Budget exhausted mail delivery to workplace

Hi PS gurus!
Iam having one issue, iam having 4 main WBS, hwere i want to do posting, actually iam not recieving mail from the system,as tolerance limit is been defined, while doing posting FB50, the system gives the warning message, but no mail recieving to the person responsible, i had check all the setting regarding OPS6, OPS9, but then also no mail recieving, is there any other settings to be done to recieve mail to our workplace?
plzz let me know?

Hi,
Check this link,this might help you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a9/ab7f68414111d182b10000e829fbfe/frameset.htm
then goto Availability Control Actions
Thanks,
Rau

Similar Messages

Budget Exhausted Error

Hi Experts,
I am facing a problem in Production server, related to the Budget Exahusted ,
I had created a PR & PO last months and now today when i am goint to make a change in Delivery date.
Sysetm is giving Error of Budget Exhausted...
were as we had enough budget available in WBS and important thing that we are not making any changed in amount, we are just changeing the deliver date..
Pls suggest ?

ankur_sau wrote:
Hi rkp@sap,
> run report S_ALR_87013558 and check weather you have any available budget against mentioned WBS or corresponding WBS of network.
> Also Check tolerance limits in the Proj. : SPRO-PS-Cost-Budget-Define tolerance Limits.
>
> If, Everything is ok, deactivate availability control(T-code CJBW) and do the posting.
>
> Remember, Deactivating A. Control ins not std. SAP .
>
> Regards,
> Ankur
Dear ankur.
Budget is available in same WBS, Tolerance limite is set to 100% for Error and every thing is seems ok.
we are only changing the delvery date and again saveing the PO when this error is coming..
Yes ther is option to deactivate the availablity control, but this is not solving the issue.
rgds

[Solved] postfix local mail delivery fails

Hi Guys,
on my home pc i use postfix (gmail as a smtp relay) and fetchmail for sending/receiving mails, this works very well, however sending a mail to a local user fails, I'm lost here and need your help guys.
if i send a mail like :
$>echo "Test" | mail -s "Test : local mail delivery" "andy"
The mail stays in the queue for ever...
$>mailq
-Queue ID- --Size-- ----Arrival Time---- -Sender/Recipient-------
CC82513BCA* 455 Sun Aug 3 09:53:09 [email protected]
[email protected]
Sending to external addresses works without any problems.
Here some important info/config files :
$>whoami
andy
$>hostname
box
$>cat /etc/host.conf
# /etc/hosts
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost box
::1 localhost.localdomain localhost
192.168.1.3 lbox.localdomain lbox
$>cat /etc/postfix/main.cf
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
# http://www.postfix.org/.
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/bin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/lib/postfix
# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# by the mail_owner account (see below).
data_directory = /var/lib/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
#myhostname = mail.example.com
myhostname = localhost.localdomain
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
mydomain = localdomain
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
inet_interfaces = localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
#mydestination = localhost, localhost.localdomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $pr/oxy_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
unknown_local_recipient_reject_code = 550
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
relayhost = [smtp.gmail.com]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.
# "USER HAS MOVED" BOUNCE MESSAGES
# See the discussion in the ADDRESS_REWRITING_README document.
# TRANSPORT MAP
# See the discussion in the ADDRESS_REWRITING_README document.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
alias_maps = hash:/etc/postfix/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
alias_database = $alias_maps
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#recipient_delimiter = +
# DELIVERY TO MAILBOX
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#home_mailbox = Mailbox
#home_mailbox = Maildir/
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#mail_spool_directory = /var/mail
mail_spool_directory = /var/spool/mail
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
mailbox_command = /usr/bin/procmail
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
# Cyrus IMAP over LMTP. Specify ``lmtpunix cmd="lmtpd"
# listen="/var/imap/socket/lmtp" prefork=0'' in cyrus.conf.
#mailbox_transport = lmtp:unix:/var/imap/socket/lmtp
# Cyrus IMAP via command line. Uncomment the "cyrus...pipe" and
# subsequent line in master.cf.
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
# luser_relay works only for the default Postfix local delivery agent.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#luser_relay = [email protected]
#luser_relay = [email protected]
#luser_relay = admin+$local
# JUNK MAIL CONTROLS
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
# For details, see "man header_checks".
#header_checks = regexp:/etc/postfix/header_checks
# FAST ETRN SERVICE
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#fast_flush_domains = $relay_domains
# SHOW SOFTWARE VERSION OR NOT
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
# PARALLEL DELIVERY TO THE SAME DESTINATION
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20
# DEBUGGING CONTROL
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
debug_peer_level = 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
ddd $daemon_directory/$process_name $process_id & sleep 5
# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
# debugger_command =
# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
# -dmS $process_name gdb $daemon_directory/$process_name
# $process_id & sleep 1
# INSTALL-TIME CONFIGURATION INFORMATION
# The following parameters are used when installing a new Postfix version.
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
sendmail_path = /usr/sbin/sendmail
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
newaliases_path = /usr/bin/newaliases
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
mailq_path = /usr/bin/mailq
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
setgid_group = postdrop
# html_directory: The location of the Postfix HTML documentation.
html_directory = no
# manpage_directory: The location of the Postfix on-line manual pages.
manpage_directory = /usr/share/man
# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
sample_directory = /etc/postfix/sample
# readme_directory: The location of the Postfix README files.
readme_directory = /usr/share/doc/postfix
inet_protocols = ipv4
# Enable smtp auth
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/saslpass
smtp_sasl_security_options = noanonymous
# Enable tls
smtp_use_tls = yes
smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination
# Max message size limit
message_size_limit = 0
Please help
Last edited by Rumcajs (2014-08-05 06:16:11)

I have solved it, and this was the problem (main.cf) message_size_limit = 0 i have set this to unlimited "0" so bigger mails not get rejected by postfix, the defualt value was 10240000 (~10 Mb) after finally checking the postfix log with journalctl -u postfix (because /var/log/mail.log) is not used anymore i found this line : "fatal: main.cf configuration error: mailbox_size_limit is smaller than message_size_limit" after setting mailbox_size_limit to unlimited "0" postfix starts to delivery local mail.
Last edited by Rumcajs (2014-08-05 06:17:23)

This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
Please guide me how I can achieve this requirement.

Hi,
yes, it is a little bit different. This is the issue.....
But I am not sure if your links will help:
1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
is about a different solution. I do not need to count the number of lines of the source message.
And the second variable is about concat line by line from unbound node to unbound node.
My issue is:
Souce:
Message line (0...unbound) ! ! ! ! ! ! ! !
.    ResultLine   (1..1)
Mapping:
=>   ResultLine1
       ResultLine2
       ResultLine........          => into UDF to an element (1..1) in one mapping operation.
So that all "ResultLine"s are included.
The result is explained in the given link for Mail attachment with UDF.
So I am not sure how to use this thread for my issue.
In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
shows where to find the button "Java section" which is not available here in 7.1
3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.
So my issue is: How to replace the Java section function with global variables in PI 7.1?
Best regards
Dirk

Mail Delivery System Errors and Securing/Protecting agains spam

Good morning all.
This morning I started recieving these:
          From: Mail Delivery System <[email protected]>
          Subject: [It] Postfix SMTP server: errors from imr-mb02.mx.aol.com[64.12.207.163]
          Date: November 18, 2011 8:51:23 AM EST
          To: Postmaster <[email protected]>
Transcript of session follows.
Out: 220 mail.cotaoil.com ESMTP Postfix
In: EHLO imr-mb02.mx.aol.com
Out: 250-mail.cotaoil.com
Out: 250-PIPELINING
Out: 250-SIZE
Out: 250-VRFY
Out: 250-ETRN
Out: 250-AUTH LOGIN PLAIN CRAM-MD5 GSSAPI
Out: 250-AUTH=LOGIN PLAIN CRAM-MD5 GSSAPI
Out: 250-STARTTLS
Out: 250-ENHANCEDSTATUSCODES
Out: 250-8BITMIME
Out: 250 DSN
In: MAIL From:<[email protected]> SIZE=3485
Out: 250 2.1.0 Ok
In: RCPT To:<[email protected]> ORCPT=rfc822;[email protected]
Out: 451 4.3.5 Server configuration error
In: DATA
Out: 554 5.5.1 Error: no valid recipients
In: RSET
Out: 250 2.0.0 Ok
In: QUIT
Out: 221 2.0.0 Bye
How this started:
Over the past couple of days to approx a week, I have seen a massive influx of Spam on our server. Spam coming in on random ex employee names that no longer work for the company.
Previous to the spam, I turned on "forward un-deliverable mail to" and set to me. The CEO was missing emails because people were not spelling his name correctly. I have actually been able tyo catch a lot of employee emails some important, others not.
In trying to make the mail server more secure, one of the features I tried to turn on was SMTP Client Restrictions, Which broke SMTP for my users. Obviously the error is mine and I need to do more research, but love some feedback on what needs to be set on the server and clients for SMTP client restrictions to work.
I know THE HOFF (mr hoffman) had information at some point to help users secure postfix, can anyone point me in the right direction, as well as any tips here on how to stop the influx of spam?
pstconf -n is here:
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
biff = no
body_checks = regexp:/etc/postfix/body_checks
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
local_recipient_maps =
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maximal_queue_lifetime = 2d
message_size_limit = 0
mydestination = $myhostname, localhost.$mydomain, localhost, mail.cotaoil.com, cotaoil.com, $mydomain
mydomain = mail.cotaoil.com
mydomain_fallback = localhost
myhostname = mail.cotaoil.com
mynetworks = 127.0.0.0/8,192.1.1.10,192.1.1.11
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/imap/dovecot/mail
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated hash:/etc/postfix/smtpdreject cidr:/etc/postfix/smtpdreject.cidr reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi,login,plain
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks   reject_unknown_recipient_domain reject_unknown_sender_domain reject_invalid_hostname reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/mail.cotaoil.com.8F44026B8E7E908CEDAAD718F486D91C8FCD693E.cha in.pem
smtpd_tls_cert_file = /etc/certificates/mail.cotaoil.com.8F44026B8E7E908CEDAAD718F486D91C8FCD693E.cer t.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/mail.cotaoil.com.8F44026B8E7E908CEDAAD718F486D91C8FCD693E.key .pem
smtpd_tls_loglevel = 0
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
mail:~ administrator$

I am not certain what you mean by immediately removing the 192.1.1.10 and 192.1.1.11, AIX servers that I use to relay admin emails to an IT address here. Some sort of a gateway implemented on a pair of IBM boxes, I might presume.
192.1.1.0/24 is in a public address space that you don't have assigned (unless you're BBN). If that IP routing leaks out, then some folks can get cranky. Or should you eventially need to contact hosts within the address space of the "real" occupants of 192.1.1.0/24, routing won't necessarilt play nice. There may well be a static IP route here, depending on the details of the router configuration, as otherwise that IP traffic would be going to BBN and not to those servers. The Internet works because folks play by the rules, when working with IP routing and DNS services. And if your predecessor used this address space (and not the likely 192.168.0.0/16 block), I'd look around to see if there were other unusual network configuration choices.
TCP port 25 is the server-to-server mail port. That's the main connection used among mail servers. Blocking that has the effect that you've discovered.
It's the clients that can also use that port that need to be relocated off the port, as the clients don't have the reverse DNS and related tests that would allow them access to that port, with various common server security configurations.
Open TCP 587 at the firewall and ensure that this port is active at the mail server host, as a starting point. You can test that with (among other tools) with a remote "telnet your.mail.server.host.name 587" command or similar; that's a primitive (but effective) (common) port test.
With the Apple Mail client, make sure the SMTP server is configured to use the default SMTP ports. Mail > Preferences > Account > Account Information > Edit SMTP Server > select the target SMTP server > Advanced > select "use the default ports (25, 465, 587)" and consider using SSL and authentication. (Apple Mail tries a few ports automatically, so the set-up can be different than other clients.)
I don't have enough space here for a full write-up on how mail or IP works, and setting up an arbitrary mail client or an IP network can be an adventure; I assumed the Apple mail client in the above. See the user collaboration services disscussion of mail services in the Mac OS X Server Advanced Administration manual as some background. (And if this stuff all looks a little cryptic, that's understandable, and you might want to consider getting some set-up help or consider moving to hosted mail services and making this stuff somebody else's problem.)

Mail Delivery System Notifications won't go away

Hi all
Tiger 10.4.11, MacBook Pro, Apple Mail.
I have several Mail Delivery Status Failure notifications that I cannot get rid of. I delete them, they go in the trash, but I go into any other mail box and when I come back to the inbox, there they are again. Right now I have 5 separate messages, all exactly the same. The problem is that I e-mailed someone something that was too big for their server and got this as a notification. But I can't get rid!
I've junked my envelope index, and re-imported and rebuilt the mailbox. I've deleted off my server (they don't re-appear there) and can't think what else to try.
Any help please?
Thanks

I have now sorted this out - any kind of deleting didn't work, but using the "cut" command from the mail menu bar did.
Thank goodness, it's been driving me mad...

TS3276 problem with mail delivery

has anyone else gotten a "problem during delivery processing" message with each outgoing message? it just randomly started happening to me this morning. it says my message was sent but the reason: Error in sieve filter: Notify mailto: recipient is not a valid address
one comes from postmaster@mac and one comes from Internet Mail Delivery....

My Wife and I both have an Ipad and an iPhone, I use an iMac and my wife a MacBook Pro.
I have this problem with all my devices.
My wife has NOT got this problem.
We both use a [email protected] email acount.
Just compared the settings:
For "Incoming server" I have p03-imap.mail.me.com
My Wife has p02-imap.mail.me.com .... and has not got this problem.
I have setup a new rule for incoming mails (for the meantime):
move all incoming emails from [email protected] to trash and delete it.
Works fine for now,......until APPLE deals with the problem.
Message was edited by: RTONLINE

How can I stop getting 30 - 50 "Mail Administrator" or "Mail Delivery Errors" from occorring in my e-mail on a daily basis

Every time I log in to my e-mail I see 30 to 50 "mail delivery" errors. This is very frustrating to each time having to delete those items. I have blocked and clicked on spam, but there is no change.

For goodness sake, it is most likely [http://en.wikipedia.org/wiki/Backscatter_%28email%29 backscatter], changing your mail password probably will not help but is a prudent thing to do, but it is actually quite unlikely that anyone is trying to use your mail account.
There is basically nothing that can be done about backscatter, as the article I linked to advises.

Mail delivery errors

Hi, recently I'm getting tons of Mail Delivery System errors. 69 today alone. When I delete them, they come right back. Many are the same email and sometimes the page is blank. Very weird. The only thing i did differently was to try and set up a rule for people to know I was on vacation. Did not work, and had hundreds of MDS errors upon my return. Have deleted the rule but still not working properly. I also have to force quit on mail often to get it to shut down. Any ideas how to clean this up?
Cheers

I've got the same problem. One thing that helped was to clean out my inbox on my ISP's server. That stopped the force quit problem, at least for now, and also stopped a problem where mail received after that Mail delivery error message wouldn't come into my Mail application. BUT I'm still getting the tons of Mail Delivery System error messages, and yes, even when I delete them, they come right back. The message, which seems blank until I double click on it to open it in a new window, was correct. One address I'd sent an email to is no longer good, which is why one of those messages would have made sense. I see that there is a Windows virus that does this, and am wondering if there might be a Mac one also???

1000's of mail delivery...notices received ? pls help

Hello, since few days, I receive 1000's of failed mail delivery....notices
mails are sent using new e-mail adresses from my domaine...it's becoming crazy and the guys at our hosting can't seem to fix it.
thanks for any advise ))

That means that a spammer somewhere in the world has spoofed your e-mail address as From. There's nothing you can do about it. Just wait it out and they'll move on to someone else's address.

Mail delivery error with 5510 e-print. updates and connection are ok. friend has same problem.

I have checked all of the updates and connections for my new printer. As far as I can tell, I've checked everything that needs to be checked and all is good. But, I still get the Mail Delivery error when e-printing. And my friend has the same problem with her new 5510 b111a. What could possibly be the problem? Regular printing, scanning and so on work fine with my wireless connection.
This question was solved.
View Solution.

So it sounds like it may be an Issue with the provided Email Address from your internet service provider, you are sending from ,
What i would suggest as a test is to create a Email account either with g mail and or yahoo, and try to send the email to your eprint account/Email, and see if it accepts the email also, make sure you have your printer set to Accept email from all users you can do this by logging into Eprint Center and then going into these settings and selecting that option
I am an HP employee.
__ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

Delays in mail delivery

I've recently noticed big delays in the time that messages show up in my Mail app, sometimes hours after they were sent to me. Today I noticed that there were at least ten messages visible to me on the mac.com web site, but I couldn't get those messages until I forced a mailbox synchronization.
Is anyone else experiencing something similar? Any resolution to this?
Thanks
Nestor

Hi Richard,
I recommend you to do few testing to narrow-down the root cause
Does this mail delivery getting delayed only for external users or its both for internal and external users ?
How many Exchange servers you have ? Is this a combination of HUB & CAS together if its 2013 or you have them Separately?
Do you have any antispam configured in your environment ?
Is there any antivirus installed in the exchange servers?
I would recommend you to run Get-TransportAgent and see the list of transport agents installed on your Exchange servers
As a part of testing i would suggest you to disable all the transport agents installed on the servers disable antivirus send a test email and check if the delay is happening or not . Also disable the exchange antispam if its installed and see if the mail
delay exists. Because mostly any transport agents acting in the categorization part might be causing this problem if their configuration has any problem.
Let us know the results so that we can proceed further.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish
Sathish

Delayed mail delivery after Rollup 6 install

After updating Exchange 2010 Sp3 to rollup 6, users are reporting that emails delivery is very slow and takes several hours to appear in Outlook. Mail delivery in OWA is instant.
The problem is fixed by disabling the Exchange cached mode option in Outlook but is not the best solution for laptop users.
Is this a known issue with rollup 6 or any patches available to fix this?
thanks.

Disabling the cache mode means it's not using a OST instead it's online with exchange all the time, if the behavior is only seen when in cached mode then it's having difficulty synchronizing the OST, if you have users with large mailboxes this could be causing
slowness.
Creating a new profile or removing and alternative to a new profile the ost and letting it recreate may solve for now, if you have outlook 2013 you can turn on cached mode but only cache 1 month of data this may be a solution for large mailboxes.
It is possible you have tipped the scales with the rollup install and are taxing the server just a little to much, is it a VM can you add Memory and see if there is some relief.
You can also try to run the exchange best practice to see if something else is going on.

TS3276 Mail Delivery Failure Msgs for emails I Never Sent

On Feb 7 I received 37 Mail Delivery Failure messages, but I never sent any of these emails. I was not even on my Time Warner email account that day. This is a recurring issue. Any suggestions?

Potential Spam. I would also change my e-mail password just in case your account has been hacked.
http://blog.onlymyemail.com/delivery-status-notification-failure-virus/

Sender receiving endless mail delivery system notifications

For the past 25 hours (or so) a friend has been receiving REPEATED messages from Mail Delivery System saying:
"This is an automatically generated Delivery Status Notification. Delivery to the following recipeints is still under way after 25.6 hour(s.): [email protected] Will keep trying and contact you if the message can't be delivered permanently."
How can I/she stop these? She eventually resent the message and all is well, but that original notification regarding the original message is still out there and driving her crazy. DOZENS of these things are being sent by Mail.

How can I/she stop these?
You can't. Eventually they'll time out and stop. Meanwhile you can create a Mail rule to delete the notices automatically.

Budget exhausted mail delivery to workplace

Similar Messages

Maybe you are looking for