BUG? "Convert to DNG" is not skipping current DNG but instead converting DNG to DNG.
I selected 50k images to convert from NEF to DNG. After DNG conversion, I have it selected to delete the NEF. Among the NEF in the archive are DNGs that were previously converted by LR upon import. ISSUE: I'm seeing DNG files in the trash (mac 10.9.3) meaning LR is not skipping the current DNG files but actually converting the DNG to a new DNG then trash the original DNG. This has to be a bug.
https://dl.dropboxusercontent.com/u/37390809/dng-to-dng.mov [35MB] (in action - select DNG, "convert to DNG", DNG is made and original tossed in trash)
OK - It makes sense that LR would convert a DNG to a new DNG if it's
1) going from lossless to lossy
2) if the embedded JPG preview changes (xmp changes require JPG update OR JPG embed size has changed)
Hope that Adobe considers ammending the spec or using the spec to check for flags that would note what state the current DNG is and compare to the command given so that DNG->DNG conversion when "convert RAW files" is selected would SKIP over files that already fit the target output.
My current solution is to simply filter my library for "file type" = Raw then apply DNG conversion to this filetype effectively skipping all DNG files in my 200,000 shot archive.
Similar Messages
-
Photoshop not saving current document but temp file OK...
Hi, this is slightly difficult to explain but happened twice yesterday. We have not experienced it before and have not updated out CS6 apps recently:
Situation – Photoshop 13.1.1 x64. Mac Pro 3.33 6-core running OSX 10.6.8, 48Gb RAM. Working on a large-ish .PSD file (650 Mb) and saving to a network drive (a Drobo connected to a server) which is our usual routine and has been for years.
Problem – When I save the document and close it, the saved file (in the correct target location) shows the correct modified time and date stamp but if you open that file up again a lot of work is missing. In this instance, about the last half hours work (since the previous time I saved it). However, if you then go to File > Open Recent and choose the file name, the document opens with all the missing up-to-date work in it.
Clearly, File > Open Recent is opening a temporary document somewhere and not the saved file in the target location.
My concern is why isn't the saved file (with correct modified time and date) up-to-date? Suddenly we are having to double check every PS file we work on and save and that is not practical.
Any help greatly received.
Thanks,
TomClearly, File > Open Recent is opening a temporary document somewhere and not the saved file in the target location.
ctrl-clicking the name (in non-tabbed view at least) should indicate the actual path of the file.
and saving to a network drive
Well, as far as I know Adobe washes its hands of any such set-up and if there are issues with Photoshop and a server you are on your own. -
Hi
I am having trouble with large incoming mail attachments.
When I receive a large attachment (pDf) the useful mail preview feature attempts to show a preview of the attachment. Unfortunately this is causing a lot of trouble as some PDFs are extremely large and therefore take time to open/preview. If I right click the attachment and select view as icon, the problem with that specific message ceases as the attachment is no longer previewed.
How can I make it the default for all attachments in received messages to only be shown as a icon and not previewed?In Terminal,
defaults write com.apple.mail DisableInlineAttachmentViewing -bool Yes -
Please contact me and explain me the reason of that, asap.
Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter? -
I accidentally spilt a little bit of water on my keypad yesterday, but I dried it all off straight away and all my keys were working fine. This morning my number keys suddenly stopped working, I freaked out thinking that it was because of the water yesterday but then I realised that about half an hour before they stopped working, they were working because I used the 1 and 2. I got the keyboard viewer up to work out which keys were not working, and discovered that the number keys were not producing numbers but other symbols when typed. However now, I don't know whether I have done something else because now I can't even get other symbols when I press keys 1-9!
I've tried rebooting, and checking all the setting in system preferences.
Any help would be great!!!Hello Rdmusale,
I understand that some of the keys are not working on your notebook computer, and I would be happy to assist you in this matter!
To correct the output of characters from your keyboard, I recommend following this document on Notebook Keyboard Troubleshooting (Windows 8). This should help correct how the keys appear on your keyboard.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
IMessage not recognizing phone number but instead email. Fix?
Other iMessage users are getting my email address and not my phone number. What's wrong?
So what I had to do was sign out of messages and facetime on all of my mobile devices. Then I started signing back in on my phone and then iPad. I think there might have been something with the recent update that caused everything to sign out of iMessage with the phone number. But yeah, just sign out of everything and sign back in.
-
Revision: 21394
Revision: 21394
Author: [email protected]
Date: 2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.javaFor our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more! -
How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.
The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.
-
After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...
Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later. -
I need to restore an iphone 4 to 7.0.6 not the current 7.1
I need to restore an passcode locked CMDA iPhone 4 to 7.0.6 not the current 7.1. This is due to a mobile management application that our company uses that has not been verified to work with 7.1 yet. This iPhone is current on 5.1.0. I am trying to do the restore via iTunes and am using an old ipsw file for 7.0.6 but I keep getting the 3194 error when it tries to restore. I have tried all the "hosts" fil e suggestions but keep getting the same result. Is it no longer possible to restore an iPhone to an older version of iOS, even only one upgrade back??
Sorry, but it will only install the latest version (7.1).
-
I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Shouldn't Pages, Numbers, and Keynote show version 9.?? My MAC confirned installation of v9.0.3 and even accepted the software code. With this discrepancy, how can I determine if the latest was installed and operational? I even downloading v9.0.4, 9.0.5, and 9.1. When I tried installing these downloads it popped up note stating that a later version of Keynote was already installed.
You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse
-
I am a bit of a computer/Internet/iTunes dummy....
I am concerned about the health of my current computer but have not yet made the commitment to a new one, but:
1) How can I transfer my iTunes account to a new computer when I get one...
and
2) What can I do if my current computer suddenly implodes and I have not yet 'copied/'saved'/otherwise protected my account, as is? -- I have already had my computer crash once and had one of your people help me restore all of the paid for songs (none of the uploaded from my own collection of CD songs, of course, so I had to spend a long time rebuilding that) -- and I believe I was told you could only help me recover that material one or two times altogether, no?
WithOUT purchasing a Mach or iCloud (I actually think I have one of the later, but rarely have checked it) account, is there anything I can do to responsibly protect my account?
Thanks for any time taken on this!!!These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2 -
My iMessage stopped working when I did the latest update on my phone. I have literally tried everything to reset it. I am currently not in the US, but my iMessage has always worked when I was in wifi and my phone is still activated. I have tried to reset my network settings, my location, and even the reset all settings. When I click on my settings and iMessage it says that it is still waiting for activation... and my phone number is grayed out. I am able to recieve an iMessage to my email and that could work for right now but i'm not sure how to start a conversation the defaults to being sent from my email and not my cell phone number. please help!
Hi shanny202.
Really strange problem you have there. I have a few questions though.
Please try again and try to make the phone as a new without restoringen with you iCloud-data or backup-data from iTunes. Maybe it is something wrong with the data (strange).
Anyway, i think you should call Apple Support or visit an Apple Store, don't forgot to make a Genius Bar reservation.
You locate the nearest Apple Store here: http://www.apple.com/retail/storelist/
And here is Apples phone numbers around the world for support: http://support.apple.com/kb/HE57 -
I'm not sure if I am writing this in the correct area (this is my second attempt at posting a question), but I have a comment about a recent store experience in Sandusky, OH. I am not a current Verizon customer, but I was visiting friends and we had to go to the store to get something taken care of. First off, allow me to compliment the nice, new store. Boy, its changed over the past few years ago when I was in last. My comment is mostly directed to one specific employee. When we entered the store, we were "welcomed" by a sloppy dressed gentlemen (his clothes were probably two sizes two small), which really struck me as unusual because every other employee in the store was dressed really "casual" with nice sporty clothing and red shoes. Either way, after being entered into the computer, the gentlemen told me to wander around or have a seat in the back and someone would be with us soon. As soon as we walked away from the door, the gentlemen handed his "duty" off to another employee who took over welcoming people coming in. For whatever reason, I felt glued to him as he stood out to me. After leaving the door, he immediately went to the back of the room, hunched over a cabinet, where he stood for the next 30+ minutes playing on his phone, frowning and not speaking to anyone around him. Again, I found this unusual because everyone else was overly friendly and smiling. I finally decided to walk by and see what he was doing. It appeared that he was texting someone. He paid no attention to me whatsoever as I walked by, just continued to frown and text on his phone. I did take not of his name tag for future reference. His name was Justin. I am assuming he's the manager of the location as he was just standing around while everyone else worked. I do understand that managers aren't necessarily doing the "dirty work" of the employees, but he could have at least found some better fitting clothing (I find it hard to believe Verizon doesn't supply it), been a little friendly, pretended to be busy, and not been texting the entire time we were there. Again, the store was great, the other employees were very helpful, but the manager seemed to be doing is own little thing and it didn't put off a good image for the rest of the store. Just wanted to share my comments.
lisab101,
We appreciate you reaching out to us. We greatly appreciate the feedback that you have provided us. Please know that we will lift this up to management and the issues will be addressed.
Thank you,
RobinD_VZW
Follow us on twitter @VZWSupport -
BUG: KEYBOARD SHORTCUT KEYS DO NOT ALWAYS ACTIVATE A SERVICE (A WORKFLOW)
BUG: KEYBOARD SHORTCUT KEYS DO NOT ALWAYS ACTIVATE A SERVICE (A WORKFLOW)
When you assign a keyboard shortcut to a Service (such as a Service Workflow created in Automator) using the System Preferences > Keyboard > Shortcuts, if that shortcut key combination includes the Command key, pressing that shortcut will always successfully activate the Service. No problem there.
However, shortcut key combinations that do not include the Command key (for example, the shortcut key combo Ctrl-Shift-D) WILL NOT activate the Service in any newly opened application, until you click on the Services Menu option in that application.
As soon as you click on the application's Services Menu, this seems to bind the shortcut key combo to the Service, and thereafter, that keyboard shortcut will activate the Service in that particular app. But if you then quit and reopen the app, you'll find the Service will once again lose its binding to the shortcut key combination and will thus fail to work again.
This means that shortcut key combinations such as Ctrl-D, Ctrl-Shift-D, F15, Alt-F15, etc are not really viable shortcuts for Services, because they will not work in any newly-opened application until you click on the Services Menu in that application.
This bug thus greatly limits the shortcuts that you can employ for Services, because you can only reliably use shortcut key combos that contain the Command key. This is a fault that Apple really needs to fix. This is a very old glitch: I notice it is present in Snow Leopard 10.6.8, as well as Yosemite 10.10.1.
This bug does not apply to application shortcuts, however, or to other shortcuts in the Shortcuts Preference Pane, just to Services shortcuts (including the Mac's default Services, or any Services you make yourself using Workflows on the Automator software).
To give some examples:
The following keyboard shortcuts for Services WILL NOT work until you click on the Services Menu in the application you are using (and they will cease working again when you quit and reopen the app):
Ctrl-X
Ctrl-Shift-X
Ctrl-Alt-X
Ctrl-Alt-Shift-X
Alt-X
Alt-Shift-X
F1, F2, F3, etc
So until Apple fixes this bug, the above type of key combinations, that do not contain the Command key, are best avoided as shortcuts for Services. It is particularly unfortunate that function keys F1 to F19 do not work reliably, as these would make great single-key shortcuts to Services.
However, the following sort of keyboard shortcuts for Services, all containing the Command key, once set up will always work without fail:
Command-Alt-X
Command-Ctrl-X
Command-Shift-X
Command-Ctrl-Shift-X
Command-Alt-Ctrl-Shift-X
Command-F1, Command-F2, Command-F3, etc
So all the above can be reliably used as shortcuts to Services.
Here X denotes keyboard keys such as A, B, C, 1, 2, 3, =, \, [, etc.
Note that even for keyboard shortcuts containing the Command key, you may very occasionally need to click the Services Menu to get them to work initially in an application (notably in the System Preferences application itself). But if this is necessary, it is just required once when they are first set up, and thereafter the shortcuts containing the Command key will always work without fail.
The above was tested on Yosemite 10.10.1, but most likely applies to other versions of OS X as well, as I believe this bug is an old one. This bug is definitely present in Snow Leopard 10.6.8, because I have observed this same fault in an old Mac I have that runs Snow Leopard.
I have reported this bug to Apple, so hopefully they will see my report and act upon it. However, it might be an idea if others also report this problem of Services shortcuts not working property, to ensure that Apple get the message. You can report a bug to Apple via their bug feedback page here.Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all.
Maybe you are looking for
-
How to organize function modules & subroutines in a function group?
Hi, There are several function modules and subroutines in a function group. And the subroutines will be called by severel modules. Originally: 1. I put subroutine forms in an Include. 2. and in the function modules which will use the forms, I include
-
Dear Gurus, We have read some threads about vendor synchronization, but we still have some doubts about the strategy of the synchronization. Can anybody tell us how are you managing with this topic? I mean: 1- how do you perform the initial load of v
-
Solaris Studio 12.4 ccfe signal 11 with boost::unordered_set in C 11 mode
Using Solaris Studio 12.4 on Solaris 10 update 10 x86, the following program crashes ccfe: #include <boost/unordered_set.hpp> #include <string> int main(int, char **) boost::unordered_set<std::string> strSet; std::string str("test"); strS
-
I have external list where i want to apply multiple filter for every column like we do in Excel spreadsheet - we can filter a spreadsheet column by selecting multiple checkbox for every column. I am using Sharepoint 2010 Is this possible in sharepoi
-
When I open pdf files in Preview they open with the graphics/text completely corrupted. If I resize it to a small size it looks fine (but is too small to read). I have opened the same files in Acrobat and they look fine. I can also open them on anoth