BSP Application does not launch in SAP R/3 4.7

Hi Experts,
We are trying to create a BSP application in SAP R/3 4.7. We are using the MVC architecture for the same. However, we are failing to launch the BSP pages. When the URL is launced either from SAP or directly in IE, the password prompt appears, after entering the user name and password it reappears again for 3 times and then throws a message invalid user name or password. This happens for all User Names. The passwords are correct though.
We have similar BSP Application in our SAP CRM 4.0 box and it works. I do not have much expertise in BSP, thus would want to know whether there are any BASIS settings that could be required in the system before we proceed. How do we know whether the system is compatible to BSP applications. We have even activated the BSP Application in SICF (Default_host -> SAP -> BC -> BSP -> SAP -> <BSP Application Name>). The current Support Pack version on the system are as follows,
SAP_BASIS Release 620 SAPKB62065; SAP_ABA Release 620 SAPKA62065.
Even if we try to launch the standard example BSP applications in the box, even they do not launch. The same problem appears. Do we need to make changes to User Roles level? All these user IDs have SAP ALL access though.
Please let me know how can I sort this out. Also let me know if you would need any further details.
Thanks for your help in advance.
Regards,
Subhrangsu

Hi Subbie,
in transaction SICF navigate to the service default_host->sap->public->ping. Right-click and select "Test Service". If this works then the BSP runtime is working okay.
Then navigate to the service sap->bc->bsp->sap->sbspext_htmlb and try the same there. On this service you will need to enter a username and password.
If all this works then you need to look clser at what you are doing.
Cheers
Graham Robbo

Similar Messages

HT1941 Hi i have recently updated my version of iTunes in order to sync music from my macbook air to my new ipod shuffle. After a successful installation the application does not launch and I am unable to oepn iTunes of access my music! Someone please hel

Hi,
I have recently updated my iTunes to the latest version in order to sync music onto my new ipod shuffle. However after a successful installation the application does not launch or open? There are no error messages. The application is just unresponsive.
I have already checked the compatibility with Safari, my operating system and checked my firewall is not blocking it - all is fine.
Does anyone have any other resolutions?
Many thanks

Hi Carolyn,
Thank you for your time and response. The trouble is I am unable to launch iTunes? I have restarted my macbook air a number of times to try and initiate the application but the issue persists and the application remains unresponsive. Will not launch?
Thanks

After upgrading to iTunes 11 application does not launch and is disrupting other programs

Hello!
I have trying to solve this problem all day:
After updating to iTunes 11 this morning, the application does not launch.
Furthermore, Windows Media Player, Win DVD8 and my Email Program fail to launch as well.
I have been through all support pages on iTunes, on support pages on the Windows 7 Forum, and I
read the answers given in the discussion.
I have tried and applied the solutions given, but none of them worked.
What happenes is iTunes tries to launch for a second, then stops, but the process keeps running
in the task manager.
All methods through MSCONFIG failed. Uninstalling and re-installing (in the correct order) iTunes, related
programs and QuickTime failed as well.
I am on a Windows 7 Home Premium 65 bit desktop computer.
Up until the update this morning everything was running fine.
Any suggestions are welcome.
Thank you very much in advance.

Solved it.
I had a program running in the background, which did not get picked up by MSCONFIG.
I looked at the services on CCCleaner and there they were, many instances of this program, slowing the
computer down and preventing other programs (including iTunes) from functioning.
Turned them all off, and iTunes and all other pgms work again.

NI-CAN Bus Monitor Application does not launch

I have just installed a PCI-CAN Series-2 Card. I tested the card installtion through MAX (by running the Self Test). The card passes the test. However, when I try to launch the Bus Monitor Application, there is no response. No error message is displayed, and the application does not launch.
Does anybody know why this would occur? Something that I am missing out during the installation?
Any help will be greatly appreciated.
Thanks.

Hello,
Generally to get the Bus Monitor Application open, all you have to do is right click on the CAN interface that you want to monitor (in MAX) and click on Bus Monitor. If this is what is failing for you, consider trying the following things:
-First, make sure that you have updated information about installed hardware in MAX by pressing the F5 key.
-Run NI-Spy to see if any CAN calls are being made to the NI-CAN Driver. See information about using NI-Spy here: http://zone.ni.com/devzone/conceptd.nsf/webmain/C31BC5FB34DBC0EF86256ADF007B8A47?opendocument
-What version and revision of the CAN driver is currently installed? You check this in Measurement and Automation by expanding the Software branch and clicking on NI-CAN.
-If you can watch your
processes as you try to start Bus Monitor, does a process named nican_bm.exe ever start?
-Additionally, try starting bus monitor from the command prompt by running C:\Program Files\National Instruments\NI-CAN\bin\nican_bm with parameter CAN0 so your command is (without quotes): "nican_bm CAN0".
-If you have a 2 port card, have you successfully been able to run Obj2Obj? I'm curious if your CAN interface is working properly at all. From the NI-CAN\utilities directory, run obj2obj.exe with a correctly terminated cable connecting both ports of your CAN card.
Let me know the results of this if you are still having problems.
Thanks,
Scott B.
Applications Engineer
National Instruments

Email application does not launch

Hi,
I am using abode reader x, windows 7 & outlook 2010. When I attach a pdf to an email through the abdoe program & press attach, it reads "launching email applciation", but nothing then happens.
Can anyone assist me with this please?
I have already uninstalled and reinstalled and played with the default program settings.
Thoughts?
Thank you.

Thank you for responding.
Yes, outlook is running.
Some additional information:
Outlook & Word 2010. Excel 2000. I have a program that I have to use that is not compatible with excel 2010. I have tried to rename the mapi32.dll to mapi32old.dll, but Windows 7 prohibited me from making that change. I have also have tried to use fixmapi.exe, but the application does not run, despite the fact that I have administrator settings.
I had the exact same configuration on my previous computer (which was new, but returned for other reasons) and I was able to email from word & adobe.

What to do when an application does not launch?

My iTunes Store on my phone keep failing to launch, please help if know what to do

Force Quit.
Press command + option + esc keys together at the same time for about three seconds
Wait.
When Force Quit window appears, select application, if not already.
Press Force Quit button at the bottom of the window.
Wait. Application will quit.
More on this:
http://support.apple.com/kb/HT3411
Activity Monitor ( Task Manager)
Applications > Utilities > Activity Monitor

Citrix application does not launch in MAC using Firefox 2.0 and new version not compatible with MAC i am using.Please advice.

I am unable to launch citrix application in MAC using firefox 2.0 and when we try to upgrade Firefox it gives a mssage that new version is not compatible with the MAC i am using.
Please advice as to what can be done and the MAC i am using is a old one.

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste that into the "Post a Reply" box. (Please don't take a screenshot of your crashes, just copy and paste the ID's. The below image is just an example of what your Firefox screen should look like)
[[Image:aboutcrashesFx29|width=520]]
<br><br>
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.

App-v 4.6: Internet explorer application sequenced, when Internet Explorer is started, application does not launch

Hi,
We have this app-v application which contains an activex component in Internet explorer.
I created a shortcut on Q:\application to Internet Explorer during sequencing what works fine.
The App-v application works fine as long as no Internet Explorer is started. When it IS started, it closes directly.
Please advise.
J.
Jan Hoedt
Update: this is the app-v application log:
[01/11/2014 10:19:25:437 SWAP INF] {hap=2AF:app=Our Application 11.5:tid=195C:usr=marco}
App shut down
[01/11/2014 10:19:29:117 ???? INF] {tid=10E8:usr=marco}
An error occurred while opening the virtual registry (section: 9), rc: 07B01F0C-0000004A
[01/11/2014 10:19:29:157 ???? INF] {tid=10E8}
An error occurred while opening the virtual registry (section: 9), rc: 07B01F0C-0000004A
[01/11/2014 10:19:29:177 SWAP INF] {hap=2B1:app=Our Application 11.5:tid=10E8:usr=marco}
Elapsed time for upload: 0.109 seconds
[01/11/2014 10:19:29:532 SWAP INF] {hap=2B1:app=Our Application 11.5:tid=10E8:usr=marco}
Elapsed time for launch: 0.546 seconds
[01/11/2014 10:19:29:762 SWAP INF] {hap=2B1:app=Our Application 11.5:tid=10E8:usr=marco}
App shut down

Hello,
Add the start-up switch -noframemerging to avoid reusing existing IE sessions.
Details;
http://msdn.microsoft.com/en-us/library/ie/hh826025(v=vs.85).aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

BSP Application does not start

Hi All,
When I run my BSP in my CRM Server from SE80 it just gets hanged. Where as the same BSP works fine in another Server. Why is it so?
I have made the same BSP setting (SE80-> Utilities-> Settings) in both the Server.
I was told, that in addition to above mentioned, I would need to maintain some kind of Basis settings as well.
Could someone please tell me what this setting is?
Thanks in advance.
Regards,
Madhu

Hi Madhuyukta,
you have to set up (at least) the HTTP protocol correctly.
Please have a look at
http://help.sap.com/saphelp_erp2004/helpdata/en/56/2e453cabf4ef6fe10000000a114084/frameset.htm
You can verify the settings by calling transaction smicm and then click on the services button. There has to be a HTTP protocol with a port number > 0 and a check mark at the column "Activated". If the system runs on a UNIX platform and you have chosen a port number < 1024, the external binding has to be activated.
Regards,
Rainer

IDVD application does not launch. quits unexpectedly during loading

The iDVD application "unexpectedly quits" when being launched. What can I do to correct this? Penny

iDVD '08: The application may unexpectedly quit when opened for the first time
http://docs.info.apple.com/article.html?artnum=306290
Remember also to delete this file:
com.apple.iDVD.plist
Good luck!

Unable to launch PSE12, I sign in, but app does not launch

I double click on the shortcut, I am asked to sign in and when I do, the box disappears and application does not launch.
I have updated the PSE using the Adobe updater, I cleared the preferences file and nothings.
Any suggestions?

If you launch the editor and organizer directly from the .exe/application files do they work?

Flash Player does not launch full screen upon Windows restart

We have a Flash application file (flash.exe file) saved on the Desktop of our client's 46" touchscreen. We've created a shortcut to the application in the Windows Start/All Programs/Startup menu as we have 4 reboots scheduled during the day for this application. Upon reboot, the application does not launch full screen but if I cancel out of the application through the Task Manager and go to the Startup menu and double click the shortcut to the exe file, the application launches full screen. The size of the screen and application is 1920x1080.
Other information:
Windows XP SP3
Flash Player 10
(Please note I have fixed the Window System Error that you see in this screen shot)
Thank you for your help!

Do you have set it to Maximized ?

App-V 5.0 standalone, application executable not launching

Hi
I have sequenced Mozilla firefox using App-v 5.0 sequencer. When I publish the application in standalone mode the application and launch he shortcut the application does not launch. When i check the process i can see that the application process , in this
case 'firefox', has launched but the shortcut to the application does launch in GUI.
I did some test's on the issue and below are the results.
1) If I copy the Root file of my application and paste them some place on the desktop the executable starts to launch.
2) I opened up the bubble and saw that there is a small cross mark on the application executable, which means as per my knowledge that the application exe has not streamed , but I am using the client in standalone mode and not publishing the app from server
so the exe should not have a streaming issue.
3) I tried capturing the application in both VFS and MNT mode but it does not help.
Any suggestions what I can try or what could be the issue here.

if you are running in standalone mode... what is the source of your package. The cross means indeed that the package is not 100% mounted, so:
Add-AppvClientPackage packagae.appv | Publish-AppvClientPackage | Mount-AppvClientPackage
and try again.

Changing Settings for Adobe Crash Reporter -CS4- app does not launch

Attempting to follow instructions on http://kb2.adobe.com/cps/508/cpsid_50879.html
The application does not launch and the page has no directions on what to do then. Reinstall Photoshop?
Thanks in advance.
Photoshop 11.0.4 — 2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
Wo Tai Lao Le
我太老了

Thank you for the prompt response, guru Cox.
Deleting the com.adobe.crashreporter.plist file had no effect. I have never changed files inside any application bundle; however…
…I was able to launch the Adobe Crash Reporter successfully from inside the Bridge CS4 application bundle. The preferences were already set as desired. Comparing the two Adobe Crash Reporter app icons, I noticed that the one inside the CS4 app bundle (the one that will not launch) has its Owner set to system, while the one inside the Bridge app bundle that launches successfully has it set to myusername. Changing that ownership on the non-launching copy of the crash reporter had no effect. I had Repaired Permissions on the disk a couple of times today, with no effect.
Now I wonder whether it's more prudent to leave things as they are, inasmuch as (1) I can't even remember the last time Photoshop crashed on me (the last time Bridge crashed was in March) and (2) now I know the preferences are set as desired.
Later today I'll try re-installing Ps 11 without un-installing first, and I'll report back.
Thanks again.
Wo Tai Lao Le
我太老了

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

BSP Application does not launch in SAP R/3 4.7

Similar Messages

Maybe you are looking for