Broken disk permissions

broken disk permissions what causes them. thanks

If you refer to the disk permission from the disk utilities app, you do not have to worry about them. most user do never repair them at all.
regards jl

Similar Messages

Repair disk permissions does not work

Repair disk permissions does not work. Disk Uitliy fines many incorrect permissions (ACL found, but not expected) and says that it would repair it. However, when checked again, it finds the same permission errors.
I have tried Disk Utility as well as the command line "sudo diskutil repairPermissions /" (which probably does exactly the same as Disk Utility).
Any hints?
C.

Are you trying to Repair Permissions because you have file access problems in the System files, or just because you think you need to do it?
If the former, please explain what you are seeing. If the latter, stop wasting your time.
The things it doesn't repair are not repaired because there is nothing broken. The orginal Receipts files have the old settings, and subsequent updates have changed the permissions on those things to what they should be, now. It will report the differences it finds every time you run Repair Permissions because they will always be different and they should be the way they are.

Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility bu

Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.

Hi Maarton,
Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
-Ankit

New macbook pro, safari won't open and repair disk permissions did nothing to help

Safari starts, blue bar moves about an inch in search bar, then stops. Then nothing. Tried repairing disk permissions to no avail. Safari still doesn't open. Whatever os x that is installed on new macbook pro's, since just bought on Sunday 10-14-12, is the operating software. The apple store there is no user manual. Strange. So here we are on another, older macbook pro, able to go on internet and see what answers or diagnoses others have tried and trued.

3 days old?, just pack the machine up and tell them you want another one, that this one is a lemon.
They will likely take your word for it and just give you another rather than you demand your money back instead.
If you wait too long then they say you should have brought it back sooner, now have to wait until it's fixed, only to give you more problems later.

Updating to iTunes 11.1 gave me a lot of disk permissions errors

I ran a Verify Disk Permissions before the installation of iTunes 11.1 and everything was clean, then I did one after installing iTunes 11.1 and I got a ton of errors. See below:
After running repair permissions several times, running from the boot drive or from an external booted, after uninstalling and doing a fresh install, nothing changed.
I also tried to repair the ACLs by booting from the Recovery partition and using resetpassword command.
I know it's not very important but I like to keep my system in perfect shape.
Come on Apple, after one single update, this is NOT SERIOUS!

Same here. But without knowing for sure why Apple did let this messages appear, in short, you should consider them as not important...at least for now...and here is why for the ones interested in some details about the error:
Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AACEncoderConfig.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
What this means in Unix language is that permissions check is expecting that "AACEncoderConfig.nib" to be a directory and it's not. You can tell because of "drwxr-xr-x" the d letter at the beginning of the string means "directory" and when compared with the actual value "-rwxr-xr-x", the absence of d means that it refers to a file.
Now you might ask why is the system expecting a directory?
Here is a link that describes why: http://support.apple.com/kb/HT1452?viewlocale=en_US&locale=en_US
OK...but what is this kind of files .nib?
This files are normally GUI files...and in the past...not so far away...it was based on a directory structure...but iTunes 11.1 is the first released Apple app that is using their new nib file spec. And this is somehow apparent...I mean the error messages we are all seeing when we run the permissions check suggest it.
Then I need to add, as a guess, it looks like this is due to the coming OSX upgrade...I saw another software giving the same permissions errors and even if I cannot say which app, it's one that is heavily tested right now and it will appear on OSX Lion/Mountain Lion and the new Mavericks.
Hope this helps!

Constantly having to repair disk permissions after hanging system

From the time I purchased this I've had ongoing issues with the java, flash, OS updates causing the computer to hang forever. Sometimes I end up having to press the off button because Command Q and Command/Option/Escape won't allow a force quit even after a 20 minute wait. I don't know enough about what's going on behind the boot up to know what's wrong. Here is a copy of my console log and this is exactly what they look like each time after I have gone in and done a disk verify, (says it's okay) and then repair disk permissions. I've had to boot to safe mode 3 times today and repair permissions due to this issue. There is nothing plugged into the computer except the power cord. The OS is up to date per Software Update and the only 3rd party software installed is SKYPE ...
1/25/11 5:45:58 PM SoftwareUpdateCheck[520] Checking for updates
1/25/11 5:45:58 PM storeagent[524] port created
1/25/11 5:46:27 PM com.apple.launchd[1] (com.apple.suhelperd[522]) Exited with exit code: 2
1/25/11 5:46:27 PM com.apple.launchd.peruser.501[88] ([0x0-0x3d03d].SoftwareUpdateCheck[520]) Exited with exit code: 102
1/25/11 8:21:42 PM [0x0-0x52052].com.skype.skype[613] Main starting with pid 613 parent pid 88
1/25/11 8:21:43 PM Skype[613] SkypeApplication::init called
1/25/11 10:56:56 PM com.apple.launchd[1] * launchd[1] has started up. *
1/25/11 11:09:29 PM com.apple.fontd[70] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/25/11 11:09:31 PM com.apple.WindowServer[72] Tue Jan 25 23:09:31 Troy-Lindstroms-MacBook.local WindowServer[72] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/25/11 11:09:32 PM com.apple.fontd[70] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/25/11 11:09:40 PM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
1/25/11 11:09:40 PM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/25/11 11:09:40 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/25/11 11:09:42 PM fontd[100] Database content version mismatch (stored(15) != expected(14))
1/25/11 11:09:47 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[108]) Exited with exit code: 1
1/25/11 11:10:09 PM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/25/11 11:10:12 PM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/25/11 11:10:13 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[110]) Exited: Killed
1/25/11 11:10:14 PM com.apple.loginwindow[22] shutdown: / is busy updating; waiting for lock
1/25/11 11:10:33 PM com.apple.launchd[1] * launchd[1] has started up. *
1/25/11 11:11:24 PM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
1/25/11 11:11:24 PM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/25/11 11:11:24 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/25/11 11:11:28 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
1/25/11 11:11:28 PM fontd[101] Failed to open read-only database, regenerating DB
1/25/11 11:11:34 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/25/11 11:11:40 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/25/11 11:11:48 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/25/11 11:11:49 PM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 90
1/25/11 11:11:51 PM Skype[116] SkypeApplication::init called
1/25/11 11:38:12 PM com.apple.WindowServer[69] Tue Jan 25 23:38:12 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/26/11 11:36:13 AM [0x0-0x6d06d].com.skype.skype[666] Main starting with pid 666 parent pid 90
1/26/11 11:36:14 AM Skype[666] SkypeApplication::init called
1/26/11 12:25:04 PM com.apple.launchd.peruser.501[90] ([0x0-0x6d06d].com.skype.skype[666]) Exited: Terminated
1/26/11 5:45:58 PM SoftwareUpdateCheck[867] Checking for updates
1/26/11 5:45:58 PM storeagent[870] port created
1/26/11 5:47:17 PM com.apple.launchd[1] (com.apple.suhelperd[869]) Exited with exit code: 2
1/26/11 5:47:17 PM com.apple.launchd.peruser.501[90] ([0x0-0x92092].SoftwareUpdateCheck[867]) Exited with exit code: 102
1/26/11 8:32:58 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:32:58 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
1/26/11 8:32:58 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:32:58 Troy-Lindstroms-MacBook.local Safari[143] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/26/11 8:33:10 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:33:10 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
1/26/11 8:33:24 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:33:24 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
1/26/11 10:48:32 PM com.apple.launchd.peruser.501[90] ([0x0-0x11011].com.apple.Safari[143]) Exited: Terminated
1/26/11 10:49:37 PM com.apple.launchd[1] (com.apple.suhelperd[1047]) Exited with exit code: 2
1/26/11 10:49:44 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/27/11 11:39:52 PM com.apple.launchd[1] * launchd[1] has started up. *
1/27/11 11:40:14 PM com.apple.launchd.peruser.501[84] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/27/11 11:40:15 PM com.apple.UserEventAgent-LoginWindow[77] ALF error: cannot find useragent 1102
1/27/11 11:40:15 PM com.apple.UserEventAgent-LoginWindow[77] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/27/11 11:40:15 PM SoftwareUpdateCheck[98] Checking for updates
1/27/11 11:40:15 PM com.apple.launchd.peruser.501[84] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/27/11 11:40:17 PM storeagent[119] port created
1/27/11 11:40:21 PM com.apple.WindowServer[65] Thu Jan 27 23:40:21 Troy-Lindstroms-MacBook.local WindowServer[65] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/27/11 11:40:27 PM [0x0-0xa00a].com.skype.skype[116] Main starting with pid 116 parent pid 84
1/27/11 11:40:29 PM Skype[116] SkypeApplication::init called
1/27/11 11:41:02 PM SoftwareUpdateCheck[98] Downloading "iTunes"
1/27/11 11:42:35 PM SoftwareUpdateCheck[98] Auto-download of "iTunes" SUCCESSFUL.
1/27/11 11:42:35 PM SoftwareUpdateCheck[98] Launching app
1/27/11 11:43:20 PM com.apple.launchd.peruser.501[84] ([0x0-0x6006].SoftwareUpdateCheck[98]) Exited with exit code: 102
1/28/11 9:51:59 AM com.apple.RemoteUI[589] CoreAnimation: rendering error 501
1/28/11 9:52:15 AM com.apple.RemoteUI[589] HTTP2 Streaming Reads ON
1/28/11 11:31:15 AM com.apple.launchd.peruser.501[84] ([0x0-0x10010].com.apple.Safari[134]) Exited: Terminated
1/28/11 11:42:21 AM com.apple.launchd[1] (com.apple.suhelperd[104]) Exited with exit code: 2
1/28/11 3:49:50 PM com.apple.launchd.peruser.501[84] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/28/11 3:49:50 PM com.apple.launchd.peruser.501[84] ([0x0-0x80080].com.apple.iTunesHelper[764]) Exited: Killed
1/28/11 3:50:10 PM com.apple.launchd.peruser.501[84] (com.apple.Dock.agent[88]) Exit timeout elapsed (20 seconds). Killing
1/28/11 3:53:36 PM com.apple.launchd[1] * launchd[1] has started up. *
1/28/11 3:55:16 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/28/11 3:55:16 PM com.apple.UserEventAgent-LoginWindow[82] ALF error: cannot find useragent 1102
1/28/11 3:55:16 PM com.apple.UserEventAgent-LoginWindow[82] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/28/11 3:55:25 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/28/11 3:55:27 PM com.apple.WindowServer[72] Fri Jan 28 15:55:27 Troy-Lindstroms-MacBook.local WindowServer[72] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/28/11 3:55:40 PM [0x0-0x8008].com.skype.skype[115] Main starting with pid 115 parent pid 90
1/28/11 3:55:41 PM Skype[115] SkypeApplication::init called
1/28/11 11:40:16 PM SoftwareUpdateCheck[419] Checking for updates
1/28/11 11:40:16 PM storeagent[422] port created
1/28/11 11:40:59 PM com.apple.launchd[1] (com.apple.suhelperd[421]) Exited with exit code: 2
1/28/11 11:40:59 PM com.apple.launchd.peruser.501[90] ([0x0-0x56056].SoftwareUpdateCheck[419]) Exited with exit code: 102
1/29/11 3:02:24 AM quicklookd[551] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/images-30.jpeg>' (Start date: 2011-01-29 03:02:04 -0800)
1/29/11 3:05:11 AM quicklookd[555] [QL] 'Creating thumbnail - cancelled' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/About Downloads.pdf>' (Start date: 2011-01-29 03:03:35 -0800)
1/29/11 3:05:52 AM quicklookd[560] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/About Downloads.pdf>' (Start date: 2011-01-29 03:05:32 -0800)
1/29/11 3:06:44 AM quicklookd[563] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/images-3.jpeg>' (Start date: 2011-01-29 03:06:22 -0800)
1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] ([0x0-0x86086].com.apple.Preview[708]) Exited: Killed
1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] ([0x0-0x8a08a].com.apple.systemevents[721]) Exited: Killed
1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/29/11 6:37:13 AM com.apple.launchd[1] * launchd[1] has started up. *
1/29/11 6:37:42 AM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
1/29/11 6:37:42 AM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/29/11 6:37:42 AM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/29/11 6:37:50 AM com.apple.WindowServer[54] Sat Jan 29 06:37:50 Troy-Lindstroms-MacBook.local WindowServer[54] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/29/11 6:37:52 AM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
1/29/11 6:38:03 AM [0x0-0x8008].com.skype.skype[113] Main starting with pid 113 parent pid 89
1/29/11 6:38:05 AM Skype[113] SkypeApplication::init called
1/29/11 12:14:57 PM [0x0-0x36036].com.apple.CharacterPaletteIM[330] objc[330]: Class ThinDividerSplitView is implemented in both /System/Library/Input Methods/CharacterPalette.app/Contents/MacOS/CharacterPalette and /System/Library/Input Methods/CharacterPalette.app/Contents/PlugIns/RomanView.CharPalettePlugin/Conte nts/MacOS/RomanView. One of the two will be used. Which one is undefined.
1/29/11 12:43:40 PM [0x0-0x39039].com.apple.CharacterPaletteIM[346] objc[346]: Class ThinDividerSplitView is implemented in both /System/Library/Input Methods/CharacterPalette.app/Contents/MacOS/CharacterPalette and /System/Library/Input Methods/CharacterPalette.app/Contents/PlugIns/RomanView.CharPalettePlugin/Conte nts/MacOS/RomanView. One of the two will be used. Which one is undefined.
1/29/11 6:52:46 PM com.apple.launchd.peruser.501[89] ([0x0-0xf00f].com.apple.Safari[131]) Exited: Terminated
1/29/11 6:52:59 PM com.apple.launchd.peruser.501[89] ([0x0-0x1e01e].com.apple.AddressBook[206]) Exited: Terminated
1/29/11 6:52:59 PM loginwindow[29] * -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)
1/29/11 6:52:59 PM com.apple.loginwindow[29] 2011-01-29 18:52:59.446 loginwindow[29:107] * -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)
1/29/11 6:53:14 PM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
1/30/11 9:17:52 AM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 9:19:51 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 9:19:51 AM com.apple.WindowServer[68] Sun Jan 30 09:19:51 Troy-Lindstroms-MacBook.local WindowServer[68] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/11 9:19:54 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 9:20:00 AM com.apple.UserEventAgent-LoginWindow[78] ALF error: cannot find useragent 1102
1/30/11 9:20:00 AM com.apple.UserEventAgent-LoginWindow[78] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 9:20:00 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 9:20:02 AM fontd[98] Database content version mismatch (stored(15) != expected(14))
1/30/11 9:20:04 AM SoftwareUpdateCheck[94] Checking for updates
1/30/11 9:20:05 AM storeagent[102] port created
1/30/11 9:20:08 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
1/30/11 9:20:38 AM com.apple.launchd.peruser.501[86] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
1/30/11 9:20:39 AM com.apple.loginwindow[22] shutdown: / is busy updating; waiting for lock
1/30/11 9:20:44 AM com.apple.launchd[1] (com.apple.suhelperd[101]) Exited with exit code: 2
1/30/11 9:20:45 AM com.apple.launchd.peruser.501[86] ([0x0-0x6006].SoftwareUpdateCheck[94]) Exited with exit code: 102
1/30/11 9:20:49 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/30/11 9:20:55 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/30/11 9:21:16 AM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 9:22:04 AM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
1/30/11 9:22:04 AM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 9:22:04 AM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 9:22:07 AM fontd[101] Database content version mismatch (stored(15) != expected(14))
1/30/11 9:22:07 AM fontd[101] Failed to open read-only database, regenerating DB
1/30/11 9:22:11 AM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 9:22:13 AM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/30/11 9:22:19 AM com.apple.WindowServer[69] Sun Jan 30 09:22:19 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/11 9:22:26 AM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 9:22:26 AM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 89
1/30/11 9:22:28 AM Skype[116] SkypeApplication::init called
1/30/11 10:33:53 AM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/30/11 10:34:02 AM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 10:34:26 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 10:34:26 AM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
1/30/11 10:34:26 AM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 10:34:28 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[107]) Exited with exit code: 1
1/30/11 10:34:32 AM [0x0-0x8008].com.skype.skype[112] Main starting with pid 112 parent pid 86
1/30/11 10:34:36 AM Skype[112] SkypeApplication::init called
1/30/11 3:37:45 PM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 3:50:19 PM com.apple.fontd[68] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 3:50:19 PM com.apple.WindowServer[69] Sun Jan 30 15:50:19 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/11 3:50:21 PM com.apple.fontd[68] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 3:50:52 PM com.apple.coreservicesd[45] ThrottleProcessIO: throttling disk i/o
1/30/11 3:53:14 PM com.apple.UserEventAgent-LoginWindow[80] ALF error: cannot find useragent 1102
1/30/11 3:53:14 PM com.apple.UserEventAgent-LoginWindow[80] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 3:53:14 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 3:53:15 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
1/30/11 3:53:18 PM com.apple.coreservicesd[45] ThrottleProcessIO: throttling disk i/o
1/30/11 3:53:20 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
1/30/11 4:00:53 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
1/30/11 4:12:07 PM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 4:12:56 PM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
1/30/11 4:12:56 PM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 4:12:56 PM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 4:12:59 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
1/30/11 4:12:59 PM fontd[101] Failed to open read-only database, regenerating DB
1/30/11 4:13:06 PM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/30/11 4:13:15 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 4:13:21 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 4:13:21 PM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 89
1/30/11 4:13:23 PM Skype[116] SkypeApplication::init called
1/30/11 5:12:33 PM com.apple.WindowServer[69] Sun Jan 30 17:12:33 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/11 5:12:34 PM com.apple.RemoteUI[169] CoreAnimation: rendering error 501
1/30/11 5:12:46 PM com.apple.launchd.peruser.501[89] ([0x0-0x9009].com.skype.skype[116]) Exited: Terminated
1/30/11 5:12:49 PM com.apple.RemoteUI[169] HTTP2 Streaming Reads ON
1/30/11 5:13:12 PM System Preferences[175] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
1/31/11 12:17:59 AM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 5 seconds
1/31/11 12:54:05 AM com.apple.launchd.peruser.501[89] ([0x0-0x18018].com.apple.Safari[180]) Exited: Terminated
1/31/11 1:31:00 AM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/31/11 1:31:24 AM com.apple.launchd[1] * launchd[1] has started up. *
1/31/11 1:33:28 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/31/11 1:33:29 AM com.apple.WindowServer[67] Mon Jan 31 01:33:29 Troy-Lindstroms-MacBook.local WindowServer[67] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/31/11 1:33:31 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/31/11 1:33:48 AM com.apple.UserEventAgent-LoginWindow[76] ALF error: cannot find useragent 1102
1/31/11 1:33:48 AM com.apple.UserEventAgent-LoginWindow[76] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/31/11 1:33:48 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/31/11 1:33:50 AM fontd[96] Database content version mismatch (stored(15) != expected(14))
1/31/11 1:33:54 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[105]) Exited with exit code: 1
1/31/11 1:34:13 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/31/11 1:34:13 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/31/11 1:44:00 AM com.apple.launchd.peruser.501[86] (com.apple.AirPortBaseStationAgent[107]) Exited: Killed
1/31/11 1:44:10 AM com.apple.launchd[1] * launchd[1] has started up. *
1/31/11 1:44:43 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/31/11 1:44:43 AM fontd[95] Database content version mismatch (stored(15) != expected(14))
1/31/11 1:44:43 AM fontd[95] Failed to open read-only database, regenerating DB
1/31/11 1:44:44 AM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
1/31/11 1:44:44 AM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/31/11 1:44:45 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[108]) Exited with exit code: 1
1/31/11 1:44:45 AM com.apple.fontd[95] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/31/11 1:44:57 AM com.apple.fontd[95] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/31/11 1:44:58 AM [0x0-0x8008].com.skype.skype[112] Main starting with pid 112 parent pid 86
1/31/11 1:45:00 AM Skype[112] SkypeApplication::init called
1/31/11 2:00:28 AM com.apple.launchd[1] (com.apple.suhelperd[141]) Exited with exit code: 2
Can anyone see the issue or tell me what I need to do to fix this thing???

Which MacBook model? Did it come with OSX 10.6 or did you upgrade it?

Can I get rid of my faulty disk permissions by upgrading to Lion?

I just replaced my hard drive for my MacBook. I took it to an Apple retail store, and they installed Snow Leopard. I restored the system to what I had on the previous hard drive (which had faulty disk permissions). I was told that the permissions were in error because of the failing hard drive. I even asked if I restored from my old hard drive if those faulty permissions would pop up. They said no, and that I could even uncheck the settings box on the transfer when I first started the computer. So I ran disk utility, and wa-la. Faulty disk permissions. If I upgrade to Lion, will it overwrite the system? Will my faulty disk permissions leave me in peace?

Check apple's list of permission errors you can safely ingore at http://support.apple.com/kb/ts1448
I had a few permission errors that Disk Utility always warned me 'could not be repaired" that had me thinking I had a serious problem - -turns out it wasn't such a big deal

Time machine disk permissions changed to read only

Somehow, my Time Machine disk permissions have now changed tand my backups are failing;
The permissions are:
Me - read/write, Staff - read/write, Everyone - read only. I clicked on the lock and entered my system password, but I cannot change anything.
Then I ran Disk Utilities to repair and verify. Still nothing. I rebooted, logged out, logged back in, etc.
There is plenty of space left on the 2 GB drive. It is a Seagate GoFlex drive.This seems to be a new problems that has not surfaced before. My backups always ran flawlessly.
What to do?

10/22/13 7:44:57.820 AM com.apple.backupd[49208]: Backup failed with error: The target volume is read-only.
10/22/13 7:44:57.851 AM coreservicesd[66]: Application App:"UserNotificationCenter" [ 0x0/0xdd9dd9] @ 0x0x7fb372e4b9c0 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0xdc8dc8:, ASN:0x0-0xa50a5:) ), so denying.
10/22/13 7:44:57.851 AM WindowServer[1075]: [cps/setfront] Failed setting the front application to UserNotificationCenter, psn 0x0-0xdd9dd9, securitySessionID=0x186af, err=-13066
10/22/13 7:55:27.048 AM CalendarAgent[25590]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7ffba30190c0 {AccountName=Gmail, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7ffba247e7c0 [0x7fff7fa61110]>{type = immutable dict, count = 11,
entries =>
    0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7ffba24c02e0 [0x7fff7fa61110]>{contents = "nosniff"}
    1 : Case Insensitive Key: Content-Type = <CFString 0x7ffba2469b10 [0x7fff7fa61110]>{contents = "application/vnd.google.gdata.error+xml; charset=UTF-8"}
    2 : Case Insensitive Key: Server = <CFString 0x7ffba24e5590 [0x7fff7fa61110]>{contents = "GSE"}
    3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff7f24e928 [0x7fff7fa61110]>{contents = "Identity"}
    6 : Case Insensitive Key: Date = <CFString 0x7ffba2483320 [0x7fff7fa61110]>{contents = "Tue, 22 Oct 2013 11:55:26 GMT"}
    7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7ffba249b8c0 [0x7fff7fa61110]>{contents = "SAMEORIGIN"}
    8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7ffba24f24d0 [0x7fff7fa61110]>{contents = "1; mode=block"}
    9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7ffba24b3d40 [0x7fff7fa61110]>{contents = "GoogleLogin realm="https://www.google.com/accounts/ClientLogin", service="cl""}
    10 : Case Insensitive Key: Alternate-Protocol = <CFString 0x7ffba24e68f0 [0x7fff7fa61110]>{contents = "443:quic"}
    11 : Case Insensitive Key: Cache-Control = <CFString 0x7ffba24e0ee0 [0x7fff7fa61110]>{contents = "private, max-age=0"}
    12 : Case Insensitive Key: Expires = <CFString 0x7ffba24c1290 [0x7fff7fa61110]>{contents = "Tue, 22 Oct 2013 11:55:26 GMT"}
10/22/13 8:01:07.101 AM WindowServer[1075]: handle_will_sleep_auth_and_shield_windows: no lock state data
10/22/13 8:01:07.102 AM loginwindow[1074]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
10/22/13 8:01:07.103 AM WindowServer[1075]: Created shield window 0x809 for display 0x003f003d
10/22/13 8:01:07.103 AM WindowServer[1075]: handle_will_sleep_auth_and_shield_windows: no lock state data
10/22/13 8:01:07.103 AM WindowServer[1075]: Created shield window 0x80a for display 0x003f003e
10/22/13 8:01:07.103 AM WindowServer[1075]: handle_will_sleep_auth_and_shield_windows: no lock state data
10/22/13 8:01:07.108 AM WindowServer[1075]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04241110 device: 0x103b5d110 isBackBuffered: 1 numComp: 3 numDisp: 3
10/22/13 8:01:07.232 AM loginwindow[1074]: resume called when there was already a timer
10/22/13 8:01:29.746 AM coreaudiod[202]: Disabled automatic stack shots because audio IO is active
10/22/13 8:01:30.373 AM coreaudiod[202]: Enabled automatic stack shots because audio IO is inactive
10/22/13 8:01:33.595 AM com.apple.iCloudHelper[52460]: AOSKit ERROR: Setup request failed, [email protected], url=https://setup.icloud.com/setup/get_account_settings, requestHeaders=
    "Accept-Language" = "en-us";
    Authorization = "Basic ...";
    "X-APNS-Token" = f399cac3645458297dd7be50afbcef111e82ed4220706386f776a845c51135c9;
    "X-Aos-Accept-Tos" = false;
    "X-Mme-Client-Info" = "<MacPro5,1> <Mac OS X;10.8.5;12F45> <com.apple.AOSKit/152.4 (com.apple.systempreferences/12.0)>";
    "X-Mme-Country" = US;
    "X-Mme-Timezone" = EDT;
error=Error Domain=AOSErrorDomain Code=5002 "The operation couldn’t be completed. (AOSErrorDomain error 5002.)" UserInfo=0x7fcb08435310 {HttpStatusCode=401, DialogInfo={
    AlternateButtonLabel = "";
    AlternateButtonLink = "";
    Body = UNAUTHORIZED;
    DefaultButtonLabel = "mme.setupservice.SetupServiceJS.OK";
    DefaultButtonLink = "";
    DialogType = PasswordDialog;
    ErrorID = UNAUTHORIZED;
    Header = "";
    HelpLink = "";
    description = "These account credentials are unauthorized.";
    localizedError = UNAUTHORIZED;
    protocolVersion = 2;
}}, httpStatusCode=401, responseBody=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>protocolVersion</key>
        <string>2</string>
        <key>DefaultButtonLabel</key>
        <string>mme.setupservice.SetupServiceJS.OK</string>
        <key>Body</key>
        <string>UNAUTHORIZED</string>
        <key>ErrorID</key>
        <string>UNAUTHORIZED</string>
        <key>DialogType</key>
        <string>CustomDialog</string>
        <key>AlternateButtonLink</key>
        <string></string>
        <key>AlternateButtonLabel</key>
        <string></string>
        <key>localizedError</key>
        <string>UNAUTHORIZED</string>
        <key>DefaultButtonLink</key>
        <string></string>
        <key>Header</key>
        <string></string>
        <key>HelpLink</key>
        <string></string>
        <key>description</key>
        <string>These account credentials are unauthorized.</string>
    </dict>
</plist>
10/22/13 8:01:35.293 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:35.423 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:35.423 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:35.900 AM com.apple.iCloudHelper[52460]: AOSKit ERROR: Quota usage request failed, [email protected], url=https://p20-quota.icloud.com:443/quotaservice/external/osx/1170343864/getQuotaIn fo, requestHeaders=
    "Accept-Language" = "en-us";
    Authorization = "Basic ...";
    "X-Mme-Client-Info" = "<MacPro5,1> <Mac OS X;10.8.5;12F45> <com.apple.AOSKit/152.4 (com.apple.systempreferences/12.0)>";
    "X-Mme-Country" = US;
    "X-Mme-Timezone" = EDT;
error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7fcb0984dc00 {HttpStatusCode=401, DialogInfo={
    DialogType = Unknown;
}}, httpStatusCode=401
10/22/13 8:01:36.357 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:36.358 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:36.502 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:36.503 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:36.535 AM System Preferences[52480]: handleOpenParameter called activateIgnoringOtherApps
10/22/13 8:01:36.583 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:36.941 AM com.apple.time[1108]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
10/22/13 8:01:37.161 AM aosnotifyd[52497]: bootstrap_look_up failed (44e)
10/22/13 8:01:38.098 AM fseventsd[48]: Logging disabled completely for device:1: /Volumes/Recovery HD
10/22/13 8:01:38.153 AM fseventsd[48]: disk logger: failed to open output file /Volumes/JRL1/.fseventsd/00000000043da126 (No such file or directory). mount point /Volumes/JRL1/.fseventsd
10/22/13 8:01:38.241 AM fseventsd[48]: disk logger: failed to open output file /Volumes/JRL1/.fseventsd/00000000043da126 (No such file or directory). mount point /Volumes/JRL1/.fseventsd
10/22/13 8:01:38.771 AM locationd[52500]: NOTICE,Location icon should now be in state 0
10/22/13 8:01:39.397 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:39.438 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:39.672 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:01:39.672 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:39.672 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:01:39.673 AM System Preferences[52480]: INFO: FMM: can enable: YES
10/22/13 8:01:39.678 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:39.758 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:39.758 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:01:39.758 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:39.759 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:01:39.759 AM System Preferences[52480]: INFO: FMM: can enable: YES
10/22/13 8:01:39.759 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:39.759 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:01:39.760 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:39.760 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:01:39.760 AM System Preferences[52480]: INFO: FMM: can enable: YES
10/22/13 8:01:40.022 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:40.022 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:01:40.023 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:01:40.023 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:01:40.023 AM System Preferences[52480]: INFO: FMM: can enable: YES
10/22/13 8:01:40.151 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:40.340 AM com.apple.iCloudHelper[52460]: AOSKit ERROR: Quota usage request failed, [email protected], url=https://p20-quota.icloud.com:443/quotaservice/external/osx/1170343864/getQuotaIn fo, requestHeaders=
    "Accept-Language" = "en-us";
    Authorization = "Basic ...";
    "X-Mme-Client-Info" = "<MacPro5,1> <Mac OS X;10.8.5;12F45> <com.apple.AOSKit/152.4 (com.apple.systempreferences/12.0)>";
    "X-Mme-Country" = US;
    "X-Mme-Timezone" = EDT;
error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7fcb08412810 {HttpStatusCode=401, DialogInfo={
    DialogType = Unknown;
}}, httpStatusCode=401
10/22/13 8:01:47.781 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:01:53.583 AM App Store[52489]: No alternate URLs found for packageId com.apple.pkg.MakeQueuesScript
10/22/13 8:04:35.496 AM Mail[52536]: Using V2 Layout
10/22/13 8:04:35.675 AM librariand[52538]: MMe quota status changed: under quota
10/22/13 8:04:39.533 AM com.apple.SecurityServer[15]: Session 100508 created
10/22/13 8:04:42.421 AM com.apple.iCloudHelper[52460]: AOSKit ERROR: Setup request failed, [email protected], url=https://setup.icloud.com/setup/get_account_settings, requestHeaders=
    "Accept-Language" = "en-us";
    Authorization = "Basic ...";
    "X-APNS-Token" = f399cac3645458297dd7be50afbcef111e82ed4220706386f776a845c51135c9;
    "X-Aos-Accept-Tos" = false;
    "X-Mme-Client-Info" = "<MacPro5,1> <Mac OS X;10.8.5;12F45> <com.apple.AOSKit/152.4 (com.apple.syncdefaultsd/0.0)>";
    "X-Mme-Country" = US;
    "X-Mme-Timezone" = EDT;
error=Error Domain=AOSErrorDomain Code=5002 "The operation couldn’t be completed. (AOSErrorDomain error 5002.)" UserInfo=0x7fcb09b00080 {HttpStatusCode=401, DialogInfo={
    AlternateButtonLabel = "";
    AlternateButtonLink = "";
    Body = UNAUTHORIZED;
    DefaultButtonLabel = "mme.setupservice.SetupServiceJS.OK";
    DefaultButtonLink = "";
    DialogType = PasswordDialog;
    ErrorID = UNAUTHORIZED;
    Header = "";
    HelpLink = "";
    description = "These account credentials are unauthorized.";
    localizedError = UNAUTHORIZED;
    protocolVersion = 2;
}}, httpStatusCode=401, responseBody=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>protocolVersion</key>
        <string>2</string>
        <key>DefaultButtonLabel</key>
        <string>mme.setupservice.SetupServiceJS.OK</string>
        <key>Body</key>
        <string>UNAUTHORIZED</string>
        <key>ErrorID</key>
        <string>UNAUTHORIZED</string>
        <key>DialogType</key>
        <string>CustomDialog</string>
        <key>AlternateButtonLink</key>
        <string></string>
        <key>AlternateButtonLabel</key>
        <string></string>
        <key>localizedError</key>
        <string>UNAUTHORIZED</string>
        <key>DefaultButtonLink</key>
        <string></string>
        <key>Header</key>
        <string></string>
        <key>HelpLink</key>
        <string></string>
        <key>description</key>
        <string>These account credentials are unauthorized.</string>
    </dict>
</plist>
10/22/13 8:04:42.834 AM WindowServer[1075]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
10/22/13 8:04:45.323 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:04:45.342 AM xpcd[25595]: AOSAlertManager[52545]: registration request failed: (0x12, 0xd) process failed sandbox check
10/22/13 8:04:45.369 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:04:45.369 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:04:45.370 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
10/22/13 8:04:45.370 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
10/22/13 8:04:45.370 AM System Preferences[52480]: INFO: FMM: can enable: YES
10/22/13 8:04:53.708 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
10/22/13 8:04:53.796 AM AppleIDAuthAgent[48807]: SERVER AppleIDAuth: Already existing account "jo...ne@?????.???" re-added; succeeded.[ NULL ] (__AppleIDDoAddAppleID()/AppleIDAuthenticationImpl.cpp #169) com.apple.coreservices.appleid.authentication.peer.0x7fa3eb600e.xpcq

Repairing disk permissions from single user mode

I accidentally changed the disk permissions on my Macintosh HD to "none" for everyone, except system and admin, who both still have read/write/exec privileges. Now, my Mac won't boot up. What can I do to fix this from single user mode or verbose mode?

Hi,
if you reboot your mac and press Command -R you can start in recovery mode and repair the permissions.
here you can find how to proceed http://support.apple.com/kb/HT4718

I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in.

I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in

Try to put your headphones several times in and out from your connection, might be the switch is stuck. Normally it should work again while trying to plug the headphones in and out!

How do I restore my disk permissions?

I'm running 10.6.7 on a 2.8GHz i5 iMac. Was having issues so I ran disk repair followed by repair disk permissions in Disk utility (something I know now that I should not have done). Now I'm locked out of my external drives (padlocks on the desktop icons). Tried to switch permissions back to "read and write" in the "get info" window of the external drive but it keeps reverting back to "custom". Tried running some terminal commands that was supposed to restore my permissions but got "drive not found." Now what?

Yes you can erase the drive and reinstall OS 10.6 from the original disk.
1. Put the disk in and restart the computer while holding the C key down. (The letter C.)
2. When the computer boots you will see the beginning of the OS installation, and have to select a language.
3. On the next screen there is a menu bar. Click Utilities on the menu bar and select Disk Utility.
4. When DU is running, select the hard drive in the left hand column, format should be Mac OS extended journaled, then click Erase.
5. When that task is done, quit DU and proceed with the installation. It will take some time.
6. The computer will restart after the installation is completed and show you an awful noisy welcoming screen.
Then you have to enter information about yourself.
7. Run Software update to get to OS 10.6.8.
Now you can go to the App store and find your previous purchases. You will not have to pay for them again. And you do not have install them one at a time. If for example you want 10.9, and your computer can handle it, go directly to 10.9.1 from 10.6.8.

Repair Disk Permissions Issues

I'm not sure I am posting this in the correct community but here goes . . .
I have a 17" Macbook Pro running the latest version of Snow Leopard. It is almost 2 years old and I have 4 gb RAM.
Recently, it seems to be slowing down and I have to run repair disk permissions 2-3 times a week to recoup a little speed. I also delete my Firefox cache regularly to try to gain a little there. I do make a few videos in iMovie and initially I thought that was the problem but this week I have not really worked in iMovie much and it is still slow. There seems to be some issues in the log of the repair permissions. I hope they show in this image. I don't know what these mean or how to fix them. It is the "permissions differ" entries I am confused about.

You can ignore those permissions per support article
http://support.apple.com/kb/TA21090
Since you brought up iMove, I suspect your storage is nearly full as this most certainly causes the computer to slow down. video files are the biggest culprit.
Look in your Activity Monitor and reduce the drive space by copying to a external, Disk Utility HFS+ formatted external powered drive of unnecessary files so your boot drive is ideally below 50% filled (yea I know but the computer slows down after that) and not more than 75% filled.
Once you have done that. Get another newer external powered HFS drive and download the free Carbon Copy Cloner and clone the internal drive to the external.
Hold option and boot off the external clone, test it out then use Disk Utility to erase the internal and then reverse clone the external onto the internal, this will defragment and optimize your drive so the OS and programs are on the fast part of the drive, not the slow parts.
Reboot into the internal and run off of the free OnyX's maintainence and cleaning aspects and reboot.
http://www.titanium.free.fr/
Sir speedy machine here we come!
Now of course you may have other issues that could be causing your slow down, like not enough RAM or some sort of failed process or leftover program, tweaks or simply a slow Internet.
You can opt to simply reinstall OS X 10.6 ( by holding c and booting off the installer disk ) over your installed version (doesn't touch files or programs) then immediatly Software Updating until clear, that will clean anything hanging out in OS X.
If you still have slowdowns, then it's in what geeks call "User land" basically something installed outside of root, like a program or only runs in user, not in OS X.
For that you need to create a new user, transfer your files via the Shared Drop and wean yourself off the old user and finally delete it. Also install all new versions of your third party programs removing the originals first.
That should do it.

Repair Disk Permissions utility stalled - I have read the knowledge base

I have researched the knowledge base and search for posts on this and cannot find answer: Running 10.4 at the latest version. used the original install 1 disc I received with Tiger to repair disc permissions (like Apple support has told me to do in the past, but my current research said I do not need to do this unless certain parameters are met, and none of the parameters applied, but oh well, I am here anyway). Cold Boot from the original install disc 1 and slected the start up disk I use (I only have one start up disc/drive). Did a repair disc permissions and got a long running routine that reporting a lot of fixes, then the utility has stalled -- no progress on the progress bar. I "stopped" the process using the "stop repair" button (three times). The log reflected the utility stopped, but the progress bar still is blue and not moving (for a couple of hours). When I go to quity File >Disk Utility, it warns me that Disk Utility is running and this may make my system unstable/unsuable.
QUESTION: CAN I JUST QUIT DISK UTILITY AND NOT HAVE ANY ADVERSE AFFECT ON MY IMAC DRIVE?

Thanks for your advice, I still have an issue:
-after the first repair disk permission "stalled" process, I exited Disk Utility and cold booted the machine after I had disconnected all external devices other than the original iMac keyboard
-obtained the combo patch for 10.4.7 from the Apple download site (it had already been installed but I reinstalled per your advice)
-re-applied the combo patch and then did another cold boot
-ran Disk Utility from the original Tiger install #1 disk, and then selected "repair disk permissions" for my start up disk (I only have one)
- process ran for 10 minutes or so then gave the following error message: "Disk Utility Error: Disk Utility has lost its connection with disk utility management tool and cannot continue. Please quit disk utility and re-launch disk utility"
- I pushed the "stop disk permission repair" button, then quit disk utility, then cold booted the machine again.
-re-applied combo patch as above, then cold booted the machine
-ran disk utility from the original iMac install #1 disk, ran "repair disk permissions", and then received the same error message as above.
- I then just quit Disk Utility and cold booted the machine again and went about my business. There does not seem to be any problem with the machine (was not before, but I ran repair permissions thinkging this was a routine maintenance taks that should be run)
- in my prior search of the knowledge base, I found the following information about repair disk permissions:
Location: http://discussions.apple.com/thread.jspa?messageID=607495&#607495
How often should I Repair Permissions?
You do not need to Repair Permissions on a regular basis.
There are only three occasions you need to do this:
1. When you have just installed something that required you to run an Installer, rather than just copying some software to a folder. This should be done for both Apple and non-Apple software.
2. When you have been working on your OS X files or folders while booted from OS 9, or remotely connected via a non-OS X machine, since OS 9 and other systems do not handle OS X's permissions correctly.
3. The other case is if your system is behaving strangely, when you should run Disk Repair from your CD followed by Repair Permissions. This is just to eliminate these things before going on to further trouble-shooting.
Otherwise you can happily forget about Permissions!"
So, it would appear I do not need to do anything else; the machine seems to be working properly. Is there anything else I need to do? thanks for the help! Bob

Need advice on Repairing Disk Permissions...

I need some input from those who know how to Repair Disk Permissions (under Disk Utility, for those who don't know).
Basically, I lost a TON of my Access and Privileges on my G4 recently--which I really only noticed after iTunes would no longer let me import anything (no matter how many times I tried changing the Ownership & Permissions on my Music folder's Info section)--which, I might add, I suffered due to a virus caused by Limewire. As had been suggested to me, I Verified Disk Permissions, and saw that I had a TON of problems listed on my startup HD. So I'm now seeking ways to repair them.
Now, the most obvious way is using the Repair Disk Permissions program (which I've actually never had to use before). However, under OS10.3.9, when I select the Repair Disk Permissions on Disk Utility, in listing all my Drives available, it actually shows the drive in 2 formats/pictures:
1) the actual technical name/manufactor model/GB size of the drive (on top), and
2) the Desktop name and Icon picture of the Drive as it appears on my desktop.
This confuses me: as you can guess, the startup Drive in question is only partioned as one. So on Disk Utility, which of these 2 pictured drives do I have to highlight and Repair Disk Permissions to (i.e. 19GB Maxtor32049 Vs. 'HAL')?
Also, for those of you who have used other means (programs) to change Disk Permissions, which would you recommend? For example, I got a program from Versiontracker called BatCHmod, but I don't know if something like it is any safer than just using Repair Disk Permissions. Because unfortunately, I'm running out of room on my disk, and don't have nearly enough space on my other drive to hope to back the whole Drive up to.
Please help!!!

Hi phasmatrope!
TO REPAIR PERMISSIONS ON THE STARTUP DISK
1.Open Disk Utility, located in Applications/Utilities, and select the startup disk HAL, in the left column.
2.Click First Aid.
3.Click Verify Disk Permissions to test permissions or Repair Disk Permissions to test and repair permissions. (I never "Verify". Just run "Repair".)
Rerun RP until the only message it reports is:
"We are using special permissions for the file or directory ./System/Library/Filesystems/cd9660.fs/cd9660.util.
New permissions are 33261"
This is a status message and not a cause for concern. You may safely ignore it.
Or these:
"We are using a special uid for the file or directory ./private/var/at/jobs. New uid is 1"
"We are using a special uid for the file or directory ./private/var/at/spool. New uid is 1"
Again, these are status messages, which appeared after Security Update 2005-001.
There may be others that you can ignore. Complete lists at link below.
Spurious Permissions Errors In 10.3.x
When "Repair Permissions" is complete. Quit "Disk Utility".
Good Luck!
ali b

Repair disk permissions

why did upgrading my software to snow leopard cause my 'repair disk permissions' to endlessly fail when it never failed once before? by the way i heard all the debate of how repairing disk permissions is or is not important to do. at this point i'm not interested in opinions of why it's important or not i'm just interested in fixing this now existing problem. my software is all updated. any answers appreciated.

     WZZZ wrote:
     "If you updated from Tiger, then you are not used to seeing the same Permissions messages repeated. In      Tiger, repairing Permissions didn't endlessly repeat these."
exactly my point, it worked perfectly. it corrected lines that contained characters that affected my disk burner.
     WZZZ wrote:
     "But these are not errors."
     WZZZ wrote:
     "It means Apple hasn't gotten around to updating the Permissions database (and probably never will.) If you see the same ones, just ignore them."
just ignore the problem=apple failure
thank you for the info

Broken disk permissions

Similar Messages

Maybe you are looking for