Broadcasting from Portal - Email Zip Functionality Issue

Hi,
After upgrading to BW 7.01 SP7, the functionality to send a zip broadcast email with multiple Excel files is not working properly.  The broadcast setting in question is based off a query, and is using control query functionality to send out multiple files in Excel format.  In the past using the control query has allowed for multiple files to be sent in a zip file, with each file filtered for the selected characteristic in the control query.  When the ''As Zip File' checkbox is selected, the output zip file only contains the first value of the characteristic in an Excel spreadsheet.  If the 'As Zip File' option is not checked, all Excel files based off the control query are included in the email.  Has anyone else encountered this issue?
Thanks.

The problem was that the standard Windows Zip program would not display all the files.  Once a 3rd party zip application was installed the files could be displayed.

Similar Messages

  • Error: Bex broadcaster from Portal

    Whenever  I try to send an email through Bex broadcaster from Portal I get the following error message after executing the broadcast settings.
    DomReaderError 
    Thanks,
    Eveline

    check this sap note 1025835
    reward points if helpful

  • Transport KM rooms as entry point for broadcasting from Portal 7.01 to Portal 7.4 possible?

    Hallo together,
    is it possible to transport entry points (for broadcasting) from one portal to another?
    For our upgrade BW 7.01 to BW 7.4 we want to transport the KM Content (including the rooms).
    Transporting the rooms and room structures is no problem, but the transported rooms are not visible in ENTRY POINTS -> My Room Folders.
    Only rooms that are newly created in the 7.4 Portal are visible in that folder.
    Is there are way to make the transported rooms also visible there?
    Thanks and best regards!
    Christian

    Hi Ramakrishna!
    I know that WP-PI 6.00 will work fine with R/3 4.6C but my doubt is if I can use WP-PI 6.00 (which is
    EP 6.00 plug-in) to connect the R/3 4.6c with an EP 7.00. 
    I didn´t find anything like WP-PI 7.00 in SAP Marketplace. I´ve already read the note you pointed out but it refers to EP 6.00. It also says you can use WP-PI 6.00 por EP 5.0 or Sap Workplace. But can I also use it with EP 7.00?
    Thanks for your help.
    Fernando

  • Opened a bogus email *.zip file from amazon that put two files in my downloads folder OSX 10.8

    Hi
    Can anyone advise my next steps to take, I accidentally opened a bogus email *.zip file attachment from 'Amazon" It unzipped an put two files in my downloads folder one appeared to be a *.exe file. They were deleted immediately along with the email.
    Now I am terrified that there is something lurking on my system...trojan/ keylogger/ virus..
    I am no expert so can anyone give me help!
    My mac is 8 months old running OSX 10.8 with latest updates.
    Thanks Mick

    Thank you both, you have put my mind at rest.
    Normally I am red hot at intercepting bogus emails, not today it would appear!
    I actually was in the process of deleting it and double clicked the file by complete accident, and in a flash it had opened up and put the files in the folder, I spent the rest of the afternoon panicing and reading all forums blogs etc..
    Actually Thomas I found your blog and took some good tips from it, one of them was to switch java off immediately.
    Thanks again
    Mick

  • I am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

    i am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

    With one mailbox server in the production site and one in the DR site, you do not have high availability.  If the main site goes down, the cluster loses quorum and all databases dismount.  You must then force quorum or move the file share
    witness to restore quorum.
    I can't tell you why what you observed happened.  At the time of the problem I would have been looking at the transport queues to see what's queued and to where.
    I recommend you look at the configuration of your send connectors to ensure that none of them are dependent upon the DR site server.
    To send mail outside, you must allow relay.  To do this, I recommend you create a new receive connector that's configured to allow relay and restrict access to the application server to keep anyone else from using it to relay.  There are plenty
    of articles on the Internet that describe how to configure a relay connector.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Issues rendering WDA from portal

    Hi,
    When opening a WDA from portal, we encounter issues where the WDA does not seem to render and hangs.
    This issue occurs sporadically.  When this does occur, if re-activate the "UR" service in SICF, the issue goes away.
    Can anyone shed some light on this issue?
    Thanks and regards,
    Duke

    Hi Duke,
    I don't know that it is even potential a problem - but are you running on a multi server environment? Is it possible that some of the WD components are published and active on one server but not the other? And it might just be a load-balancing issue which is causing the rendering issues- if the app is running on a particular server it doesn't work?
    Not sure if you have explored this possibility - but it might be worth looking into. Certainly it seems strange that reactivating the service would cause the rendering to work...
    Have you also tried clearing all local files in the browser - clear cookies and cached files? Does that resolve the issue?
    - Chris

  • Broadcasting to Enterprise Portal using Bex Broadcaster from Query Designer

    I have already been able to broadcast from Query Designer using BEx Broadcaster to the portal based on a role or a user.
    I select "Export into Enterprise Portal" as the Distribution Type. 
    I then select "Export Document to Personal Portfolio" and then enter a role.
    Then I check "User-specific" because I want it to be user specific.
    This all works fine. 
    Now I get to my question.
    Can I go one step further and broadcast to a folder call... lets say "Sales" inside of their Personal Portfolio?

    Hi Eric,
    I have the same problem. Were you able to resolve it?

  • Ever since we upgraded the operating system on my iMac to OS X, Ilost the function of exporting photos directly into iPhoto from my email. What should I do?

    Ever since we upgraded the operating system on my iMac to OS X, Ilost the function of exporting photos directly into iPhoto from my email. What should I do?

    Let Apple know you want this bug fixed:
    http://www.apple.com/feedback
    Workaround: drag the images from the email to the iPhoto icon on the dock.

  • WebDynpro ABAP application issue from Portal after ECC 6 upgrade to SP14

    Hi,
       We have recently upgraded the Kernel, ABAP and Java stack of ECC 6.0 system to SP14. After the upgrade most of the WebDynpro ABAP applications doesn't load and just flickers when run from Portal as a WebDynpro iView, but they run perfectly fine when accessed directly using URL. These were running fine prior to the upgrade. Can someone suggest what can be going wrong.
       Will reward points for helpful answer.
    Regards
    Mukesh

    Hi Mukesh,
    As Gajendra said, restarting the service in SICF sometimes works for us, but not always.  We have also had to deactivate the entire Webdynpro node, and then reactivate it and all of the services below it.
    Obviously something changed in the SP, given that we now have to do this every time we create a new WDA application.
    Cheers,
    John

  • Email and Synching issues

    How do I get my Hotmail account to synch with my droid.
    If I delete an email on my computer --- it still shows on my phone.  If I delete an email in my phone....it does not update on my computer.  I am hitting the refresh but guessing there is something else missing.
    Or have I purchased a phone where now I have to keep up my email in two locations....I am not going to be happy if that is the case!

    Here is Some instructions that might can Help Ya!  b33
    https://motorola-global-portal.custhelp.com/app/product_page/faqs/p_country_code/US/p/30,6720,8417
    How can I set up Hotmail?
    For Android 4.0 (Ice Cream Sandwich) users, Click here for  instructions.
    To setup Hotmail on your DROID RAZR   once you have already set-up your phone, follow directions below.  If you are addingHotmail account during your phone's initial startup, skip down to Set-up account menu (Instruction #3).
    Open Applications tray, touch My Accounts
    Select Add Account
    You will be at the Set-Up accounts menu with several other social network icons.
    Select Email  icon
    Enter your full Hotmail email address, including "@hotmail.com" domain name in all lower case.
    Enter Hotmail password.
    Leave Automatically configure account checked.
    Tap on Next. phone will connect to your email server and state "Success!" if account was set-up correctly.
    Your account is now set-up.  Please test sending and receiving an email. If you are having issues sending email from Hotmail after set-up, edit the Hotmail account Outgoing server settings, uncheck Use secure server and change the outgoing port from 25 to 587. (Use 587 for sending/outgoing settings with Wi-Fi )
    You should be able to send Hotmail email on port 25 if you are not on Wi-Fi .
    During the connection, you may be asked to complete a manual set-up if your email provider is not recognized, your email address/password is incorrect, or if your email provider has restrictions on mobile email set-up. Please check with your email provider to obtain all the information above. You will need your POP3 or IMAP port and server settings to complete a Manual set-up. If you have this information ready, proceed to next section regarding Manual setup.If prompted for manual setup, touch Manual setup. You can also get into manual setup by unchecking Automatically configure account after you entered your email address and password.
    Touch General Settings, confirm information in all General Settings fields are correct. Make any necessary changes, then select OK to exit this menu.
    Touch Incoming Server.
    Select POP Mail Server
    Enter POP3 server - pop3.live.com
    Activate check on Use Secure connection and Verify Certificate
    Enter Port 995
    Enter / Confirm your Username (complete email address including the @hotmail.com)
    Enter / Confirm your Hotmail Password
    Tap on OK
    Select Outgoing Server
    Enter SMTP server - smtp.live.com
    Do not check Use Secure connection, but check Verify Certificate
    Enter Port - 587 (or 25 when Non-Wi-Fi)
    Enter or just confirm your Username (complete email address including the @hotmail.com) if already displayed
    Enter or just confirm your Hotmail Password if already displayed.
    Tap on OK
    Tap on Other Settings
    Select length of time messages will be kept on phone. (1 week, 2 weeks, 1 month, 2 months, Never Delete Messages)
    Tap on OK
    Tap on OK again to submit Hotmail set-up.
    Your account is now set-up.  Please test sending and receiving an email.   
    If you are having issues sending email from Hotmail after set-up, edit the Hotmail account Outgoing server settings, uncheck Use secure server and change the outgoing port from 25 to 587
    You should be able to send Hotmail email on port 25 if you are not on Wi-Fi. If you are using Wi-Fi, use outgoing port 587.
    ***You can also bookmark the Hotmail Web Brower internet address into your DROID RAZR  for full Hotmail functionality and access to your personal folders at  http://mobile.live.com
    Hotmail, Live, and MSN email accounts now supports CorpSync connection for email accounts.You can get your email, calendar, and contacts pushed automatically to your phone using Exchange ActiveSync (EAS). EAS keeps everything in sync between your phone and Hotmail, so whatever you do on your phone, like delete an email, add an appointment, or update one of your contacts with a new number, will also be reflected on the web, and vice-versa.
    From the home screen, touch Apps > My Accounts > Add Account > Corporate Sync
    Enter your email address and password.
    Enter the following settings:
    Field
    Setting
    Domain
    Leave this blank
    Password
    Enter you password
    User name
    [email protected], [email protected], [email protected]
    Use Secure Connection
    Enable
    Proxy
    Leave Blank
    Server
    m.hotmail.com
    After the account has been validated,  go to Settings > Accounts, look for the new account that was just created; it will have the same name of the account that was used to start this setup process.
    Select the correct account name; then tap on General Settings and change the account name to the correct name for your Exchange account followed by tapping on OK.
    Transfer Hotmail contacts to your phoneTo transfer Hotmail contacts to your phone:Export your Hotmail Contacts
    Sign in to your Hotmail account.
    Click the Contacts tabs.
    Click the Print view.
    Align the cursor with the first letter of the 'Name' column.
    Highlight your contacts by holding down the cursor and dragging it down the list.
    Hold down the 'ctrl + c' keys to copy the list.
    Open Microsoft Excel (or a similar spreadsheet program that supports comma separated values).
    Select cell A1 in Excel (the top square on the left side).
    Hold down the 'ctrl + v' keys to paste.(Note: Do not use 'Paste Special' command.)
    Select File > Save as and type 'CSV (Comma delimited).' (Note: Make a note of where you saved the file.)
    Import Contacts into Google Gmail:
    Log on to Gmail, and then click Contacts at the top of the page
    The Contacts list opens in a new window
    Click Import Contacts
    Click Browse, and then navigate to the .csv file that you created in the "Export Outlook Contacts" section of this article
    Select the file, and then click Import Contacts
    After your contacts are imported, a dialog box appears and displays the total number of contacts imported
    Import to your phone:
    On your phone, from the Home screen, press the Menu key
    Touch Settings
    Touch Accounts
    Select your Google account marked with a "G" icon
    Make sure Sync contacts is checked with green checkmark.
    To immedately sync contacts, press Menu button, tap Sync Now
    Your phone will now sync and transfer your contacts from Gmail to your phone
    Adding a Hotmail Account using Android 4.0 Ice Cream Sandwich
    From the home screen touch > Settings > Accounts & Sync
    Tap Add Account > Email
    Select Windows Live Hotmail to add.If you would like to manually set up your account, touch Other from the email accounts screen.
    Enter the username and password. Your email account will be able to set up automatically.If you are unsuccessful with setting up your account automatically, touch Other from the email accounts, enter your email address and password and touch Manual Set up.
    Select POP3
    Use the following settings:
    Username: Enter / Confirm your Username (complete email address including the @hotmail.com)
    Password: Enter / Confirm your Hotmail Password
    POP3 server: pop3.live.com
    Port: Enter Port 995
    Security type: SSL/TLS
    Authentication Method: Auto
    Touch Next.
    SMTP server: smtp.live.com
    Port: Enter Port - 587 (or 25 when Non-Wi-Fi)
    Security type: STARTTLS
    Authentication Method: Auto
    Touch Next and select the desired Inbox checking frequency

  • Copy text from an email

    I just purchased my first iPad, although I have been an Apple user for years. My question is this...I would like to copy and paste text from an email into a document for saving, or just save a whole email as a .pdf. Is there any way to do this easily? I can't seem to copy and paste from an email on my iPhone and am a bit cofused. I would also like to copy and paste certain passages from books, or web sites. Any suggestions as to the best apps to do this type of thing? Thanks

    Demo wrote:
    James Ward4 wrote:
    iWorks doesn't appear to like iCab on the iPad, but the rest sorta functions.
    I've noticed that as well.
    We are way OT now, (gee we never do that .... ) but the most recent upgrades to iCab Mobile have caused some issues for me. I constantly have to sign in again here the ASC if I go longer than 30 minutes or so without posting. That never used to happen before the latest update to iCab. Could be something I'm doing wrong, but if it is, I haven't figured it out yet.
    Have you explored iCab's settings (of which there are about 5000 ) could be something added there on the last update.

  • ZIP Function - Need Additional Controls To Mitigate Occasional Looping

    I have an extremely large volume of files that need to be individually ZIPed (in blocks of 200-400k files).  While using the function below, sometimes the file does not get added to the ZIP file (initialized/created as part of 'new-object') and the
    function gets stuck in an infinite loop checking for the pre-created ZIP file to grow in size greater than its initialized size of 24 bytes.  All files I'm compressing are less than 200-300k in size and compress immediately.  If the addition to the
    ZIP file takes longer than 50ms, I see an error pop up once and then it moves onto the next file because the second check for file growth becomes true and the file add has successfully completed.
    Personally I just would like to add a counter that checks to see how many times the while statement gets executed so that after 5-10 times, it re-issues the the command to add the file to the zipfile (which appears to resolve the issue when executed manually
    from a seperate powershell window).
    One option that came to mind was to wrap line for adding the file (into the ZIP file) into the while clause and then try to incorporate the counter in there.  I just haven't tried it yet.
    Any additional thoughts on how to accomplish the above modification (to the script below) would be appreciated as my biggest issue is the inability to re-create the problem at-will.  
    function zipit { 
      Param([string]$path) 
      if (-not $path.EndsWith('.zip')) {$path += '.zip'} 
      if (-not (test-path $path)) { 
        set-content $path ("PK" + [char]5 + [char]6 + ("$([char]0)" * 18)) 
      $ZipFile = (new-object -com shell.application).NameSpace($path) 
      $input | foreach {$zipfile.CopyHere($_.fullname); while ((Get-Item $path).length -le 25) {Start-Sleep -m 50}}
    Any help is much appreciated.
    - Rob

    Thanks to all for the input.  
    If I understand JRV's first comment, it's in relation to using the 'CopyHere' method and the fact without auditing for file completion (i.e. if not exists clause), it was cumbersome to use and slowed down by needing to 'sleep' the script between checks for
    existance to prevent excessive CPU utilization by the job along with it being an ASYNC call with no guarentee that your file would be compressed properly without the aforementioned compensating controls.  My personal experience with this method is that
    it seems to work, just not consistent when being called repeatedly (i.e. script compressing 200k files individually).  We ended up with the script getting stuck in a loop once and a while if the file didn't get added to the pre-created ZIP file.  This
    was the leading reason why I continued to explore other methods as this inconsistency meant 'babysitting' our conversion process more.
    I went with what I found (related to .NET Framework 4.5 ZIP functionality) as the implementation was very easy to just re-use and script against (which is effectively what Mike said to use).
    The speed improvement in our case with leveraging the .NET Framework 4.5 ZIP functionality was welcomed as its performance is 4x that of using the less desirable 'CopyHere' method.  Its synchronous nature of .NET 4.5 call  also meant not putting
    the script to sleep for 50ms at a time regardless if it was necesssary or not which I'm sure was also part of the boost in throughput.
    - Rob

  • BEx Broadcasting in portal PDF format thrugh Query designer

    hi,
    i have a problem in sending a query as a mail using broadcaster in pdf format through portal
    The steps to reproduce:
    from Query designer executing a query , it takes me to portal screen, there right click on the report and Broadcast and Export->Broadcast Email..Then a new window opens with BEx broad caster.From that  if i select the Tab Information Broadcasting, there is a Description :No BW object selected, select a template ,Query or a workbook. "  If i open Setting Web Template Tab: and if i  select from HIstory 0BROADCAST_TEMPLATE70 or Stanard Web Template for Broadcasting>Transfer-->then i am getting the new window as Distribution Type: 1.Broadcast Emai 2. Broadcast to portal.. , And Output type1.MHTML 2.HTML 3. Online Link to Current Data.
    But i am not getting  Output Format "PDF",
    guide me what to do to get the PDF option as OutputFormat.
    where i am getting these  options in Query designer itself Query-->Publish. but not in portal when calling portal through query designer by executing a query..
    Thanks in advance

    Hi,
    Think these below links will help you.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/8053f46f-0701-0010-a697-9b33f8b7d2f5
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b03ff263-1e5d-2a10-0d89-a1d4424b101b
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40d5d4dd-5d55-2a10-0cac-8639377bd5b7
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/664db870-0701-0010-ed92-daa4ea9fde8d
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/296edc90-0201-0010-7982-c6dc0b288296
    /people/sap.user72/blog/2005/12/23/summary-of-new-features-for-information-broadcasting-in-sap-netweaver-2004s
    /people/community.user/blog/2006/12/28/exception-broadcasting-in-sap-netweaver-2004s
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0bfcac90-0201-0010-52a3-d5b270b86ef3
    Kind Regards,
    Shanbagavalli.S

  • Debug ECC 4.0 from Portal- need to put External debugger

    Hi,
    Can anyone who was earlier working in ECC 4.0 tell me how to add an external debugger or debug Smartform from Portal.
    External debugger is an easy option when it comes to ECC 6.0 but there is an issue for which i need to debug ECC 4.0 and i can't find Ext. debugger icon in the Function tool bar.
    Things i have tried till now:
    1. Even master weapon <Do ...enddo- sm51> didn't work
    Thanks,
    Rohan

    (sorry for the double answer. Klaus managed to post just before me :=)
    Hello Deep,
    check out help.sap.com, http://help.sap.com/saphelp_nw04/helpdata/en/cd/8a424089ff2571e10000000a155106/frameset.htm
    In addition search the forum for similar questions, there are quite a lot of good answers in the threads.
    regards,
    Jørgen
    Message was edited by: Jørgen Ruud

  • Debugging from Portal

    Hi,
    We access SRM screens via portal in QA system. We have one issue in contract form. Can I debug the smartform function module from Portal? I kept a cursor in function module and tried. But the portal didnt reach the break-point. But in development system, I could debug.
    Can anyone tell me is it possible to debug from Portal content to SRM gui?
    Thanks in advance.
    Regards,
    Nowsath

    debugging for SAP gui of SRM can be done from ITS templetes of diff services.
    not sure from portal.
    BR
    Dinesh

Maybe you are looking for