BrowserLab login NOT WORKING CORRECTLY - going round in circles

Hi, I tried, as normal to log into Browser Lab and got the new "sign into CS Live and CS5" thingy, which then sent me round in a big CIRCLE. Ending up with not getting onto Browser Lab, but being asked again if I want to sign up for CS Live. Have I broken it?
Yup, just tried again, going round in circles. Somebody broke it, tsk tsk. Any ideas ?

I can't get into BrowserLab either.  I've used it several times since getting CS5, but over the past week or two, every time I try I just get the loading bar.
In Safari, I can't even get to the landing page--i.e. the one with the big red "Try BrowserLab" button (http://www.adobe.com/go/browserlab_cslive).  That gives me the same fullscreen gray page with the loading bar in the middle.  Oddly, there doesn't seem to be an option on the Adobe site to log out and then log back in so I can retrace my steps through the sign-up process as you suggest.  In Firefox, the landing page appears, but when I click "Try BrowserLab" I get the same loading bar, taunting me.
In Dreamweaver, I click the CS Live button up top and it tells me "The application is not connected to the internet."  Is there a particular way I need to connect Dreamweaver to use CS Live/BrowserLab?  I connect using FTP just fine and upload/download files all day.  Don't use a proxy.
Looking forward to using CS Live once again.  It was a cool feature, the few times I was able to use it.
Thanks,
thewocky

Similar Messages

  • TS4185 Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there?

    Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
    There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFP

    I suspect it has to do with not having a more current operating system
    Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
    What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
    http://roaringapps.com/apps:table
    Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
    A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
    Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
    Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
    Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
    So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
    Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
    OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
    The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
    But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
    Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are.

  • Focus under Win2k does not work correctly

    Hi,
    we've found out that the focus does not work correctly under Windows 2000 in
    Seamless Mode (App is a Windows Application running on Windows Terminal Server
    2003), the same application has no problems under Windows XP, Apple Macintosh
    and Linux.
    Example: The application has a button which pop's up a small calendar window
    giving that window focus. In Tarantella under Win2k however you just see the
    window popping up shortly and then going in the background. As the window is in
    the background and you can't get the window back and you also cannot work
    further in that application as the rest is inactive.
    Only way is to do a right-click on the application in the taskbar, which brings
    the window in the foreground again. What makes this problem even harder to
    analyze is, that it sometimes even works correctly (around 3 of 10 times).
    We've mostly recognized this with modal windows. The native client does not have
    this problem, however as far as I know it does not support seamless mode.
    2. The second problem we got is, that if you click with the mouse into the
    initializing Window while the application starts up after you have clicked on an
    application Link in SGD (I mean the Pre-Login window of Windows which shortly
    shows up just before the Login Process begins),
    the application is not started seamlessly but is started within that window and
    you have no chance but closing an restarting the application to get it in
    seamless mode. This is seen on all Client Operating Systems by us and not only
    Windows 2000.
    The Client runs:
    Windows 2000 SP4 all updates installed
    Java: 1.5.0-5
    Browser: IE6.0 and Firefox 1.0.7
    Server: Windows 2003 Terminal Server (all updates installed)
    Tarantella: 4.20.909
    I hope that someone has at least a workaround.
    Regards
    Carsten

    I have organized some testcases attached are 3 Test Programs which work
    nice natively but got these problems under Tarantella under every Windows
    Operating System (the error is not Windows 2000 as I previously mentioned but
    also occurs on Windows XP).
    The interesting thing is that the Test Program made with .NET does not show this
    problem.
    Could someone please test these and tell if this error is reproducible on your
    systems as well ?
    Run these Testprograms natively, they show no misbehavior.
    Execute this from a SGD Webtop Session in Seamless Mode, see that
    the Modal window is not modal but shifts into the background on every 2 -3 click.
    Regards
    Carsten
    [ModalTestPrgs.zip]

  • If statement within a view is not working correctly ?

    Hi all,
    maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
    I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <% if not isframe is initial. %>
      <htmlb:content design="design2003">
         <htmlb:page title = "Top Level Navigation view">
    <% endif. %>
    hallo world
    <% if not isframe is initial. %>
         </htmlb:page>
      </htmlb:content>
    <% endif. %>
    thanks in advance and best regards
    Matthias Hlubek

    Matthias,
    The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <% if isframe is <b>NOT</b> initial. %>
    <htmlb:content design="design2003">
      <htmlb:page title = "Top Level Navigation view">
        hallo world
      </htmlb:page>
    </htmlb:content>
    <% else. %>
      hallo world
    <% endif. %>
    So why does your example not work? Let us start with a simple tag:
      <htmlb:page title = "Top Level Navigation view">
      </htmlb:page>
    Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
      DATA: tag TYPE REF TO cl_htmlb_page.
      CREATE OBJECT tag.
      tag->title = 'Top Level Navigation view'.
      IF tag->DO_AT_BEGINNING( ) = CONTINUE.
      ENDIF.
      tag->DO_AT_END( ).
    You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
    <% if isframe is NOT initial. %>
      <htmlb:page title = "Top Level Navigation view">
    <% endif. %>
    <% if isframe is NOT initial. %>
      </htmlb:page>
    <% endif. %>
    And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
    if isframe is NOT initial.
      DATA: tag TYPE REF TO cl_htmlb_page.
      CREATE OBJECT tag.
      tag->title = 'Top Level Navigation view'.
      IF tag->DO_AT_BEGINNING( ) = CONTINUE.
    endif.
    if isframe is NOT initial.
      ENDIF.
      tag->DO_AT_END( ).
    endif.
    You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
    The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
    brian

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HT1547 My mac book pro is 3 yrs old and today while watching something on it, it got power off suddenly. And power button is not working, left side round button to battery is not working but when I plugg in to charge it, then this round button shows 4 gre

    I am having MacBook Pro 3 yrs old and today while I was watching some movie on it suddenly it got power off and when I am trying to start it, it's power button is not working even the round button on external left side is not showing battery lights. But when I connect it to chrger then Charger only gives green light and even the external round button only shown 4 green lights (if charger connected). I don't know what to do now

    Sounds like you need a #1SMC Reset
    1. SMC reset
    >>Instructions to reset SMC
    Disconnect other non-Apple and external hardware except (if applicable) a mouse and keyboard until your finished repairing your machine.
    Problems solved: Fans blowing with no activity, machine is not booting, power button pressed and nothing happens, problems with indicators, Magsafe has wrong lights, battery is not charging, monitor and graphics issues etc.  If the battery is not charged (from like letting it sleep too long), let the Mac charge up awhile afterwards.
    Will not hurt the machine resetting if it's not broken.
    Other related hardware problems (optional):
    Check battery status: Hold option/alt key down while clicking on the battery icon in the menu bar, top right corner.
    Magsafe: Use the correct/matching power supply charger with your Mac, not a less powered one from another Mac.
    Apple: Laptop won't power up   Apple: Computer won't power up  Troubleshooting optical drive
    Magsafe problems   Magsafe problems more

  • Share point in server admin not working correctly... I think

    I suspect that the share point in server admin is not working correctly. In workgroup manager when I click on a user and then click on the "home" tab, under the full path field I see a file path of:
    afp://server.mydomain.com/Users
    However if I go to Server Admin -> AFP -> Share Points then click on the Users share and then click on the share point tab below, enable auto mount is disabled. How can this be possible? I thought for a directory to show up in home in workgroup manager it had to be set as an auto mount. Has something possibly corrupted? And what?

    Here's a bit more information about our setup and our experiences with Apple's CUPS implementation:
    On the server, all printer queues are set up with only lpr and ipp sharing enabled with the PPD setting for each printer set to Generic Postscript. We found that setting the PPD to the printer specific one on the server caused problems when clients tried to use printer specific options, like paper tray selection, etc.. The selection would be undone, apparently because the driver on the server would override the previous settings. Using Generic Postscript allows the client PPD settings to go through unmodified. Our printers are general a mix of HP LaserJets and some Sharp Copiers.
    All clients use lpd to the server queues with the printers' actual PPDs configured. Using ipp is superior in that printer feedback (jams, out of toner, etc) makes it back to the clients, but ipp only works when the client, the server, and the printer are on the same network. If the ipp client is not on the same network, the client spooler immediately goes into a paused state and the print job is stuck on the client.
    Using lpd to the server queues works reliably, but there is no feedback to the client. Jobs disappear from the client queue and go to the server, appearing to the user as a successful print. If the printer is down, there's nothing they can see or do about it.

  • Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly

    Exchange 2013 SP1.  On going Saga-  Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
    The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
    chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
    The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
    We tried:
    1. Populating both Autodisover internal and external urls with the legacy namespace
    2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
    3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
    I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
    Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
    Everything else externally was working when we cut over.
    any and all help appreciated
    Tony

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing.
    Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

    Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
    Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
    I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

    I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

  • Sleep not working correctly

    Since updating my Late 2010 iMac to Moutain Lion the sleep function does not work correctly. They system keep waking up for no reason. The monitor comes comes day or night. I cannot figure out a fix or work around. Any ideas?

    Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows: 
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
     Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • LoginFilter not working correctly

    My Login filter is behaving very strangely. Here is the relevant code from the filter.
    if (o != null
                    || (url != null && (url.indexOf(LOGIN_URL) > 0
                            || url.indexOf(LOGIN_FORM_URL) > 0
                            || url.indexOf(EXTERNAL_LOGIN_URL) > 0
                            || url.indexOf(EXTERNAL_LOGIN_FORM_URL) > 0
                            || url.indexOf("images") > 0 || url.indexOf(services) > 0))) {
                chain.doFilter(request, response);
                return;The problem is we are trying to allow an external application to log into mine. The external application generates a link with an /externalLogin.do as the href. It steps into the above code and the indexOf() correctly finds it and the chain.doFilter is executed. But it never makes it to the externalLoginAction.java.
    If I copy the link and put it on my Login.jsp page and click it, it makes it to the chain.doFilter the same but then continues on to the externalLoginAction.java.
    So it look like the chain.doFilter is not working correctly if it is not comming from the same context?
    Anyone have any ideas?

    stupid stupid stupid.
    The first url was passing userName and password in the URL the second somehow got changed to userId... so struts was kicking it back.. just changed my struts config to not validate the external login form.

  • Three Point Edit not working correctly :(

    Hi there,
    first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
    It appears that 3 point editing ist not working correctly.
    Right now I'm editing a video and I heavily rely on 3 point editing.
    I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
    Coming from tape workflows I really don't like clicking clip after clip...I need to edit
    Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
    Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
    As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
    Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
    It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
    Make us editors happy having switched from Avid/FCP etc.
    Make essential stuff rock solid. That's what makes an app "pro".
    Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )

    bmfm_ wrote:
    I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
    Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
    Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
    Hi bmfm,
    I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
    Thanks,
    Kevin

  • Safari hierarchical menus not working correctly

    Hello all,
    I'm having a problem with Safari's hierarchical menus not working correctly. They pop out in odd positions, and--worst of all--the big ones (for folders that contain lots of bookmarks) pop out right on top of the main bookmarks menu, making it all but impossible to navigate that main menu. I've tried all the usual tricks: log out/restart the system, restart Safari, reset Safari, boot in safe boot mode, repair permissions, yank Safari's bookmarks prefs file, even reinstall Safari, and nothing worked. I've also noticed the same behavior in Camino. My system hierarchical menus work fine, though, so I'm thinking I have a corrupt prefs file somewhere. I'm using Safari 4.04 with no extra plugins beyond what come with it on 10.5.8. Does anyone know what's going on and how to fix this?

    AFAIK, the submenu will pop on either side, depending on available space and if there are further subfolders, allowing them to continue in the same direction.
    Since the new account doesn't exhibit the issue, there are two ways to attack the problem. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything not on that list into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
    The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

  • Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

    Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly.  The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything.  I have taken my car to my local dealer but they say the Radiosat is working ok?

    Hello there stidhambr15,
    I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't quite get the device going again, I recommend restoring the device.
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
    iPhone and iPad: How to remove the SIM card
    http://support.apple.com/kb/ht5163
    iPhone 4 (GSM model)
    iPhone 4S
    Cheers,
    Sterling

  • Sonata font on MacOS - not working correctly

    Hi,
    I just downloaded and installed the Sonata Standard OpenType file via FontBook in MacOS 10.9.2. So far the font is not working correctly in either MS Word or Apple Keynote -- I get standard qwerty letters rather than musical notation. Anyone ideas on how to fix/troubleshoot?
    Thanks!

    Hello RKmark,
    Thank you for going through the process of using those custom keyboard layouts. It was my pleasure to work on those some years ago.
    There is a reason why the placement of some characters on those custom layouts seems arbitrary: They were intended to replace the experience a user would have when using the same PostScript font, which was directly mapped to the characters available on the keyboard. Of course they could be re-arranged today – but that would mean opening a whole different project; and would probably question some of the semantics within Sonata.
    Back to your problem:
    I just tested the keyboard layout for Sonata, together with the Sonata OTF in InDesign, and I did not find any problems.
    Of course this does not help you. So let me just describe what I did:
    I copied the OTF file, to ~/Library/Fonts
    I copied SonataStd.keylayout to ~/Library/Keyboard Layouts
    Admittedly, in OSX Mavericks it is a bit more complicated to install a custom keyboard layout:
    In System Preferences, go to Keyboard and Input Sources.
    Click the + button at the bottom left, scroll down the list and select “Others”.
    In the list to the right, you will find a “SonataStd” keyboard layout, it has a grey icon. Click Add.
    After adding this layout, you will be taken back on the Input Sources screen. Check the box next to Show Input in menu in menu bar if it is not yet active.
    Back in InDesign, create a new text box, select SonataStd, and choose the SonataStd keyboard layout from the menu bar (marked by the flag of the country representing your keyboard).
    Now you can begin typing. I could type the sixteenth-note-rest on a US keyboard with alt-x.
    However, one thing I have observed:
    If you have set any custom keyboard shortcuts in InDesign that are using the alt-key; they might get in the way of typing some of the symbols.
    Which of the available symbols in Sonata are you missing in the custom keyboard layout? I tested them all, and could type everything.
    What sometimes happens is that the keyboard layout will switch back to default (US in my case), which then looks like the Sonata keyboard layout is not working.
    My personal opinion on this: The keyboard layouts are a nice idea for making glyphs accessible to users that don’t have a glyph palette, but they can be very confusing. They will interfere with the normal usage of the application and OS, since standard keyboard shortcuts will no longer work – simply because they rely on the standard keyboard layout of your system.
    Personally, I would use the glyph palette in most cases, simply because switching keyboard layouts back and fort would get to tedious for me.
    I hope this helps, let me know if you have any further questions.

Maybe you are looking for