BSOD after an in-place upgrade from Windows Server 2003 R2 to Window Server 2008

Xylems92 wrote:Unfortunately, we cannot take this approach.We have to move to 2008 (not R2) due to a software that runs on this machine and is validated will not run on 2008 R2 and above. In order to keep validation, we can only do an inplace upgrade. If we choose to either purchase the software upgrade or revalidate the system, both approaches will cost $80k+. So i need this to work as an in place upgrade to 2008I feel your pain, but any company worth their salt will (meaning the vendor) should know that you cannot simply perform an in-place upgrade of a Server OS.
Really the proper method is to backup everything, format and install Server 2008 (are you limited to 32-bit?), restore data/reinstall software. What's the reasoning for the upgrade? 2003 EOL or something else?
Do you have a guarantee that the software will even work on...

Hello everyone. 
We seem to be having an issue when doing an in place upgrade on our windows 2003 R2 server to go to Windows 2008. Every time we try and do the upgrade, once the server reboots it blue screens with no real information. Just mentioned to try and do a check disk to check for hard drive issues.
It gives us the option to go the earlier version of windows (back to 2003 R2) but nothing we have tried has succeeded so far.
Does anyone have any suggestions?
Regards,
-Xylems92
This topic first appeared in the Spiceworks Community

Similar Messages

  • After the in place upgrade from SharePoint server 2007 to 2010, the out of the box approval workflow does not prompt for additional information after check in of a major version.

    I think it has to do with the interaction between Word, InfoPath, IIS, and /or SharePoint, but I cannot put my finger on it.  Maybe client integration or authentication settings?  I have looked at it in wireshark
    and have not seen anything glaring.
    Steps to reproduce the (working) behavior:
    Set up a document library in SharePoint 2010.
    Under versioning settings, make the following changes:
    Set Require Content Approval for submitted Items to Yes
    Select Create Major and Minor (draft) versions
    Set require checkout to Yes
    Create an out of the box “approval” workflow with the following settings:
    Start this workflow to approve publishing a major version of an item.
    I then create a new document. Save it.  check it in.  it is now version 0.1.
    I then open it again. check it out.  Make a change. Close and save it.
    Check it in.
    Publish major version:
    At this point a screen is presented to me to enter workflow parameters.  This screen comes up in Enterprise 2013 and MOSS 2007, but not the migrated version of 2010:
    This is what I need help with.  It should come up in 2010.  To fix it in 2013, I had to change the IIS bindings to only have 1 entry for a port.  I did this for 2010 and it did not work.
    Any help or ideas is very appreciated.  Thanks very much in advance.

    Hi Chris,
    According to your description, my understanding is that the approval workflow cannot work when the workflow was set to start to approve publishing a major version of an item after upgrading to SharePoint 2010.
    I recommend to check the approval workflow in Workflow settings of the corresponding library to see if the Start this workflow to approve publishing a major version of an item is checked.
    For test, I recommend to create a new OOB approval workflow and set it to start to approve publishing a major version of an item in the same library to see if the workflow can work.
    Thanks
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • ADWS Broken after in-place upgrade from Server 2008 R2 to Server 2012 R2

    I performed an in-place upgrade from 64-bit Server 2008 R2 to Server 2012 R2.  This machine ran Active Directory Web Services. After the upgrade ADWS will not start. I get the following event log error:
    Log Name:      Application
    Source:        .NET Runtime
    Date:          11/21/2014 3:23:02 PM
    Event ID:      1026
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      COMPUTER
    Description:
    Application: Microsoft.ActiveDirectory.WebServices.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ServiceModel.CommunicationObjectFaultedException
    Stack:
       at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
       at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart(System.Object)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name=".NET Runtime" />
        <EventID Qualifiers="0">1026</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-11-21T20:23:02.000000000Z" />
        <EventRecordID>65596</EventRecordID>
        <Channel>Application</Channel>
        <Computer>COMPUTER</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Application: Microsoft.ActiveDirectory.WebServices.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.ServiceModel.CommunicationObjectFaultedException
    Stack:
       at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
       at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
       at System.Threading.ThreadHelper.ThreadStart(System.Object)
    </Data>
      </EventData>
    </Event>

    I compared the registry with a working system but the Counters - and all other keys - looked fine.
    At the same time as upgrading a DC a colleague was updating an unrelated server, and he started to see similar events in the event log (but for the Dell OpenManage Essentials service, not ADWS). The error was complaining about KERNELBASE.dll which set my
    spider sense tingling. We knew that this server had Windows Updates pending. Fully updating it solved the problem on that server.
    I solved the ADWS problem in the end by fully Windows Updating the DC. In particular, the ADWS Service started successfully after installing KB2919355 and rebooting. That also
    'unlocked' a further 59 updates pending. 
    After the in-place upgrade I always fully Windows Update but I'm 99% certain that KB2919355 did NOT show up when I did a Check for Updates straight after a reboot so I thought the DC was up-to-date. I then spent hours investigating the ADWS problem and rebooted
    as part of the diagnostics. It was then that I noticed on the logon screen that there were updates pending...
    Moral of the story? Windows Update, then Update again, and again, and again. The length of time it takes to Windows Update after an upgrade from 2008R2 to 2012R2 is painful though.

  • In place upgrade from Windows Server 2000 to Windows Server 2003 ADS

    Hi...is anyone aware of any issues with performing an in place upgrade from Windows 2000 Server to 2003 Server, which is currently running ESSBASE? Please advise, if you have any information. Thank you.

    You can post your question in ESSBase forum
    Essbase

  • Issues when Sharepoint Services 3.0 OS upgraded from windows server 2003 standard to windows server 2003 enterprise

    In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
    error has occurred" screen shot below of the error. 
    Any help?

    Not sure I can help.  In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint.  Many of the prerequisites that were installed when SharePoint was installed are OS specific.  You can either contact
    Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Can I upgrade from Adobe Acrobat 9 Pro for Windows to Adobe Acrobat IX Pro for Mac?

    Hello,
    I have a question concerning Upgrades:
    Can I upgrade from Adobe Acrobat 9 Pro for Windows to Adobe Acrobat IX Pro for Mac?

    Hi Christian ,
    I am not sure if you are eligible to upgrade from Adobe Acrobat 9 Pro for Windows to Adobe Acrobat IX Pro for Mac as this is an older version of Acrobat.
    Refer this link to connect with the chat support team ,they will assist you further with the same.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Regards
    Sukrit Dhingra

  • In place upgrade from R1 to R2 2012

    Is it safe and supported to do an in place upgrade from SCCM 2012 SP1 (R1) to SCCM 2012 R2?

    Yes it is.  See
    http://gerryhampsoncm.blogspot.com/2013/10/in-place-upgrade-sccm-2012-sp1-to-r2.html
    And the official TechNet guide here:
    https://technet.microsoft.com/en-us/library/jj822981.aspx?f=255&MSPPError=-2147217396
    Jeff

  • 'In place' upgrade from 7.8 to 8.1

    Hi!
    I'm kicking off some planning around an upgrade from 7.8 to 8.1 / 8.2 Public Sector. Aside from the repository and non-repository code item work, I've started to think about the logistics of upgrading the actual software. Our plan is to keep the phyiscal architecture as is, as it's more than capable of supporting 8.1. We're running completely on Win2K3 with an Oracle 10g back end DB.
    Has anyone performed an 'in place' upgrade from 7.8 to 8.1? That is, starting cutover with 7.8 running on a set of phyiscal servers and finishing cutover with 8.1 running on the same set of machines?
    I'm thinking along the lines of a 2 phase cutover, taking a weekend to install software, configure new components (such as BI Publisher, as we're replacing Actuate at this point) and doing as much 'zero impact' work as possible. This will be an outage weekend, where we take 7.8 offline to do any work and bring it all back up at the end. The second phase would be the database upgrade, SRF, repository and non-repository element deployment, along with bringing up the 8.1 system.
    I have a few obvious thoughts, such as installing Gateway and Server components on machines already running 7.8 versions. CFG and siebns settings should be kept distinct in different installation folders, but does Siebel store anything in the registry? I'm also aware that the Gateway and Component ports will be the same / conflicting, but this shouldn't be a problem if only one set of services are running at any given time.
    I'm also concerned that we cannot do the Gateway and Server installation and config without having an 8.1 database already in place. Is that the case? If not, I'm hoping we can get the installations and component group allocation and configuration done without affecting the 7.8 service. We can then take full server backups and be ready to 'just' do a database upgrade on the second cutover date.
    Anyway, I'd really appreciate any thoughts or experiences that you all may have or have had on such a plan.
    Thank you!

    Hi,
    From your message, I understand that you have 8 siebel servers and 2 for oracle database (Correct me if I am wrong). For the production environment you will need to remove all siebel components from at least one system each for gateway, siebel server and webserver. Do ensure that your database is properly backed up before proceeding with a db upgrade.
    Do note that removing one server each will be hitting your application very hard and hence it will be great if you proceed only during a long weekend or sometime giving you a good time duration to do the upgrade and do the system checks also. Also I would suggest to do siebel install and oracle db upgrade in one go. Please consult your db admin for the best way forward in this.
    Once your 8.1 installation is running do the import of all the integration points that you have for the older system and then verify their functioning with your installation. Only when everything you need appears to be working as per the previous system, shut down the older system and remove existing Siebel components and do the necessary installations.
    You may like to see this site "http://download.oracle.com/docs/cd/B31104_02/books/SiebInstUNIX/SiebInstCOM_InstGateway3.html" , "http://download.oracle.com/docs/cd/E05553_01/books/SiebInstUNIX/SiebInstCOM_InstSiebSrvr3.html" and "http://download.oracle.com/docs/cd/E05553_01/books/SiebInstUNIX/SiebInstCOM_InstSWSE3.html" for pointers in case you are not comfortable removing siebel server components from your production environments.
    With Regards,
    Tanmay Jain

  • Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

    Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
    It should be supported from technet site
    And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
    Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

    Thanks for the reply.
    I copied some sentences in Setuperr.log
    2014-07-10 23:58:33, Error                       
    Failed to find driver file path. Error=00000002x[gle=0x80092004]
    2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
    2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
    2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
    {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
    does not exist.[gle=0x00000003]
    2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
    {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
    2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
    usbhub20.
    2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
    2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
    2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
    Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
    and drmmgrtn.dll?

  • Migrate from Server 2003 (no Exchange, single server) to SBS 2011

    Are there any Technets or other Microsoft documentation on migrating from Server 2003 (no Exchange, single server) to SBS 2011?  I understand it is possible, but I would like confirmation and some documentation before purchasing the appropriate hardware
    and licenses.
    Thanks,
    Doug
    Doug Orr

    Hi Doug,
    In general, the migration is the similar with migrating process from SBS 2003. In addition, also have main
    difference.
    “The main difference is that you don’t have to remove the source and that you have to follow the migration
    instructions as the SBS migration wizard will not launch.”
    You can get above description from following similar thread. Please refer to.
    Migrate from Windows Server Standard 2003 (not SBS) to SBS 2011
    http://social.technet.microsoft.com/Forums/en-US/68790e41-b833-4e81-8200-63852ab9e196/migrate-from-windows-server-standard-2003-not-sbs-to-sbs-2011?forum=smallbusinessserver
    Meanwhile, please refer to the following article. It may be helpful.
    Step By Step Guide To Migrating To SBS 2011
    http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    However, as Robert suggests, would you please confirm specific version of SBS? It may help us to understand
    clearly and provide correct information.
    Hope this helps.
    Best regards,
    Justin Gu

  • Migrate MOSS 2007 Server from Server 2003 (32-bit) to Server 2008

    I have a client with MOSS 2007 installed on Windows Server 2003, and a database server (SQL 2005) also on Server 2003. they have two new Windows Server 2008 servers, and they wish to do a migration.  They have custom Features, including Event Receivers
    installed in their environment.
    Do I need to install the 32-bit edition of MOSS 2007 on the new server in order to be able to use the pre-compiled custom Features used in the current server?
    My plan is to do the following:
    (a)  Migrate databases from current database server (SQL 2005) to new database server (SQL 2008),
    (b)  Re-assign SQL redirection to new database server (the database was previously on the same box as the WFE, and this was separated out last year to another server, but redirecting the SQL Server,
    (c)  Install MOSS 2007 (32-bit) on the other new server
    (d)  Patch both instances of MOSS 2007 to the same point
    (e)  Create (dummy) site collection on new server, and install all custom Features on server
    (f)  Add new server to existing Farm
    (g)  Remove previous server from Farm
    What must I do to install existing custom Features on new server?
    Is there anything that I have left out of the process?  Do I need to do anything about the SSP running on the current server?

    Thanks Keith for your reply.
    Even is USMT does not work, we are ok. SMIGdeploy will be helpful.
    Basically, want MDT to run some scripts on the Windows 2003 server, post which install Windows 2012 and join it to the existing domain with the same computer name.
    Then hydration kit to help with the installation of features etc. Also, we would like to take a complete backup to a WIM before migrating.
    I am sure this is workable.
    Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"

  • In-Place Upgrade from Windows 7 Ent N to Windows 8 Ent N not working

    I have spent the better part of 2 days trying to get Windows 7 Enterprise N to upgrade to Windows 8 Enterprise N with no results.  The error message I receive after selecting the upgrade option and the subsequent compatibility check is:
    Windows 7 Enterprise N cannot be upgraded to Windows 8 Enterprise N. You can choose to install a new copy of Windows 8 Enterprise N instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You'll need to reinstall
    any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows 8 Enterprise N, click the Back button
    in the upper left-hand corner, and select Custom (advanced).
    I have tested both production and MSDN copies of Windows 7 Ent N > Windows 8 Ent N and neither will upgrade.  Per MS documentation, I SHOULD be able to upgrade.  I've found nothing regarding this via search engine except one person having the
    same issue when Windows 8 was still RTM.  However, no one replied back to him.

    ForcedToCreateThisProfile,
    The Windows 8 and Windows 8.1 Upgrade Paths page show what versions of Windows 7 can be upgraded in place to Windows 8.  According to the page, the only versions of Windows 7 that
    can be upgraded to Windows 8 Enterprise are:
    Windows 7 Professional (Volume License)
    Windows 7 Enterprise (Volume License)
    Windows 8 (Volume License)
    As you can see, there is no mention of any N Edition of Windows having the capability to upgrade in place.
    I hope this helps!
    Mike
    Windows Outreach Team – IT Pro

  • In-place upgrade from windows 2008 R2 to windows 2012

    Hi all,
    we are currently running SAP ERP EHP7 (Netweaver 7.40 ) on Windows 2008 R2 server, MS SQL 2012 database.
    Is it possible to do in-place upgrade to Windows Server 2012?
    We want to do upgrade without buying new hardware  and perform system copy.
    Regards

    Hi,
    the only note where we discussed our findings about in-place upgrades of the Windows operating system is SAP Note 1494740.
    Even though the upgrade to Windows Server 2012 is not discussed explicitly, the note is also valid for Windows Server 2012.
    The only thing you have to take care is: upgrade your system components (database, other 3rd party software) to versions supported on Windows Server 2012 before you are performing the in-place upgrade.
    Regards
    Peter

  • SPS upgrade from 18 to 21 due to Windows 7 and IE 8 Release

    Hi Guys,
    Our client has decided to upgrade their user's OS from Windows XP to Windows 7. Also the IE will be upgraded to IE8.
    We did an impact analysis with a single system for the BW front end. Except a few minor errors, nothing serious troubled the SAP in Windows 7 OS.
    SAP has confirmed that for the official support for Windows 7 and IE 8 will require minimum SPS of 21. Thus we are planning for SPS upgrade from 18 to 21.
    I am still waiting for the Side Effect Report, I would like to check with you if anyone has encountered any error after Windows 7 upgrade?
    Will BEx work even if the OS is Windows 7 and Office is low version such as 2000, 2003.
    Any impact on portal 700?
    Appreciate any kinds of input from you All
    Best Regards,
    Shailesh

    Hi Guys,
    Our client has decided to upgrade their user's OS from Windows XP to Windows 7. Also the IE will be upgraded to IE8.
    We did an impact analysis with a single system for the BW front end. Except a few minor errors, nothing serious troubled the SAP in Windows 7 OS.
    SAP has confirmed that for the official support for Windows 7 and IE 8 will require minimum SPS of 21. Thus we are planning for SPS upgrade from 18 to 21.
    I am still waiting for the Side Effect Report, I would like to check with you if anyone has encountered any error after Windows 7 upgrade?
    Will BEx work even if the OS is Windows 7 and Office is low version such as 2000, 2003.
    Any impact on portal 700?
    Appreciate any kinds of input from you All
    Best Regards,
    Shailesh

  • In-place upgrade from Server 2012 to 2012R2 is failing

    Hello,
    I'm trying tu upgrade a VM from Windows server 2012 to Windows Server 2012 R2, but the upgrade is failing with an error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
    Error code 0x80070522"
    The VM i'm trying to upgrade has SQL server 2012 and some related tools installed
    The VM is running on a Windows server 2012 Hyper-V host
    I have tried a few different installation media, downloaden from the MS licensing site and from MSDN, but all give the same problem.
    After searching for logs i found these relevant messages in C:\$WINDOWS.~BT\Sources\Panther\setuperr.log
    2014-07-15 11:25:10, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:25:10, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] Failed to get launcher layout, hr=0x80070002
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:27:04, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    // a lot of these kind of messages
    2014-07-15 11:27:55, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:27:55, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:24, Error      [0x0808fe] MIG    Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    2014-07-15 11:28:29, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
    2014-07-15 11:28:32, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:32, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:43, Error      [0x0803b6] MIG    Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:28:43, Error      [0x0803b6] MIG    Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
    2014-07-15 11:31:35, Error      [0x0808fe] MIG    Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
    2014-07-15 11:33:25, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
    2014-07-15 11:33:25, Error      [0x0808fe] MIG    Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
    2014-07-15 11:33:28, Error      [0x0606cc] IBS    WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
    2014-07-15 11:33:28, Error      [0x0600a1] IBS    DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:33:28, Error      [0x060082] IBS    Callback_ImageTransfer:Failed to lay down the WinPE image; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:41:11, Error      [0x0606cc] IBS    WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
    2014-07-15 11:41:11, Error      [0x0600a1] IBS    DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
    2014-07-15 11:41:11, Error      [0x060082] IBS    Callback_ImageTransfer:Failed to lay down the OS image; hr = 0x80070522[gle=0x00000057]
    Can anyone help me with this issue?
    Regards,
    Tom

    Yes, domain admins are members of the local administrator group when the macine is joined to a domain, but the opposite is not true.  Local admins are not necessarily members of the domain admins group.
    . : | : . : | : . tim
    Tim,
    Yes i Understand that a local administrator is not always a domain administrator, but i think this has nothing to do with my problem.
    To be sure i have logged in to this server with the local administrator user and started the upgrade again. As expected I got the same error message, so this is nog a permissions problem.
    Can somebody who can help me to solve this probleem?
    Regards,
    Tom

Maybe you are looking for

  • Copa error during billing

    Hi , while sales order billing vf01 the system is throwing following error. Valuation with material cost estimate: error with product "4000000129" Message no. KE350 Diagnosis In Profitability Analysis (CO-PA), the system tried to valuate a line item

  • Stock Count MI01 for new,refurbish and second tyre - using same material no

    Hi Everyone Please assist me how do you differentiate between the new, refirbish and second tyre when you create a new count document - MI01 Susan

  • App Store security questions keep timing out?

    I am trying to download some new apps, and since I updated to IOS6 it keeps asking me to answer security questions and add an email, and every time I do, it says it has timed out no matter what I try? Any tricks or suggestions?

  • Document Numbering Query

    Hi Experts, Why is it that I can update some of the Next Document Numbers (ie AP Invoices and AP Credit Notes) but not others (Sales Quotations and AR invoices). All of the document types have records added, which renders the help files incorrect Nex

  • I.R Questions

    Hi, Under Adapter Objects in I.R 1. What is Adapter Metadata and Use of it? 2. What is Communication Channel Templates and Use of it? Other Topic: In a RFC to File Scenario, I Created RFC Destination of Type <b>T</b> with ProgramID. a.What is Program