BSOD terminal server 2008 r2 after user logoff

Hi there,
We have a serieus problem with users that logoff on a terminal server. When a user logoff of the terminal server we'll get a bsod. Win32k.sys crashes.
Our terminal server is a Windows 2008 r2 sp1 based on VMWare 5.0. We have installed al the available updates on this Windows Server.
Any idea how to solve this problem?
This topic first appeared in the Spiceworks Community

Ok, I think I found the issue.
I installed JRE 7 Update 51 for 64-bit. And Chrome does not have a 64-bit for Windows.
I went back and uninstalled this JRE version and instead installed the 32-bit version and now the Chrome plugin is working.

Similar Messages

Adding printers to Terminal Server 2008 for all users

Hi! I'm trying to add a printer to a terminal server for all users that log in. I've been reading around and this seems like a working solution:
Rundll32 printui.dll,PrintUIEntry /ga /c\\localcomputername /n\\servername\printername
So I ran this with the proper parameters. Nothing shows up in Devices and Printers with the name I specified. I rebooted the server, still nothing. I re-run the command above and it tells me there's already a printer defined with that name.
I look at Devices and Printers and the name I specified still isn't there. Why doesn't the above command work like it's supposed to?
Thanks!

Thanks, yes, that was the first command I tried (without the /c). All subsequent attempts tell me the printer already exists yet it definitely does not show up under Devices and Printers. I ran the above logged in as Administrator with an elevated
command prompt. The printer can't be seen from this login or a 'normal' user login.

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

JRE on Terminal Server 2008 won't work in User Sessions

I have a problem with Java 6 Update 14 on a Windows 2008 Terminal Server.
Java Applications (from normal websites) are starting in Administrator account without any problems.
When i start several website with a normal User Account (Internet Explorer 8.0 installed), the Java-Console puts out the following error:
JNLPException[category: Systemkonfiguration : Exception: null : LaunchDesc: null ]
Then the Java tray icon is restarting for 1 or 2 times, and then the java-field on the websites stays emtpy.
Any idea which problem this could be? I think it would be a permission problem, but where i have to search?
Best Regards
Wolfgang Bauer

Now I've tried to install Firefox on the terminal server. Now in user sessions Java is working with Firefox, but not with Internet Explorer, so:
At Administrator account, Java Applets are working with IE and Firefox.
At user accounts, Java Applets work only with Firefox.
So where could be the problem with IE 8.0? When a Java page is loading, the Java tray icon appears for a few seconds, and goes away, 2 or 3 times.
I've already tried to reinstall Java 6
We need to open the Websites with Internet Explorer 8
Best Regards Wolfgang

Cannot quit Visual FoxPro (Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1)

Hi everybody:
This is not the typical question about this error, because the problem here is not about how to quit (CLEAR EVENTS then QUIT). The really and weird problem is that our application do no execute the error trapping routines (Try/Catch and ON ERROR) and tries
to directly Quit.
I have never seen something like this before, error trapping routines not executed.
I try to explain the problem better:
- The user click on the Citrix icon of our App
- Citrix shows the executed processes (establishing connection, applying user config, loading profile, etc)
- The Application (VFP 9 SP2) is started and in any moment, while loading, occurs an error that is not handled by error handlers, and it executes a "kind" of a Quit command, that we detect because have a ON SHUTDOWN to catch it, then the App shut
down and the user must click the Citrix icon and start all over again, up to 7 times, when the App really load and work.
- I think that it is useful to make clear that no QUIT command is really causing this, just the behaviour of the QUIT when an error occurs, but just while loading. If the App get completely loeaded, then everything works as expected
Infraestructure:
- Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1
- There are up to 50 concurrent users max in every virtualized server
- More than 10 GB of free disk space / Up to 4 GB ram
- RAM Memory is never used to the max
- CPU (Intel Xeon) is never used to the max (up to 90% in some cases)
- Data (DBFs for temporal work) ar on local drive, not over network (to avoid network known problems with smb2-3)
- There are connection to a Oracle 11 database for permanently storing the data
About the errors:
- They are not always the same or in the same place. In example, in one execution could fail the query of SET("Printer",2), in other execution could fail a SET PROCEDURE TO xxx ADDITIVE (sometimes already loaded), in other could fail a "DO
WHILE .T." in a init event.... completely crazy, and in all cases the errors are not thrown, not a single error code, the App just try to quit, as if ALT+F4 where pressed.
- All this does not happen allways to everyone, but happens many times in the day to many many users as to be worried
- The same user can have this error many times a day, but not allways
- Some of the problems started when migrating to Windows Terminal Server 2008, but didn't notice nothing special in the beginning, but a year later (last 2014) problems tend to go worse
Tried solutions:
- For the "SET PROCEDURE TO xxx ADDITIVE" error, a "IF xxx $ SET('PROCEDURE')" check was added
- The "SET('Printer',2)" check was moved out of initialization code, so it executes when user want to print the first time. In this case was neccesary to talk with IT guys to map a default printer after the App runs, and not in background, as it
was.
- Other checks and modifications was made to minimize posibility of errors
- Adding a timeout of 5 secs in the start of the program, to force a wait
- Restart of virtual servers (not the phisical) every 3 weeks
What I suspect:
- Some Microsoft optimization (memory?, process execution?) in WTS-2008 may interfere?
- Some VMWare memory management may interfere with WTS-2008?
- Some Citrix management may interfere with both?
- Server degradation because of day to day use
Results until now:
- Apparently, adding the timeout to force 5 secs delay and the restart of the server have made a notable enhancement in App start and running
with far fewer
errors
Has
this happened to anyone?
Thanks! o_O
Fernando D. Bozzo / Madrid (Spain)

I never had this type of problems, but somewhat similar start up problems. I'd say it indicates resource problems. Low RAM can cause many unpredictable things. In my case loading much data at the begin of an application caused out of memory errors, which
were reported and logged normally, though.
I made a small tool using Windows API functions GetPerformanceInfo and GetProcessMemoryInfo, you'll find declaration and usage like usual at the News2News site. It's a bit lengthy and cluttered, but pretty much what you find there anyway, so I'll not post
my utility code.
I could quite clearly see how many users degraded available memory per session and at some time no further instance of the application was possible on the server. In my case RDP was used to start the app, Citrix will be quite the same, in the end the application
runs on some server and users see the remote running application.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

Installing SBO 2007A PL47 for use on Windows Terminal Server 2008

SAP has announced it supports Windows Server 2008 32 bit. Does this mean it will also support Windows Terminal Server 2008 32 bit for hosted clients? Any input will be appreciated

Hi,
There is annoucment only of Windows Server 2008. You can check the status on service Market place under Supported platforms.
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000705857&_SCENARIO=01100035870000000183&_ADDINC=011000358700001192682007E&
Under Product Availablity
Regards
Vikas
SAP Business One FOrums Team
Edited by: Vikas Rastogi on Mar 12, 2009 10:22 PM

Is BPC 7.0 compatible with Windows Terminal Server 2008?

Is BPC 7.0 compatible with Windows Terminal Server 2008? We are having printing issues when on WTS 2003.

BPC 7.0M SP08 was released on September 1st and now supports the client install on both Server 2008 and Windows 7 so yes, you should be able to use terminal server in Windows 2008 if you install SP08. It also has limited support for Office 2010, full support will come with SP09. SAP Note 1490544 is the central SP08 note, and 1504400 is the download note.
-Brian

Cpeaut32: error in formula when print CR rpt 8.5 on terminal server 2008

I have had this similar error in the past when I tried to run an older version of cr (5.0) on a newer pc (xp)and then I had to update some dll's and register them.
Now the same kind of error but different versions of CR and pc software.--CR 8.5 and terminal server 2008
The error reads the same: error in formula (and then code from function in the report where the error occured). "A number, currency amount, boolean or string is expected here... "
The report runs fine on the older terminal server . The program is a VAM application. Any attempt to print report fails (using the preview, print or printer icons)
A solution for a similar problem ( from the sap library ) using CR 8.5 in a Citrix or Terminal Server enviornment was to copy all files from   <systemroot>\Crystal
to
                                                  <systemroot>\System32
But before doing anything i wanted to find out if I needed to update some dlls.   or what is needed to detemine which dll's are causing the problem and what to do about it.

Cpeaut32 is very very old legacy SDK and will not likely ever work on newer operating systems. Upgrade to .NET to get support with recent OS's.

Bug: CR XI on Windows Terminal Server 2008

We have a problem when printing a report for example with 2 columns, where the 1st column's content is larger than the width of that column, then the content is printed through colum 2.
But only when:
working on remote on Terminal Server 2008
when printing on a remote printer (redirected)
There's no problem:
in the preview window
when printing to a local printer of the server
on Terminal Server 2003
Any ideas?
Tx
Patrick

You mentioned it worked fine in the preview window, so does the issue only show up when not printing with data?

Adobe Acrobat X Pro - Windows Terminal Server 2008

Hi All,
Im hoping some one maybe able to help me on this, We have recently purchased the Adobe Acrobat X Pro for one of our clients and have just installed it onto their Windows 2008 x32 Terminal server. Inatall appeared to be fine, no errors reported and nothing logged into the event viewer. However we seem to be having issues with it... I did read a PDF guide early last week that said the X Pro should work fine on a Server 2008 - The install instructions where rather straight forward and I thought their would have been more to it than just installing it via the control panel.
The issue we have is the program opens up ok and is usable for about a min and it then crashes with no obvious reason, From looking in the event log it appears to report issues with the PDApp.exe and the Kernel32.dll - Has anyone come across any similar issues?
Many Thanks

Hi,
You can also send the crash dump by following the below mentioned steps:
Install WinDbg from http://www.microsoft.com/whdc/devtools/debugging/installx86.mspx
Launch WinDbg via the shortcut
Click File->Open Executable
Select Acrobat.exe from "C:\Program Files\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe" and hit "OK"
Remember to press "g" and hit enter when you encounter the first breakpoint and then you will see a text "Debuggee is running" and Acrobat will be launched
Open whatever file is it that produces the crash in Acrobat.
When you have successfully reproduced the sceanrio causing the crash/freezing of Acrobat X, enter the below command in the WinDbg terminal
.dump /ma c:\temp.dmp (Hit enter)
This will produce the crash dump at C:\ by the name of temp.dmp
After that please upload the dump (compress the dump using WinZip or likewise) at some third party sites and provide the link for the same. Also, if it’s possible could you share the PDF as well, for which your application crashes on a consistent basis.

BSOD on Server 2008 STANDARD SP2

Assistance with BSOD on Dell R710 Server running Server 2008 STANDARD SP2
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Communication was lost to this server (Not a power outage). It was discovered with a blue screen with the above error. A memory dump was created with reference STOP 0x0000000D1. NETIO.SYS Address 8075FA37.
The machine rebooted after the dump and upon logon the following message was displayed:
Problem signature:
Problem Event Name:          BlueScreen
OS Version:           6.0.6002.2.2.0.272.7
Locale ID:              1033
Additional information about the problem:
BCCode: d1
BCP1:     000000D4
BCP2:     00000002
BCP3:     00000000
BCP4:     8075FA37
OS Version:           6_0_6002
Service Pack:         2_0
Product: 272_3
Files that help describe the problem:
C:\Windows\Minidump\Mini011315-01.dmp
Link to one drive for the dump files:
https://onedrive.live.com/?cid=D0667AD0A7D6788C&id=D0667AD0A7D6788C!180

* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 000000d4, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: 8075fa37, address which referenced memory
Debugging Details:
Unable to load image \SystemRoot\system32\DRIVERS\Teefer.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Teefer.sys
*** ERROR: Module load completed but symbols could not be loaded for Teefer.sys
READ_ADDRESS: GetPointerFromAddress: unable to read from 81d6d874
Unable to read MiSystemVaType memory at 81d4d420
000000d4
CURRENT_IRQL: 2
FAULTING_IP:
NETIO!StreamGetCalloutContext+d4
8075fa37 833800 cmp dword ptr [eax],0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
TRAP_FRAME: 9bd152f4 -- (.trap 0xffffffff9bd152f4)
ErrCode = 00000000
eax=000000d4 ebx=000000d0 ecx=9bd15374 edx=00046e28 esi=000001a0 edi=c0000017
eip=8075fa37 esp=9bd15368 ebp=9bd15378 iopl=0 nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206
NETIO!StreamGetCalloutContext+0xd4:
8075fa37 833800 cmp dword ptr [eax],0 ds:0023:000000d4=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from 8075fa37 to 81c83ecd
STACK_TEXT:
9bd152f4 8075fa37 badb0d00 00046e28 00000000 nt!KiTrap0E+0x1c5
9bd15378 8075fac6 001f3516 00000000 00000107 NETIO!StreamGetCalloutContext+0xd4
9bd153ac 80761508 001f3516 00000000 00000107 NETIO!StreamGetCalloutAndDataContexts+0x33
9bd15428 80750580 00000014 a1756830 9bd15734 NETIO!StreamProcessCallout+0x63
9bd15480 8073c44b 00000014 9bd15734 9bd1563c NETIO!ProcessCallout+0xee
9bd154b0 8073c4ab 00000014 d6b06208 9bd15734 NETIO!ProcessFastCalloutClassify+0x2c
9bd15590 8075ed12 00000014 9bd15734 9bd1563c NETIO!KfdClassify+0xd8
9bd15618 8075effb 00000014 9bd15734 9bd1563c NETIO!StreamClassify+0x94
9bd15744 8075f436 fe1fd800 00000014 9bd1576c NETIO!StreamCommonInspect+0x19b
9bd15770 8ccf74c7 fe1fd818 fe160b00 a264ed98 NETIO!WfpStreamInspectReceive+0xab
9bd15798 8ccce96f fe160b08 fe160bf4 a264ed98 tcpip!TcpInspectReceive+0x52
9bd157d8 8cccf24d fe160b08 9bd157f8 9bd1582c tcpip!TcpTcbFastDatagram+0x2ca
9bd15838 8cccd686 8572df40 00160b08 9bd1589c tcpip!TcpTcbReceive+0xf8
9bd15890 8cccf099 8572df40 85720000 00000000 tcpip!TcpMatchReceive+0x1ec
9bd158d8 8cccf0ff 8572df40 85720000 85720018 tcpip!TcpPreValidatedReceive+0x22d
9bd158f4 8cccdaa0 8572df40 85720000 9bd15930 tcpip!TcpReceive+0x2d
9bd15904 8cce5bfb 9bd15918 c000023e 00000000 tcpip!TcpNlClientReceiveDatagrams+0x12
9bd15930 8cce5628 8cd3cebc 9bd15984 c000023e tcpip!IppDeliverListToProtocol+0x49
9bd15950 8cce5a78 8cd3ccd0 00000006 9bd15984 tcpip!IppProcessDeliverList+0x2a
9bd159a8 8cce7290 8cd3ccd0 00000006 00000000 tcpip!IppReceiveHeaderBatch+0x1eb
9bd15a38 8cce3798 86573400 00000000 9bd15a00 tcpip!IpFlcReceivePackets+0xbe1
9bd15ab4 8cce30a9 86572420 85a88978 00000000 tcpip!FlpReceiveNonPreValidatedNetBufferListChain+0x6e3
9bd15adc 806d10b0 86572420 85a88978 00000000 tcpip!FlReceiveNetBufferListChain+0x104
9bd15b10 806c3d25 00573af8 85a88978 00000000 NDIS!ndisMIndicateNetBufferListsToOpen+0xab
9bd15b38 806c3c9c 00000000 86573008 86177388 NDIS!ndisIndicateSortedNetBufferLists+0x4a
9bd15cb4 8060457f 85814368 00000000 00000000 NDIS!ndisMDispatchReceiveNetBufferLists+0x129
9bd15cd0 8062fccd 85814368 85a88978 00000000 NDIS!ndisMTopReceiveNetBufferLists+0x2c
9bd15cec 8062fca4 86572c10 85a88978 00000000 NDIS!ndisFilterIndicateReceiveNetBufferLists+0x20
9bd15d08 9465cc13 86572c10 85a88978 00000000 NDIS!NdisFIndicateReceiveNetBufferLists+0x1b
WARNING: Stack unwind information not available. Following frames may be wrong.
9bd15d30 9465d22f 86177388 86188700 94661108 Teefer+0xac13
9bd15d60 9465d494 8618b7c0 87792358 00000000 Teefer+0xb22f
9bd15d7c 81e0c01c 94661108 97fe8bf9 00000000 Teefer+0xb494
9bd15dc0 81c74eee 9465d420 94661108 00000000 nt!PspSystemThreadStartup+0x9d
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!StreamGetCalloutContext+d4
8075fa37 833800 cmp dword ptr [eax],0
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: NETIO!StreamGetCalloutContext+d4
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 49e0209d
FAILURE_BUCKET_ID: 0xD1_NETIO!StreamGetCalloutContext+d4
BUCKET_ID: 0xD1_NETIO!StreamGetCalloutContext+d4
Followup: MachineOwner
Bug Check Code 0xD1: https://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
The BSOD is probably caused by teefer.sys driver. Based on searches, I found that it belongs to Sygate firewall driver system driver. So, either you update it or you remove this software. You can also contact its vendor/developer for assistance.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Problems installing Dreamweaver on Terminal Server 2008

Hi,
We are running a Terminal Services server with Windows Server 2008 and have successfully installed many programs that end users can run via Remote Applications and they all work.
I have recently installed Dreamweaver on the Terminal Server, but failed at the first hurdle as I could not get it to run on the terminal server logged on as administrator. I click on the link to the program & nothing happens, when I check in Task Manager there is nothing listed in the list of applications, but dreamweaver is running as a process. If I click on it again, I get another process running, and so on...
We have a site license for the whole CS3 Design Premium set of programs and we usually run the installed program, enter the license key when prompted then all other installed CS3 programs run on that workstation. However, I cannot even get this program to prompt for the license key.
Does anyone have any ideas where I am going wrong?
Many thanks

In the US - Adobe Install Problems 800-642-3623

Terminal Server (2008 Standard) stops communicating randomly with printers. Have to reboot TS to temporarily fix issue.

I'm using Windows 2008 Standard, remoteApp feature to run applications at our branch offices (8 locations). All of our printers are HP laserjet printers (mainly 4015 model). All are setup as IP printers. The printers at each branch
are installed locally on the terminal server using the universal PCL5 driver. A majority of the time all works well. However, randomly a printer will change it's status to "offline" on the terminal server.
When that happens the printer itself is fine. Local users can print directly to the printer, and I can access the printer and print to it remotely.
From the terminal server however, it shows that printer as offline. I can't communicate with that printer from TS or even ping that printer's IP address. I can ping all other IP's at that branch, just not the one belonging to the printer from
TS. From any other computer besides the TS I can ping the printer's IP
It's not always the same printer/branch that does this, and there seems to be no pattern to when or where this happens, and I have to reboot the terminal server to get it to talk to that printer again.
Any insight into this or a way to fix it without bringing the terminal server down would be appreciated.

Hello,
Thanks for your feedback.
Based on the situation you described, I recommend you to use a typical solution for Windows Server 2008-based Terminal Server and Networking Printing:
Connect the printers to a Printing Server located in domains.
Install the often-used printers on the client sides, using Easy Print enabled drivers on the client sides.
When the client user remotely access the Terminal Server with Printer Redirection enabled, the client printer can be redirected and work seamlessly.
Most of the community members in this forum are using this solution and the result is satisfying. This method allow the users to print with the same printers both
in local and remote sessions. For more information on Easy Print, please refer to:
Terminal Services Printing
http://technet.microsoft.com/en-us/library/cc753853(WS.10).aspx
TechNet Webcast: Terminal Services Easy Print (Level 300)
https://msevents.microsoft.com/cui/WebCastEventDetails.aspx?culture=en-US&EventID=1032355423&CountryCode=US
Is this solution acceptable in your environment? Thanks.
Lionel Chen
TechNet
Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
This posting is provided "AS IS" with no warranties, and confers no rights.

Can I install Acrobat in a Windows Server 2008 for many users?

I'm looking for a solution for my enterprise to install Adobe Acrobat in Windows Server 2008 R2, where the users connect by remote desktop. I'm looking for a form for they use Acrobat by the same form they uses now Reader. But not for all, only for some of this users.
I called a responsible and he told me that I can install Acrobat for some users in Windows Server 2008 R2, but I'm not sure if that solution will be legal.
Can I buy a special license for it or I have to buy a license for each user? How can I proceed to do this, if it's possible?
Thanks in advance for you attention!

Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
<pre><nowiki>lockPref("app.update.enabled", false);</nowiki></pre>

Error when installing SQL Server 2008 R2 after downloading

Hi -I hope somebody can help me.
I have tried to install nopCommerce with no luck. I am not able to establish the SQL database. I have tried to solve the problem for a very long time, also with no luck. Now I think it has to do with an error that come when I installed the SQL Server 2008
R2.
I have tried to load a picture here, but was denied.
with hopes for help
Regards Egil Ryengen
The error text is as followed:
Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. You click Quit, the application will close immediately.
An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer/Configuration/LandingPage/Properties.Settings: not load file or assambly "System, Version =4.0.0.0,
Culture=neutral. Public Key Token=b77a5c561934e089" or one of its dependencies. The system cannot find the file specified.
(C:/Users/EgilRyengen/AppData/Local/Microsoft_Corporation/LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx/10.0.0.0/user.co

Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. You click Quit, the application will close immediately.
An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer/Configuration/LandingPage/Properties.Settings: not load file or assambly "System, Version =4.0.0.0,
Culture=neutral. Public Key Token=b77a5c561934e089" or one of its dependencies. The system cannot find the file specified.
(C:/Users/EgilRyengen/AppData/Local/Microsoft_Corporation/LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx/10.0.0.0/user.co
Did you read hardware and software requirements before installing SQL Server 2008 R2. I guess you are missing .Net framework. AS per
This Doc
You need to download and install .Net framework 3.5 SP1 and requirement is more if you are installing express edition. Its all mentioned in link
You can also refer to
this Thread it has same issue as you are having
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

BSOD terminal server 2008 r2 after user logoff

Similar Messages

Maybe you are looking for