BT Infinty, Xbox 360 and a Mac book pro! Slooooooo...
Hi all,
Iv just switched from talk-talk where I was receiving around 2 mbps. I was delighted when I ran the speedtest.net and saw 37mbps with BT infinity!!
However! Everything seems so much slower with it, web pages take ages before even loading! Im running Firefox on a 2011 Mac book pro.
And to make things worse, im now experiencing serious lag on COD on the Xbox as well as the whole thing just disconeccting(NAT setting show as open).
Highly fustrating and it just dosent make sense! Could it be BTs router?? Im running everything wirelessly.
Any help would be greatly appreciated.
Thanks.
Sudadipps,
I would try the Xbox on a wired connection and see if that makes a difference, also try and check your NAT settings on the xbox. Best option for NAT is open, if its anything but that the its a router issue and some configurations need to be amended.
Remember that using multiple wireless signals halves the data received via wifi.
Example
Wifi N signal can receive upto 300 mbps
if you have say 5 devices using wifi to the router than you would do (300/5=60)
Which means each device gets a max connection data rate to the router of 60 mbps.
Also to factor in is Floors/Walls/Other wifi devices (E.g. DECT Phones) can also reduce that wifi data rate down futher
Similar Messages
-
I have 2 Macs - an iMac which holds my main iPhoto library and a Mac Book Pro which holds a subset of the library. How can I transfer photos and their metadata from the main library to the smaller 1 on the Mac Book Pro?
Link the two Macs together and use iPhoto Library Manager
Regards
TD -
I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
Any ideas ...Please!Thank you, this has resolved both the iphone and ipad problem immediately. I am concerned that I may have a problem with apps that I bought under my old AppleID as they will not be recognised. Any suggestions for this please?
-
I have a music library on an iMac and I got a new iPhone and a new MacBook Pro and I want some of the songs from the iMac library to be on my phone and my MacBook Pro and I have a new Apple ID on my phone and my Mac book pro, is this possible if so how do I do it?
Providing specifics on all the ways to do this will take more time than I am willing to spend here these days. You can do some of this with Home Sharing. You can transfer the entire library from one computer to another, If you do that you can delete what you don't want from the transferred library.
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder. If you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
You do not want to use a new AppleID. Change the AppleID on the new phone to the old ID. Purchases made with one AppleID cannot be transferred to a different one and it will be a royal pain to manage two Apple IDs.
Change iTunes Store account on an iOS device - Log out of your current account with Settings.app > Store (Settings > iTunes & App Stores on iOS 6) > tap on your AppleID. Log in with a different account. Note, turning on automatic downloads or re-download past purchases may tie the device to that account for 90 days - http://support.apple.com/kb/HT4627 https://discussions.apple.com/message/18484935 - "In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account") When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again." -
Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
AnthonyTry this Discussion...
https://discussions.apple.com/message/18783684#18783684 -
I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.
See if exporting them helps:
Exporting From iPhoto | Apple Support Communities
Gene -
I am trying to connect my old mac desktop and my mac book pro to my new mac desktop to use as monitor but it will not work??
Hi ashleydanc588,
If you are interested in more information on using an iMac in Target Display Mode, including what machines are compatible, you may find the following article helpful:
Target Display Mode: Frequently Asked Questions (FAQ)
http://support.apple.com/kb/ht3924
Regards,
- Brenden -
I am writting a document in spanish and the mac book pro changes the words to english how do I stop this
I guess you are talking about the spellchecker.
Select the text you want to be Spanish:
Inspector > Text > Text > Language > Español
Why not set your Mac to be in Spanish?
Menu > Apple > System Preferences > Language & Text > Language > drag Español to the top of the list
Peter -
Today, after printing normally, wanted tp print another page with oki ES3640a3 and epson 7900 too.
received the message that the printer stopped, and than
"client-error-not-possible"
and
"/usr/libexec/cups/backend/usb failed"
can anyone help, I am a professional photographer and cannot miss the epson 7900.
I received the messages on my imac OSx 10.5.8
and my mac book pro OS Lion
thanksHi, did you restart the printers?
Is there a stuck job in them?
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
Choose System Preferences from the Apple menu.
Choose Print & Fax from the View menu.
Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."
As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
Why wont my contacts from my iphone and my mac book pro match
why wont my contacts from my iphone and my mac book pro match up
Are you merging the contacts under iTunes > Info, choosing to Sync Contacts, then hit 'Apply'?
-
Hello, I have an Apple TV, and a Mac Book Pro X Lion 10.7.5 bought it on March 2012. But there is no AirPlay how is it possible? Where do i get it?
Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button. -
If one buys pages , can i download it and run it on my desktop AND my laptop or do I have to buy it twice? its only me using one machine at any one time. (Have recently purchased a second hand iMac and secondhand Mac book pro 17")
I have a couple or dozen or so excel spread shheets that I use origionally created in M/s Excel v.5.0 ( yup some time ago although have run and updated them on office 2007 perfectly etc. AND numerous word files that I refer to. I have also run these files using Open Office on a small 13" mac Book Pro. successfully.
I have now decided to change my personal use computers > macs.
Ok, so in summary then i think you kind guys are saying:
(1) That if i buy Pages & Numbers or even iworks which is Apple's suite of such programs i believe, then I can download and Run these apps /programs on each my personal mac computers whether they be my second hand Imac or second hand 17" mac book pro. ( basically i have purchased these so that I am converting to the "Apple Side" and can use the Imac desktop while at home and Mac book pro when out and about) , under the one purchase and one licence.
(2) The decision as to whether to Buy M/s Office for Mac v Pages & Numbers or the iworks suite is that if I have lots of MACROs in my existing files written in M/soft that it would be better to go for M/s Office for Mac. I understand that Macros are the automated thingys ?? I have formulae obviously inthe fairly simple spread sheets but not aware of any macros. So I guess that means ~ I could purchase either product by the sounds of it. yes? Are there any other obvious things i need to consider?
Other INFO:
Also, I have snow leopard on one system and Maveric ( pretty impresive!) on the other. i am slightly reluctant to upgrade the snow leopard o/s as I would have to upgrade the paralles software and probably Windows software as well in order to run an old Kitchen, drawing program that I use occaisionally. I know that one should be able to partition / and Boot camp but I really don't want to do that. I feel at this stage its not worth payingtoi up grade all these bits of software for something I rarely use. But I am open to anyones comments / views.
Thanks. -
HT201205 Can I connect mi I phone 5 and my Mac book pro by Bluetooth
Can I connect mi I phone 5 and my Mac book pro by Bluetooth
Only to use Internet tethering. No file transfer.
-
I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?
I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem. -
MAc book pro. I have downloaded and installed os x yosemite now mac book pro will not start? How long should it take? Is there something wrong?
The 2 computers here took about 45 minutes to an hour each.
The best thing to do is give it more time. If it gets too ridiculous, shutdown using the power button and then restart. Check menu/About This Mac to see if it is installed.
Maybe you are looking for
-
My iPod shuffle first generation is not recognized by iTunes
I have recently upgraded all my macs with the latest software. My old shuffle is no longer recognized by iTunes (it shows up in the finder). How do I change the musiic on It (sync)?
-
Accounting Document not updated in BKPF for JV by J1IH
Hi The user posted JV through transaction code J1IH. The document number is updated in table J_1IPART2 but when the user is trying to see the same document in FB03 we are getting the error message as "the document is not exist or not archived". And w
-
Convert Column in Table to Separate Table
I inherited a table with spaces in one column. I would like to script this out to produce a new table with existing data. So essentially I have the following: ID FAQ MODELS 1 faq1 model1 2 faq2 model2 model1 3 faq3 model3 model2 model1 (Spaces in mo
-
Control to create or change material master
I want to let a group person to create or change material maters only with material group 16. I found an auth. obj. M_MATE_WGR, and set activity as *, while activity goups as 16. But the nothing happened when I change a material with material group 1
-
UCCX 9.0 CAD Logout non-activity time
I'm trying to find a way to automatically log agents out of CAD after they've been sitting idle for a certain period of time. I know this exists from seeing it at previous jobs where I was an agent. I've searched for any articles or forum posts I c