Bug report: Screen times out when other side is no...

Bug report: Screen times out when other side is not sharing video. The phone locks and of course the other party cannot see anything. Please fix.
Using WP 8.1.1 Developers Preview.

Hi and welcome to the Skype Community,
Can you please share which platform and which device you are on?
Also are you referring about a one-way video call here where only you are sending video, but the other party doesn't send their video back?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Similar Messages

  • How can I change the screen time out when using the notification screen in zoom on the IPhone?

    To clarify, when I am using Zoom and using three fingers to move around on the notification screen.  The screen goes blank even if I am actively moving my fingers across the screen to read the screen.  Why does the notification screen not recognize active movement and go blank after a peiord of time.  I have very limited sight and rely heavly on SIri, text speak, and Zoom.

    Hi BlindmanJay,
    Thanks for using Apple Support Communities.
    iPhone: About General Settings
    http://support.apple.com/kb/ta38641
    Set the amount of time before iPhone locks
    Choose General > Auto-Lock and choose a time.
    Hope this helps,
    Mario

  • 9iAS rel 2 SLOW and report times out when running !! HELP !

    Hello,
    I have 9iAS installed on Win 2K machine SP 2.
    I have done the BI install with the infrastructure in a separate home.
    I have 524K RAM.
    EM is VERY SLOW (as per usual).
    I have rebooted the server a few times - still slow.
    When I try to run a report it times out just bringing up the parameter page !
    If I try to kill the report I run into BUG 2544383 which is a fat lot of use ....
    This 9iAS is absolute garbage - how can Oracle tell us to migrate our existing developer forms & reports to web-deployment from client server if this sort of performance is going on ? This is still in development - if this was a production machine this would be TOTALLY UNACCEPTABLE !!!!!
    Does anyone from Oracle actually respond to these threads or are they too busy writing bugs for the next release of 9iAS ?
    Seriously though, if anyone has some workarounds for these issues then please let me know.
    Thanks

    We got aound the ADMN error by manually starting the components that were down in Infrastructure first then the ones in the BI instance all thru EM.
    FYI Oracle said this to me about recommended h/w :
    The Installation Guide for iAS sets the minimum requirements for installing iAS as:
    Infrastructure 512Mb RAM
    Mid Tier install with 4 or more components 512 Mb RAM
    Please remember that these are minimums only and are not the recommendations for anything larger than a small workgroup installation. The main points to remember are to install the OS on a seperate physical disk from the Applications and to have as much RAM as you can beyond the minumums. But even this approach has its limitations and so you may then have to consider different approachs to maximising scalablility. It is also not recommended to have the Infrastructure and Mid-tier installed on the same machine for larger systems as you are more likely to encounter resource limitations due to the different installations serving different purposes.
    So we are going to go with your minimum 2 Gig with 7 gig swap file I think.
    I think we may go for a 3-server setup.
    one with Infrastructure and Portal on it.
    The other 2 with BI installs on them with them probably running in some sort of cluster (either hardware or software cluster). All with 2 gig RAM.
    I still don't know why somtimes my reports hang - I think it may possibly be BUG 2544383 which to me is a major issue as a lot of our reports are PDF as users print them out. But essentially it screws up the AS and invariably I have to either restart the WHOLE instance or reboot the server ! NOT very good for when I want to go Live with this !

  • Why is my ipod shuffle pausing my music when the screen times outs?

    My Ipod shuffle is pausing whenever the screen times out...please help.

    Make sure your headphones are plugged in all the way, meaning you cannot see any of the silver still showing from the headphone's plug. 
    A feature of the Nano is to put it to sleep when the display goes out and it does not detect any headphones.
    B-rock

  • When I try to open certain slide shows, my computer gets the spinning wheel and times out. Other slide shows open fine. What am I doing wrong?

    When I try to open certain slide shows, my computer gets the spinning wheel and times out. Other slide shows open fine. What am I doing wrong?

    Hard to say but most likely you are not doing anything wrong but have some library corruption
    What version of iPhoto? Of the OS?
    backup your iphoto library, depress the command and option keys, launch iPhoto and rebuild your database
    LN

  • System is showing time out when run in background

    Dear all,
    We have two systems: One R/3 and EBP. We have made one report where the remote function module will be called from R/3 to EBP. There are 4 lakhs data in SAP. We are sending 10000 data as package in internal table and getting the corresponding output. But the system is showing time out when the report has run in background. Can you please suggest how the process can be improved so that the timeout can be avoided.
    Thanks and regards,
    Atanu

    Hi,
    Try to fetch records in smaller chunks and process them.  For example, if you are trying to fetch records for one year, instead of single query, try to fetch in 12 sets for each month.  Fetch first month and process the records and put them in the output internal table.  Then go for next month and so on.  Anyway your program is running in background.  There will not be any user complaint also.  The solution might sound bit funny.  But it works.
    Regards,
    Hema

  • Screen Time Out

    PlayBook times out, continues to act like a stupid product with the screen timeout only being able to go up to five minutes. Blackerry, please add this as an option, Never Time Out when plugged in. 
    I went to update to newest 1314 update and the stupid thing went to sleep on me again, you said you were going to add this as an option now please do it.
    Jeffs Reviews

    BlackBerry is a brand, RIM is the company that owns the Brand.
    I would like the screen not to time out as well. but there is an app that can help  White Noise will keep it on.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Time outs when redirected from RDS CB to RDSH

    Hi,
    I'm troubleshooting connectivity for the following setup:
    1x RD Gateway server
    1x RD Connection Broker Server also License server
    1x RD Web server
    1x RDSH server with multiple RemoteApps
    Gateway is configured to allow bypass for local connections.  Certificate has the correct name and is successfully installed. Certificate is from an internet CA.
    When users come in over the internet RemoteApps launch pretty quickly every time.  When users connect over the LAN RemoteApps launch successfully but much slower.  When users connect over some VPN connections the connection times out when launching
    a RemoteApp.
    Over VPN I can see a successfull CAP and RAP in the Gateway Event log.  I can also see a successful connection and successful redirection from the gateway to the connection broker over HTTP.  In the SessionBroker log I can see a successful connection, but
    then when the redirect to RDSH is attempted event 819 occurs "This connection request has timed out. User could not log on to the end point within the alloted time. Remote Desktop Connection Broker will stop monitoring this connection request."
    When you connect over the LAN it takes longer but successfully redirects, and when connecting over the internet (non VPN) it connects quickly and successfully.
    Any ideas?
    Thanks
    Tim

    Hi Tim,
    What’s your server and client version you are using?
    Please uncheck the option “Bypass RD Gateway for local address” for gateway setting and verify whether there is any improvement in connections. Also as you have commented that you are receiving time out when you use VPN connection, please see whether there
    is any blockage from firewall side for not allowing VPN connection to make the connections. 
    This might also occur due to antivirus or other 3rd party related software. Because as you can connect directly from internet without any issue but there is some problem with internal LAN and VPN connection, So seems issue with internal firewall\antivirus.
    Please check whether it is not blocked or any policy applied for not allowing connection. 
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Screen blanks out when pushed tilted beyond 90 degrees

    HP Pavilion 4t - 1000, Vista OS. Screen blanks out when pushed beyond 90 degrees, i.e., vertical position, , No change has been made in software, battery run down and has been replaced with identical battery from HP.

    A very high percentage of the time this is from a punched or crushed cable that leads from the mother board, through the left hinge and up to the top of the screen in the back. I got a cable from China off eBay for $4.99 + $2.99 out of country shipping (from China).
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • Performance issue in Report (getting time out error)

    Hi experts,
    I am doing Performance for a Report (getting time out error)
    Please see the code below and .
    while looping internal table IVBAP after 25 minutes its showing  time out error at this poit ->
    SELECT MAX( ERDAT ) .
    please send alternate code for this .
    Advance thanks
    from
    Nagendra
    Get Sales Order Details
    CLEAR IVBAP.
    REFRESH IVBAP.
    SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
       INTO CORRESPONDING FIELDS OF TABLE IVBAP
         FOR ALL ENTRIES IN IVBAK
           WHERE VBELN =  IVBAK-VBELN
           AND   MATNR IN Z_MATNR
           AND   WERKS IN Z_WERKS
           AND   ABGRU = ' '.
    Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
      SORT IVBAP BY MATNR WERKS.
      CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
             WK_BLOCK, WK_MMSTA, WK_MSTAE.
      LOOP AT IVBAP.
          CLEAR WK_INVDATE.                                   "I6677.sn
          SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
          AUBEL EQ IVBAP-VBELN AND
          AUPOS EQ IVBAP-POSNR.
          IF SY-SUBRC = 0.
              MOVE WK_INVDATE TO IVBAP-INVDT.
              MODIFY IVBAP.
          ENDIF.                                               "I6677.e n
          SELECT SINGLE * FROM MBEW WHERE             "I6759.sn
          MATNR EQ IVBAP-MATNR AND
          BWKEY EQ IVBAP-WERKS AND
          BWTAR EQ SPACE.
          IF SY-SUBRC = 0.
             MOVE MBEW-STPRS TO IVBAP-STPRS.
             IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
             MODIFY IVBAP.
          ENDIF.                                      "I6759.en
        IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
          CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
          MOVE IVBAP-MATNR TO WK_MATNR.
          MOVE IVBAP-WERKS TO WK_WERKS.
          SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
            WHERE MATNR = WK_MATNR
            AND   WERKS = WK_WERKS.
          IF NOT MARC-MMSTA IS INITIAL.
            MOVE '*' TO WK_MMSTA.
          ENDIF.
          SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
            INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
            WHERE MATNR = WK_MATNR.
          IF ( NOT MARA-MSTAE IS INITIAL ) OR
             ( NOT MARA-MSTAV IS INITIAL ) OR
             ( NOT MARA-LVORM IS INITIAL ).
             MOVE '*' TO WK_MSTAE.
          ENDIF.
          MOVE MARA-PRDHA TO WK_PRDHA.
          SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
            WHERE MATNR = WK_MATNR
              AND SPRAS = SY-LANGU.
        ENDIF.
        IF Z_BLOCK EQ 'B'.
          IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
            DELETE IVBAP.
            CONTINUE.
          ENDIF.
        ELSEIF Z_BLOCK EQ 'U'.
          IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
            DELETE IVBAP.
            CONTINUE.
          ENDIF.
        ELSE.
          IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
            MOVE '*' TO WK_BLOCK.
          ENDIF.
        ENDIF.
        IF WK_PRDHA IN Z_PRDHA.                                    "I4792
          MOVE WK_BLOCK TO IVBAP-BLOCK.
          MOVE WK_PRDHA TO IVBAP-PRDHA.
          MOVE WK_MAKTX TO IVBAP-MAKTX.
          MODIFY IVBAP.
        ELSE.                                                     "I4792
          DELETE IVBAP.                                           "I4792
        ENDIF.                                                    "I4792
        IF NOT Z_ALNUM[] IS INITIAL.                              "I9076
          SELECT SINGLE * FROM MAEX                               "I9076
            WHERE MATNR = IVBAP-MATNR                             "I9076
              AND ALNUM IN Z_ALNUM.                               "I9076
          IF SY-SUBRC <> 0.                                       "I9076
            DELETE IVBAP.                                         "I9076
          ENDIF.                                                  "I9076
        ENDIF.                                                    "I9076
      ENDLOOP.

    Hi Nagendra!
    Get Sales Order Details
    CLEAR IVBAP.
    REFRESH IVBAP.
    check ivbak is not initial
    SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
    INTO CORRESPONDING FIELDS OF TABLE IVBAP
    FOR ALL ENTRIES IN IVBAK
    WHERE VBELN = IVBAK-VBELN
    AND MATNR IN Z_MATNR
    AND WERKS IN Z_WERKS
    AND ABGRU = ' '.
    Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
    SORT IVBAP BY MATNR WERKS.
    CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
    WK_BLOCK, WK_MMSTA, WK_MSTAE.
    avoid select widin loop. instead do selection outside loop.u can use read statement......and then loop if required.
    LOOP AT IVBAP.
    CLEAR WK_INVDATE. "I6677.sn
    SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
    AUBEL EQ IVBAP-VBELN AND
    AUPOS EQ IVBAP-POSNR.
    IF SY-SUBRC = 0.
    MOVE WK_INVDATE TO IVBAP-INVDT.
    MODIFY IVBAP.
    ENDIF. "I6677.e n
    SELECT SINGLE * FROM MBEW WHERE "I6759.sn
    MATNR EQ IVBAP-MATNR AND
    BWKEY EQ IVBAP-WERKS AND
    BWTAR EQ SPACE.
    IF SY-SUBRC = 0.
    MOVE MBEW-STPRS TO IVBAP-STPRS.
    IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
    MODIFY IVBAP.
    ENDIF. "I6759.en
    IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
    CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
    MOVE IVBAP-MATNR TO WK_MATNR.
    MOVE IVBAP-WERKS TO WK_WERKS.
    SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
    WHERE MATNR = WK_MATNR
    AND WERKS = WK_WERKS.
    IF NOT MARC-MMSTA IS INITIAL.
    MOVE '*' TO WK_MMSTA.
    ENDIF.
    SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
    INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
    WHERE MATNR = WK_MATNR.
    IF ( NOT MARA-MSTAE IS INITIAL ) OR
    ( NOT MARA-MSTAV IS INITIAL ) OR
    ( NOT MARA-LVORM IS INITIAL ).
    MOVE '*' TO WK_MSTAE.
    ENDIF.
    MOVE MARA-PRDHA TO WK_PRDHA.
    SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
    WHERE MATNR = WK_MATNR
    AND SPRAS = SY-LANGU.
    ENDIF.
    IF Z_BLOCK EQ 'B'.
    IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
    DELETE IVBAP.
    CONTINUE.
    ENDIF.
    ELSEIF Z_BLOCK EQ 'U'.
    IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
    DELETE IVBAP.
    CONTINUE.
    ENDIF.
    ELSE.
    IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
    MOVE '*' TO WK_BLOCK.
    ENDIF.
    ENDIF.
    IF WK_PRDHA IN Z_PRDHA. "I4792
    MOVE WK_BLOCK TO IVBAP-BLOCK.
    MOVE WK_PRDHA TO IVBAP-PRDHA.
    MOVE WK_MAKTX TO IVBAP-MAKTX.
    MODIFY IVBAP.
    ELSE. "I4792
    DELETE IVBAP. "I4792
    ENDIF. "I4792
    IF NOT Z_ALNUM[] IS INITIAL. "I9076
    SELECT SINGLE * FROM MAEX "I9076
    WHERE MATNR = IVBAP-MATNR "I9076
    AND ALNUM IN Z_ALNUM. "I9076
    IF SY-SUBRC 0. "I9076
    DELETE IVBAP. "I9076
    ENDIF. "I9076
    ENDIF. "I9076
    endloop.
    U have used many select queries widin loop-endloop which is a big hindrance as far as performance is concerned.Avoid such practice.
    Thanks
    Deepika

  • Time out when seinding Idocs from XI to receiving system

    Hi All,
    we have implemented a file to Idoc scenario in our XI test environment.
    When sending more than one file at a time (containing one record -> 1 Idoc after conversion) XI creates the Idocs but gets a time out when passing the Idocs to the receiving SAP 4.6C system. We find the messages blocked in transaction SM58 with the status message "Transaction recorded" and on the XI system short dumps are created with the time out error message.
    Does anyone know this problem and can give us some hints how to resolve it ?
    Thanks in advance,
    Christiane

    Christiane,
    Check your partner profiles in the target R/3 system. Use Tcode WE20 and check the inbound parameters option to see if the radio button 'Process Immediately' is switched on. If yes, change this to 'Process by background program'.
    This way, the IDOC will be created in your system with status 64. You can then use program RBDAPP01 in the R/3 system to post these IDOCs to application.
    The reason I say this is, sometimes, posting applicaitons may take a long time thereby resulting in timeout. If this is not the actual reason, atleast this will lead you to the correct problem.
    Try this and let me know what's happening.
    KK

  • G580- Screen blacks out when power supply is not plugged in to the laptop

    My laptop is just 3 months old and I am already having problems with it.
    The laptop screen blacks out when i remove the power supply from it.
    When plugged in , it starts workin again.
    Whats the point of a laptop if i am not able to use it without plugging in??
    I don kno what the probelm is. Can anyone help here pls...
    Cheers
    Vaish

    Hi Vaish,
    I’d like to help you with this issue as we can try to increase the Brightness of the screen from the power options while plugged in,
    And then please if still the same we can try to uninstall the Lenovo Energy management and reinstall it back:
    Lenovo Energy Management for Microsoft Windows 8
    Lenovo Energy Management for Microsoft Windows 7
    Hope the information helps. Let us know.
    Regards
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Safari times out when uploading. Is there a fix?

    I'm a fan of the Safari webbrowser, BUT, for years it has pained me that it times out when uploading multiple images. I have scowered the internet in hopes to find a solution, but I find only third party plugins that don't look like they are from reliable sources.
    Chrome and Firefox can sit there and upload for any period, but Safari just stopps after 10-20 images, sometimes less. It seems more time dependant than anything else.
    I worked for tech support for a big company. We used to get loads of calls about this and we were instructed to tell people to use Chrome or Firefox.
    Why has it been so many years without a native fix? Has anyone else experienced this? Does anyone have a simple fix or a plugin from a reliable source?
    Many thanks,
    Tom

    Hi Carolyn,
    Thanks for your reply. My upload speed is 0.85Mbps.
    I'm sure this is not the issue however as it has been the same since I lived in Sweden with 100/100Mbps. When I worked at my old job with over 2 million customers uploading across Australia I would just have to advise all mac users to use another webbrowser because of this issue.
    Kind Regards,
    Tom

  • HT4972 iTunes times out when trying to download iOS 5.1

    iTunes times out when trying to download iOS 5.1 - can anyone help? Can I download via a browser and then install that way?
    Looking here http://osxdaily.com/2012/03/07/ios-5-1-download/ - I can download an ipsw file - how would I get that to install on my iPhone4?
    Help!
    Cheers
    P.S. My iPhone4 is on Orange UK - is this a GSM one? or CDMA???

    Hi,
    Tap Settings > General > Reset > Reset Network Settings
    Now restart your iPad.  Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If that didn't help, you need to post in the iPad forum here.
    This is the forum for Safari for the Mac OS X.

  • Iphoto times out when I try to add a photo to my hotmail account

    iphoto times out when I try to add a photo to my hotmail account

    No once you get the selection window and select photos ==> iPhoto then it is an iPhoto issue
    ust to confirm if you launch iPhoto everything is O? As a work around select the photo(s) and export (file menu ==> export) to a desktop folder and attach to your e-mail from there and then delete the folder
    LN

Maybe you are looking for

  • In the Extended Classic scenario, what creates the PO on the SRM side?

    Hi Experts, This sounds like a simple question, however, I've been unable to find the answer. What I am looking for is the process (report, workflow or function module etc etc) that actually creates the PO on the SRM side once the shopping cart has b

  • Third Party Sales Order - Complete Upon Partial Invoicing

    We have a third party sales order that creates a purchase order (No delivery is used).  If there are 2 lines items and we completely invoice one of the line items and partially invoice the other, the sales order is showing in a complete status. We ar

  • Exception in assigning XML elements value in Workshop

    Hi , I tried creating a variable of type XML object(OrderREsponse). I have one MB Publisher control which sends in a variable of type OrderResponse. Before sending it , I try setting the individual XML elements value in it. So, for all the individual

  • Poor Image quality upon PDF export

    hi, issue: images lose quality when viewed in PDFs i've searched/read these and other forums for the past few days and have tried just about every suggestion out there in order to get better quality images in my PDFs and nothing works.. it's as if ev

  • Connecting iMac to ASDL router via home Phone Network Adaptor (PNA)

    I connect to the internet via an ASDL Router from BT called the Network 1200. This allows other computers in the home to connect to the router via a telephone point close to the computer. This is achieved by plugging a Phone Network Adaptor into a US