Bug Report: #SQLERRM_TEXT# in Process Error Message

According to the Online Help for "Process Error Message" #SQLERRM_TEXT# should be replaced by "Text of error message without the error number". But it isn't.
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

I created an after submit PL/SQL process:begin
raise_application_error(-20000,'custom error text');
end;In the process error message attribute, I put:
My error message with #SQLERRM_TEXT# in it.
I submit the page and see this page:ORA-20000: custom error text
Error My error message with custom error text in it.
OKScott

Similar Messages

Process error message: Display on the same page

When I create a before header process and that has an error, the error message shows up on a page by itself with the OK button. This takes away the context of the error
Similar to how validations have the option of displaying inline on the same page, is there a way to have the process error message display on the same page?
Thanks

I just want to display the error message on the same page, thats all. I dont want a error page with just the error since it takes away all the context.
Well what do you want to do, you can set a item to
hold a message and display that item in a region
when this_exception then
:P20_ERROR_MESSGE := 'Something went wrong here';So, P20_ERROR_MESSAGE would be a hidden item on the page?
Then display the item in a region.How can I display that hidden item in the region? So the region would just have this read-only text box in it? But then it wont be hidden? I guess I can conditionally display the region only if the error message is not null?

While preparing an AUDIT - (Data changes report) faces an 'Server error' message

Hi BPC Experts,
While preparing an AUDIT report- (Data changes report) faces an 'Server error' message.
But regular users are able to input their data in EPM.
What could be the reason for this message?
Regards,
Rajesh.

Hi Chuan,
Attached the Error message here. We use BPC NW10
Rajesh.

Bw report to show all error message from an infopackage

Dears Experts,
I am looking for a way to analyze within a BW reports (a specific one or already existing in a BI content) all errors messages generated by an infopackage and stored within the status field of a PSA. Does someone have any feedbacks or ideas on that?
Thanks in advance,
LL

Thanks Sam,
And how to retrieved detailled message regarding each wrong status?
LL

Crystal Reports XI stopped working error message on a Windows Server 2008

We recently installed Crystal Report XI in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
"Crystal Reports has stopped working"
Problem signature:
Problem Event Name: BEX
Application Name: crw32.exe
Application Version: 11.0.0.1282
Application Timestamp: 422d5c77
Fault Module Name: StackHash_1fc1
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7ef2fbfc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.272.7
Locale ID: 1033
Additional Information 1: 1fc1
Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
Additional Information 3: 2f92
Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
Any recommendation on what is causing this error?
Thanks,
Luis

Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
The error I'm getting when trying to start the service is:
The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

Crystal Reports XI Release 2: Error message when trying to install

I am unable to install Crystal Reports XI Release 2 onto my computer. After putting CD1 into my computer and clicking install, I get the following error message:
"Error applying transforms. Verify that the specified transform paths are valid."
A couple members of my companies' I.T. department tried to help, but the error message was foreign to them. Tthey even built me a new hard drive, but unfortunately it gave me the same error message.
I am able to install Crystal Reports XI without a problem, but for some reason, Crystal Reports Release 2 will not install.
Any help you can provide in this matter would be greatly appreciated.

1.Are you able to neglect the installation window completely.
Like,can you just open your drive which accepts the cd and copy all the files from the win32 folder to another folder say "test".
2. If not on this machine, could you please try this on some other machine.
3.Otherwise you can download it from the following URL:
http://resources.businessobjects.com/support/additional_downloads/servic
e_packs/crystal_reports_en.asp#CRXIR2
Please select the "Service Pack 2 - Full build - ZIP - 1.03 GB -released April 2007" hyperlink.
Let me know if this helps
Thanks

Internet Protocol Processing Error Message

Here again Friends with an error message disallowing communication two serial interfaces. The interface and the line is up as you can see from the sh ip int s1/0 command but could not ping the second device because of this error.
Serial1/0 is up, line protocol is up
Internet protocol processing disabled
Please help out somebody!!!!!!!!
Regards

That message would typically either mean that the interface did not have an IP address configured or perhaps that the router was configured with no ip routing. My guess at this point is that the interface does not have a valid IP address configured. Can you post the output of show ip interface brief and perhaps post the configuration of the interface.
HTH
Rick

Batch process error message

Hi there
Last time i used photoshop everything was fine. and then all of a sudden none of my custom actions work with a batch process. a message keeps coming up saying
"the command "image size" is not currently available"
If i click continue it pops right back up saying the same but for the next process and again and again with every process in my action.
It does this on any photo and with any custom action i have saved
Interestingly if i just open the photo and click play on the action without going through the batch process... it works fine.. so its nothing wrong with my actual action.
Has there been a bug introduced with a live update along the way?
Its very very annoying as i regularly batch process 100s of photos for the web and now im having to do them 1 by 1!!
thanks in advance for any help.
how can i roll back an update in photoshop??

Photoshop does not have a live update so your problem must be with something else.
Geoff.

Failed To Open Process Error Message

I am not sure if this is an application issue or an OS X issue but I suspect this question is more appropriate in this forum.
I use SilverKeeper to do nightly back-ups on my wife's G4 iBook running 10.3.9. It has been working fine for weeks.
On last nights back-up the application stalled and this error message box appeared; "Failed To Open Process. Continue without Root Privelges?" When I clicked OK the backup appeared to run without issue. I have several back-up sets, each runs after the prior is completed. This error message popped up at the start of each back-up set.
The only change to the system is that yestersay I added a new laser printer to the network and installed a driver and added ther printer via Print Set-up. I also added the same printer to my G5 iMac but did not get the error message on my machine (I also run SilverKeeper nightly).
Given the simplicity of SilverKeeper I suspect this is an OS X message. Any thoughts on a cause or cure?
Thanks,
David

A repaior of permissions resolved the problem.

Oracle Report Server gives java error message

Hi All,
We have an oracle report server (or service) in Oracle application server 10gR2 running in Red Hat Enterprise Linux 4.5. And it was working fine.
But recently it gives some error message in the terminal like below.
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
When I restart the report server it works fine for a while and the error message appears again.
Dear Experts,Please response early.

Please check at http://<server>/dev60html/runrep.htm for follwings :
01. your test.rdf must be in report60 folder
02. your db must contain scott user
03. connect string must be tested and give the same inplace of test
04. your webhost may contain a dot, please check this should be the same as yours
hope this will help
bye !

Parallel Processing: Error message 00-250: "No CUA area available"

Dear colleagues,
I have implemented a parallel processing with asynchronous RFC for a large data analysis in CO-PC. I think I was able to implement everything properly as described in the sap help: http://help.sap.com/saphelp_nw04/helpdata/en/22/0425c6488911d189490000e829fbbd/content.htm
But now I face one problem: My jobs are often cancelled with the error message 250 of class 00 "No CUA area available".
I don't have a clue what this error message means. I couldn't find any help in the SDN, OSS or in the internet. Has anybody an idea how to handle this problem?
Thx very much for your help!
Marius

In your program while you doing the CALL FUNCTION - STARTING NEW TASK, did you check how many work processors are available.
Suppose you have 40K data in your internal table, and in one step you are passing 4 K data. Then 10 work processes are required. But in your group setting if you have define 9, then last one will fail. So before any 'submit job in new task' or any 'CALL FUNCTION - STARTING NEW TASK' statement if have to check if any work processes are available. if available then submit otherwise wait.
Thanks
Subhankar

Possible bug report: "username in use" error not returned

When I was creating this account, I got stuck at the page that creates a forum ID to be linked to my Apple ID.
I would enter my information, check the user agreement box, then hit submit... and the page would reload, having lost data in two fields (computer and operating system).
No error message was given.
When I changed the username, the submission went through.
Hypothesis: there's a missing error message that the forum software was intended to send, saying "username in use, try another."
Thanks for listening!

You are correct, the error messaging for that as well as when the terms of use are not agreed to are not appearing. While working on the new enhancements this got put on the back burner, thank you for reminding us about it.
-Eric

Bug Report - DB toolkit returns error when calling the DefaultDatabase property with SQLite

There's an old bug in the DB toolkit where calling the DefaultDatabase property returns error -2147217887 if you're using certain DBs (such as SQLite or PostgreSQL and I believe MySQL as well).
The problem is that this property is called by a VI which is used in some of the commonly used VIs (such as the insert VI),
causing them to fail. Whoever wrote the code was aware of this issue,
since they added a comment about it, as you can see below.
The immediate fix for this is pretty easy - add code to ignore the error or don't call the property at all. It's not used anywhere in the toolkit and unless you're using the VI yourself to get the property, this won't break any code. The problem with this is that you need to do this in every PC.
NI already has a CAR for this (CAR 232063) and should hopefully fix it, so there's no need to take further action at the moment. This post is for people searching for this in the future.
Try to take over the world!

Interesting. I have seen this before but it returned a different error code. (Error -2147352567)
=====================
LabVIEW 2012

Report Back ground processing, error

Hi,
I tried to run my program in back ground. It is showing the following error. I'm just Pressing F9 and scheduling the job immediately. When i go and see the "own jobs " in SM36, it shows the "job cancelled". When i see the job log, it shows "Control Framework: Fatal error - GUI cannot be reached" and "ABAP/4 processor: RAISE_EXCEPTION". When i debug the job using JDBG transaction it runs smoothly and generates spool.
Can you provide some solutioons?

HI,
Is your report having some OOPS functionalities?
Are you making use of any container or ALV GRID object.
In that case it will not run in background and will give you this error.
Search in SCN. This has been discussed a lto of times.
There are several posts on how to avoid this.
Regards,
Ankur Parab

Crystal Reports Server XI Infoview Error Messages

Just upgraded to Crystal Reports Server XI Release 2. I can create reports and save them using the enterprise method. The reports run fine in Crystal reports but when I try to view a report using Infoview I get the following messages:
Unable to retrieve object.
Library not registered.
If I change viewers the first line will be different but the second line will be the same.
All the servers are running and permissions look good. I've searched the web and this forum and could not find an answer.
Thanks,
mx_forever

Jock,
That is understandable as I just saw a typo in the dll name. I think more importanly we should check on a few other items.
1. I am presuming the Infoview/CMC applications are running in IIS. Is that true? Do you jave the java version installed as well? If so, attempt to open the report(s) there.
2. Is IIS is involved, Is there a valid virtual directory for crystalreportviewers115?
I have never seen anything with "Line 6" before. It may be a reference to the web.config file that specifies the viewers etc.
Tony

Bug Report: #SQLERRM_TEXT# in Process Error Message

Similar Messages

Maybe you are looking for