Bubble Chart drill down issues

I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
The problem is with drill down
I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
2. All bubbles are of same color.
Is it possible to overcome above two limitations when using data in range option?
Thanks

Hi Tarun,
as a workaround you could define a special area as mapping area for the X-Y-chart.
This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
Hope this helps,
best regards
Heiko

Similar Messages

  • Xcelsius Bubble Chart - Drill Down Issues

    Hi ,
    Product : Xcelsius SP 3
    I have a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings.
    The problem is with drill down
    I want to drill down to a X-Y chart when I click on bubbles. Each bubble click will drill down data into that X-Y chart as a pop up. I know how to do it as I have done it in the past with other components.
    But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
    However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
    1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
    2. All bubbles are of same color.
    Is it possible to overcome above two limitations when using data in range option?
    Please help if someone has encountered this issue. There has to be some solution for this.
    Thanks,
    Tarun

    Hi Tarun,
    as a workaround you could define a special area as mapping area for the X-Y-chart.
    This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
    Hope this helps,
    best regards
    Heiko

  • Bubble chart drill down

    HI All,
    We have 4 levels like(Continent,Country,State,Dist). Our business Req is like drill down from entity at  one level to another entity at the following level.Each Entity has one to many relation ships with entities in the subsequent levels.
    For Ex: One Continent will be linked to many Countries etc..
    We are trying to find a solution where a click on particular continent will point to a dataset / Range of values.....
    Could any one tell us how to define a range of values....
    Thanks In Advance
    Nithila

    Hi Nithila Siva  ,
    This is quite same as all other chart drill down.
    Here is the explanations:
    You have 4 levels drill downs :Continent,Country,State,Dist that means you can have 4 bubble charts in the canvas.In the First chart display all the continents(ex: Asia,Africa etc..) select asia from the first chart it should display all the contries in the ASIA (india ,pakistan etc..) in the second chart and follow the same for rest 2 charts.
    How can we do this:
    From your raw data you need to filter the data and point it to different charts. you can do this by writing formulas in the excels ex : point the data of all the continents in the first chart and in the properties tab-> enable drill down->select row-> in the source give all the continents and point the destination to one particular cell,so if you select a continent that value will come and sit in the destination cell and then you have to write formulas comparing the destination cell.
    Hope this helps.
    let me know if you need any explanation on this.
    Cheers,
    Sudharam

  • Issues with multilevel pie chart drill down with push button

    I am new to Xcelsius. I am trying to build a multilevel pie chart drill down (one pie chart drilling down to another etc) and I am able to achieve that. Now I want to add a Back Button using Push Button so that I can go up.  When I preview, the Push Button goes into two state and I have to double click to go back.  Can anyone tell me what I am doing wrong. I am using the latest Xcelsius. [The source code is here|http://www.woofiles.com/dl-195360-3lTyVM8Z-piechartdrilldownwithpushbutton.xlf]
    Thankyou.

    Hi Murali
    This is exactly the same what i tried to do,
    Drill down to 4 levels State -> City-> store etc with 4 pie charts and similar push button to close each level to
    go back to previous chart, first run from 1 to 4 works fine, then after closing all the levels and when i am at the pie chart 1
    if i click any pie slice it will jump to Pie chart 4 straight,
    I tried tracking the issue, all i could find is some how the previous dynamic visibility values are back even after erasing
    the data with the PUSH button (Destination cell insertion with blank or 0).
    did you find a solution for this issue ?
    Thanks
    Chandra

  • SharePoint PPS Hide null or blank value in performancePoint chart drill down.

    Hi,
    I am using SharePoint Performance Point Service. Hide null or blank value in Performance Point chart drill down.
    Thanks & Regards
    Poomani Sankaran

    Hi Hyaron,
    I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
    from the Grouping Pane in the Report Designer.
    How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
    Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

  • SharePoint Performancepoint Analytic chart drill down

    Hi,
    Anybody can tell me?
    In SharePoint performance point analytic chart drill down.
    The drill down showing all the dimensions from the datasource but instead of that. I would like to show only the required dimensions only. How to configure it?
    Is it possible?
    Thanks & Regards
    Poomani Sankaran

    Hi Poomani,
    According to your description, my understanding is that you want the drill down to show only the required dimensions.
    Here is an article about this issue, please check if it is useful:
    http://denglishbi.wordpress.com/2012/03/28/using-perspectives-with-performancepoint-services/
    In addition, as this issue is related to SSAS, I suggest you create a new thread on SQL forum, more experts will assist you with this issue.
    SQL forum:
    http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • IE7 Drill down issues

    Hi All,
    we are having problems in disco viewer regarding the drill down issues when uisng the IE7, and i installed Jinitiator 1.3.1.26 and 1.3.1.28 and followed the following procedure based on the research i have done but still no results.
    In IE7:
    Tools, Manage Add-ons, Enable or Disable Add-ons
    Show: Add-ons that have been used by Internet Explorer
    Click on "shockwave flash object(flash9e.ocx)"
    Click Disable, Okay
    Restart Internet Explorer
    Please any help will be great.
    Thanks

    If you are going to go through the effort to apply 10.1.2.2 patchset, then you might as well apply 10.1.2.3 patchset (the patchsets are cumulative) and the latest Discoverer cumulative patch. The issue is fixed there as well.
    Note 237607.1 ALERT: Required and Recommended Patch Levels For All Discoverer Versions
    There was a one-off patch that only supplied a new javascript file (BIPopupMenu.js) for the version you are on. That would be a quick fix, but again I would recommend the latest patchset to avoid many other issues you may face on this version.
    Regards,
    Steve.

  • Chart drill-down support

    Hi, guys
    Is chart drill-down supported for the web app  in CR 2008/CR XI  and how is it activated ?
    regards, TST

    Hi
    I'm  using CR XI R2 for the web site
    The drill-down feature works fine in the preview mode in CR 2008 but not in the CR viewer. at the web site.
    I sort out the way to activate the zoom feature by set autodatabind  property to false.
    But I´m not able to activate the drill-down feature for the chart at the web site
    regards, TST

  • IE7 Drill down issue

    Hi
    I'm using discoverer
    OracleBI Discoverer 10g (10.1.2.2)
    Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25)
    Did any one come up with a solution for the "drill down issues when using IE7" ? I have tried the patchset in the forum but of no use.
    Thanks again

    Hi
    Are you using Java or Jinitiator and which version? Do you have other users on IE7 who are able to run ok? Then you might want to look at the operating system. Are we talking XP or Vista?
    What we need to do is rule out various causes one by one. Then if all else fails you should raise a service request with Oracle.
    Back in 2007 I posted something about drilling and IE7 on my blog: http://learndiscoverer.blogspot.com/2007/03/discoverer-and-ie7.html
    Here is the gist of that post: It seems Oracle have released a patch (5758865) , available on MetaLink, with the fix for IE7. This is a one-off patch and requires a password which means you will have to raise a service request and tell Oracle you are having trouble drilling in Viewer when using IE7. This patch is applicable whether you are using relational or OLAP modeling. The downside of this patch is that it can only be applied on top of 10.1.2.2. You can get the 10.1.2.2 patch (4960210) also on MetaLink. Be warned though that 10.1.2.2 is not a small patch. It is 1.6 GB in size and is a full upgrade of the 10.1.2.0.2 application server.
    Is this one of the patches that you tried?
    Best wishes
    Michael

  • Limits the PerformancePoint Analytic Chart drill down dimensions

    Actually my requirement is, how to limits the Performance Point Analytic Chart drill down dimensions.
    I am using SQL Server 2008 R2. Is it possible to achieve it in SQL Server 2008 R2 without 
    Perspective?
    I should not change my system from SQL Server 2008 R2 to SQL Server 2012 for
    Perspective.
    Is there any other way to achieve it.
    Thanks in advance.
    Thanks & Regards
    Poomani Sankaran

    Hi Poomani,
    In your scenario, you create a Performance Point Analytic Chart, now the requirement is that limit the Performance Point Analytic Chart drill down dimensions, right?
    As you know, to limit the drill down dimensions, we can created a perspective in the cube that limited the visible dimensions to those couple of dimensions. In your scenario, you said that you need change my system from SQL Server 2008 R2 to SQL Server 2012
    for Perspective, right? We can create a Perspective on SQL Server 2008 R2 version. The links below might help.
    http://technet.microsoft.com/en-us/library/ms345316(v=sql.105).aspx
    http://www.jamesserra.com/archive/2011/06/performancepoint-wish-list-change-a-datasource/
    If I have anything misunderstand, please point it out.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Drill down issue in bubble chart

    Hi all,
    I have 2 series, which showing project wise value . I want to see details info about that particular project. Problem is that when i map source and destination in drill down for 2 different series.It will not allow to map source data to same destination for 2 series .Because of that drill down not working properly.
    Pls suggest me how to solve that problem.
    Regards,
    Anish

    Hi Anish,
    There is "Series Names Destination:" parameter on Drill-Down (Insertion) Tab of Bubble chart component. By using that parameter you can retrieve selected serie. Via that value you can extract selected serie's selected value and drill down to required selection via some excel formulas like index-match or vlookup-hlookup. I hope that solves your issue.
    Regards,
    Ahmet

  • PerformancePoint Chart Drill Down Menu Display Issue with Chrome v40

    We have performancepoint dashboards which used to display perfectly in Chrome. The last update of Chrome (v40) has introduced the following issue:
    Whenever the user right clicks on the chart the drill down menu displays erroneously on top-left section of the page. The drill down menu should appear exactly where the user right clicks but it does not.
    Any other person faced this issue and can recommend any fix for that? We are stuck as most clients have now updated Chrome browser and tweaking Microsoft implementation will not be a good fix for long term.
    P.S. there is no such problem with FireFox (35) & IE (9+) and Chrome (v33)

    Hi guys,
    I kind of lost track on this post. I checked that for most of the components, as soon as we use some or the other methods to overwrite with blanks, the components reset wonderfully, except when using 'Drill'.
    Drill feature of a chart required me to execute the query again to reset it.
    To prevent this, have changed the requirement to provide transparent push buttons on X axis for drilling down to the next level.
    Thanks for the inputs.
    Regards,
    Velly

  • OBIEE 11.1.1.6 Paretto Chart drill down

    A Pareto chart when created using OBIEE 11.1.1.6 drills down to the incorrect hierarchial map. This was a bug with OBIEE 10g:
    BUG:8769813 - DRILL DOWN IN PARETO GOES TO WRONG CHILD
    NOTE:517727.1 - pareto charts
    It was originally an issue with the use of Corda charts. This was supposed to be fixed with the move to OBIEE 11g but it does not seem to be so in our case, since we encounter the same error.
    Original OBIEE 10g error: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?_afrLoop=738674755173621&id=1200914.1&_afrWindowMode=0&_adf.ctrl-state=k53hrt132_215
    I will look around on the forum, but any insight would help

    I will try and explain the sequence of occurances on an Oracle "Sample Sales Lite" analysis, in case it needs to be recreated.
    It is a very simple analysis using the “Sample Sales lite” subject area provided by Oracle. The criteria is just company from within offices as the dimension and revenue from within base fact as the fact.
    The typical hierarchial drill path for the “Company” dimension within offices as per the RPD definition is Company > Organization > Department > Office.
    When viewed as a table this drill path works perfectly fine. When we represent the same as a Paretto chart, on clicking on “Stockplus Inc”, the output drills down to a breakdown of "Genmind Corp" instead. This is the same when viewed as an analysis and on a dashboard.
    I have seen similar occurances with bubble charts as well. Do let me know.

  • Lose chart drill-down for webi based on BEx/BICS

    Hi All,
    I have a client for whom drill-down through charts based on SAP hierarchies is an essential requirement. My research here (and elsewhere) has led me to the following conclusions:
    1. IDT Universe (.unx) can't be based on BEx query (functionality briefly appeared then was revoked with subsequent SP)
    2. The supported/recommended method for reporting against BEx query is the BICS connectivity
    3. A webi report based on a BICS (although offers nice new sap hierarchy interaction) does not support drill-down through charts
    Just looking for confirmation that I am correct...and that my reports will therefore need to be based off traditional universes (.unv), to achieved drill down on charts in webi?
    Appreciate any feedback.
    Thanks,
    Ferdie.

    Hey Ferdie
    1. Build table in WEBI Document include the Hierarchy object (0COSTCENTER).
    2. Choose the CostCenter, right click set as Selection.
    3. Now add new Blank Cell and put it near selection , enter there some text , like JUMP TO, DRILL and etc..
    4. Now select the CELL . right click , Linking and Hipper Link or Document Link, and choose there another document
       or you also can choose self document. When your linking to another webi document you can transfer to it parameters to   prompt. So Transfer the costcenter as parameter.
    The document link option available only when you run document in View mode (No rich client without JAVA). I will open OSS to SAP about this issue
    Also you can choose to open the document in current window, so then user will think that he is still in same document
    Example for link parameter:
    /portal/1110311905/OpenDocument/opendoc/openDocument.jsp?iDocID=AdJiD59b4kJKkhNpGCYT8Q0&sIDType=CUID&sType=wid&lsSpsCost%20Center%3A=Ness&sWindow=Same
    I hope this will work

  • Bar Chart Drill down getting "Insert in range overlaps with other series" # Error

    Hi friends,
    I am trying to drill down for Bar chart to Combination chart dashboard.
    I have bar chart in region wise values are  Revenue ,Net contribution,Total cost ,
    So when i was binding for those values for one destination column could be same
    in spreadsheet  then its getting below error.
    I tried formula for one destination to other columns
    in spreadsheet also but that's not allowing to formula for binding destination .
    Please kindly anybody help me out
    Thank you
    Sudhakar M

    Hi Runali,
    Sorry for late reply,the issue was not solved .
    Got another issue in BI launch pad .
    one Webi report migrated from R2 environment to BO 4.1.when open that report in BI launch pad
    working perfect but when report was edit in the query level and run the all queries its asking context selection
    If i selected all the context and run all the queries then again getting another issue.
    Why its asking Query Context in Query prompt level?
    Thank you
    Sudhakar M

Maybe you are looking for

  • Call a function with variable function name

    Hey guys, I have a func_table which maintains function names (each one makes reference to a dynamically generated stored function) I need to make a procedure that calls the functions in that table one by one using its name retrieved from SELECT func_

  • Weird emails showing in Outlook 2013 Inbox after Exchange 2013 PST Import

    Hi there, I've just done an Import PST from Exchange 2013 using the GUI, and when it is finished, I then open Outlook 2013 I am seeing a few strange emails in the Inbox. The PST's were from Outlook 2007, and were previously used in with POP mail. The

  • Project Server 2013-Tasks updates not replicating on schedule page

    Hi, We have updated the custom fields data in MyTasks.aspx page, but those changes are not updating on Schedule.aspx page evnthough those tasks are approved. Your help is greatly appreciated Thank You, Kusuma

  • Can employee master data be stored without using Personnel Management?

    Hi All, I need some help... I am working on 6.0. The company has decided to implement only Organizational Management, Time management and Training and Event Management modules. Can any one please tell me if its possible to do this without implementin

  • Right to left enable

    Who can I enable InDesgin with enable Arabic language. I downloaded from Adobe Creative Cloud.  It doesn't give me a choice to pick a languges other than English, French and Spanish. Please help?