Buffering table not up to date error message when creating a Cart

Hi Folks,
We are getting a 'Buffering table not up to date' error message when attempting to create a Cart. The error message only happens to the one end user ID only with the others not getting this error, therefore suggesting that my SRM org plan set-up is correct.
Has anyone come across this previously and what checks are available in the system to resolve this? As mentioned, the attribute check is okay and I have also removed the user ID from the SRM org plan and reassigned again but this has not corrected the problem. We are on SRM 5.
Thanks. Mike.
Message:
Buffering table not up to date
Method: GET_STRUCTURE_PATHS_UP of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_IDS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS_ID of program CL_BBP_ES_EMPLOYEE_MYS========CP
Method: IF_BBP_ES_PROFESSIONAL~GET_WORKPLACE_ADDRESS of program CL_BBP_ES_EMPLOYEE_MYS========CP
Form: USER_DETAIL_GET of program SAPLBBP_SC_APP
Form: GLOBAL_FILL of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
Form: APP_EVENT_HANDLER of program SAPLBBP_SC_UI_ITS
Edited by: Mike Pallister on Nov 5, 2008 11:44 AM

Please advise on this problem.  When I try to check the Approval Overview tab for these two shopping carts.
I got a dump.can anyone help me.
Information on where terminated
    Termination occurred in the ABAP program "CL_BBP_ES_EMPLOYEE_MYS========CP" -
     in "IF_BBP_ES_EMPLOYEE~GET_RL_UNIT_IDS".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 35
    of the (Include) program "CL_BBP_ES_EMPLOYEE_MYS========CM008".
    The termination is caused because exception "CX_BBP_ES_INTERNAL_ERROR" occurred
     in
    procedure "/SAPSRM/IF_PDO_DO_APV_EXT~GET_AGENT_DETAILS" "(METHOD)", but it was
     neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "/SAPSRM/CL_PDO_DO_APV_EXT=====CP "; its source
     code begins in line
    1 of the (Include program "/SAPSRM/CL_PDO_DO_APV_EXT=====CM00E ".

Similar Messages

  • "Not enough memory available" error message when accessing Shopping Cart

    Can someone please help, as iTunes and Apple support can offer none at all. When I try to purchase songs or albums, or subscribe to podcasts, I get an error message that reads: "We could not complete your iTunes store request. There is not enough memory available. There was an error in the iTunes store. Please try again later."
    This has been going on for days. I've switched to 1-click shopping, uninstalled and reinstalled iTunes, turned the machine on and off, and still get nothing. There is plenty of hard drive space, and have tons of free RAM.
    Any ideas?
    Thanks!

    I just noticed all three of us have a Dell computer....did either of you recently update your BIOS? I did and just after is when I noticed the problem with iTunes that we're all having. I realize it could be just coincidence, but I can't think of anything else that changed that may have caused this problem. I was considering reverting to the old BIOS, but have done some research (mainly on forums) and don't see any mention elsewhere of this, although alot of people mentioned going back to the old BIOS for other reasons. If I can't find anything else in a day or two, I'm going to uninstall and re-install itunes. I'll report back if this helps or does nothing.
    thanks,

  • Buffer Table not up to date error while accessing Catalogs

    Hello,
    I am getting Buffer table not up-to-date error while accessing ARIBA Procurement Catalogs.
    Initially, my Test system was pointing to Production Catalogs but now, when I changed the settings in "Define External Web Services" and pointed it to DEV Catalogs, it is failing with error: "Buffer Table not up-to-Date"
    Refreshed the Buffer already but still error not fixed.
    We already have the similar settings in other systems and there the connections are working fine
    Please advise
    Regards
    Manish Agrawal

    Hi Manish,
    Could you please check the below notes and implement the same since I had the same issue upon punching out from the catalog to SRM system.
    2041631 - Simplified Shopping Cart:Dump on Check Out From Catalog
    2086844 - Dump "Buffer table not up-to-date" on Check Out from Catalog
    In addition to the above, please maintain the portal information in the path as shown in the below screen shot
    Kindly check and let me know on how it goes.
    Best Regards,
    Bharathi

  • How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

    Screenshot of how it looks when i try to show a ms access form inside a iframe:
    http://oi58.tinypic.com/2vj4ish.jpg

  • Buffer table not up-to-date error while working with local SRM PO

    Hi all,
    We are working in SRM 7.0  with extended classic scenario.
    I faced an issue while working with local SRM PO. Iam getting a dump while doing changes in SRM PO.
    Dump says that "Buffer table not up-to-date". Please find the detail dump error below :
    http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    UNCAUGHT_EXCEPTION
    Buffer table not up-to-date
    Function: BBP_PD_ABORT of program SAPLBBP_PDH
    Form: ABORT of program SAPLBBP_PDACC
    Form: ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
    Function: BBP_ACCOUNT_INTERNAL_SAVE of program SAPLBBP_PDACC
    Form: PROCDOC_INTERNAL_SAVE of program SAPLBBP_PD
    Form: STATUS_SET_AND_INTERNAL_SAVE of program SAPLBBP_PD
    Form: PROCDOC_UPDATE of program SAPLBBP_PD
    Function: BBP_PROCDOC_UPDATE of program SAPLBBP_PD
    Method: /SAPSRM/IF_PDO_UPDATE_BUFFER~SUBMIT of program /SAPSRM/CL_PDO_UPDATE_BUFF_PO=CP
    Method: /SAPSRM/IF_PDO_BASE~SUBMIT_UPDATE of program /SAPSRM/CL_PDO_BASE===========CP
    http://cscgsapndc34.nwk.amer.csc.com:8114/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
    If anyone of you already came across this type of dump error can you please let me know what might be the possible reasons for the same .  Request your kind help in this regard.
    Thanks in advance.
    Regards,
    Kalyani

    There could be many issues..
    or some data issue.
    can you recreate the same issue you can fix it.
    it could only one incident so you should thoroghly check what piece of data is wrong.
    what actions are you doing in the purchase order.
    Note 1580496 - Purchase order Buffer table not upto date dump in change ver
    Symptom
    1.Create a change version on any Purchase order.
    2. Edit quantity of any item
    3. Dont press 'Enter key'
    4. Clickk on Order button.
    Application gves dump 'Buffer table not upto date'
    but it is very difficult to say what is the issue. request your technical resource to look your dump.
    if you recreate the issue half of the problem resolved.

  • Buffer table not up to date error

    Hi Experts,
    While i was executing the function module "BBP_PD_SC_STATUS_CHANGE_WF", it is throughing "buffer table not up to date".
    I have given the values correctly to the above function module.
    Regards,
    Chandu

    Hi Chandu,
    Please contact your basis team. Usually buffer tables will refresh alwys....
    Thanks
    Ravi

  • Buffer Table Not Up To Date Short Dump When Publishing Change Version of Bid Invitation

    Hi experts,
    We are running SRM 5.5 with Support Level 16.
    We have a bid invitation for which a user is trying to publish a Change Version. This bid contains two bid outlines, with one line item in each bid outline:
    ITEM 1: HIER (Bid Outline)
    ITEM 2: Line Item
    ITEM 3: HIER (Bid Outline)
    ITEM 4: Line Item
    However, upon clicking on the Check or Publish button, the system throws a CX_BBP_PD_ABORT exception short dump. The reason for the exception given in ST22 is "Buffer table not up to date".
    Due to organisational system security restrictions, I am unable to copy-paste the dump from ST22, so I will be typing out some of the details here.
    Transaction: BBP_BID_INV
    Program: SAPLBBP_PDH
    Screen: SAPLBBP_BID_INV_1000
    Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT". The main program was "SAPLBBP_BID_INV".
    In the source code you have the termination point in line 73.
    Active Calls/Events
    (formatted below as "No: Type: Name")
    24: Function: BBP_PD_ABORT
    23: Form: ABORT
    22: Form: ITMADM_UPDATE
    21: Form: ITMADM_MAINTAIN_SINGLE
    20: Form: ITEM_F_CHECK_FROM_WTAB
    19: Form: ITEMLIST_F_CHECK
    18: Function: BBP_ITEMLIST_CHECK
    17: Form: PROCDOC_DB_CHECK
    16: Form: PROCDOC_CHECK
    15: Function: BBP_PROCDOC_CHECK
    14: Form: SSIS_DOCUMENT_CHECK_COMPLETE
    13: Form: STATUS_SET_AND_INTERNAL_SAVE
    12: Form: PROCDOC_UPDATE
    11: Function: BBP_PROCDOC_UPDATE
    10: Form: CHANGE_VERSION_UPDATES_ACTIVE
    9: Function: BBP_PDCV_UPDATE_ACTIVE
    8: Form: PROCDOC_CHECK
    7: Function: BBP_PROCDOC_CHECK
    6: Function: BBP_PD_BID_CHECK
    5: Form: FCODE_DOCUMENT_CHECK
    4: Form: FCODE
    3: Function: BBP_BID_PROCESS
    2: Form: PROCESS
    1: Module (PAI): PROCESS
    The ABORT subroutine is being called in Step 22 (ITMADM_UPDATE), at the following line:
    * parent guids have to be identical ...
    if gt_itmadm-parent <> w_itmadm-parent.
      perform abort.
    endif.
    Upon tracing the variable values in the ST22 dump, it appears the program terminates when processing line 3 (i.e. the second Bid Outline). It appears that the first Bid Outline processes fine.
    In the iteration for Line 3, the dump provides that gt_itmadm-parent contains the GUID to the Change Version document header, whereas w_itmadm-parent contains the GUID to the original Bid Invitation document header, resulting in a mismatch and subsequently program termination.
    We have tried to replicate this bid invitation in our Development environment, but when executing, both gt_itmadm-parent and w_itmadm-parent contain GUIDs to the Change Version document header, hence the program does not abort.
    Any suggestions would be greatly appreciated.
    Thanks!
    Best regards,
    Kwong How

    Hi Janu,
    For Note 1561750, I have looked at the Correction Details and observed that it makes changes to an IF-ELSE block, but will result in the same path of code execution as before. I.e., the Note changes the code from "IF a THEN b, ELSE c" to just "c", but according to my code trace, we are already executing the "ELSE c" block in its current state.
    We will look further into Note 1877600. The unfortunate situation here is that since we are unable to replicate this issue in our Development/QA environment, and the Note description does not explicitly fit the situation we are facing, we need to be very sure that the Note can address the issue before bringing it into Production.
    Otherwise, we will raise a message as suggested.
    Thank you so much for your help!
    Best regards,
    Kwong How

  • Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

    I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
    Can anyone help me sort this out? If I log in as someone else Firefox works?
    == This happened ==
    Every time Firefox opened
    == the computer shut down unexpectedly ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can o a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • Error message when creating new Pantones

    Hi,
    When I create a new pantone  then double click on it in the swatches panel I get the following error message:
    "Cannot  create swatch library. There are no swatches in the file "HARD  DRIVE:Applications:Adobe InDesign CS6: Presets: Swatch  Libraries:PANTONE+ Solid Coated.acb"
    I've checked the folder and the acb file is there so I don't understand why it is not recognising it?
    Thanks

    Hi, I have CS6 , Mac OS X 10.7.5 and for the permissions I took a screenshot of what it says.
    Where is says 'fetching' that usually says 'imac user' when i check permissions on other files, it is my login name.

  • Error message when creating a Master File

    I have finished editing a multicam clip of a graduation ceremony which is an hour and 27 minutes long. Clients are anxiously awaiting the DVDs/BR discs.
    There are six "Rotation" and one "Ribbon" titles and 21 chapter markers in the timeline. None of the chapter markers are placed in a transition.
    I'm using 10.0.8 FCPX and OS 10.6.8.
    I've tried to create Master File in order to use Toast 11 titanium to make a Blu Ray disc but I've had the following message appear twice midway through the process:
    The operation could not be completed because an error occurred when creating frame 152526 (error -1).
    Any suggestions as to what I might do to resolve this will be greatly appreciated. Or is there is another method to create a Blu Ray disc, I'd appreciate info.
    Thanks,
    Gary

    Go to Preferences and turn off Background Rendering.
    Select your project in the library and in the File menu, click on Delete project Render Files; choose All when prompted. Select your event and do the same with the event Render files. In the project use the range tool to select a short section. Try to export that as a test. Don't render before you export.
    If that doesn't work, copy the project and paste it into a fresh project. Try another export test.
    If that doesn't work, create a new user account.
    As for Blu Ray, there is a Share preset if want to check it out. Very simple menus. And the preset can only handle single tracks.
    Good luck.
    Russ

  • "Macros in this project are disabled..." error message when creating PDF files

    The following error occurs when creating a PDF file using a document that was created from a MS Word 2007 templates.
    "Macros in this project are disabled..."
    The security settings are set appropriately - it's not that. I have done everything I can think of including asking Microsoft; they say it's not them. It may not be, but I do not know how to get around it. It did not happen before upgrading my templates to the Office 2007 format.
    Has this happened to anyone else? There is no coding within th etemplates regartding PDFs. We are using Adobe Professional X.  The error only occurs when we use Adobe Pro X.
    One thing I just noticed, our templates get the following message when we go to save as a PDF using Adobe:
    Acrobat PDFMAker needs to save the file before continuing. Do you want PDFMaker to save the file and continue?

    Does it work the first time after you delete your Normal.dotm file? You may be running into the same issue that is detailed in this post Unable to open document. Please check to see if you have read permission for the above file.

  • Error message when creating...help!

    Please help.. I'm getting this error message when I try creating a PDF "error/usr/lilbexec/cups/filter/pstops failed"

    This is the forum for the free Adobe Reader and since it doesn't create PDF's, you'll need to be a bit more specific about what you are doing and what you are using. Maybe then we can point you in the right direction.

  • Warning to Error Message while creating Shopping cart

    Hi,
    How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
    Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
    Thanks and Appreciate your inputs.
    Regards,
    RK

    Hi Richy,
    The cost centre which you have maintained is locked for postings. Try to change the cost center and the warning message  should be gone.
    If you still want to chnage the message from warning to error,you can do in SPRO-->img->SRM->SRM Server -> Cross app basic settings->message control -> Influence message ctl.
    If an entry doesnt exist for this message in SPRO,make an entry in view BBPV_PDMSG (Tranx: SM30).
    See these related threads for more pointers:
    Re: Error Messages in BBP_PD
    Re: How to change an error message to a warning message in SRM
    Re: Where can I change type of message BBP_PD 083 from warning to error
    BR,
    Disha.

  • IPhone 4S will not start or charge, error message when trying to restore in recovery mode

    So my iPhone 4S shorted out the other night while I was charging it. I did the hard reset and it restarted itself. But later that evening, it turned off and wouldn't restart no matter what and would not charge. When I connect it to my computer (mac) iTunes recognizes it and says it is in recovery mode and needs to be restored. It starts the restore process and the apple logo comes up with a loading bar but then when it gets to the "verifying restore with Apple" it gives an error message (9) and then the phone goes back. Please help!

    Hey rileyec,
    I found this information about error 9:
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    via: iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If those steps do not resolve the issue, I would attempt to perform a recovery-mode restore:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Cheers,
    Delgadoh

  • "Not enough free space" error message when there is enough free space

    Last night I decided to put a few more songs on my iPod, but when I tried I got the following error message:
    "The iPod cannot be synced because there is not enough free space to hold all of the items in the selected playlists."
    I know that is a load of crap because it says I have 2.59 gigabytes of free space, and I'm only trying to put 11 or 12 new songs on there. I have checked the settings to make sure that it isn't trying to upload my entire iTunes library, and it's not. I have the latest version of both iTunes and the iPod software. I've tried restarting, reinstalling, and all that... Any suggestions?

    First of all, thanks for the replies.
    I gave it another try today; I deleted the old files and ripped them to my computer again, this time using Windows Media Player instead of iTunes. I tried transferring them to my iPod again and this time it worked. As always iTunes had to convert them to files that it could read, but then it took just a few seconds and all of them made it to my iPod.
    I don't know what the problem was the first time around. I checked the file sizes, and the largest was 4.2 MB. There were about 11 songs. It was just a typical audio CD and its total length was 44 minutes.
    I guess from now on I'll just import CDs with Windows Media Player and then let iTunes convert them so that I can have even more files on my computer. Oh well. If that's what it takes... Sometime when I have a lot of time to fool around I'll try to see if something is going wrong when I'm importing them with iTunes.
    Thanks again for the responses!

Maybe you are looking for