Bug in airport app?

Why can't I login on the airport app? It keeps asking for the password... What should I do? I have re-started the airport and reinstalled the app.

If you have never set up the AirPort Express before, the default password is
public
If you have set up the AirPort Express before, you established two passwords. One is a device password to access the settings on the Express. The other is the wireless network password, used to connect to the wireless network.

Similar Messages

Looking for something in the iPad/iPhone Airport App

Hi
I have been waiting for the airport utility for iPad/iPhone to come as I frequently travel with just my iPad and Airport Express. However, I have been unable to configure it when away from home.
So, Apple has released a utility but it appears to be the most important feature for being on the road, that is, the ability to switch connection sharing (so you can hook up to a hotel system).
Is it that I can't find it or it doesn't allow you to do it. In the iPad app, I am looking for the ability to switch between bridge mode and the other two.
Thanks,
Andrew

Tesserex, thanks for the comment . Can you point to where in the utility I cna figure it to
Share a public IP address
Distribute a range of IP addresses, or
Be off in Bridge mode?
Thanks,I can't work it out.
Re: Looking for something in the iPad/iPhone Airport App
created by Tesserax in AirPort - View the full discussion
The AirPort Utility App that is available with iOS 5 does pretty much everything that the Mac or PC versions do including controlling both the NAT & DHCP services to allow you reconfigure an AirPort as a bridge.

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. Someone can fix this?

I've a "bug" with the apps downloading. This one stops at the end and stays like that infinite. The app doesn't appears normally on the homescreen. The app is on the home screen, and its downloading is blocked at its end, without showing the app like it should when it's finished downloadung. Does someone can help me and fix this please?

Hi Tom
Thanks for replying!
I had heard that these switches didn't stack unless everything was identical.
I only tried it at all out of pure desperation.
I've applied and tested every version 3 firmware in standalone mode via a console cable and xmodem.
They either never come up properly receiving decompression errors and reboot constantly in a loop.
Occasionally they stall / jam and stay there displaying the same error with no rebooting.
And twice out of 80-100 times I got it to boot to the username and password screen in standalone mode.
But as soon as I made a change it crashed and started the rebooting cycle again.

Is anyone experiencing a bug in mail app in iOS 7 ?

I'm experiencing a bug in mail app in iPhone as well as in my iPad... This bug makes all my mails unread whenever I refresh for mails and whenever I read a new mail it stays unread even if a close the app. Please help me if possible...

I've not heard of or experience any such issue.
Have you tried removing and readding the accounts in question?

Bug in an app

I purchased an app from the Mac App Store to download the "Holy Bible Audio Book" to my iMac. It worked the first day, then stopped working afterwards. It said failed download and there was no audio. I emailed the seller and still waiting for response. I finally saw one review regarding a bug in the app download. Should I call my credit card company to dispute this purchase? Or wait for the seller respond? This is the first time I make a purchase and don't expect this happen.

From what I can see, the app is free so there should be no action on your credit card ... with one possible exception. If this was your first purchase you may have had a temporary authorisation charge applied. It will be removed in a few days. See this document http://support.apple.com/kb/HT3702
Insofar as the failed download is concerned, download it again and if it fails again contact the developer.

Names and IPs in Airport App

For Airport App: In the the pictures on the Apple web site under Wireless Clients they show names. All I see are Ip addresses. I'm running on an Ipod Touch 3rd gen and looking at other Ipods and Iphones. How do I get names?

Despite the advertisement or picture, It is not possible to display the device names under Wireless Clients in AirPort Utility. Only the MAC address or AirPort ID of the device will be displayed.
Is is possible to have a Client ID or device name displayed under DHCP Clients, but you have to go into each device individually to set this up. Then the Client ID will be displayed along with other data when you select the DHCP Clients tab.

No chance for a Firmware Update for my AirPort Express 802.11n (1st Generation) with The AirPort app in my ipad 4. can anybody help me?

Hi Folks,
I wanted to re-activate my First Generation AirPort Express to Stream Music in another room. Unfortunatelly i cant Update The Firmware of the first gen airport express with my AirPort App on The ipad 4.
For my online Access i use The AirPort Express newset Generation Woche Works pretty well.
What can i do to use The Old AirPort Express for AirTunes purposes only?
Thanks in advance for your advices,
Daniel

when im searchin for available wifi connections in my house, there is a "AirPort Express e55137" Hardware. When i click on it it sais, i cant configure the Base Station with the Software on the ipad
This tells me that you do not have a 1st Gen AirPort Express. If you did, you would be able to configure the Express with the iPad.
If you have AirPort Utility 5.6 or AirPort Utility 5.6.1 on your MacBook, you can configure the Express using the MacBook.
If you have AirPort Utility 6.x on your MacBook, then you will not be able to configure the Express unless you try a workaround to install an older version of AirPort Utility on your MacBook.

Setting up internet for ipad w/time capsule, but don't have internet to download airport app. Now what

Hi all - Set up my time capsule and got the wi-fi working for my computer. Now trying to set up internet on my new ipad and have seen that I need to download the airport app onto my ipad. Problem is -- I don't have internet for my ipad so I can't download the app. Advice? (Other than . . . go somewhere w/internet)? Thanks!

You do not need the app. The TC can be setup and is setup from what you have stated.. the ipad should get internet as soon as it connects.
If you have issues.. please try the following.. setting it up from your computer.
Use SMB compatible name for wireless ie short no spaces. .pure alphanumeric.
Use fixed radio channels.. as the ipad seems to not like auto rotating channels.. fix 2.4ghz to channel 1, 6, 11 in turn.. pick the one that works best.

IOS6 bug in music app

After upgrading to iOS6 on my iPhone4 the music app no longer has a "Add all" option on the playlist/album/tracks screen.
Bug or feature?

Funny I found a LOT of posts everywhere (just google Modular) about the same thing. and it seems that it's "a feature" of the media controls in Control Centre that is not pretty well accepted by a lot of us.
Maybe it is your phone the one is not working properly or you're just writing back cause you have plenty of time.
Example:
http://forums.macrumors.com/showthread.php?t=1716667
Just do that yourself:
Go to Safari or Facebook (youtube app doesn't apply to it)
Watch a video/audio clip there
Lock your phone or whatever
open your Control Center and you HAVE to see "Safari" or "Facebook" or whatever app you last used to play media
Press on play and it will obviously not resume playing
If you are on Safari for example and still have the page with the media link active, it will show the link but not resume it; you can close the page or even close safari, and in control centre you'll see "Safari" and clicking on Play won't resume anything.
I hope you try it, and if it doesn't shows on your iPhone, then you'd better be going to an apple store and get it checked up.
once again, just for you to see this:

When I had 10.6.8, itunes would leave a left over amount in itunes apps. When I got the upgrade to 10.7 I thougt the problem would go away but it did not. There is a bug in the app system and I think it should be resolve quickly.

When I had 10.6.8, itunes would have a left over amount in itunes apps, it would show you would have 8 apps that need to be updated. I would got to up date them and there would be no apps to up date. 2 days later I would go to up date apps and it would show I have 15 apps to update when I really have 6 then it would add on more invisable apps to which is not there. There is a bug in itunes that needs to be fixed please fix this app section. I have sent letters about this before and you did not listen. I a beta tester and I hate it when my requests don't get fixed.

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

I found a bug? No apps on first page? (or !) (how to reproduce it!)

Hello dear all,
Today I finally found out how to reproduce a bug on my iPhone,
which I had already a serval times.
The Bug is not worse, it just kinda looks cool.
(I will post some links to Screenshots when MobileMe is out of maintainence)
_*Well,to the first Description of the bug*_
Sometimes after a call I put my iPhone back into my Pocket,
after taking it out again i activate the screen with the Power or Home Button,
then unlock the Screen as usual, but what is that?!
My first screen is black! There are no apps anymore?!
It only shows the status bar on the top and the apps in the Dock.
When i switch then to the second Screen, the apps appear normal there.
Back to the first, the page is still black/blank...
Then I switch to the SPOTLIGHT PAGE and I see the _Photo Library_ App.
OVERLAPPING the search field! ***?!
I switched of my screen, reactivated it, unlocked the iPhone...
EVERYTHING went back to NORMAL again O_o ?!?!
_*Today I found how to reproduce it*_
I had a phone call where I needed to search back a note on the phone
while I was still in the call of course.
Later after that call I had the bug again! But I remembered myself,
always I had this bug I locked the screen on the "credit balance notification"
which appeared on the first page (not over the call screen because I closed
the call screen before to search a note and I did not went back)
So I reprocued it, I will now go step by step, so that you can try it too:
-First activate the "credit balance notification" after every call (you need this else you cannot reproduce, I hope your provider allows you to do this)
-Now call yourself on another phone and take off, now it is important to push the home button to change to the first page! Then you can hang up.
The "credit balance notification" should appear now over your first page.
DON'T DISMISS IT!
-Deactive the screen by pushing the power button.
-Reactive your screen and unlock your phone... there it should be...
*THE BUG!!!*
-After deactivating an reactivating the screen, it should be gone again.
_*Additional and Feedback*_
Important to get this bug is to have such a notification appearing over the first page. If you know another way to get such a notification without calling yourself on another phone, let me please know.
I hope you can give me feedback and experience on this bug,
so I will send it to apple after I have some confirmations.
Many thanks!
Have a nice day

It is a notification comming from the provider. Actualy it can be everything from them, it has nothing to do with balance (neither with push notifications).
It is a notification message like this one
http://web.me.com/conterm/Downloads/iPhoneBug-Notification.JPG
Important is to have this notification "popup" appearing over the first page,
then lock the screen. Like i told you it is a bug in the iPhone OS, I just need confirmation.
Mobile me is working again, here is the bug screenshot:
_*First Page*_
http://web.me.com/conterm/Downloads/iPhoneBug-1STscreen.jpg
_*Spotlight Page*_
http://web.me.com/conterm/Downloads/iPhoneBug-SLscreen.jpg
Message was edited by: MiCoIT

Possible Bug in Mail.app

I am running a server and clients -- all at 10.4.4. The mail app on the clients Version 2.0.5 (746/746.2).
I have been tracking down errors in my imapd log file. The errors are:
Feb 5 00:18:05 EaseServer imap[23046]: IOERROR: reading message: unexpected end of file
You can find various people asking for help on this but no help. I believe I tracked this down. It is not an imapd problem but a Mail client problem.
When the client wants to add a file to an existing mail box on the server, it does an APPEND command. The "literal" at the end of the command can take on two forms: { number } or { number + }. The second is called the "non-sychronizing" form.
By default, this is supprted by imapd (and advertised) and used by the client. In this case, the client is suppose to not wait for the server to reply with the "go ahead" response but just blast the message across the wire. Well... it does not. Instead, you get a pregnant pause and eventually imapd times out and rejects the request. The client, eventually, may even crash from all this but, for sure, it will provide a very poor user experience.
The work around I did was to download CyrusIMAP from the OpenDarwin.org. In cyrus_imap/imap/version.h, the CAPABILITY_STRING advertises LITERAL+. If that is removed, then imapd does not claim to support it (even though the bug is in the client). This prompts the client not to use it. And things appear to work much better.
I know virtually zilch about IMAP protocol, cyrus, Mail.app, or imapd -- so, someone needs to verify all this.
The thing that is curious to me is why I hit the problem and others seem to be working fine. There are a few people that have noticed the problem but, they seem to be the exception and not the rule...

I have tracked down my problems to a call to sasl_decode in prot_fill (in imapd).
To recap: I am getting IOERROR: unexpected end of file in my imapd log file. The client interface is also slow and sometimes crashes.
It turns out that if the client has Kerberos GSSAI authentication and the client tries to do an "APPEND" command (which is what the imap protocol uses to add a message to an existing mailbox), the APPEND frequently fails (but not always). The rest of my Kerberos stuff appears to be fine.
The APPEND is sent across to the server. The client can be set up to do LITERAL+ or not. The client sends all of the message in either case. The server reads all of the packets. Usually the first packets go through the sasl_decode and result in valid text. But after the first block (4096) or so of data, the remaining data is lost and sasl_decode reports back that there is only two valid characters. No errors are reported back (that I am aware of).
I ended my quest at this point last night and I probably will not pick it up again. For now, I can work around the problem by switching to plain authentication and just set up a VPN before using mail.
I hope this helps whoever follows in my footsteps...
Perry

IPhone 5 two bugs in photo app.

Sorry, don't know where to submit bug reports... hope this place is okay.
Bug #1 - photos are not properly fit to screen. To see this, take a screenshot of the home screen, or, say, of your favorite video game on the iPhone 5. Now, look at that photo in the photo app, and double-tap it as needed to "fit" that photo to the screen. You'll notice black space at the bottom of the photo, and the top part of the photo is off-screen. So, if you took a screenshot of the home screen, the "menu bar" (or whatever it's called) will be off-screen.
Bug #2 - the "cancel" button that comes up in the delete menu doesn't work. Try to delete a photo, then hit the cancel button. You'll see the button is only barely functional - only the top sliver of the cancel button seems to accept input.

#1 was in reference to screenshots, not camera photos. Screenshots should obviously be the same aspect ratio as the screen. In any event, fitting a photo to screen (even if it has a different aspect ratio) should not cause part of the photo to go off-screen. I'm not talking about "letterboxing" here... the black space in question is ONLY on the bottom of the photo, not the top - the top part instead goes off-screen. That is definitely a bug, and I have verfied that I don't get that bug in on my old iPhone4 (updated to iOS6.) I don't have a 4S so I can't test it on that.
I have also verfied that bug #2 does not happen on my iPhone4.

Bug in Calendar app

There is a bug in my calendar app
It is synced to facebook, and i have wp 8.1
After selecting 'not going' for an event, the event got deleted from the app, but it keeps on showing on the live tile
I tried switching off and on many times, but w after deleting the event from calendar, it shows itself on the live tile

Hi kine_
Thanks for reporting the issue to us.
I can repro the issue with Windows Phone Runtime app:
I will report the issue internally to our seniors to see if this is a known issue.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BUG REPORT: Social App v1.3.237 poling data connec...

Social (version: 1.3.237) on Symbian Anna (Software Version: 22.014) on Nokia N8 (Product Code: 0599001)
Prior to opening the Social app data connection usage is normal, but when the app is closed again the data keeps being poled. Every few seconds the data connection (either 3G, GPRS or WiFi) will disconnect and then connect again. I have been able to repeat this bug 10 out of 10 times including after reboots of the phone. The only thing I have not done is hard reset the phone or re-install the firmware.
This version of the software was installed using Software Update on device. This install was straight after the Software Update install of two part Symbian Anna update which appeared after updating the device FW from PR1.2 to Symbian Anna. The two part update included the install of Internet Radio.
I hope this information is of use as the version I am having issues with is a public release and the only way to stop the data connection poling is to reboot the device. As soon as you open and close the Social app again the data connection poling starts again. Whilst the app is on the data connection is constant on as expected.
N97 (Product Code: 0585262 (Voda UK)) FW 12.0.026
95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
If a post by a user has been helpful, please click on the Kudos! button.

gabriele339 wrote:To close all the persistant data connections you need to kill some processes with a task manager (I use the free signed ActiveFile but its official website is now off so I don't know where to retrieve the installation unsigned file)
How about:http://thenokiareview.com/applications/symbian3-applications/
Happy to have helped forum with a Support Ratio = 42.5

Bug in airport app?

Similar Messages

Maybe you are looking for