BUG: Run command does not follow current project

The Debug command respects which project is currently active, i.e. selected by the user in the project folder.
The Run command, however, does not.
Version 11.1.1.0.31.51.56
Workaround:
Choose a class file with a main method, then issue run.
Regards,
Erik

Hi,
is it as web project or a Swing project ?
Frank

Similar Messages

  • I have consolidate my folders related to the video I am in the progress of working on.  Premiere elements does not follow their new location.  How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

    I have consolidate my folders related to the video I am in the progress of working on.  Premiere elements does not follow their new location.  How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

    This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
    https://forums.adobe.com/community/premiere_elements
    When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one.  Then save the file.  If you move the files again, you will have to relink them again.

  • HT3211 My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?

    My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, take the computer to the Apple store to have it checked out
    and repaired, if needed.
    Best.

  • The build directory of the test run either does not exist or access permission is required.

    i am trying to run automated tests
    i follow the steps in the web but when i have 2 issues that does not solve
    1. i created console project and add build definition without drop folder and queue builds that success.
    2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
    3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
    4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
    5. when i try to associate the builds for the test plan i have a PROBLEM(1):
    this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
    a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
    and than when i try to run the automated tests i have this PROBLEM(2):
    The build directory of the test run either does not exist or access permission is required. and the test failed.
    Please Help
    Roey

    Hi Rory,
    Thank you for posting in MSDN forum.
    According to the error message:
    (1) a pop up shown with error : " The build that you selected for this plan no longer exist "
    I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
    with yours like the following screen shot.
    However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
    After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
    Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
    http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
    In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
    I know that the error message occur in either of the following conditions:
    1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.) 
    2. The build directory itself does not exist.
    So please refer the following blog to check this issue:
    http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
    Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • VO does not follow anchor link

    I find it strange that VocieOver in Mac OS X (10.5.8) does not follow anchor links. The W3C specification documents and Wikipedia use them a lot; however the VoiceOver box does not follow the link while Safri jumps to that part of the page.
    Is this a miss configuration at my part or has it been designed that way?
    Thanks

    Hi there
    Your description seems to imply you are narrating at the same time as you are recording. This isn't best practice. Your best results will be obtained by adding the audio as a separate activity after you have recorded the screen action.
    Often in a web recording we notice what is perceived as a  mismatch. Often you end up with blank slides. This is because Captivate is running on your local PC (and running very quickly). But when you click a link to a web page, what really happens is that you send a command from your PC across the internet to a Web Server. The Web Server has to process that command, look up the desired page, send the page across the internet to your PC and it finally displays. While it may seem that it happens swiftly, compared to Captivate running on the PC it takes eons.
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Report Does Not Follow Select Column Order

    Hi all,
    Apex 2.2 on 10gXE
    I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
    It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
    Is there a fix/patch or alternative tips for this bug?
    Thanks a lot,
    Edited by: 843228 on May 24, 2011 10:32 PM

    Apex 2.2 on 10gXEStart by upgrading from this old unsupported version.
    >
    I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
    It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
    Is there a fix/patch or alternative tips for this bug?
    >
    This is not a bug. APEX maintains the original column order of the report. This avoids problems downstream in areas like the processing of <tt>g_fnn</tt> arrays in declarative tabular forms, where the assigned arrays are column-order dependent.
    APEX 4.x fixes column ordering bugs that could lead to report corruption, and includes drag-and-drop column ordering in the new tree view in addition to the up/down arrow re-ordering.
    If you really want column order to follow that in the source query, the workaround is to create a new report using the modified query.

  • HOST command does not seem to work in deployment system

    I am developing forms software for a SUSE Linux system, but the HOST command does not seem to operate correctly when used in conjunction with Application Server.
    All I am trying to do is launch Adobe Acrobat reader as a background job using the command :-
    HOST('/opt/Adobe/Reader8/bin/acroread &');
    but nothing seems to happen.
    If I enter the command :-
    */opt/Adobe/Reader8/bin/acroread &*
    directly from a shell window (using the same login account) the command works correctly.
    I have tried other commands e.g. directory listings etc and all seem to have the same problem.
    Furthermore when the same form is run from the development environment using "Internet Developer Suite" it operates correctly with no problems.
    I am running on a deployment system where all three tiers of oracle are on the same machine (i.e. Database, AS and web front end).
    Can anybody suggest any possible causes or anything I can try to help resolve this problem ?

    brian_a_j wrote:
    Although I still dont understand why HOST would not work given my configuration (the Application Server and Web Browser operate on the same machine).One little test, put the execution command in a shell script and try to execute the script with the HOST command instead of the command itself.
    Using HOST the script will be executed on the AS machine no matter from where it is executed.
    Tony

  • A JE created from the AP Invoice does not include the project # on all trx

    A JE created from the AP Invoice does not
    include the project # for the amounts entered in the freight box. To
    duplicate, do the following:
    1. Open an AP Invoice
    2. Enter BP Code
    3. Select Service type
    4. Enter a Project Code in drop down box on Accounting tab
    5. Enter a line in the Contents; specify GL Account, amount and Tax
    Code Open Freight box
    6. Enter an amount in one of the lines
    7. Click ADD
    8. Go back to the invoice and go to the Accounting tab Click on the GL
    journal note and you can see that the line corresponding to the
    contents line has a project, but the line corresponding to the Freight
    box item does not.
    My customer users these projects when printing GL agings and the
    information is very important. Shouldn't this information be carried
    forward on all transactions on the Journal entry? Is there a way to get this information to post?

    Hi Pat,
    the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
    You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
    If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then  be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
    It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
    All the best,
    Kerstin

  • ProjContext.Projects does not include master projects

    How do you get a list of all Projects, including master projects, from Project Online using the CSOM?
    I've tried the following code (copied from the docs), but it does not retrieve master projects:
    // List the published projects.
    private static void ListPublishedProjects()
    // Get the list of projects on the server.
    projContext.Load(projContext.Projects);
    projContext.ExecuteQuery();
    Console.WriteLine("\nProject ID : Project name : Created date");
    foreach (PublishedProject pubProj in projContext.Projects)
    Console.WriteLine("\n\t{0} :\n\t{1} : {2}", pubProj.Id.ToString(), pubProj.Name,
    pubProj.CreatedDate.ToString());
    Mike G.

    The trial version is Photoshop Extended.   The Extended features remain or go away the instant you input a valid, final serial number.  You get what you pay for. 

  • Unsupported: This version of Visual Studio does not have the project types

    I recently created a new virtual machine with the exact same step-up as my previous virtual machine. When I open my .sln files i get the following message:
    Here are the spec for VS 2012

    Hi,
    Based on the message, the VS Pro 2012 on your new VM does not support that project type. So what type of Visual C# project is the WriteToJS project? Which edition of Visual Studio did you create this project from? What .net framework is this project targeted?
    Please make sure this VS supports such project in order to work with this project fine in VS Pro 2012.
    I recommend that you check whether the same project template exists from File->New->Project->Visual C# in VS2012 Professional with Update 4 on the new VM. If the same project template exists, please create a new project to check whether the template
    project can be created successfully.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Webcan does not follow

    I have FG creative webcam live: motion cli fg2/2-23-00-00. When first installed and when first bring up computer it moves, after that it does not follow. Have to sit it up on things for others to see me. Also is there a stand you can buy for it's

    Open date and time preferences and make sure it is set to automatically.
    Reset PRAM:
    Turn on holding Command + Option + P + R until you hear the startup chime for the second time.

  • Rejected...We found that your app does not follow the iOS Data Storage Guidelines,

    Where and how do I fix this?
    We found that your app does not follow the iOS Data Storage Guidelines, which is required per the App Store Review Guidelines.
    In particular, we found that on launch and/or content download, your app stores 3.54MB. To check how much data your app is storing:
    - Install and launch your app
    - Go to Settings > iCloud > Storage & Backup > Manage Storage
    - If necessary, tap "Show all apps"
    - Check your app's storage
    The iOS Data Storage Guidelines indicate that only content that the user creates using your app, e.g., documents, new files, edits, etc., should be backed up by iCloud.
    Temporary files used by your app should only be stored in the /tmp directory; please remember to delete the files stored in this location when the user exits the app.
    Data that can be recreated but must persist for proper functioning of your app - or because customers expect it to be available for offline use - should be marked with the "do not back up" attribute. For NSURL objects, add the NSURLIsExcludedFromBackupKey attribute to prevent the corresponding file from being backed up. For CFURLRef objects, use the corresponding kCFURLIsExcludedFromBackupKey attribute.

    You're submitting a Newsstand app, right? This error is still under investigation, but the current workaround is create SD (1024x768/768x1024) cover images for your HD (2048x1536) folio renditions and try again.
    More info here:
    http://forums.adobe.com/message/4730637#4730637

  • My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    Hey there mbarikiwa,
    If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
    OS X Yosemite: If a USB device isn’t working
    If the device is connected to a USB hub: 
    Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on. 
    If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord: 
    Try plugging the device directly into your computer’s USB port  or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding. 
    If you have many devices connected to your Mac: 
    Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps. 
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    Check your device’s USB connection
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that.  Can someone help?
    Elaine

  • Payment Wizard - Series period does not match current period

    Hi All,
    I've a problem during creation of Incoming Payment through Payment Wizard.
    0 payments were added at the end of creation Incoming Payments--> Bill of Exchange  using Payment Wizard.
    In Non-Included Transactions  I can read: series period does not match current period
    I've examinated the incaming payment's numbering series and the relate series to document and everything seems ok, so I don't understand the reason of error.
    If I try to add the same Incoming payment> Bill of exchange manually in Banking>Incoming Paymenti-->Incoming Payment (without Payment Wizard) it works perfectly!!!
    Can you help me?
    Simona

    Hi Simona,
    In step 2 of the Payment Wizard, please check that you have selected the correct series for Incoming Payment at the bottom of the screen.
    Hope it helps,
    Jesper

Maybe you are looking for