Browserlab not loading and showing page error

Hi!
Have been using BL for while, works great for (X)HTML sites. I am now starting to work with PHP and have developing a site with DW and Cartweaver for a store, and I cannot get it to show in BL. I am on a Mac, OSX, MAMP (Apache/MySQL). My site shows fine in Live View, and the various browsers on my Mac, but I need to check against IE versions. My site looks as though it is set up correctly etc. please can you point me in the right direction to get BL to work for this?
Thx,
Rob

Got the screenshot, thanks. And hello again Rob
Follow-up:
2) Not sure that it matters, but what's the url you see in the BrowserLab UI after making the request? What path do you have defined as the Local Site Path in your site definition in DW?
3) How are you requesting the screenshots? From the BrowserLab panel inside DW?
4) Open up the BrowserLab panel in DW and see what the drop-down control is set to. If it doesn't say "Local" change it to Local and press the preview button and let me know what happens.
6) I want to make sure that none of the assets your page(s) need live outside the directory you've got within your DW site definition.
Thanks,
Mark

Similar Messages

  • Photoshop Elements not loading and shows error

    I have a sony vaio lap with win-8 OS and the PS Elements licensed version came built in and now the thing is my friend has unknowingly uninstalled PS and now i have restored it by running the system restore. But the problem is now it is restored but when i try to start it is not starting and shows an error "PHOTOSHOP ELEMENTS CANNOT START OR CONTINUE BECAUSE OF MISSING FILE(S). PLEASE REISTALL "
    can anyone help me to fix this thing out...........!

    You may need to install the licensing update:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Install_the_licensing-s ervice
    If that doesn’t work, try Adobe’s troubleshooting steps, which include reinstalling with all background services including anti-virus disabled (what Adobe calls “simplified mode”) and running as administrator:
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Try_Adobe’s_generic
    The Adobe tech note explains how to run in simplified mode.  Note that on Vista, running a program as administrator is different than running it from an administrator account – the tech note explains how to do that.

  • VisualRF not starting and showing communication error timeout

    Problem:
    VisualRf is not starting and shows connection timed out on the Airwave GUI.
    If we look at the visualRF logs,  from the location /var/log/visualrf/visualrf.log
    we can see the below error in the log:
    2015-06-14 11:53:29,461 WARN Inventory com.airwave.amp.RoleParserImpl Existing login cookie is null. Initialize amp login. 
    2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl Failed to initialize session cookie. 
    2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl prepareMethod 
    java.lang.Exception: Failed to login.
    Diagnostics:
    When we look at the below error,
    java.lang.Exception: Failed to login.
    We could see that VisualRF is trying to login to Airwave database and failing to login for whatever reason. When we look at the Airwave database for this visualRF user, we could see this below:
    The highlighted username in Yellow is the visualRF, VisaulRF creates this username randomly and we could see that login_attempts for this user is 10 and Airwave disables the user after 10 attempts. Therefore that explains why is_enabled  is 0.
    This could happen for different reasons, when we restore the visualRF backup and backup has some issues or when we do a vrf bootstrap, to do a factory reset on visualRF or could be any other reason.
    Solution
    To resolve this issue, all we need to do is update the Airwave database to enable this user, as shown below:
    [root@localhost mercury]# dbc "update users set is_enabled = 1 where username = 'AihmrH3MHQ';"
    once done, VisualRF would start working normally.

    Got the screenshot, thanks. And hello again Rob
    Follow-up:
    2) Not sure that it matters, but what's the url you see in the BrowserLab UI after making the request? What path do you have defined as the Local Site Path in your site definition in DW?
    3) How are you requesting the screenshots? From the BrowserLab panel inside DW?
    4) Open up the BrowserLab panel in DW and see what the drop-down control is set to. If it doesn't say "Local" change it to Local and press the preview button and let me know what happens.
    6) I want to make sure that none of the assets your page(s) need live outside the directory you've got within your DW site definition.
    Thanks,
    Mark

  • HT3805 My Aperture 3 just crashed, i.e., it would not open and showed an error message -1712.  I sent the current version to trash and reinstalled from my A3 disk, but after installing again it still says "Aperture can not open -1712."

    My Aperture 3 just crashed...by that I mean it would not open and showed the message: "Aperture 3 cannot open.  -1712."  I have the latest A3 version and had been using it continually for 3 years.  This was the first crash.  And it will not open as often as I tried.
    I am using a 13" Macbook Pro with OSX 10.8.5.
    I tried sending the A3 application to trash, and reinstalling from my A3 disk.  Install message said "installation successful."  But A3 would still not open and gave same message with -1712.
    Any suggestions what I should do or try?
    Thanks

    Perhaps your Aperture library was damaged, when Aperture crashed. What where you doing, right before the crash happened?
    - If you installed new software - programs, plug-ins, preferences panels, check, if they are compatible.
    - If you imported new images, you may have imported corrupted files, that crash Aperture.
    Can Aperture launch correctly, when you try to open a new Aperture library?
    Hold down the options-key, when you launch Aperture and select to create a new library. Import a few images. Does that work?
    If Aperture will launch on a new Library, try to repair your current library. Hold down the key-combination option-command ⌥⌘  firmly while double-clicking the Aperture library to open in First Aid Mode. Hold the keys down, until the panel appears, and then try  the First Aid Options in turn.
    I have the latest A3 version
    Is it Aperture 3.4.5? The latest Aperture 3.5.1 will not work with Mt. Lion.

  • HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.

    Mail application does not work after upgrade to Mavericks.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

  • While trying to open the order in co03 or co02, It is not opening and showing the error message as "Inconsistent data : order 107434 16.09.2013, duplicate entry o 0020. is showing ?

    Hi,
    While trying to open the order in co03, co02, I am getting the below error message : Inconsistent data : order 107434 16.09.2013, duplicate entry o 0020 is showing. Please guide me the way forward.
    Regards,
    Mastan.

    Hi Mastan
    The report mentioned by Rajen should clear the inconsistent records.
    Please observe that you could have found this by yourself report with a quick note search for this error message or even searching for old threads.
    Even a google search points to the solution.
    You should do your own research before opening such kind of thread.
    BR
    Caetano

  • I have installed safari but it is not working and showing the error message

    i have downloaded a latest version of safari and as i install it it is saying something like this
    "Your copy of safari is missing important software resources. Please reinstall safari"
    and even if i install it it says the same on opening safari after reinstalling i hate slow speed and i want it please help me ie8 is very bad to use
    http://img251.imageshack.us/img251/2295/screensnaperimagee.png

    That sounds like your Apple Application Support might be damaged. (Safari needs a properly functioning Apple Application Support in place in order to work correctly.)
    Perhaps try uninstalling both Safari and Apple Application Support, and then reinstalling Safari (which should also reinstall Apple Application Support). Does safari now launch without the error message?

  • I have adobe photoshop cs6, but after offline activation by legal SN its just not working and showing no error, why?

    After installation and registering CS6 i tryed to run aplication and it works only 5 secs ... and i dont know why .. ?

    Yes it quit itself silently .... and i dont know why... i have to say .. that i have adobe photoshop CC  too ... and its working perfectly .... but i need cs6 for my work too ..:/

  • Project server 2013 - PWA: My Tasks page is not loading and disabled

    Hi
    i had an issue that suddenly occur for one of my users (just to him).
    My Tasks page is not loading, it shows "Loading" in the middle of the page and stuck that way, and also the Ribbon buttons are disabled.
    Anyone knows what could he had done to make this happen?
    The print screen is in Hebrew but i described what appears.
    Ofir Marco , MCTS P.Z. Projects

    Hi Ofir,
    I've had a similar issue in a previous version of Project Server. A corrupted assignment was causing this in my case. I found the corrupted assignment using the following procedure:
    Retrieve all published assignments & related projects for the user (in the database)
    Open each project one by one in MS Project & set the 'Publish' value to 'No' for the user's assignments and publish the project
    Everytime after publishing a project, retry to open the Tasks page
    At a certain moment your Tasks page should work again and you know now which project/assignment is causing the error, just replace the corrupted assignment by a new one and it should work again
    Hope this helps

  • Slow DL/UL Speeds, Pages not loading, and inability to play games online

    I noticed bad connection speeds on Wednesday and called tech support. They sent a technician out who replaced the modem and did some work on the lines. Long story short, my speeds are still poor, pages are not loading, and I am unable to play computer games without lag so significiant that playing becomes frustrating. This has been 5 days of awful connection (Thursday through Sunday I was without wireless because the tech support agents were not helpful).
    I am really fed up with the way that Verizon has handled this issue. They have been very good in the past, but this situation has left me in a situation where I might have to cancel service since what is being provided is insufficient. Any help with this would be great, since I would like to give Verizon one last chance before I go look for a new provider (I have called tech support 5-6 times, tried their chat service, and also sent an email to customer service)

    2)No idea how to provide Transciever Statistics
    3) The Modem is a Westell 6100G
    -) The Router is a Linksys WRT54G
    Ok.
    If the following things are true:
    #1 You did not follow the advice in http://www.dslreports.com/faq/13600
    #2 You did not change the LAN IP of the Westell (still at 192.168.1.1)
    #3 You changed the LAN IP of the Linksys so it's LAN IP does not start with 192.168.1 (for example 192.168.2.1)
    #4 The WAN port of the RJ-45 WAN port router is connected to the modem.
    ...Then
    #1 Visit http://192.168.1.1/ for me and do the following:
    a) If you see a Blue and White Westell page, mouse over Troubleshooting, go to DSL, and choose Transceiver Statistics. Copy and Paste the information on that page.
    b) If using the Red and Black Firmware: Go to System Monitoring > Advanced Monitors > Transceiver Statistics. Copy and Paste the information on that page.
    c) Try visiting http://192.168.1.1/transtat.htm which is a direct link to the Stats on older modems.
    d) If you need a Username and Password, try the following:
    admin/password
    admin/password1
    admin/admin
    admin/admin1
    admin/Serial Number
    By Serial Number, I don't mean type in the words Serial Number. I mean find and type in the serial number found on the bottom of this router.
    If you followed the advice in that FAQ, then I need more info from you:
    #1 Does your Linksys have offical Linksys firmware or third party firmware?
    #2 If the Linksys has third party firmware, which one?
    For example DD-WRT.
    #3 While I know your Linksys has a built in switch, do you have a switch that is not part of a router?
    #4 Do any of your computers have at least two NICs and one of the NICs is wired?
    #5 Do you know how to manually setup a Static IP on your computer?
    #6 What kind of connection does your Linksys handle?
    For a Verzion DSL connection, as far as I know - they only offer:
    a) PPPoE
    OR
    b) DHCP (before setting the modem combo not to handle the public IP by folllowing that FAQ, the modem combo was set to Bridge-Routed Bridge-DHCP Client Enabled)
    OR
    c) Static IP.
    #7 Does your Linksys have at least two RJ-45 LAN ports not occupied / not in use / nothing connected ?
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?

    Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?

    If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

  • Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Comcast just replaced my cable modem/wireless router.  All devices connect properly except my iPhone 4.  It shows itself to be connected to the network, but it does not load any web page.  Resetting the iPhone does not solve the problem.  Any suggestions?

    Thank you for your response.
    I had rebooted the router (several times, actually), to no avail.
    I do not know the answer to whether MAC filtering is enabled on the router.  Have tried to find info about that, but unsuccessfully.  Router is an Arris TG852G, supplied by Comcast.  I would be surprised if MAC filtering were the issue, since in addition to the computer, we have successfully connected several other devices to the wifi, namely an iPad, a Android phone and a Kindle Fire - all able to access internet pages through the wifi, and all without a need to add the device to a MAC address whitelist.  To add to the mystery, the Comcast tech was able to connect his iPhone 4 to my network and access web pages.  He was unable to connect my iPhone, however, after trying for some time.
    I seem to recall reading somewhere that an iPhone cannot connect to a wireless "n" router, only "b" or "g".  The Arris router is described as a n/g/b compliant router, and as noted the Comcast tech was able to connect his iPhone, so don't know why that would be the issue here.
    By the way, my iPhone does connect wirelessly to my network at home.  This difficulty is at a second home.
    Any other thoughts would be appreciated.

  • Firefox is slow to load and view pages and repeated "Firefox is not responding" message

    Firefox is quite slow to load and view pages with and I keep getting the "Firefox is not responding" message.
    I have the latest version, plus the latest Adobe Flash Player, Shockwave Player, etc.

    Note that Firefox 36 has been released officially.
    *https://www.mozilla.org/en-US/firefox/36.0/releasenotes/
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    I'm running iCloud on a Windows 7 PC. Photoes have been autmatically uploaded from my iPhone. However, the "Photoes" ICON does not load, and I receive an error message of a problem. Then the ICON disappears. How can I access my photoes?

    Same issue here,  previously did work perfectly

  • HR iViews are not getting displayed and showing "Page can not be found".

    Hello,
    I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
    We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
    I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
    #0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
    #1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
    #1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
    #1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
    #1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
    #1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
    Please let me know if anybody has come across such scenario before.
    Thanks
    Suhas
    Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

    Hi,
    This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
    Thanks
    Suhas

Maybe you are looking for