BRSCH Industry Key issue in MDG-S

Hi All,
We have added VEN_BRSCH field under Entity Type BP_VENGEN, and also maintained the SMT mapping for the same.
But the Value associated with the BRSCH is only visible in the stagging area and not able in the Active area ( Please note we have included this field under ERP Vendor and the create Supplier CR is approved and activated.)
PLease find attached the screen shot.
NOTE: MDG-S
Best Regards,
Athmaraman

Hi Athmaraman,
branches have to be maintained as "Industries" on the business partner level. CVI takes care of mapping the default industry of the default industry system to the vendor's BRSCH field. Adding the field to BP_VENGEN is neither supported nor recommended.
Best regards
Michael

Similar Messages

  • Tecra M10 - Stuck CTRL key issue -- perhaps to do with BIOS?

    Hello and thanks for reading.
    I recently switched my Tecra M10 to Windows 7 (from XP) and it soon developed the dreaded "stuck CTRL key" issue. This causes the keyboard to behave as if the CTRL key is permanently depressed. Sometimes hitting a combination of keys, or bringing up the onscreen keyboard, temporarily solves the issue, but then it returns.
    It seems to be an issue many people have, with no simple solution. I've looked at every thread about it I can find, and tried many things to do with drivers etc. without any success.
    So firstly, if anyone knows a remedy that works for this particular machine, I would be very grateful to learn it!
    Then, there are two things I've not yet done: update BIOS and disable pinch zoom.
    I was looking at the following BIOS update:
    http://www.toshiba-asia.com/sg/support/drivers/details/25244
    ... which is version 3.00 and seems to be most recent. My own version is 1.90.
    However version 3.00 is labelled "For PTMB0* ONLY". I don't know what this means or whether it applies to me. Can anyone help? Should I install this BIOS?
    For the pinch zoom, I've been told that disabling it does sometimes cure the CTRL problem -- but I can't find any pinch zoom facility on the M10. I suspect it simply doesn't have one. Is that right?
    Many thanks for any help you can give.

    Hi
    > I was looking at the following BIOS update. which is version 3.00 and seems to be most recent. My own version is 1.90.
    There are different Tecra M10 models on the market.
    Check the labels at the bottom of the unit. There you should find some numbers like for example PTMB0E-01K00LGR
    The first 6 characters are important: for example PTMB0E
    I assume your notebook belongs to European series.
    In such case you should check the Toshiba EU driver page for possible BIOS update.
    http://www.toshiba.eu/innovation/download_drivers_bios.jsp
    However, on Toshiba EU driver page you will find also the BIOS v3.0 for all European Tecra M10 units.
    Anyway, back to the CTRL button issue: guess what, you should connect an external USB keyboard and should check how the CTRL button acts.
    In case the USB keyboard would work properly, the CTRL button of internal keyboard is affected and you will need to replace the internal keyboard.
    PS: it could be possible that the option "sticky keys" has been enabled. To disable this function, you have to press SHIFT button 5 times in the row.

  • Windows 8 Key Issue

    Here's my problem.  Windows 8 came preinstalled on my computer; however, I accidently deleted the Windows 8 key from the bios and now Windows keeps asking me to enter the correct key.  Since there is no longer a sticker with the key included with the computer I have no way of finding the key.  Does HP keep a record of the keys tagged to the serial number?  Or am I just out of luck?
      I called HP Support about this and they told me to get the key off the CDs which were included with the computer.  When I told him there were no CDs, he said I had bought a used computer mascarading as new because all of their computers ship with Windows CDs.  When I disputed this he said that Microsoft could solve the issue for me.  Microsoft said that HP could solve it.  Can anyone help me?  I'd rather not spend money on buying Windows 8
    Thanks in advance,
    Mike
    This question was solved.
    View Solution.

    HP does not retain records of the keys issued .  HP also does not ship Windows CD's with the computers unless they were specifically ordered.  If you have somehow deleted the key then you are out of luck, sorry.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • T400 stuck key issue

    I bought my T400 2764-CTO in last December, and started using it on mini dock without any problem. Until recently, it starts to show stuck key issue randomly (not always failure) both at boot up or under Windows Vista.
    ERROR
    0210 Stuck Key FF
    Press <F1> to SetUp
    Note: the stuck key keeps changing, sometimes 13, sometimes 1F, sometimes other key.
    I opened the laptop, and checked the connection of the keyboard but couldn't locate any problem there. Can this be a keyboard issue? Or even a motherboard issue?
    Can Lenovo swap a new keyboard for me? If so, what do I need to do then? 
    Thanks!
    Best Regards  

    You can call Lenovo service, and log a service call, they will make the necessary arrangements. If you are not confident with bios update then please don't do it youself, and let the warranty department do it for you, as any mistakes can make your laptop useless and you will be paying couple hundreds of euros to get the motherboard replaced. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Repeating key issue

    I just moved to the Mac a couple of months ago. I love it and haven't looked back. However, today, I used my Mac twice. First, this morning, I didn't do anything unusual. I cleared out my trash, browsed a bit on the Internet and answered e-mail. Then I modeled some artwork. I shutdown my machine, shutdown my cable modem & router and went to work. When I came back at lunch nothing was wrong and I hardly did anything (Internet still wasn't on).
    However when I came home after work, I started the machine up and the hard drive icon kept popping up and it was difficult to use the menu because I had to hold down the mouse button instead of just click. It turns out that the space key is repeating spontaniously. I thought it might be the keyboard but it doesn't stop when I unplug the keyboard.
    Has anyone had this before? How do I cure it? Thanks.

    Hi Redspark,
    Did you arrive at any solution to your repeating key issue? I've recently joined the discussions forum because I'm having a similar problem - without having typed anything, my backslash spontaneously inserts itself into any text box available and starts repeating itself across the page. In the Finder, I also get various folders spontaneously highlighting themselves, if I pull down a finder menu, it flashes which makes it almost impossible to select anything. As well I get sudden outbursts of the error chime.
    Have done an Archive and Install, reset the PMU. I've also zapped the PRAM, checked my RAM slots, checked Permissions, etc.
    Let me know if you've got any further insights.
    Thanks.

  • Failure to install Arch Linux via netinstall AIF; PGP key issues

    Hello,
    I'm am attempting a fresh install Arch Linux on a clean machine: Dell 1420, 4GB RAM. I am using the archlinux-2012.02.09_04-00-01-netinstall-dual.iso installer.
    Installation progresses nicely through the package selection (I choose core, core-dev, xfce, and xorg packages only, to keep it simple for now). The packages download quickly, and then the installation fails during installation indicating that none of the PGP keys are known for any of the downloaded files. The process essentially aborts and I press 'Continue' returning me to the main menu. I have repeated this process several times.
    What needs to be done to install Arch Linux?
    Thanks.

    Hi,
    Thanks, I have been through the Beginners Guide. I just want to get Arch Linux to "start" with a very basic GUI. during one of my installation iterations I did install only 'core' files, but the same failure occurred. so I'm at a loss as to how to get even a basic installation to take hold. Thoughts on the pgp key issues?
    Thanks.
    Update: I've switched to using the default net installer (2011.08.19) and the installation succeeded!
    Last edited by zaleksf (2012-02-12 05:12:32)

  • Key issues involved while  technical upgrade of 4.6c to ecc 6

    Hi Guru's
      Will anyone share the key issues and time consuming activities involved  in  tech upgrade project from  4.6 c to ecc 6 at different stages.
      Mail  me [email protected]
      Reward full points for the answer
            Regards,
    Venkat

    Dear Venkatesh ,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Industry Key

    Hi, All,
    What means Industry Key in the vendor master data?
    How to use this? Where and when to use this functionality?
    Thanks,

    Dear,
    The Industry Key in Vendor Master - Control - Reference Data - used to assign a vendor under a specific Industry type i.e type of business.
    For Example:
    Bearing Vendors: FAG, SKF; HSBC - Banking; Raw material suppliers; Spare parts suppliers; Transport Vendors etc etc.
    This specification is useful for future evaluations, or obtain list of a specific industry type vendors.
    In simple, a distinct group of vendors with same nature of job OR basic nature of activity.
    Regards,
    Syed Hussain.

  • Process key issue in MM

    Hi All,
    I am working on 0PUR_C01 cube and theDS is 2lis_02_itm.i am facing a issue with the process key ,only process keys 2 and 3 are coming into the BI system even though process key 1 and others are also there in the source.
    i have maintained the BF 11 flag and industry sector in mcb_.
    please suggest.
    Thanks
    Sri

    Hi, i'm having the same problem. Can you give me some guidance in how you solved the problem?
    Thank you.
    GG

  • Satellite U400-15B hangs on Internet and Touch media keys issue

    Hi All,
    Had two issues with my U400-15B which I am hoping to resolve.
    1) The first issue is that I have noticed that my internet occasionally seems to hang on Internet Explorer when using website's which have a couple of images e.t.c.
    It will freeze but the rest of the laptop works fine - I mean you can go into the start menu and open other programs fine. However, if you open Microsoft Word while this is happening, it will take slightly longer to load up than normal. Does anyone know what this could be or how I can resolve this?
    I am using Vista Home Premium 32 bit and the laptop has 4GB of RAM / P7350 Intel Centrino 2 - so is pretty powerful.
    2) The second issue is that when I press the 'sound' touch key, the white lights and the white bar above the touchpad become unlit. When I press this again the lights come back on but it doesn't mute the sound. Only when the the laptop is put to sleep mode and then woken up again, does the key work correctly. All others work fine. Does anyone know whats causing this?
    I have exchanged this laptop 3 times now and all of them have done issue (2) this but surely this isn't normal.
    Any help or advice to rectify these issues is very much appreciated.
    Thanks

    > but the problem of when you press the sound mute touch key still turns the white lights off and the white bar on top of the mouse off - instead of muting the sound.
    Ive got U400 too and installed Win XP. When I press the first button near the power button then I can enable and disable the LEDs.
    To be honest this is not a problem!
    You can configure the Toshiba Control buttons.
    This can be done in the Toshiba Button Support Utility. And this tool can be found in Toshiba Assist -> Optimize -> Toshiba Button Support
    There you can chose the button (button name) and can assign the certain function.
    I think the mute.exe could be fund in Toshiba folder.

  • F110 Grouping Key Issue

    I have 3 open items for a vendor - 2 credit memos (with 1000 and 600 amounts ) and one invoice (with amount 600). In the current situation, these items are not offset against each other as they have different payment methods, payment supplement code etc etc. The only common factor between these items is the company code and the vendor number.
    And the current requirement is that, only these 2 fields - company code and vendor number need to be considered in offsetting the open items and all the other fields including the payment method etc should be ignored. So, after some research - I figured out that there is something called a grouping key that can be set in the configuration using transaction OBAP. I set the grouping key in OBAP. And this grouping key needs to be used in the vendor master screen for payments for that particular vendor so that all the other parameters will be overridden by this grouping key. FYI..I set this grouping key 02 to use only the vendor number.
    Technically.. SAP says this should work. They also say that if it does not work, go and generate the program RSZGR000  as this program contains the respective code to make the payment run program understand that the grouping key is the overriding factor. So, I generated this program too and made sure the code exists. This grouping key is populated in the structure ZHLG1-PAYGR and the payment run program is supposed to understand that this is the overriding field for offsetting the invoices against credit memos. I debugged the payment run proposal and saw that it is populating this field in the structure.
    So, I do all this and yet, my open items are not cleared using JUST the Company & vendor. It is still looking for the other fields like payment methods, supplment code etc.
    I was looking up at the note 164835 and found that for automatic payment transactions the following fields need to be same for the documents that are being offset with each other: Currency, Receiver, Payment Mthod in the Item and Bank Details in the item.
    I was assuming that once the grouping key is populated and used, all the other fields above should be ignored for offsetting.
    Any help in this matter would be appreciated!!

    I do not think that is the issue here. The issue here is that the payment methods are different for these invoices/cedit memos. One of the Credit Memo's has a blank payment method. So, the automatic payment program is not picking that document with blank payment method.
    Invoice 1 has payment method C
    Credit Memo 1 has payment method S
    Credit Memo 2has payment method as blank
    There is an option in the Automatic Payment Transactions screen where you enter the company code and payment methods. In the payment methods, we can enter multiple ones - so, I added S and C, but there is no way to tell the program to pick documents with blank payment methods too.
    That is why the Credit memo2 is left out and not settled with other documents.
    Please let me know if there is a way out for this.

  • Windows Server 2008 SP2 X86 Product Key Issue

    I am trying to create a VM using a Template, but facing an issue with respect to Product Key.  The VHD I am using is of
    Windows Server 2008 SP2 X86.  If I do not provide Product Key in the Template/Guest OS Profile, the Virtual Machine creation fails even before starting. Seeing this behavior, I added a dummy key to the Guest OS Profile/Template which allowed
    me to deploy the machine, but the VM gets stuck at Customization before failing. When I take the remote console of the VM, the Error I see at the Remote Console is:  
    Windows could not parse or process the unattend answer file for pass. The settings specified in the answer files cannot be applied. The error was detected while processing settings for component [microsoft-windows-shell-setup]"
    So, I am confused now what to do.
    Is dummy key supported?
    Do I need to provide the actual key in the Template/Guest OS Profile?

    You should be able to evaluate this software for 180 days.  
    Here are some info:
    http://portal.sivarajan.com/2010/10/windows-2008-r2-evaluation-period-and.html
    http://portal.sivarajan.com/2010/08/verify-and-extend-windows-2008.html
    Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
    Blogs - http://blogs.sivarajan.com/
    Articles - http://www.sivarajan.com/publications.html
    Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
    This posting is provided AS IS with no warranties, and confers no rights.

  • [Solved] Asus Zenbook Prime (UX31A-DB51) Function key issues

    I recently purchased this machine, and the final issue I have with is that the Function keys are not working. Looking at the wiki I saw that it should work out of the box with 3.4.4-2, and I'm on 3.4.5-1 and have issues with it. Following the instructions on building a patched module led to kernel panics.
    Thanks in advance for any help
    EDIT: dmesg output
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
    [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
    [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
    [ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
    [ 0.000000] BIOS-e820: 0000000040005000 - 00000000d97e5000 (usable)
    [ 0.000000] BIOS-e820: 00000000d97e5000 - 00000000d9de6000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000d9de6000 - 00000000d9de9000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9de9000 - 00000000d9dfe000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9dfe000 - 00000000d9e04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9e04000 - 00000000d9e06000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9e06000 - 00000000d9e0b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9e0b000 - 00000000d9f64000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9f64000 - 00000000d9f68000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9f68000 - 00000000d9fa7000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9fa7000 - 00000000d9fae000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9fae000 - 00000000d9fb0000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9fb0000 - 00000000d9fce000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9fce000 - 00000000d9fd1000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9fd1000 - 00000000d9fd3000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9fd3000 - 00000000d9fea000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9fea000 - 00000000d9ff0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9ff0000 - 00000000d9ff8000 (usable)
    [ 0.000000] BIOS-e820: 00000000d9ff8000 - 00000000d9ff9000 (reserved)
    [ 0.000000] BIOS-e820: 00000000d9ff9000 - 00000000da008000 (usable)
    [ 0.000000] BIOS-e820: 00000000da008000 - 00000000da009000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da009000 - 00000000da014000 (usable)
    [ 0.000000] BIOS-e820: 00000000da014000 - 00000000da019000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da019000 - 00000000da037000 (usable)
    [ 0.000000] BIOS-e820: 00000000da037000 - 00000000da039000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da039000 - 00000000da04d000 (usable)
    [ 0.000000] BIOS-e820: 00000000da04d000 - 00000000da04e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da04e000 - 00000000da060000 (usable)
    [ 0.000000] BIOS-e820: 00000000da060000 - 00000000da086000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da086000 - 00000000da09a000 (usable)
    [ 0.000000] BIOS-e820: 00000000da09a000 - 00000000da09b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da09b000 - 00000000da09c000 (usable)
    [ 0.000000] BIOS-e820: 00000000da09c000 - 00000000da09e000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da09e000 - 00000000da09f000 (usable)
    [ 0.000000] BIOS-e820: 00000000da09f000 - 00000000da0a4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da0a4000 - 00000000da0b9000 (usable)
    [ 0.000000] BIOS-e820: 00000000da0b9000 - 00000000da65d000 (reserved)
    [ 0.000000] BIOS-e820: 00000000da65d000 - 00000000da8dd000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000da8dd000 - 00000000da8e2000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000da8e2000 - 00000000da8e3000 (usable)
    [ 0.000000] BIOS-e820: 00000000da8e3000 - 00000000da926000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000da926000 - 00000000dad35000 (usable)
    [ 0.000000] BIOS-e820: 00000000dad35000 - 00000000daff4000 (reserved)
    [ 0.000000] BIOS-e820: 00000000daff4000 - 00000000db000000 (usable)
    [ 0.000000] BIOS-e820: 00000000dbc00000 - 00000000dfe00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 000000011f200000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xda8b0000 ACPI 2.0=0xda8b0000 SMBIOS=0xf04c0 MPS=0xfd4b0
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
    [ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
    [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
    [ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037556000) (371MB)
    [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037556000-0x0000000037aa3000) (5MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037aa3000-0x0000000040004000) (133MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000009accd000) (1452MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000009accd000-0x00000000ce792000) (826MB)
    [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ce792000-0x00000000ceac1000) (3MB)
    [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000ceac1000-0x00000000ceac5000) (0MB)
    [ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ceac5000-0x00000000ceace000) (0MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ceace000-0x00000000ceb65000) (0MB)
    [ 0.000000] efi: mem22: type=1, attr=0xf, range=[0x00000000ceb65000-0x00000000ceb83000) (0MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000ceb83000-0x00000000ceba1000) (0MB)
    [ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ceba1000-0x00000000cebf6000) (0MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000cebf6000-0x00000000cebfb000) (0MB)
    [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000cebfb000-0x00000000ced71000) (1MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ced71000-0x00000000ced79000) (0MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ced79000-0x00000000d90f9000) (163MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000d90f9000-0x00000000d97b2000) (6MB)
    [ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x00000000d97b2000-0x00000000d97bb000) (0MB)
    [ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x00000000d97bb000-0x00000000d97e5000) (0MB)
    [ 0.000000] efi: mem32: type=10, attr=0xf, range=[0x00000000d97e5000-0x00000000d9de6000) (6MB)
    [ 0.000000] efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000d9de6000-0x00000000d9de9000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000d9de9000-0x00000000d9dfe000) (0MB)
    [ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000d9dfe000-0x00000000d9e04000) (0MB)
    [ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000d9e04000-0x00000000d9e06000) (0MB)
    [ 0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000d9e06000-0x00000000d9e0b000) (0MB)
    [ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x00000000d9e0b000-0x00000000d9f64000) (1MB)
    [ 0.000000] efi: mem39: type=5, attr=0x800000000000000f, range=[0x00000000d9f64000-0x00000000d9f68000) (0MB)
    [ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000d9f68000-0x00000000d9fa7000) (0MB)
    [ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000d9fa7000-0x00000000d9fae000) (0MB)
    [ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000d9fae000-0x00000000d9fb0000) (0MB)
    [ 0.000000] efi: mem43: type=6, attr=0x800000000000000f, range=[0x00000000d9fb0000-0x00000000d9fbd000) (0MB)
    [ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000d9fbd000-0x00000000d9fce000) (0MB)
    [ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000d9fce000-0x00000000d9fd1000) (0MB)
    [ 0.000000] efi: mem46: type=5, attr=0x800000000000000f, range=[0x00000000d9fd1000-0x00000000d9fd3000) (0MB)
    [ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x00000000d9fd3000-0x00000000d9fea000) (0MB)
    [ 0.000000] efi: mem48: type=5, attr=0x800000000000000f, range=[0x00000000d9fea000-0x00000000d9ff0000) (0MB)
    [ 0.000000] efi: mem49: type=3, attr=0xf, range=[0x00000000d9ff0000-0x00000000d9ff8000) (0MB)
    [ 0.000000] efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000d9ff8000-0x00000000d9ff9000) (0MB)
    [ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x00000000d9ff9000-0x00000000da008000) (0MB)
    [ 0.000000] efi: mem52: type=5, attr=0x800000000000000f, range=[0x00000000da008000-0x00000000da009000) (0MB)
    [ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000da009000-0x00000000da014000) (0MB)
    [ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000da014000-0x00000000da019000) (0MB)
    [ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x00000000da019000-0x00000000da037000) (0MB)
    [ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000da037000-0x00000000da039000) (0MB)
    [ 0.000000] efi: mem57: type=3, attr=0xf, range=[0x00000000da039000-0x00000000da04d000) (0MB)
    [ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x00000000da04d000-0x00000000da04e000) (0MB)
    [ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x00000000da04e000-0x00000000da060000) (0MB)
    [ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000da060000-0x00000000da086000) (0MB)
    [ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x00000000da086000-0x00000000da09a000) (0MB)
    [ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x00000000da09a000-0x00000000da09b000) (0MB)
    [ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x00000000da09b000-0x00000000da09c000) (0MB)
    [ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x00000000da09c000-0x00000000da09e000) (0MB)
    [ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000da09e000-0x00000000da09f000) (0MB)
    [ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x00000000da09f000-0x00000000da0a4000) (0MB)
    [ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000da0a4000-0x00000000da0b9000) (0MB)
    [ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000da0b9000-0x00000000da119000) (0MB)
    [ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000da119000-0x00000000da133000) (0MB)
    [ 0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x00000000da133000-0x00000000da139000) (0MB)
    [ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000da139000-0x00000000da13e000) (0MB)
    [ 0.000000] efi: mem72: type=6, attr=0x800000000000000f, range=[0x00000000da13e000-0x00000000da140000) (0MB)
    [ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000da140000-0x00000000da15d000) (0MB)
    [ 0.000000] efi: mem74: type=0, attr=0xf, range=[0x00000000da15d000-0x00000000da28c000) (1MB)
    [ 0.000000] efi: mem75: type=0, attr=0xf, range=[0x00000000da28c000-0x00000000da5f2000) (3MB)
    [ 0.000000] efi: mem76: type=0, attr=0xf, range=[0x00000000da5f2000-0x00000000da5f8000) (0MB)
    [ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000da5f8000-0x00000000da65d000) (0MB)
    [ 0.000000] efi: mem78: type=10, attr=0xf, range=[0x00000000da65d000-0x00000000da72b000) (0MB)
    [ 0.000000] efi: mem79: type=10, attr=0xf, range=[0x00000000da72b000-0x00000000da8c7000) (1MB)
    [ 0.000000] efi: mem80: type=10, attr=0xf, range=[0x00000000da8c7000-0x00000000da8c9000) (0MB)
    [ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000da8c9000-0x00000000da8dd000) (0MB)
    [ 0.000000] efi: mem82: type=9, attr=0xf, range=[0x00000000da8dd000-0x00000000da8e1000) (0MB)
    [ 0.000000] efi: mem83: type=9, attr=0xf, range=[0x00000000da8e1000-0x00000000da8e2000) (0MB)
    [ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x00000000da8e2000-0x00000000da8e3000) (0MB)
    [ 0.000000] efi: mem85: type=10, attr=0xf, range=[0x00000000da8e3000-0x00000000da926000) (0MB)
    [ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x00000000da926000-0x00000000daa70000) (1MB)
    [ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x00000000daa70000-0x00000000dad06000) (2MB)
    [ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x00000000dad06000-0x00000000dad0b000) (0MB)
    [ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x00000000dad0b000-0x00000000dad0f000) (0MB)
    [ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x00000000dad0f000-0x00000000dad1c000) (0MB)
    [ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x00000000dad1c000-0x00000000dad2e000) (0MB)
    [ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x00000000dad2e000-0x00000000dad35000) (0MB)
    [ 0.000000] efi: mem93: type=6, attr=0x800000000000000f, range=[0x00000000dad35000-0x00000000daff4000) (2MB)
    [ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x00000000daff4000-0x00000000db000000) (0MB)
    [ 0.000000] efi: mem95: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f200000) (498MB)
    [ 0.000000] efi: mem96: type=0, attr=0x8000000000000000, range=[0x00000000dbc00000-0x00000000dfe00000) (66MB)
    [ 0.000000] efi: mem97: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem98: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem99: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.204 05/09/2012
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x11f200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FE0000000 write-back
    [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0DBC00000 mask FFFC00000 uncachable
    [ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
    [ 0.000000] 6 base 11F400000 mask FFFC00000 uncachable
    [ 0.000000] 7 base 11F200000 mask FFFE00000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000dbc00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fd780] fd780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
    [ 0.000000] 0000000000 - 00db000000 page 2M
    [ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000011f200000
    [ 0.000000] 0100000000 - 011f200000 page 2M
    [ 0.000000] kernel direct mapping tables up to 11f200000 @ d97b5000-d97bb000
    [ 0.000000] RAMDISK: 37556000 - 37aa3000
    [ 0.000000] ACPI: RSDP 00000000da8b0000 00024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 00000000da8b0090 0009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000da8c2058 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000da8b01c0 11E96 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000da8daf80 00040
    [ 0.000000] ACPI: APIC 00000000da8c2150 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000da8c21c8 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 00000000da8c2210 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 00000000da8c22d8 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000da8c2318 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000da8c2d58 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000da8c3a00 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000da8c3a98 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000da8c43b8 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
    [ 0.000000] ACPI: HPET 00000000da8c4530 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000da8c4568 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000da8c4df0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000da8c5888 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: BGRT 00000000da8c5940 00038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000011f200000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000011f200000
    [ 0.000000] NODE_DATA [000000011f1fc000 - 000000011f1fffff]
    [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a800000-ffff88011e7fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0011f200
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x00020000
    [ 0.000000] 0: 0x00020200 -> 0x00040004
    [ 0.000000] 0: 0x00040005 -> 0x000d97e5
    [ 0.000000] 0: 0x000d9de9 -> 0x000d9dfe
    [ 0.000000] 0: 0x000d9e04 -> 0x000d9e06
    [ 0.000000] 0: 0x000d9e0b -> 0x000d9f64
    [ 0.000000] 0: 0x000d9f68 -> 0x000d9fa7
    [ 0.000000] 0: 0x000d9fae -> 0x000d9fb0
    [ 0.000000] 0: 0x000d9fce -> 0x000d9fd1
    [ 0.000000] 0: 0x000d9fd3 -> 0x000d9fea
    [ 0.000000] 0: 0x000d9ff0 -> 0x000d9ff8
    [ 0.000000] 0: 0x000d9ff9 -> 0x000da008
    [ 0.000000] 0: 0x000da009 -> 0x000da014
    [ 0.000000] 0: 0x000da019 -> 0x000da037
    [ 0.000000] 0: 0x000da039 -> 0x000da04d
    [ 0.000000] 0: 0x000da04e -> 0x000da060
    [ 0.000000] 0: 0x000da086 -> 0x000da09a
    [ 0.000000] 0: 0x000da09b -> 0x000da09c
    [ 0.000000] 0: 0x000da09e -> 0x000da09f
    [ 0.000000] 0: 0x000da0a4 -> 0x000da0b9
    [ 0.000000] 0: 0x000da8e2 -> 0x000da8e3
    [ 0.000000] 0: 0x000da926 -> 0x000dad35
    [ 0.000000] 0: 0x000daff4 -> 0x000db000
    [ 0.000000] 0: 0x00100000 -> 0x0011f200
    [ 0.000000] On node 0 totalpages: 1019371
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 11 pages reserved
    [ 0.000000] DMA zone: 3908 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 871580 pages, LIFO batch:31
    [ 0.000000] Normal zone: 1992 pages used for memmap
    [ 0.000000] Normal zone: 125496 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
    [ 0.000000] PM: Registered nosave memory: 00000000d97e5000 - 00000000d9de6000
    [ 0.000000] PM: Registered nosave memory: 00000000d9de6000 - 00000000d9de9000
    [ 0.000000] PM: Registered nosave memory: 00000000d9dfe000 - 00000000d9e04000
    [ 0.000000] PM: Registered nosave memory: 00000000d9e06000 - 00000000d9e0b000
    [ 0.000000] PM: Registered nosave memory: 00000000d9f64000 - 00000000d9f68000
    [ 0.000000] PM: Registered nosave memory: 00000000d9fa7000 - 00000000d9fae000
    [ 0.000000] PM: Registered nosave memory: 00000000d9fb0000 - 00000000d9fce000
    [ 0.000000] PM: Registered nosave memory: 00000000d9fd1000 - 00000000d9fd3000
    [ 0.000000] PM: Registered nosave memory: 00000000d9fea000 - 00000000d9ff0000
    [ 0.000000] PM: Registered nosave memory: 00000000d9ff8000 - 00000000d9ff9000
    [ 0.000000] PM: Registered nosave memory: 00000000da008000 - 00000000da009000
    [ 0.000000] PM: Registered nosave memory: 00000000da014000 - 00000000da019000
    [ 0.000000] PM: Registered nosave memory: 00000000da037000 - 00000000da039000
    [ 0.000000] PM: Registered nosave memory: 00000000da04d000 - 00000000da04e000
    [ 0.000000] PM: Registered nosave memory: 00000000da060000 - 00000000da086000
    [ 0.000000] PM: Registered nosave memory: 00000000da09a000 - 00000000da09b000
    [ 0.000000] PM: Registered nosave memory: 00000000da09c000 - 00000000da09e000
    [ 0.000000] PM: Registered nosave memory: 00000000da09f000 - 00000000da0a4000
    [ 0.000000] PM: Registered nosave memory: 00000000da0b9000 - 00000000da65d000
    [ 0.000000] PM: Registered nosave memory: 00000000da65d000 - 00000000da8dd000
    [ 0.000000] PM: Registered nosave memory: 00000000da8dd000 - 00000000da8e2000
    [ 0.000000] PM: Registered nosave memory: 00000000da8e3000 - 00000000da926000
    [ 0.000000] PM: Registered nosave memory: 00000000dad35000 - 00000000daff4000
    [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dbc00000
    [ 0.000000] PM: Registered nosave memory: 00000000dbc00000 - 00000000dfe00000
    [ 0.000000] PM: Registered nosave memory: 00000000dfe00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at dfe00000 (gap: dfe00000:18200000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ee00000 s82880 r8192 d23616 u524288
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000984
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3749436k/4704256k available (4538k kernel code, 626772k absent, 328048k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] Detected 1696.065 MHz processor.
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.46 BogoMIPS (lpj=5653550)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000027] init_memory_mapping: 00000000dbc00000-00000000dfe00000
    [ 0.000031] 00dbc00000 - 00dfe00000 page 2M
    [ 0.151052] Security Framework initialized
    [ 0.151060] AppArmor: AppArmor disabled by boot time parameter
    [ 0.151411] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.152933] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.153609] Mount-cache hash table entries: 256
    [ 0.153820] Initializing cgroup subsys cpuacct
    [ 0.153823] Initializing cgroup subsys memory
    [ 0.153832] Initializing cgroup subsys devices
    [ 0.153834] Initializing cgroup subsys freezer
    [ 0.153836] Initializing cgroup subsys net_cls
    [ 0.153838] Initializing cgroup subsys blkio
    [ 0.153874] CPU: Physical Processor ID: 0
    [ 0.153875] CPU: Processor Core ID: 0
    [ 0.153882] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.153883] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.154440] mce: CPU supports 7 MCE banks
    [ 0.154456] CPU0: Thermal monitoring enabled (TM1)
    [ 0.154464] using mwait in idle threads.
    [ 0.155854] ACPI: Core revision 20120320
    [ 0.172956] ftrace: allocating 17824 entries in 70 pages
    [ 0.186631] DMAR: Host address width 36
    [ 0.186634] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.186647] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.186650] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.186661] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.186663] DMAR: RMRR base: 0x000000da3af000 end: 0x000000da3cbfff
    [ 0.186666] DMAR: RMRR base: 0x000000dbc00000 end: 0x000000dfdfffff
    [ 0.186743] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.186745] HPET id 0 under DRHD base 0xfed91000
    [ 0.186954] Enabled IRQ remapping in x2apic mode
    [ 0.186956] Enabling x2apic
    [ 0.186958] Enabled x2apic
    [ 0.186967] Switched APIC routing to cluster x2apic.
    [ 0.187451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.220416] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
    [ 0.324902] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
    [ 0.324909] ... version: 3
    [ 0.324910] ... bit width: 48
    [ 0.324912] ... generic registers: 4
    [ 0.324914] ... value mask: 0000ffffffffffff
    [ 0.324916] ... max period: 000000007fffffff
    [ 0.324917] ... fixed-purpose events: 3
    [ 0.324919] ... event mask: 000000070000000f
    [ 0.344968] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.364889] Booting Node 0, Processors #1
    [ 0.378630] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.391536] #2
    [ 0.405332] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.418168] #3 Ok.
    [ 0.431901] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.431937] Brought up 4 CPUs
    [ 0.431939] Total of 4 processors activated (13573.87 BogoMIPS).
    [ 0.436493] devtmpfs: initialized
    [ 0.437768] PM: Registering ACPI NVS region [mem 0xd97e5000-0xd9de5fff] (6295552 bytes)
    [ 0.437873] PM: Registering ACPI NVS region [mem 0xda65d000-0xda8dcfff] (2621440 bytes)
    [ 0.437918] PM: Registering ACPI NVS region [mem 0xda8e3000-0xda925fff] (274432 bytes)
    [ 0.438826] NET: Registered protocol family 16
    [ 0.438966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.438969] ACPI: bus type pci registered
    [ 0.439040] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.439044] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.488460] PCI: Using configuration type 1 for base access
    [ 0.489097] bio: create slab <bio-0> at 0
    [ 0.489161] ACPI: Added _OSI(Module Device)
    [ 0.489163] ACPI: Added _OSI(Processor Device)
    [ 0.489165] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.489168] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.492211] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.495384] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.500091] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.500635] ACPI: SSDT 00000000da60a018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.501405] ACPI: Dynamic OEM Table Load:
    [ 0.501409] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.501770] ACPI: SSDT 00000000da60ba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.502576] ACPI: Dynamic OEM Table Load:
    [ 0.502579] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.502752] ACPI: SSDT 00000000da60cc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.503510] ACPI: Dynamic OEM Table Load:
    [ 0.503513] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.504368] ACPI: Interpreter enabled
    [ 0.504373] ACPI: (supports S0 S3 S4 S5)
    [ 0.504406] ACPI: Using IOAPIC for interrupt routing
    [ 0.512510] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.512789] ACPI: No dock devices found.
    [ 0.512794] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.513213] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.513809] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.513812] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.513815] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.513818] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.513821] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.513823] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.513826] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.513829] pci_root PNP0A08:00: host bridge window [mem 0xdfe00000-0xfeafffff]
    [ 0.513867] PCI host bridge to bus 0000:00
    [ 0.513870] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.513873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.513875] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.513878] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.513880] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.513883] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.513885] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.513888] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
    [ 0.513899] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.513952] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.513968] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 0.513977] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.513985] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.514032] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
    [ 0.514046] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.514135] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.514163] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
    [ 0.514257] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.514289] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.514320] pci 0000:00:16.0: reg 10: [mem 0xf7d22000-0xf7d2200f 64bit]
    [ 0.514413] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.514463] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.514489] pci 0000:00:1a.0: reg 10: [mem 0xf7d20000-0xf7d203ff]
    [ 0.514599] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.514632] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.514654] pci 0000:00:1b.0: reg 10: [mem 0xf7d18000-0xf7d1bfff 64bit]
    [ 0.514739] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.514775] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.514909] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.514948] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.515082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.515141] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.515168] pci 0000:00:1d.0: reg 10: [mem 0xf7d1f000-0xf7d1f3ff]
    [ 0.515282] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.515316] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.515466] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.515490] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.515500] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.515512] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.515522] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.515532] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.515542] pci 0000:00:1f.2: reg 24: [mem 0xf7d1e000-0xf7d1e7ff]
    [ 0.515605] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.515629] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.515651] pci 0000:00:1f.3: reg 10: [mem 0xf7d1d000-0xf7d1d0ff 64bit]
    [ 0.515682] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.515732] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
    [ 0.515758] pci 0000:00:1f.6: reg 10: [mem 0xf7d1c000-0xf7d1cfff 64bit]
    [ 0.515922] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.516173] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
    [ 0.516366] pci 0000:02:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 0.517198] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.521918] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.521928] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.521957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.522122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.522161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.522339] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.522604] pci0000:00: ACPI _OSC control (0x18) granted
    [ 0.528361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 0.528420] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
    [ 0.528480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 0.528531] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
    [ 0.528584] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.528635] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.528687] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
    [ 0.528737] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 0.528831] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.528838] vgaarb: loaded
    [ 0.528839] vgaarb: bridge control possible 0000:00:02.0
    [ 0.528883] PCI: Using ACPI for IRQ routing
    [ 0.530787] PCI: pci_cache_line_size set to 64 bytes
    [ 0.530797] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
    [ 0.530873] reserve RAM buffer: 000000000009f000 - 000000000009ffff
    [ 0.530876] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
    [ 0.530879] reserve RAM buffer: 00000000d97e5000 - 00000000dbffffff
    [ 0.530891] reserve RAM buffer: 00000000d9dfe000 - 00000000dbffffff
    [ 0.530903] reserve RAM buffer: 00000000d9e06000 - 00000000dbffffff
    [ 0.530914] reserve RAM buffer: 00000000d9f64000 - 00000000dbffffff
    [ 0.530925] reserve RAM buffer: 00000000d9fa7000 - 00000000dbffffff
    [ 0.530936] reserve RAM buffer: 00000000d9fb0000 - 00000000dbffffff
    [ 0.530946] reserve RAM buffer: 00000000d9fd1000 - 00000000dbffffff
    [ 0.530956] reserve RAM buffer: 00000000d9fea000 - 00000000dbffffff
    [ 0.530966] reserve RAM buffer: 00000000d9ff8000 - 00000000dbffffff
    [ 0.530975] reserve RAM buffer: 00000000da008000 - 00000000dbffffff
    [ 0.530984] reserve RAM buffer: 00000000da014000 - 00000000dbffffff
    [ 0.530993] reserve RAM buffer: 00000000da037000 - 00000000dbffffff
    [ 0.531001] reserve RAM buffer: 00000000da04d000 - 00000000dbffffff
    [ 0.531008] reserve RAM buffer: 00000000da060000 - 00000000dbffffff
    [ 0.531015] reserve RAM buffer: 00000000da09a000 - 00000000dbffffff
    [ 0.531022] reserve RAM buffer: 00000000da09c000 - 00000000dbffffff
    [ 0.531028] reserve RAM buffer: 00000000da09f000 - 00000000dbffffff
    [ 0.531033] reserve RAM buffer: 00000000da0b9000 - 00000000dbffffff
    [ 0.531038] reserve RAM buffer: 00000000da8e3000 - 00000000dbffffff
    [ 0.531042] reserve RAM buffer: 00000000dad35000 - 00000000dbffffff
    [ 0.531045] reserve RAM buffer: 00000000db000000 - 00000000dbffffff
    [ 0.531048] reserve RAM buffer: 000000011f200000 - 000000011fffffff
    [ 0.531151] NetLabel: Initializing
    [ 0.531153] NetLabel: domain hash size = 128
    [ 0.531155] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.531169] NetLabel: unlabeled traffic allowed by default
    [ 0.531194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.531202] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.533219] Switching to clocksource hpet
    [ 0.539356] pnp: PnP ACPI init
    [ 0.539371] ACPI: bus type pnp registered
    [ 0.539727] pnp 00:00: [bus 00-3e]
    [ 0.539735] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.539737] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.539739] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.539742] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.539744] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.539747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.539749] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.539751] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.539754] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.539756] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.539759] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.539761] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.539763] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.539766] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.539768] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.539770] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.539773] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.539775] pnp 00:00: [mem 0xdfe00000-0xfeafffff window]
    [ 0.539777] pnp 00:00: [mem 0x00010000-0x0001ffff window]
    [ 0.539852] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.539883] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.539934] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.539938] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.540008] pnp 00:02: [io 0x0000-0x001f]
    [ 0.540010] pnp 00:02: [io 0x0081-0x0091]
    [ 0.540012] pnp 00:02: [io 0x0093-0x009f]
    [ 0.540014] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.540016] pnp 00:02: [dma 4]
    [ 0.540049] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.540058] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 0.540087] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.540186] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.540219] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.540233] pnp 00:05: [io 0x002e-0x002f]
    [ 0.540235] pnp 00:05: [io 0x004e-0x004f]
    [ 0.540237] pnp 00:05: [io 0x0061]
    [ 0.540239] pnp 00:05: [io 0x0063]
    [ 0.540241] pnp 00:05: [io 0x0065]
    [ 0.540243] pnp 00:05: [io 0x0067]
    [ 0.540245] pnp 00:05: [io 0x0070]
    [ 0.540246] pnp 00:05: [io 0x0080]
    [ 0.540248] pnp 00:05: [io 0x0092]
    [ 0.540250] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.540252] pnp 00:05: [io 0x0680-0x069f]
    [ 0.540254] pnp 00:05: [io 0x0200-0x020f]
    [ 0.540256] pnp 00:05: [io 0xffff]
    [ 0.540258] pnp 00:05: [io 0xffff]
    [ 0.540260] pnp 00:05: [io 0x0400-0x0453]
    [ 0.540264] pnp 00:05: [io 0x0458-0x047f]
    [ 0.540266] pnp 00:05: [io 0x0500-0x057f]
    [ 0.540268] pnp 00:05: [io 0x164e-0x164f]
    [ 0.540315] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.540318] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 0.540320] system 00:05: [io 0xffff] has been reserved
    [ 0.540323] system 00:05: [io 0xffff] has been reserved
    [ 0.540326] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 0.540328] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.540331] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.540334] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.540338] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.540348] pnp 00:06: [io 0x0070-0x0077]
    [ 0.540362] pnp 00:06: [irq 8]
    [ 0.540395] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.540427] pnp 00:07: [io 0x0454-0x0457]
    [ 0.540471] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 0.540474] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.540502] pnp 00:08: [io 0x0010-0x001f]
    [ 0.540504] pnp 00:08: [io 0x0022-0x003f]
    [ 0.540506] pnp 00:08: [io 0x0044-0x005f]
    [ 0.540508] pnp 00:08: [io 0x0072-0x007f]
    [ 0.540510] pnp 00:08: [io 0x0080]
    [ 0.540512] pnp 00:08: [io 0x0084-0x0086]
    [ 0.540514] pnp 00:08: [io 0x0088]
    [ 0.540516] pnp 00:08: [io 0x008c-0x008e]
    [ 0.540518] pnp 00:08: [io 0x0090-0x009f]
    [ 0.540520] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.540522] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.540524] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.540571] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.540575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.540584] pnp 00:09: [io 0x00f0-0x00ff]
    [ 0.540593] pnp 00:09: [irq 13]
    [ 0.540627] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.540680] pnp 00:0a: [irq 12]
    [ 0.540716] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.540743] pnp 00:0b: [io 0x0060]
    [ 0.540745] pnp 00:0b: [io 0x0064]
    [ 0.540752] pnp 00:0b: [irq 1]
    [ 0.540788] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.541018] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 0.541020] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 0.541022] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 0.541024] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 0.541027] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 0.541029] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 0.541031] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 0.541033] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 0.541035] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 0.541038] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 0.541040] pnp 00:0c: [mem 0xdfe00000-0xdfe00fff]
    [ 0.541103] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.541106] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.541109] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.541112] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.541116] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.541119] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.541122] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.541125] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.541128] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.541131] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.541134] system 00:0c: [mem 0xdfe00000-0xdfe00fff] has been reserved
    [ 0.541138] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.541211] pnp 00:0d: [mem 0xdfe00000-0xdfe00fff]
    [ 0.541274] system 00:0d: [mem 0xdfe00000-0xdfe00fff] has been reserved
    [ 0.541278] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.541430] pnp 00:0e: [mem 0x20000000-0x201fffff]
    [ 0.541433] pnp 00:0e: [mem 0x40004000-0x40004fff]
    [ 0.541495] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.541497] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.541501] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.541534] pnp: PnP ACPI: found 15 devices
    [ 0.541536] ACPI: ACPI bus type pnp unregistered
    [ 0.548333] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfe08000-0xdfe0ffff 64bit]
    [ 0.548340] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.548357] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.548364] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.548408] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.548411] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.548413] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.548416] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.548418] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.548421] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.548424] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.548426] pci_bus 0000:00: resource 11 [mem 0xdfe00000-0xfeafffff]
    [ 0.548429] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 0.548474] NET: Registered protocol family 2
    [ 0.548608] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.549403] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.550900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.551049] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.551052] TCP: reno registered
    [ 0.551067] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.551086] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.551175] NET: Registered protocol family 1
    [ 0.551191] pci 0000:00:02.0: Boot video device
    [ 0.586597] PCI: CLS 64 bytes, default 64
    [ 0.586642] Unpacking initramfs...
    [ 0.718182] Freeing initrd memory: 5428k freed
    [ 0.718943] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.718947] Placing 64MB software IO TLB between ffff8800ca792000 - ffff8800ce792000
    [ 0.718950] software IO TLB at phys 0xca792000 - 0xce792000
    [ 0.719520] audit: initializing netlink socket (disabled)
    [ 0.719531] type=2000 audit(1342675392.609:1): initialized
    [ 0.719886] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.721809] VFS: Disk quotas dquot_6.5.2
    [ 0.721861] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.721987] msgmni has been set to 7684
    [ 0.722183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.722218] io scheduler noop registered (default)
    [ 0.722221] io scheduler deadline registered
    [ 0.722279] io scheduler cfq registered
    [ 0.722575] efifb: probing for efifb
    [ 0.725055] efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
    [ 0.725058] efifb: mode is 1024x768x32, linelength=4096, pages=1
    [ 0.725060] efifb: scrolling: redraw
    [ 0.725063] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.727405] Console: switching to colour frame buffer device 128x48
    [ 0.729621] fb0: EFI VGA frame buffer device
    [ 0.729628] intel_idle: does not run on family 6 model 58
    [ 0.729660] GHES: HEST is not enabled!
    [ 0.729740] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.730316] Linux agpgart interface v0.103
    [ 0.730401] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.732007] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.732785] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.732815] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.732839] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.732863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.732884] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.732989] mousedev: PS/2 mouse device common for all mice
    [ 0.733073] rtc_cmos 00:06: RTC can wake from S4
    [ 0.733238] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.733268] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.733278] cpuidle: using governor ladder
    [ 0.733280] cpuidle: using governor menu
    [ 0.733411] TCP: cubic registered
    [ 0.733520] NET: Registered protocol family 10
    [ 0.733728] NET: Registered protocol family 17
    [ 0.733733] Registering the dns_resolver key type
    [ 0.733877] PM: Hibernation image not present or could not be loaded.
    [ 0.733883] registered taskstats version 1
    [ 0.734299] rtc_cmos 00:06: setting system clock to 2012-07-19 05:23:13 UTC (1342675393)
    [ 0.734449] Initializing network drop monitor service
    [ 0.736068] Freeing unused kernel memory: 740k freed
    [ 0.736186] Write protecting the kernel read-only data: 8192k
    [ 0.741922] Freeing unused kernel memory: 1588k freed
    [ 0.744508] Freeing unused kernel memory: 640k freed
    [ 0.752904] systemd-udevd[48]: starting version 186
    [ 0.755540] SCSI subsystem initialized
    [ 0.757022] libata version 3.00 loaded.
    [ 0.757753] ahci 0000:00:1f.2: version 3.0
    [ 0.757857] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 0.757916] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
    [ 0.757920] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 0.757927] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.760754] scsi0 : ahci
    [ 0.760973] scsi1 : ahci
    [ 0.761219] scsi2 : ahci
    [ 0.761696] scsi3 : ahci
    [ 0.761814] scsi4 : ahci
    [ 0.762047] scsi5 : ahci
    [ 0.762660] ata1: SATA max UDMA/133 abar m2048@0xf7d1e000 port 0xf7d1e100 irq 42
    [ 0.762664] ata2: DUMMY
    [ 0.762665] ata3: DUMMY
    [ 0.762667] ata4: DUMMY
    [ 0.762668] ata5: DUMMY
    [ 0.762670] ata6: DUMMY
    [ 0.766691] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.079319] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.090674] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.090818] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.090822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.101189] ata1.00: ATA-8: ADATA XM11 128GB, 5.0.1, max UDMA/133
    [ 1.101208] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.110592] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.110759] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.110763] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.121163] ata1.00: configured for UDMA/133
    [ 1.121291] scsi 0:0:0:0: Direct-Access ATA ADATA XM11 128GB 5.0. PQ: 0 ANSI: 5
    [ 1.123017] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 1.123090] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.123095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.123119] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.123778] usbcore: registered new interface driver usbfs
    [ 1.123805] usbcore: registered new interface driver hub
    [ 1.123854] usbcore: registered new device driver usb
    [ 1.124316] sda: sda1 sda2 sda3
    [ 1.124612] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.125369] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 1.125376] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.125423] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 1.125529] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.125550] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d00000
    [ 1.125619] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.125765] xHCI xhci_add_endpoint called for root hub
    [ 1.125769] xHCI xhci_check_bandwidth called for root hub
    [ 1.125819] hub 1-0:1.0: USB hub found
    [ 1.125832] hub 1-0:1.0: 4 ports detected
    [ 1.126030] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.126038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 1.126165] xHCI xhci_add_endpoint called for root hub
    [ 1.126169] xHCI xhci_check_bandwidth called for root hub
    [ 1.126239] hub 2-0:1.0: USB hub found
    [ 1.126251] hub 2-0:1.0: 4 ports detected
    [ 1.129851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.129926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.129933] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.129954] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.129988] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.133867] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.133883] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d20000
    [ 1.142574] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.142727] hub 3-0:1.0: USB hub found
    [ 1.142731] hub 3-0:1.0: 2 ports detected
    [ 1.142859] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.142866] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.142879] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 1.142914] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.146795] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.146814] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d1f000
    [ 1.155902] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.156064] hub 4-0:1.0: USB hub found
    [ 1.156069] hub 4-0:1.0: 2 ports detected
    [ 1.161829] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
    [ 1.162274] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.164964] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 1.165093] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [ 1.167496] [drm] Initialized drm 1.1.0 20060810
    [ 1.168381] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 1.179358] ACPI: Lid Switch [LID]
    [ 1.179416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.179422] ACPI: Power Button [PWRB]
    [ 1.179469] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 1.179474] ACPI: Sleep Button [SLPB]
    [ 1.183098] i915 0000:00:02.0: setting latency timer to 64
    [ 1.398826] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
    [ 1.398830] [drm] MTRR allocation failed. Graphics performance may suffer.
    [ 1.399105] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 1.399167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.399169] [drm] Driver supports precise vblank timestamp query.
    [ 1.399738] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.482168] usb 1-2: new high-speed USB device number 2 using xhci_hcd
    [ 1.499154] usb 1-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 1.499163] usb 1-2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 1.605348] usb 3-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.718541] Refined TSC clocksource calibration: 1696.146 MHz.
    [ 1.718545] Switching to clocksource tsc
    [ 1.729014] hub 3-1:1.0: USB hub found
    [ 1.729085] hub 3-1:1.0: 6 ports detected
    [ 1.835066] usb 4-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.958735] hub 4-1:1.0: USB hub found
    [ 1.958810] hub 4-1:1.0: 6 ports detected
    [ 2.025002] usb 3-1.2: new high-speed USB device number 3 using ehci_hcd
    [ 2.224762] usb 4-1.5: new high-speed USB device number 3 using ehci_hcd
    [ 2.474462] usb 4-1.6: new full-speed USB device number 4 using ehci_hcd
    [ 2.667462] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 3.173881] checking generic (e0000000 300000) vs hw (e0000000 10000000)
    [ 3.173885] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
    [ 3.173902] Console: switching to colour dummy device 80x25
    [ 3.175315] fbcon: inteldrmfb (fb0) is primary device
    [ 4.162812] Console: switching to colour frame buffer device 240x67
    [ 4.168648] fb0: inteldrmfb frame buffer device
    [ 4.168650] drm: registered panic notifier
    [ 4.170494] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
    [ 4.170803] acpi device:35: registered as cooling_device0
    [ 4.171244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
    [ 4.171252] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 4.171274] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 4.261463] device-mapper: uevent: version 1.0.3
    [ 4.261618] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
    [ 7.530172] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.671884] systemd-udevd[206]: starting version 186
    [ 7.701027] ACPI: Requesting acpi_cpufreq
    [ 7.708519] Monitor-Mwait will be used to enter C-1 state
    [ 7.708550] Monitor-Mwait will be used to enter C-2 state
    [ 7.708563] ACPI: acpi_idle registered with cpuidle
    [ 7.765552] ACPI: AC Adapter [AC0] (on-line)
    [ 7.792019] ACPI: Battery Slot [BAT0] (battery present)
    [ 7.842020] wmi: Mapper loaded
    [ 7.849215] thermal LNXTHERM:00: registered as thermal_zone0
    [ 7.849223] ACPI: Thermal Zone [THRM] (54 C)
    [ 7.856172] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 7.856873] mei 0000:00:16.0: setting latency timer to 64
    [ 7.857061] mei 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 7.867562] iTCO_vendor_support: vendor-support=0
    [ 7.870231] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 7.870413] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 7.878227] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 7.880017] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.887026] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \SMB0 1 (20120320/utaddress-251)
    [ 7.887035] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20120320/utaddress-251)
    [ 7.887041] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.890845] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 7.895102] usbcore: registered new interface driver uas
    [ 7.897297] Initializing USB Mass Storage driver...
    [ 7.897383] scsi6 : usb-storage 1-2:1.0
    [ 7.897494] usbcore: registered new interface driver usb-storage
    [ 7.897496] USB Mass Storage support registered.
    [ 7.905414] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 7.908378] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 7.908380] Copyright(c) 2003-2012 Intel Corporation
    [ 7.908463] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
    [ 7.908465] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900040c8000
    [ 7.908467] iwlwifi 0000:02:00.0: HW Revision ID = 0x24
    [ 7.908564] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 7.909834] Linux media interface: v0.10
    [ 7.912145] Linux video capture interface: v2.00
    [ 7.912309] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
    [ 7.916365] scsi7 : SCSI emulation for RTS5139 USB card reader
    [ 7.924679] scsi 7:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
    [ 7.926600] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b330)
    [ 7.927768] sd 7:0:0:0: [sdb] Attached SCSI removable disk
    [ 7.927991] Bluetooth: Core ver 2.16
    [ 7.928007] NET: Registered protocol family 31
    [ 7.928009] Bluetooth: HCI device and connection manager initialized
    [ 7.928012] Bluetooth: HCI socket layer initialized
    [ 7.928014] Bluetooth: L2CAP socket layer initialized
    [ 7.928025] Bluetooth: SCO socket layer initialized
    [ 7.929593] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
    [ 7.930401] usbcore: registered new interface driver rts5139
    [ 7.932134] usbcore: registered new interface driver btusb
    [ 7.938575] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input6
    [ 7.939734] usbcore: registered new interface driver uvcvideo
    [ 7.939737] USB Video Class driver (1.1.1)
    [ 7.959022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 7.960155] asus_wmi: ASUS WMI generic driver loaded
    [ 7.961792] asus_wmi: Initialization: 0x1
    [ 7.961840] asus_wmi: BIOS WMI version: 7.9
    [ 7.962148] asus_wmi: SFUN value: 0x4a2877
    [ 7.963015] asus_wmi: Can't find DSTS
    [ 7.968179] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
    [ 7.968413] iwlwifi 0000:02:

    Hi, I bought the UX32VD a few weeks ago. Most of the steps, mentioned in the article about the UX31A apply to the UX32VD too. I don't know what your problems are. All the steps are explained.
    [ 8.039202] asus_wmi: Can't find DSTS
    Just patch the kernel with the mentioned fix, or use the dkms variant. This will fix the can't find DSTS issue. After that, the asus-nb-wmi (or sth. like that) module will be loaded successfully, which makes most of the function keys work (except the screen brightness keys). The only thing remaining is to use the supplied hackarounds to be able to change the screenbrightness.
    After these steps, I created a .Xmodmap to remap the automatic kbd. backlight key and the touchpad disable key to XF86MonBrightnessDown (or so .. can't remember the exact name) and XF86MonBrightnessUp and respectively mapped the shortcuts with xfce4-keyboard-settings (XF86MonBrightnessDown to the command backlight down, XF86MonBrightnessUp to backlight up). Unfortunately, sometimes this is a little bit buggy. The scan codes change randomly on some reboots, eg: one time it gets recognized as XF86MonBrightnessUp, and a few keypresses later as something different.
    Hope they fix this issue with the 3.5 kernel, and eventually get the actual screenbrightness buttons to work.

  • P key issues on Macbook pro

    Hello! A few nights ago my girlfriend's lowercase p key stopped working properly. When pressed it activates the volume down function on F11. The uppercase P works however, but she recently told me that pressing capslock makes a comma. It is a 15 inch 2011 Macbook Pro. Any ideas as to what the issue is or what to do to fix it?

    Hold down the option key and select the Wi-Fi menu in the menu bar. What values are shown for the following?
              PHY Mode
              Channel
              Security
              Signal/Noise or RSSI
              Transmit Rate
    Please do not post the BSSID, as that information is private.
    Now hold down the option key again and select
               ▹ System Information... ▹ Network ▹ Wi-Fi
    Compare the two-letter Country Code with the ISO code for your country. Does it match? The code X0 means that the country couldn't be determined. The code X3 means South America, not otherwise specified.

  • Purchase order confirmation control key issue

    Hi,
    We have an issue about vendor confirmation control key in transactions ME21N/ME22N
    We have custom document types defined , ZNB - this is normal purchase order for external vendors and ZSTO - this is stock transfer orders between plants belonging to our corporation.
    For ZNB we can introduce the confirmation control keys with no problem.
    But when we try to introduce the confirmation control key for the ZSTO document type, the value is simply ignored and the field is reset to blank (NO error message)
    My question what can be the reason for this , probably there is some customizing setup that creates this behaviour but I cannot find it.
    Thanks
    H.Z.

    I put this succesive screen shots, first I select the confirmation key and after pressing enter the field is reset to blank .....
    I was trying to find also user exista but with no success so far ....
    Thanks
    H.Z.

Maybe you are looking for

  • Client not updating - Error Code # 0x80244023 and 0x801901f8

    Hello All, We have a Windows server (2008) which is not pulling updates from WSUS server. It has two NICs - one is public and another is configured with 172.x.x.x range for Admin use (this is for WSUS communication with no DNS setup). See logs below,

  • CHM does not display under Win7 64bit

    Hi all, the CHMs generated unter Win 7 32bit do not open correctly under Windows 7 Enterprise SP1 64bit. The CHM viewer opens and the TOC is visible, but all pages are empty (white, no error message). The CHM is stored locally. The same CHM can be vi

  • I have downloaded pages onto my mac but an not able to find it?

    I have downloaded pages from the App Store onto my Apple Mac and I am not able to find it on my laptop. I have tried using finder and that doesn't but when I go on apple store it has downloaded.

  • Problem applying text styling to css class

    Hi all, first off, apoligies if this is answered else were, I'm fairly sure its not but I cant seam to find any information on it. I may be complety missing it or I'm just looking for the answer with the wrong search terms. Anyway, my problem, I crea

  • How to enable Sfan??

    hi all i have just bought a antec smart power 350 watts power supply. its has a connector to connect to the motherboard (sfan connection), till now i cannot seem to be able to enable the sfan,i can see the spd of it or the temp its running. im using