Brush Option Error Message

I have a problem with brush option in PSE7 (which come with Wacom bamboo that bought many years ago and never use it).
It show me "invalid numeric" (see pic) and I can't do anything, the error message re-open after click "ok", I must go to my task manager and force close it evertime.
I don't know what happen, so if who know how to fix it, please tell me.
Thank you.

Try this
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.

Similar Messages

Selection option error message

Dear Experts,
I need your help to code an error message:
This is an ABAP report program:
User can enter either Group Key (LFA1-KONZS) or Vendor Number (LFA1-LIFNR), if enter both, send an messagee : 'Please enter either Group Key or Vendor Number, not both'
The error message show at the status line of the button of the input selection option screen.
How do I do that?
Here are my codes so far:
Selection Options
selection-screen: begin of block box1 with frame title text-001.
select-options: so_bukrs for bkpf-bukrs obligatory.
select-options: so_blart for bkpf-blart obligatory.
select-options: so_cpudt for bkpf-cpudt obligatory.
select-options: so_konzs for lfa1-konzs.
select-options: so_lifnr for lfa1-lifnr.
selection-screen end of block box1.
Thank you very much!
Helen

Hi,
Test the following Sample Code Hope will solve out your problem,
TABLES: bkpf, lfa1.
SELECTION-SCREEN: BEGIN OF BLOCK box1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: so_bukrs FOR bkpf-bukrs OBLIGATORY.
SELECT-OPTIONS: so_blart FOR bkpf-blart OBLIGATORY.
SELECT-OPTIONS: so_cpudt FOR bkpf-cpudt OBLIGATORY.
SELECT-OPTIONS: so_konzs FOR lfa1-konzs. " This
SELECT-OPTIONS: so_lifnr FOR lfa1-lifnr. " This
SELECTION-SCREEN END OF BLOCK box1.
AT SELECTION-SCREEN.
IF so_konzs IS NOT INITIAL AND so_lifnr IS NOT INITIAL.
MESSAGE: 'Please enter either Group Key or Vendor Number, not both' TYPE 'I'.
ENDIF.
" if you need that user must enter one value from the both than use the following lines of code too else Remove
IF so_konzs IS INITIAL AND so_lifnr IS INITIAL.
MESSAGE: 'Please enter Group Key or Vendor Number, not both' TYPE 'I'.
ENDIF.
Kind Regards,
Faisal
Edited by: Faisal Altaf on Feb 9, 2009 10:16 PM
Edited by: Faisal Altaf on Feb 9, 2009 10:34 PM

I changed my password and it updated on all of my devices except my ipad... Now I get this error message from icloud saying icloud backup cannot access my account... There are two options: ignore or settings

Error message: icloud unable to access my account... I changed my password, this is the message on my ipad. gives me two options: ignore/settings... ipad not responding to either... ?

Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Purchased books from iTune store and downloaded it. Now, when I try to send it to my iPod nano, I get an error message saying the title cannot be found. I cannot find a screen that offers an option to re-download. What gives?

I purchased a box set of books on iTunes, and downloaded them. The title shows up in the "purchased" section, but when I try to send it to my iPod nano, I get an error message telling me it cannot be moved because it cannot be found. I can't find a screen anywhere offering the option to re-download either. I've paid for the books, but cannot access them! Every time I upgrade iTunes, it gets more confusing and harder to use.

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

Will not allow me to add caldav account (Calendar couldn't log in to the CalDAV server "webdav.skedge.me"error message)or I get the not a secure server message with the option to continue...but then it sticks it wont continue

I WISH I HAD NOT UPGRADED...THIS IS A NIGHTMARE. I need to sync my appointment scheduler that is embedded in my website to my ical (which was easily done through publishing with the previous version) since I have upgraded I dont have the option to publish...but can add the cal DAV account, which I tried to do but I get a "Calendar couldn't log in to the CalDAV server “webdav.skedge.me”." error message if I go through edit ccount> add other account in system prefereneces otherwise I get a not secure server warning that will not continue when I select continue if I simply try to add an account using the + sign options at the bottom left of the systems preference pop up window
found a potenital fix (that I think would work if I could understand how to do what they are telling me to do) it said to configure webdav sharing for active directory accounts...tried to follow the instructions...could not understand them (very techy instructions).
FYI to any one that may find it in thier heart to answer this...I AM NOT COMPUTER LITERATE I am a veterinarian not a computer programer...so please but things in terms I can understand...i dont know what root access or server admin means...I dont know how to edit config files or even open directories with terminal ...i dont know what pico is or how to open it on my computer. Thanks
If know one can help can someone please tell me how to un-upgrade..this *****!
thanks
Catherine

Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
* https://support.mozilla.com/kb/Secure+Connection+Failed
You can retrieve the certificate and check who issued the certificate and other details like when it is valid.
* Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
* Click the "View..." button to inspect the certificate and check who is the issuer.

How do I view and open all my files again that are on my external hard drive?? Error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject.

I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

Error message for the select options

hi.
i want to throw thw error message if the user enters the value not valid(not in the range) for the zregion1 of zbwcntry of the select options.
and user should be able to correct it before moving ahead.
Also,iis not a mandatory field,So if it is initial,it can b blank.
but if the input doesnot lie in the range,it should give error message on the selction screen.
please guid with the line of codes.

Check out this code:
TABLES: PERNR.
SELECT-OPTIONS VO_PERNR FOR PERNR-PERNR.
AT SELECTION-SCREEN ON VO_PERNR.
IF VO_PERNR IS INITIAL.
    MESSAGE 'Enter some employee IDs' TYPE 'E' DISPLAY LIKE 'S'.
ELSE.
    IF '000001' NOT IN VO_PERNR.
      MESSAGE 'Employee id: 1, not selected' TYPE 'E' DISPLAY LIKE 'S'.
    ENDIF.
ENDIF.

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

# Question
Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
Java(TM) Platform SE 6 U24
Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

Error message when trying to use "blend options"

CS6, vista ultimate 64bit,Intel quad2,ATI Radeon HD3600,8gb ram Working with tiff or psd files, when I try to access layer styles "blend if" I get error message "can not complete request because of program error". If I convert the file to JPEG and add layer it works as it should. I'm using update 13.0.1.3 and have uninstall & reinstalled program and updates. PS error log:
2014:09:08 12:21:02 : ..\..\sources\UPattern.cpp : 1670 : REQUIRE failed
2014:09:08 12:21:57 : ..\..\sources\UPattern.cpp : 1670 : REQUIRE failed
2014:09:08 13:04:57 : ..\..\sources\UPattern.cpp : 1670 : REQUIRE failed
Any help would greatly appreciated

Please read this, restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved might be of special interest:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Since I installed Nero 2104 I get an error message when I try to start iTunes: registry settings changed probably due to other cd/dvd burning program please reinstall iTunes, which I've done using repair option but the problem persists...?

Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters

Tried installing latest iTunes (10.5.3.3). During installation received error message asking to verify access to "C:\Config.Msi\187e500.rbf". The only option it gives is "try again" or "cancel". No choice but to cancel installation. Any suggestions?

The problem started when my current iTunes kept popping up a window stating that my Auto Run was turned off. (which means iTunes will not be able to recognize when a CD is inserted or ejected). It asked if I wanted iTunes to run Auto Run and I select Yes every time (this window pops up every time I open my iTunes), but a second window pops up stating iTunes cannot turn on my Auto Run setting (but it will still be able to recognize CDs) to which I choose okay. A third window pops up after stating that iTunes was not properly installed and if I wish to import or burn CDs I need to re-install iTunes, except that I can import CDs since I did this only yesterday and this problem has been going on at least a month.
To add to this, I cannot cannot automatically update to version 10.5.3. (I don't recall which problem came first, my Auto Run problem or the fact that my iTunes can't update). iTunes suggested that I manually install the update, so I went to the apple site and tried manually installing the latest iTunes (10.5.3). However, during the installation process I received an error message. It asked me to verify access to "C:\Config.Msi\187e500.rbf". The only option it gives is "try again" or "cancel". I tried hitting Try again a few times but the same error message popped up, so I had no choice but to cancel the installation. Afterwards, I tried searching in my C drive but could not find "C:\Config.Msi\187e500.rbf"
Does anyone have any suggestions how I can update my iTunes?

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me

Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

How do I resolve this error message? The iPhoto library is on a locked volume. Reopen iPhoto when you have read/write access, or reopen iPhoto with the Option key held down to choose another library.

Hi j,
I don't know if this will work, but I'd try logging in to an admin account, going to your main library (not user library), opening it, opening Application Support, selecting iPhoto, hold down the command key and press i, click on the lock in the lower left, entering the password and making sure you have Read & Write privileges for System and Admin.

Brush Option Error Message

Similar Messages

Maybe you are looking for