Bug report: Website doesn't show flash data with version 11.4

A website I've used for years no longer shows any data with the new version of Flash Player; I see a spinning "loading" wheel instead, which never stops spinning. Others using the site are having the same problem.
I have removed 11.4 and installed 10.3 and all is well again.
Website: gmws.edupage.org/timetable (the school schedule I administer). A timetable should appear, and clicking on "teacher", "class", etc. should give a dropdown list of options. (Try under 10.3 and you will see the correct behavior.)

I've now fixed the timetable so it is using a non-Flash version. To see the problematic behavior, you will now have to navigate to gmws.edupage.org/timetable, and then click on the icon at the top of the page which says "2012-2013 final schedule easily viewable" (this is the non-Flash version). From the dropdown list that appears, choose the Flash version of the timetable, "2012-2013 final schedule (07/27 -..." and you will see the spinning wheel under 11.4, a proper school schedule under 10.3.

Similar Messages

Calendar today doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite

Calendar "today" doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite.
Is it a bug?

Sorry for the huge chunk of code.
Mm, yes, I'm far too lazy to read all that.
But you should be overriding paintComponent(), not paint().
http://www.google.co.uk/search?hl=en&q=java+swing+painting&btnG=Google+Search&meta=
I've not bothered to work out from that pile of magic numbers exactly what you're tring to draw but is it not something that JTable would happily do?

Crystal Report for VS 2010 - The report page doesn't show in IIS

Hi all, I get a problem with Crystal Report for VS 2010 (version 13).
My website is built using VS 2010 (asp.net 4.0) and Crystal Report v13.
It work okay when I run it in the VS 2010. But when I host my site in the IIS 7, when going to the page that contain the Report, the report show nothing.
The page is blank except my button I've created to export the Report.
The weird thing is when I click the my button (export to pdf), it doest export the correct pdf.
Note that this happens in my development machine: windows 7 32bit.
I've spent a day figure out problem but still haven't found the problem.
Hope you can help me.

Let's start with the viewer. Sounds like the viewer directory is not configured correctly. Use [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article as a guide on how to do this.
I still do not have info on the following:
it means even though the crystal report viewer doesn't show, i still can export it's content to pdf.
With all due respect, think of it this way;
You're the mechanic. I'm a guy with a car. I text you; I'm sitting in my car. It will not get me to point A. Fix it.
In a nut shell, that is what you are asking me to do with the export. The more detail you provide, the better. See if you can provide the info re export I requested in my previous post.
Ludek

Windows Server 2008 doesn't show install date

Windows Server 2008 doesn't show install date for applications and update.<br /><br />It only shows "Unspecified", at the very top.<img alt="" src="http://social.technet.microsoft.com/Forums/getfile/286394"
/><img alt="" src="http://social.technet.microsoft.com/Forums/getfile/286395" />

In Programs and Features, you can have more options by right click on the tabbed window showing Name, Publisher and Installed on. May be you can check that once otherwise try to reinstall the features using Turn Windows features on /off.

It seems that the last message sent in imessage doesn't show the date/time.

When I look at the imessage screen it doesn't show the date/time on last messages.

Claudia252 wrote:
Thank you. I cant figure out how to change the lable infront of the number to "iPhone" . It shows "home", "work", "pager", etc. but it doesn't show an "iPhone" option.
In the Contact, tap Edit.
Tap the label in front of the number and another Label screen apears.
Tap the label you want to use.

My Dock doesn't show all applications with shortcut

My Dock doesn't show all applications with shortcut
Apple tab only shows some applications on my list not all, anyone know why? I went under system settings to fix it and there is no option for it.
Thanks!

Perhaps I don't understand your question, but if you think that the doc shows every application you have on the computer, this is incorrect. If you want certain applications to be shown on the dock you have to add them to the dock. The dock comes preset with a few select Applications Apple wants to feature but you are free to add others or remove ones you don't use.
Patrick

SAP Crystal Reports 2011/2013 doesn't show Company Data Base

I have CR versions 2011 and 2013 in several clients, and I can't connect to SAP B1 through the integration component. The behavior is that when I fill all the fields, I can't see the Company DataBases; if I type it manually and click "finish" I get the "conexion failed" error. With version 2011 it was working and then stoped working just like that. With 2013 has never worked. I've read in several forums that this error is recognized by SAP since early 2008 versions, but only talk about future "fixes". I've checked if any fix for 2013 is available but no lucky, it seems that fixes is a mess with CR.
See screenshot. Any ideas how to fix this? is this really a bug?
I have SAP 9 PL 9.
UPDATE: My SAP Partner Support has told me this error is caused by the version of SQL I have (which is 2012) and that SAP will release a patch to correct this soon, is this correct?

Hi,
Please check SAP note:
1966132 - SAP Business One 9.0 PL09 (SQL & HANA) supports SAP Crystal Reports 2013, version for the SAP Business One application
Thanks & Regards,
Nagarajan

Microsoft's connect website doesn't show content properly in firefox

I have contacted Microsoft directly regarding this matter but did not receive a reply. Also their connect website no longer allows filing bugs on the website itself so I don't know where else to report this. Please forward this to whomever oversees the site.
If you view a bug report submitted on connect in Firefox the description will be cut off if goes past the width of its container. It has been like this for many months. The text should wrap as it does in Chrome and IE. For example this bug:
https://connect.microsoft.com/VisualStudio/feedback/details/875492/compile-error-passing-a-random-device-to-mersenne-twister-engine
Notice in this screenshot from Firefox the text is cut off rather than wrapped.

Hi popchoc,
For the connect site issue, sorry for that we also didn't support it, you know that actually this forum is to discuss the VS IDE. I think that you'd better discuss this issue with the connect members.
This issue the result in IE after I visit it in my side.
In addition, since the Firefox is the third party browser, it is hard for me to help you repro this issue in my side. But if possible, you could test it in different machine with the same browser, I'm not very sure that whether it is the Firefox browser
issue or the connect web site issue. But you could discuss this issue with connect site members, please also post this issue to the Firefox forum, so they could help you repro this issue better if it is hard for you to really repro this issue in different
machines.
Of course, if you meet any VS IDE usage issue, welcome to our forum:)
Sincerely,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Metadata conflict: Doesn't show location data

Hello there,
I imported some pictures to Lightroom and edited them there normally. After closing lightroom I edited the location information via GeoSetter (www.geosetter.de). Looking at the images via ACDSee, I see correctly entered City, Sublocation, Procince, Country Code and Country Name in the IPTC data.
Firing up Lightroom 2, I do not see these metadata changes, location fields are all empty. So I click on Synchronize folder and synchronize Metadata. Lightroom now gives all images a Metadata status of "Has been changed". When I click on "Resolve conflict", the location data still is not shown, but actually the location data is deleted when looking at the image again via GeoSetter (or ACDSee) - basically the Lightroom-state-of-things (no locationdata) has been restored I guess. Ok, moving on.
I go back to GeoSetter and reset the location to where it should be, click on synchronize metadata in Lightroom again and the Metadata status is "up to date" - no "resolve conflict" possible, the problem now is:
The location data is STILL in the IPTC fields, Lightroom doesn't show it though, location fields are empty and stay empty even after synchronizing, or Lightroom deletes it as previously stated.
What is the correct way to edit metadata externally and how to tell Lightroom to resolve the metadata conflict by ACCEPTING the external changes and not reverting to the status quo?
Sincerely,
Dennis

>will this method not revert any prior changes made to the images? (e.g. Crop, Keywords, Local Adjustments).
It will, which as you have already figured out, isn't a good idea.
I don't know anything about Geosetter, but my guess is that it's writing the data back into the original photos. Unfortunately, Lightroom doesn't see these changes when Sync folder command is used because it's looking for a Metadata Change date, which is normally stored in XMP. There is a workaround though.
You haven't mentioned the type of files that you're working with, but I'll assume they're raw. If so the workaround is to use the Lr "Save Metadata to file" command before working on them with the external application (Geosetter). This will create an XMP file for each photo that contains all your existing metadata plus any Develop adjustments. Now you can save the new IPTC back to the files using Geosetter. Once that part is completed you can use the "Read Metadata from file" command knowing that all your original Lr metadata and develop adjustments will be copied back along with the new IPTC info.
Above also works with JPEG and TIFF files

Explorer doesn't show flash

hi,
a very baffling issue: flash banners I designed for two site
only play part (...) of the animation in one of them an doesn't
play any animation in the other (but the banner itself does show).
the problem occours on some computers and on some it doesn't
- all while browsing with Internet Explorer 7.
why? what? how?
the links to the problematic banners:
http://artwo.net/synergy_site/home-h/home-h.html
www.ibclondon.com
I would apperciate help with this issue, I'm kind of
desperate by now trying to solve this...
thanks in advance
dotanbahat

NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe

Bug report: Naming a Bin after creating it with drag'n'drop

There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon.
To reproduce:
Select some clips in your project browser
Drag them onto the New Bin button
A new bin is created with the clips in it
- the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
- type in a new name - it accepts the name fine, now press enter.
- your new name disappears, and *now* you are really in the mode to edit the bin name
- type your name again, and it works.
Work around:
When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
(is there a better place to file bug reports?)
Version 6.0.1 (014 (MC: 264587))
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MP51.007F.B03
SMC Version (system):          1.39f11
SMC Version (processor tray):          1.39f11
OS X 10.6.8

Er, just answered my question about bug reports by reading the "read this before posting" link above
But I'll leave this here for the work-around in case anyone else needs it.

Bug Report #3 (Designer moves your objects around with no permission)

Post Author: Shannara
CA Forum: Crystal Reports
Product: Crystal Reports
Version: 11.0.0.1282
Patches Applied: (( There are no patches for Crystal Reports x11 ))
Operating System(s): Windows XP SP 2
Database(s): (( Not Applicable ))
Error Messages: (( None ))Steps to Reproduce: 1. Add a box to a blank report.2. Go into the size & position dialog and change the size, note the values you put in.3. Reopen that dialog and look at the values. This bug is reproducible, just like my previous bug reports. Really annoying, making it virtually impossible to create reports with Crystal Reports.

Have I mentioned how much i love my playbook now Great job on os 2.0

Device Storage Details shows Other data with capacity 11.9 GB after updating to OS10.1

After upgrading my Z10 to OS 10.1 the storage device shows that other data with 11.9 GB with no reason, i didn't download alot of apps or games, only the default apps with couple of other apps, the Device is so slow and i have to restart the device more than three times in the last 2 hours.

SmoothRider wrote:
Hello demo501,
Welcome to the forums.
When you are looking at your device storage do you see a button that says "Device Storage Details" ?
As far as I know that is the button you have to press to determine if you have been hit by the Other Data Gnome.
Do you have any information to offer as a solution to get rid of it perminantly without wiping your phone? Sick of wiping this phone I got better things to do than baby sit my SmartPhone.
I am astounded at the inability of the BlackBerry community to address this. I am besides myself that BlackBerry corporation hasn't provided adequate documentation about this issue.

Bug report: entering serial number does not work with azerty keyboard

I did not find a place to submit bug reports, so I'm posting here.
During the instalation of Photoshop Elements 8 for Mac, I was not able to enter any numbers in the serial number fields. Some other keys did work (like &é$...). My keyboard is an azerty (Belgium). Notice the numbers on an azerty keyboard have to be entered while holding the shift key. I tried switching the keyboard to "French - Numerical" (wich enables numbers to be entered with shift lock on), and then some number keys worked, and others didn't.
I solved this with a workaround, by temporary switching my keyboard to U.S. English.

You can submit a bug report by clicking "Feature Request/Bug Report" in the upper-right corner:
http://www.adobe.com/support/photoshopelements/
Despite what it says, I've seen no hard evidence that Adobe ever pays attention to PSE bug reports.

LISTCUBE not showing any data with SAPKW70110

Hi all
we just upgraded our system from SAPKW70107 to SAPKW70110 and now do have the following problem:
All InfoCubes containing non-cumulatives don't show any data anymore in transaction LISTCUBE.
All the cubes did work fine before.
What is curious is that some queries based on these cubes are working and at least showing some data (but not the correct data).
We couldn't find anything in the notes so far..
Anything we could do?
Regards
bivision

Hi,
You can use improvised listcube to display data. It can be created by taking help from the following link ;-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70e092a3-9d8a-2d10-6ea5-8846989ad405?QuickLink=index&overridelayout=true
However you should raise this issue to SAP .
Navesh
Edited by: navsamol on Oct 11, 2011 8:17 PM

Bug report: Website doesn't show flash data with version 11.4

Similar Messages

Maybe you are looking for