Broadcom USB Smart Card reader not working

After upgrading my Vista Business SP2 (32-bit) to Windows 7 Ultimate RC (32-bit) my Broadcom USB smart card reader does not work any longer (Dell Latitude E6400 with built in smart card reader).
The newest available driver from dell support was already tested (Broadcom, driver date 09/23/2008, version 1.0.0.1, digitally signed WHQL, released by dell in March 09), but the device can not start (Error code 10) with Windows 7.
With the Microsoft WUDF Driver (Usbccid, driver date 06/21/2006, version 6.1.7100.0) the device starts but whenever I insert my smart card an additional device is detected (other device - smart card) but no driver found - Error message is: The drivers for this device are not installed. (Code 28).
What else can I try to get this reader working again (with vista sp2 the smart card reader was working fine with the broadcom driver)?

I have also an USB card reader that works fine on XP PCs but Win7 does not recognise it, can msft make a sd reader driver that works pls.
Hi
Sorry, but the way the industry works is that Microsoft develops Windows and Hardware manufacturers develop drivers for their products. Microsoft does maintain a complete division (MSDN) that is dedicated to assisting hardware and software manufacturers in developing their products for compatibility with Windows.
All of the drivers that are contained on the Windows installation disk and on Windows Update are placed there by the manufacturers of the devices. This is a service that Microsoft provides to help these manufacturers to distribute their drivers.
What you can do.
1. Check with the computer manufacturer for updated drivers for that device. This is your best source, since the computer manufacturer builds, tests, and sometimes develops their own, custom drivers to work with the hardware on their PCs.
2. Try to determine the name and manufacturer of the device using Device Manager and MSInfo32. Once this information is found, try to find that manufacturers website and look for the latest compatible drivers.
3. Check to see if there are any users forums on the PC manufacturers or device manufacturers websites. Ask there about any known issues with this particular hardware device or if the device is no longer supported.
4. If the drivers are found but are only available for previous versions of Windows, install the drivers using the Windows Compatibility Mode. HOW TO: Install a Hardware Device Driver using Compatibility Mode
Right now, we are in a unique situation since we are using an operating system that is still in the pre-release phase. Many hardware/software manufacturers will be ofrficially supporting their products for Windows 7 until after the General Availability date of October 22, 2009.
Hope this helps.
Thank You for using Windows 7
Ronnie Vernon MVP

Similar Messages

In my macbook pro hdmi, usb & SD card reader not working

In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,

Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

USB memory card reader not working since latest security update

Hi, I have an iApp CR-e500 multi-format memory card reader; worked great prior to the latest security update. Now every time I plug it in I get the following errors in the console:
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.818 AppleUSBEHCI[0x1b4d800]::Found a transaction past the completion deadline on bus 91, timing out!
Oct 19 03:37:00 dachshund kernel[0]: USBF: 1496.826 AppleUSBEHCI[0x1b4d800]::DoIOTransfer - error 0xe000404f queueing request
The reader works fine on my office Windows laptop and my USB pendrive still works on my Mac, so the USB ports appear to be functional; they just don't like this thing anymore.
Was there a USB driver change? If so is there anything I can do to sort this? I suppose I could just buy a new card reader if someone can confirm one that works with the latest security update of 10.4.11, that would be great.
Alternatively if Apple could please loosen up whatever they tightened in their USB drivers that would be nice as well...

Disregard. Looks like it's the memory card I'm trying to mount; not working on the Windows machine either.
Sorry!

HP EliteBook 8560w internal smart card reader not working

Uh! No!
On the Elitebook 8560w, the SDCard connection points do not face up, they in fact, face down. Facing up the card does not go in at all.
Also...
The SD MMC slot still does not work. I have tried every driver. I have tried putting a card in and running Windows Update. Nothing is working.
What's up HP are you ever going to respond and fix this?

What operating system is it? Are you sure you put the card in the correct way? [not trying to be mean here]

ACR122U smart card reader not recognized after reboot...

I am new to POS Windows and have been working with wondows for ever. I was using ACR 122u contactless usb smart card reader with windows XP and communicating with it using java with no problems. Then our I changed the OS to windows Pos ready 2009 and we found out that USB card reader has to be unplugged and plugged back in after rebooting the computer. other than the OS everything else is identicle (driver, reader, java program, ect..). Can any one tell me what could cause this problem and what I can do to solve this.
I have cheked the device manager and under USB controllers it says that it is unrecognized deivice..I tried changing the reader, changing the port and(actually the reader is pluged in to a linksys external usb hub, but changing this to a internal port did not make any difference) tried chagning some settings in control panel.
1. I checked the power option of the root usb hub.
2. Changed the driver.cab to a normal driver.cab obtained from the normal xp version. Uninstall the driver and reinstall it.
So far this hasnt been working.
I hope someone could help me with this.
~Tharanga

After extensive tests with Win 7 Embedded and ACR122U, I can confirm the same problem. It seems that reader firmware hangs and the only way to recover is to unplug and plug again the reader. We shall repeat the tests with readers from other manufacturers.
For the tests, we use a Win7 Embedded Standard PC with an ACR122U connected. We installed and configured the ACS Monitor program to start automatically with windows. We made a small utility to restart the PC every minute and we placed it on the Startup directory.
Within the first 5-10 reboots, the reader fails and the ACS monitor program shows " No reader connected" and no reaction from the reader. If we shall unplug and plug the reader again to the USB port everything works fine again.
Kostas P.

Dc7800 "smart card reader not present" during POST

Hi,
I've got a dc7800 Small Form Factor system. It was working fine but after a reboot it won't start up normally anymore. The black POST screen appears, RAM testing starts to count up and then I see and error about "system options not set". After less than a second, a blue window in the middle of the screen displays the message "smart card authentication" and below that, "smart card reader not present".
From a bit of reading it seems like a BIOS problem but I can't figure out how to really reset the CMOS and get things working again. I've tried removing the CMOS jumper and booting the system, removing the power cord and CMOS battery for 10 minutes, and have tried putting a BIOS .bin file on a FAT32 USB key in an attempt to use the BIOS recovery option, none of which has worked.
Is there a way to do one of the following:
- force the CMOS defaults to reset and remove the configuration that requires the smart card authentication?
- force a BIOS recovery, with a key combination or by using a different jumper or jumpers on the motherboard?
I see various other jumpers and pads on the motherboard like "ROM RCVRY" and the E15 Boot Block Recovery Header but scant information about how these might be used to solve the problem.
It seems to me that the hardware is fine as it powers up and displays the POST screen. It's like a BIOS setting has been reset to require a smart card, even though there isn't one, nor even a smart card reader, in the system.
Any advice would be greatly appreciated.
TIA,
JS

Hi:
After doing some research on the message, I came across this post.
I guess your PC has a smart card optional system.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7800-smart-card-athentication/m-p/10691...
Now, if you can get into the BIOS menus, if you look at the top of page 8, you will see what you need to do in order to enable/disable the smart card reader message.
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01162201/c01162201.pdf
Whatever the problem is, it is a security setting issue, and clearing the CMOS or updating the BIOS will not have any effect on that setting.
Unfortunately, I have no experience with the security settings or protect tools software on HP business PC's.
I have a dc7800 (and only use HP business desktops and notebooks), so I am very familiar with all the other aspects of the PC but that one.
You may want to post your issue on the HP business support forum, business PC section. Hopefully someone there has experience with turning this feature on or off.
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.Uk2rcJAo69I
You may also want to log in and reply to that post, but don't get your hopes up that it will be answered.
RichS hasn't replied to a post in 3 years. Although someone else may.
Good luck, and please post back if you find the solution to the problem.

USB Smart Card reader

I want to interface with a USB smart card reader to make a cash card system. I'm not going to be writing any code that goes on the smart card itself, just code that runs on a PC. Is the Card SDK what I'm looking for or am I way off base? If it isn't, where should I be looking?

Hi,
sureshot324 wrote:
I want to interface with a USB smart card reader to make a cash card system. I'm not going to be writing any code that goes on the smart card itself, just code that runs on a PC. Is the Card SDK what I'm looking for or am I way off base? If it isn't, where should I be looking?All you need is Java 6. You can then use the javax.smartcardio package to communicate with a PC/SC smart card device. You should able to find examples online. You only need the JCDK if you plan to develop on card code.
Cheers,
Shane

Pavilion dv6 sd card reader not working

I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
rv9a
This question was solved.
View Solution.

Good morning rv9a.
Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue. Here is the link for Windows 7 and here is the link for Windows 8.
Another possibility is the the Plug and Play service is deactivated. Try the following to check.
Press the Windows+R keyboard shortcut.
Type "services.msc" into the box and click okay.
Scroll down until you find "Plug and Play" in the list.
Ensure that it is started. If it is not right-click on the service and select Start or Enable.
I'll keep an eye out for your response; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Z61t SD card reader not working?

z61t SD card reader not working?
Tried the Vista driver and still not working.
Same for camera.
I am running Windows 7 64bit and using TVSU v4.0 as well as manual attempts to update.

I am running windows 7 home 32 bit and can not get the sd card reader driver to load either. Any help?

Card reader not working out the box scr 3500?

cac card reader not working out of box scr3500 help

Welcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel

Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?

Hi to All,
Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?

Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas?

USB Card reader not working

My USB multi card reader (Vivanco) , which works fine with Debian and Ubuntu, is not working with Arch.
dmesg:
[14731.984087] usb 1-1.1: USB disconnect, device number 3
[14734.983998] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
lsusb:
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 004: ID 08bb:2902 Texas Instruments PCM2902 Audio Codec
Bus 002 Device 005: ID 046d:c326 Logitech, Inc.
Bus 002 Device 006: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
lspci:
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation B75 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 650 Ti Boost] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 0e0b (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)
There is no such device in /dev:
[vibee@archpc dev]$ ls
autofs core full hugepages mapper network_throughput ptmx sda2 stderr tty11 tty18 tty24 tty30 tty37 tty43 tty5 tty56 tty62 ttyS2 vboxusb vcs6 vcsa6
block cpu fuse initctl mcelog null pts sda4 stdin tty12 tty19 tty25 tty31 tty38 tty44 tty50 tty57 tty63 ttyS3 vcs vcsa vga_arbiter
bsg cpu_dma_latency hidraw0 input mei nvidia0 random sdb stdout tty13 tty2 tty26 tty32 tty39 tty45 tty51 tty58 tty7 uinput vcs1 vcsa1 vhost-net
btrfs-control disk hidraw1 kmsg mem nvidiactl rtc sdb1 tty tty14 tty20 tty27 tty33 tty4 tty46 tty52 tty59 tty8 urandom vcs2 vcsa2 watchdog
bus dri hidraw2 kvm mqueue port rtc0 shm tty0 tty15 tty21 tty28 tty34 tty40 tty47 tty53 tty6 tty9 usb vcs3 vcsa3 watchdog0
char fb0 hidraw3 log net ppp sda snapshot tty1 tty16 tty22 tty29 tty35 tty41 tty48 tty54 tty60 ttyS0 vboxdrv vcs4 vcsa4 watchdog1
console fd hpet loop-control network_latency psaux sda1 snd tty10 tty17 tty23 tty3 tty36 tty42 tty49 tty55 tty61 ttyS1 vboxnetctl vcs5 vcsa5 zero
Usually, the sd card should appear as /dev/mmcX, right? How can I get started?

Accoring to this wiki, it could: https://wiki.archlinux.org/index.php/HCL/Card_Readers
Anyway, /dev/sdb is a SATA disk.
Last edited by vibee (2013-07-05 13:22:04)

T430s SDHC card reader not working

Hi, I recently bought a T430s and when I tried to insert a SD card it did not show up in my computer. I've tried 3 different SD cards the sizes are16 gb, 32 gb and 2 gb and neither of them shows up, to make sure the problem is not in the SD card I tried using the SD cards in 2 cameras and 2 other laptops. In all those devices the cards works.
I have tried installing these drivers from this thread https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/New-T430s-4-in-1-express-card-SD-reader-mi... but it did not work.
I also tried following the instructions in this thread http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T430s-card-reader-cannot-read-16-GB-SDHC-ca... but that did not help either.
According to the device manager the Ricoh PCIe SDXC/MMC Host Controller is working correctly. The Ricoh SD Disk Device is also working correctly.
Whenever I insert the SD card the Sound for a new device plays and when i remove the SD card the removal sound plays. How can I fix this? I'm going away for 7 weeks with my laptop so I need to fix it ASAP and I dont have time to send the laptop to Lenovo.
EDIT:
I uninstalled Ricoh Media driver and now 1 of the cards show up but Windows complains about that it needs to be formatted, but the size is 0 so that doesn't work either. Tried installing the driver again and now they show up in the device manager again and proudly says that they are working but the SD card still doesn't show up so I can read the files on it.
EDIT 2:
If I go into the device manager and forcibly update the the Ricoh SD Disk Device then it says:
Disc: Disc 1
Type: Removable
Status: Online
Partitiontype: MBR (Master Boot Record)
Capacity: 15807 MB
Non-allocated space: 0 MB
Allocated space: 0 MB
For the 32 gb SD card everything is the same but instead it says "Capacity: 30828 MB".
EDIT 3:
When the SD card is inserted a storage device pops up in the device manager. The name of the device is just "Unknown device" and the status is that it can't find any installed drivers for the device.

I'm experiencing a similar situation with my 1-year old T430s. The built-in card reader was working fine until recently when it stopped working.
Now the built-in SD card reader doesn't recognize SD cards that are recognized in external USB adapters.
Device Manager shows Ricoh PCIe SDXC/MMC Controller when an SD card is inserted into the card reader but neither Windows Computer Management/Disk Management nor Windows Explorer show the drive. Device Manager indicates that the driver is up-to-date (v6.10.10.32 25May11.)
When I put the same SD cards into an external USB adapter they're recognized by Windows, assigned a drive letter and visible to Windows Explorer as well as other applications.
Do I have a defective card reader?
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Smart Card Reader not showing correct certificates?

Running 10.5.6 with an SCR331, G4 desktop. I have been using entourage, smart card reader, and CAC successfully for quite some time.
My CAC was recently updated with new certificates. When I insert my card reader with CAC into my machine, the keychain (and Entourage) show the old certificates which aren't even on my CAC anymore. Obviously I can't get Entourage (or other websites) to work without being able to access the new certs.
I verified the CAC & reader were good by looking at it using a windows XP machine. The three new certificates were there.
I also used another Mac (lap top) to verify the certs. I inserted my reader into the lap top, and the keychain on that machine displayed the correct certificates.
I have tried several methods of rebuilding/replacing my keychain without success. Is there another token that needs to be cleared? Any help in letting access the new certificates would be very much appreciated.
Thanks,
Bob

If you did what a lot of people did you put your certs locally and you do not need to do this. Delete them from your keychain and just in cert your CAC. Then create a "IDPref" for the DoD site you are trying to access and you should be good to go. If you need help, I have written a good "How-to" on my webblog. Just do a search for "safari and CAC".
Jonathan
<Edited by Host>

Card reader not working on Mega 865 Pro

Samsung SpinPoint 250GB SATA II Hard Drive SP2004C
1GB Kingston Hyperx 512 DDR400 PC3200 CL3
Intel Pentium 4 630 3 Ghz Socket 775 800Mhz 2mb
LG GSA4163B 16X DVD Dual Layer R/RW/RAM
Windows XP SP2
Now The 7 in 1 card reader does not work! I am used to installing new hardware. There is no entry in the Device Manager for a card reader. I have tried an SD card and a CF card. Tried restarting the PC, tried running Add/Search new hardware wizard. Nothing gets detected. This PC is more trouble than it is worth! The firewire ports and usb ports on the same front panel all seem to work? I've run out of things to try so if anyone has an idea I'd be grateful..
Tech support from MSI - rubbish.

I dont think it is then end of the world if the card reader doesnt work, anyway
what OS are you using? Windows XP should install a driver automatically.
Is the flash drive cable connect to to the motherboard? check the manual to find the cable and enusre it is connected.

Broadcom USB Smart Card reader not working

Similar Messages

Maybe you are looking for