE: Microsoft Forms 2.0
    MultiSelect: Multi
    ListStyle: Option
    The code is still working using Win8 (x64) and Access 2013. On Win7 (x32) and Access 2010 the following error is displayed:
    „Object doesn't support this property or method“
    (Error Code 438)
    After manual deinstallation of the mentioned updates the VBA-code executes as expected. ListBox seems to be unusable after one of the updates. All other workarounds trying to fill the ListBox cause the same error.
    Fast Help is very appreciated.

    Hi,
    Would you please to tell us which KB caused this issue? As far as I know, after installing
    MS14-082 (part of December 2014 Public Updates for Office) you might get the error run-time
    error '438': Object doesn't support this property or method, when clicking on the enable content button.
    If you have installed MS14-082, please try to install the hotfixs that released in the March 2015:
    http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2014/12/13/forms-controls-stop-working-after-december-2014-updates-.aspx
    Hope it's helpful.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Satellite c55 - wifi not working after windows update

    Laptop is running windows 7.  Laptop rebooted itself and did a windows update, once i logged into it, the wifi is not located.  This is the update that ran today. Update for Windows 7 for x64-based Systems (KB2952664)Installation date: ‎7/‎28/‎2015 11:44 AMInstallation status: SuccessfulUpdate type: RecommendedInstall this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.More information:
    http://support.microsoft.com/kb/2952664Help and Support:
    http://support.microsoft.com Help!

    Kim, a Restore point should have automatically been made by Windows BEFORE processing the update. You should run System Restore using that restore point and then HIDE that update so that it isn't ever installed again.

  • Keyboard mouse not working after Windows update

    Question was asked and supposedly answered b4, but didn't tell how to work around no keyboard or mouse. Ie: how do u get to device manager without keyboard/manager? I unplug to reboot and up down keys work in startup. However, when I open in safe mode, keyboard and mouse still don't work.
    Windows 7- 64 bit
    could an external mouse wk?

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    According to the message you have posted I suspect this could be because of the recent changes made if any
    Note: You can use an External USB Keyboard and Mouse if in-built Notebook Keyboard is not working
    Please perform the below shown steps to resolve the issue:
    Step 01. Turn OFF the PC
    Step 02. Power ON the PC and keep tapping F8 Key
    Step 03. Select "Last known good configuration" from the Advance Boot Option list
    Note: Wait till you get to the Windows Desktop
    Step 04. Please remove unwanted startup items and uninstall unwanted applications
    Step 05. Please reboot/restart the PC the normal way
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Wireless router not working after Windows update

    I have a WRT54G V.5 wireless router. Windows Vista Home Premium did an auto update. Now wired connection works, wireless does not. Asks for key, but when entered nothing happens. Diagnosis states action was canceled. I have disabled and enabled, does not fix. Any help will be appreciated! 
    Solved!
    Go to Solution.

    Take not of the Wireless Settings(SSID and WEP/WPA Key) on your Router...
    To know the Wireless Settings follow this link
    Once you know the Wireless Settings attempt to connect to your Wireless Network...
    XP :
    Click on Start and goto the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.
    Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
    Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
    Now it will give you the opportunity to put the network/wep key, make sure you enter the correct network key and confirm it...
    It will connect...
    Vista :
    Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
    Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
    It should connect...Once you are connected you should restart the computer, it should connect to Internet...

  • Push messages are not working after iOS6 update

    After updating my iPhone 4 to iOS6, push messages of apps like facebook, facebook messenger, whatsapp, google voice have stopped working in sleep mode.
    I get mesaages only when I open the application.
    I have tried to factory restore, install all the applications once again, sync phone from iTunes but no use.
    Do anyone know why this is happening and what is the solution?

    scotth63 wrote:
    When you say delete firmware.. do you mean selecting reset on the phone and choosing erase all content and settings? Or actually going in to the phone to delete it?
    I didn't try resetting the phone first, I can try that.
    You can try that but that's not what I meant. The firmware gets save in your iTunes library os not matter how many often you restore your phone it will always restore from the firmware from your library. This firmware could have issues and as long as you restore from it it is more than likely you will keep having the same problems.
    Here's how it works:
    Mac:
    Go to Finder> library>iTunes>iPhone software update.
    There you will se the firmware version of your phone, Delete it and then restore. Note that now when you restore the phone, iTunes will re-download a new fresh firmware.
    Windows:
    Go to C:\Documents and Settings\user\Application Data\Apple Computer\iTunes\iPhone Software Updates.
    apply the same procedure described above and you'll have the same result.
    If are a windows user, when you get to the Documents and Setting folder, make sure that you select the option to view hidden folders from TOOLS> FOLDER OPTIONS> VIEW>SELECT VIEW HIDDEN FOLDERS so you can see the application data folder in case its not visible. And remember to sync as new phone
    I would recomend doing this first.
    Hope this helps and good luck.

  • Fly out tool menus are not working after latest update-help?!

    Attempting to click/hold click is not expanding the tool fly out menus in Illustrator after the latest update. I did discover that alt + left click will rotate tools, but I would still like to be able to access the fly out menus. Any help would be appreciated!

    ''tenderprey [[#answer-668426|said]]''
    <blockquote>
    So, it sounds like there's a compatibility problem. I didn't realize that Firefox accesses Silverlight in a whole different way. Do you think Firefox needs to be updated/patched to be able to work with the Silverlight plugin again, or does the plugin need to be updated to be compatible with the latest version of Firefox?
    </blockquote>
    First of all, I´m not a IT guy...just a fan of "firefox".
    Regarding your question, since this issue started with the 34.0.5
    version of "firefox" it´s my opinion that it´s "firefox" the one that
    should be updated/patched to work again with "netflix".
    to fix such issue.

  • 1080p videos not working after fp2 update

    some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks

    What is the phone model?
    Could you give us the url to the video on question?

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

    my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

    Welcome to the HP Forums  MillaMagia,
    I see by your post that the USB isn't being recognized.
    I can help you with this issue.
    Are you using the same USB cable? (known good USB cable)
    You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
    USB 3.0 are supposed to be backwards compatible.
    Try another USB port on the Laptop, some of the USB ports are more powered then others.
    I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
    Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
    How do I get into Windows Device Manager?
    Here is a document for Identifying problems in Windows Device Manager.
    Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
    Let me know how it was listed. (screen shots welcome)
    If this is a Laptop then check the power management settings.
    Access the device manager. Windows 8-How do I access the Device Manager.
    Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
    Disconnect the USB, run the full uninstall and reinstall the printer software again.
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • The music buttons in the control centre are not working ,What should i do to get them working

    the soft music buttons in control centre are not working,
    what should i do to get them working

    Try trashing  apple.com.dashboard.plist from preference library and restarting Mac.
    Quit all applications.
    Open Finder- Click the left most icon on the Dock.
    Holding option key click the Go menu from the menu bar.
    Select Library and then Preference folder.
    Select   apple.com.dashboard.plist   and move it to trash.
    Restart Mac.

  • My printers are not working after mavericks install. What can I do to fix - PLEASE HELP! It is my lifeline - we are a print shop!

    My printers are not working after mavericks install.
    The printer just PAUSE and can't be resumed.
    What can I do to fix - PLEASE HELP!
    It is my lifeline - we are a print shop!

    Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
    Then open System Preferences > Printers & Scanners > Print
    Select your printer on the left then click -  (minus)
    Then click + (plus) to add the printer.

Maybe you are looking for

  • Account texts in Report painter

    I created one report for more than one company code in report painter, the format is Account CoCode1 CoCode2 CoCode3 Total XXXXX XXXXX XXXXX XXXXXX XXX When i tried to run the report the descriptions of the Accounts are not visable instead its displa

  • Extensive (very very very extensive) memory usage of host application with CS extension

    Hi! I tried this only under Photoshop CS5 and InDesign CS5 under Windows 7. When you open and close CS extension panel, the memory taken by Photoshop (InDesign) increases by 6-30MB! In case of the simple HelloPhotoshop (HelloInDesign) panel from the

  • DVD quality lower than expected

    I'm trialling Premiere Elements 11 with a view to purchasing it to allow my Dad to easily edit video from his new camcorder.  The importing and editing work great.  (We are importing .m2ts in full HD from a Panasonic camcorder.) However when we come

  • Reset Cleared Items Massively

    Dear all, I need to reset a lot of cleared documents. Can I do it massively or I have to insert one by one in FBRA? Thanks in advance Alberto

  • How to organize Mail folders?

    Hello, I am having a heck of a time trying to figure out how to do something in Mac Mail (I'm on Mountain Lion with a MacBook Pro with Retina Display). In the past (pre-Mountain Lion), I had individual folders for each of my mail accounts. For exampl