Bugs, bugs, bugs

found some cruicial bugs in flash cs3.
1. When making "kisekae" for mobile phone menues (in Japan),
i have problems with the colors property inspector. i select one
color but it chooses its own color. if i select a mc, the
properties inspector does not show. then i have to close the
program completely and restart.
2. selecting frame and adding a frame using F6 or
right-clicking, it does not duplicate the previous frame. it makes
an empty keyframe instead.
3. when using "Device Central" and developing "kisekae
menus", and when I test DoCoMo N903 and N904 series, "Device
Central" remains open, but Flash cs3 crashes.
So far nothing yet, but this has prompted me to return to
Flash 8.
Has anyone found any similar bugs in cs3?

If you're experiencing a problem with iTunes, I would suggest you post here first. It may not turn out to be a bug but something that could be corrected. You may want to start a new topic here, just to make sure it doesn't get buried in this thread and so not get people's attention.
If it can be confirmed as a bug or you want to make a suggest, lacking an iTunes feedback page (which has been requested for months but has not appeared), using the Mac OS X feedback page is your only option.

Similar Messages

  • Is there a Bug or Bug Fix in iPlanet 4.1 for URL Forwarding???

    Here's the issue...
    We are forwarding a number of URL's from one website to another.
    When we create these under the iPlanet Web Server Admin UI, the URL's appear, and get written to obj.conf, and the Web Server appears to "Save and Apply" the changes, effectively restarting the Solaris Process ID.
    The problem is that the httpd process does not actually restart, and the URL forwards return a 404.
    If we manually restart the Web Server daemon, everything appears to funtion properly.
    I have been searching through the iPlanet Knowledge Base, and not haveing any luck, so I am hoping someone here may have an idea.
    Thanks!

    Hi,
    Please let me know your iWS version including service pack(example:4.1sp7)and OS version. So that i can test it and let you know the feedback.
    Is there a Bug or Bug Fix in iPlanet 4.1 for URL Forwarding???
    yes is there, but related to NSAPI please check the below link.
    http://docs.iplanet.com/docs/manuals/enterprise/41/rn41sp9.html#26930
    Thanks,
    Daks.

  • [Bug] Compiler bug in JDev  10.1.3.0.4 (SU5)

    Hello,
    I would like to report a bug with Java 5 compiler in JDev 10.1.3.0.4 (SU5) build JDEV_ADF_10.1.3_NT_030125.0900.3673 regarding covariant return types.
    As of Java 5, it's now possible to override a method with a different return type as long as the new return type is a subclass of the overridden method's return type. JDeveloper compiler will manage that correctly (no compilation error), but will result in a java.lang.AbstractMethodError if the overriding definition come from an interface.
    So the reproduction case is :
    public interface Interface1 {
       public Object myMethod();
    public interface Interface2 extends Interface1 {
      public String myMethod();
    public abstract class AbstractInterface2 implements Interface2 {
    public class MyClass extends AbstractInterface2 {
      public String myMethod() {
        return "Hello"!;
    public static void main(String... args) {
      Interface1 myObject = new MyClass();
      myObject.myMethod();
    }I did not test with other JDev version.
    Regards,
    Simon Lessard

    quick workaround is to set project output directory to the WEB-INF/classes directory and compile the jsp from jdeveloper, oc4j then updates the loaded class file without re-compiling the jsp.
    This works fine, but if I let OC4J try to compile the JSP problem still occurs, anyone have any ideas why either of these problems occur?

  • Nokia Music / MIX Radio Bugs and BUGS at Care Cent...

    I am feeling absilutely dejected to have bought a Lumia 820.
    It has been a year and over but still Nokia has not been able to provide solutions to generic and chronic problems. I have been asking for solution to the music problem since a year but no answer but today at last when i visited nokia care centre (Bohra Communications, Navrangpura, Ahmedabad) IT WAS A COMPLETE LET DOWN ! The guy who received me was a total Noob and illitrate and also all engineers (They didnt even know Amber, Black and whether it can be rolled back or not One guy asked another "Boss can we have Amber in 820 after Reset?. They just did not know anything. I am proud that I have more knowledge about updates and firmwares of my handsets.
    My chronic problem was MUSIC ( Duplicating/ Dissappearing / Showing errors etc etc)
    My music (downloaded from Nokia music only gets lost, shows errors and moves to other storage folder. I had "Lumia Black" updated OTA.
    I bought this lumia for the free music subscription for a year and the person at the service centre said it is wrong. Whatever, but he said that the issue was with subscription. He did not understand that errors "c00d36c4" "player error" etc are not because of subscription but are bugs .....
    My phone has been reset (hard reset) for more than 5 times in past month and thats what i do all day. NOKIA IS GREAT !! However just an hour back the Bohra communication care centre again did the same. What the HECK is happening ?
    FORGET GETTING SOLUTION, PEOPLE DO NOT EVEN LISTEN AND UNDERSTAND.
    I am desparately seeking to throw this NOKIA + MICROSOFT junk away and opt for other.
    What did I gain buying a MS Nokia product ? No music since over a year and now additionally after reset the backup also is lost. Last time I did I had to update 23 apps and this time its down to only 8 apps !!!!
    God Only Save.
    To own a Lumia 820.... U need to have highest levels of Courage !

    I am constantly getting the problem you talk about in your second para. I don't experience it if I'm playing Nokia's own Offline selections, but it has been happening constantly over the past few weeks if I use the Create A Mix selections that I have downloaded for offline listening.
    Recently both the Offline Mixes and Create A Mix selections reduced themselves suddenly to four or five tracks only in each Mix!  Like you, I had to delete everything and download all again. Chews up my data allowance.
    Nokia's offline mixes don't appear to download using a free WiFi connection - is that normal? I really have to watch my data allowance.   Offline mixes will now expire after 10 days it seems.
    Altogether Nokia Mix Radio appears to be full of bugs.  I hope their software people are reading...

  • The SAP's bug after bug Notes = 919535?

    Hi,
    I found a new bug after correcting the bug which is contained in Notes = 919535 and don't know how to correct it.
    pls help.
    tks in advance.
    the description of new bug is below:
    1. I create a sales deal = A and don't create any price at the same time.
    2. I create a price with VK11 and assign it to sales deal = A.
    3. I enter into the sales deal = A and can't find the price I just created in VK11.

    Awesome, gr8, it worked
    By chance did you get a chance to work with Interactive forms by Adobe as an UI in WDA? because,
    Previously, w/ EHP6 the top right corner 'High Light Fields' button on rendered form, was turned OFF by default
    Now, after applying EHP7 the same button on rendered form is turned ON by default, because of this we lost a important business functionality in our case
    We played around w/ JavaScript code with in the form, also tried w/ form, Reader settings, but no luck
    Thank you

  • N80 V 4.0707.0.7 BUGS, BUGS and BUGS we need a new...

    1. Flash message not working... Pre paid customes oops.
    2.You need to enter clock and date after every switch on -- brrr.
    3. Network operator time Update is not happening
    when do we get a relief ... ?
    I hope its not like asking to UNMessage Edited by ys_drake on 19-Jun-200704:49 PM
    N80 V5.0719.0.2 24-05-2007 RM-92 Nokia N80 (12)

    Yes, the new version is 5.0719.0.2 it is available now (I really dreamed last night that Nokia has launched this 5th version) when I checked I was very happy because I thought it would solve all the problems I have in my last V4.0707.0.7 but unfortunately it solved only some bugs but the most important bug has not been solved and the new version has the same bug as the previous one:
    1.Phone requests Time/Date when restarted – whenever switched off and back on (this is the most important bug and I want to reply to the guy who thinks that it is a hardware problem: NO it is a bug in the new firmware because I haven't had this problem before i update to V4.0707.0.7 I am deadly sure)this is still on the new version 5.0719.0.2 !!!
    2.No service messages available, it show requesting then nothing (ok this was solved on the new version)
    3.A cursor appears blinking at the right side of the balloon that shows caller number(this is still on the new version 5.0719.0.2 !!!)
    4.Led stays blinking even after using the keypad and when calling (ok this was solved on the new version)
    5.Lower video quality (ok this was solved on the new version)
    I was waiting for the new Version to solve all the bugs specially the first one - but now after the new version I am thinking to throw Nokia products forever as I am not willing to wait more than that withouht the alarm colock, reminders, and more important I used to switch off my phone to get a quiet sleep since the new version I cannot sleep well, I have to leave my phone switched on to keep the clock running! but what if the battery runs out especially it lasts for less than day and all N80 users know this well and i think this bug cannot be solved.
    I want to tell all the users of N80 that we are all have been screwed by Nokia - I am really disappointed and wouldn't ever think that I will use other brands than Nokia but know just to retort this to Nokia I will have to use other brand

  • Listing trounced bugs from Bug Days in the wiki?

    I think it would be pretty cool if, after every bug day (or during it), a list of bugs was made outlining which bugs were solved (and maybe even who was involved in the bug squashing process). This might generate interest and encourage people to take part.
    What do you say?

    I think you can see recently closed bugs on the Bugtracker pages:
    http://bugs.archlinux.org/

  • Bug, bugs and bugs only! Not a software product!

    I wonder how self-confident man has to be to gain so much impudence enough to release that kind of buggy crap. I have never met legal and so-called "stable" software like this and do really hope never to have to get in contact with again.
    I've spent 4 damn days on a project which i first built in one (!!!) hour and which should be done so, the rest of time i spent on working around the software bugs like not being able to really import prepared mpeg2-files, constant crashing and falling in the final build process giving you something like 'Blu-ray Error: "fatal error", Code: "6", Note: "'. And what, customer has to guess what he has to do next?!!
    Adobe completely loses its image gained with legendary products like Photoshop, Illustrator or After Effects, releasing that unstable software.

    Chris,
    Thanks for setting Neil & Jeff straight. I read your posts and fully providing a solution and was able to effectuate a repair.
    Now, while I sit rendering another long project, let me just share some light in this conversation. As a previous owner of major software company with over 1000 employers, I have had to address issues of Buggy software over and over. For all of you whom are sittin in the "cheap seats", let me explain the structure of how these companies work.
    Engineers design the system, programmers write the code, Quality Assurance TEST the code. It is the job of the QA department to RIG the system to FAIL! YES folks, that's right, FAIL! They set up all of the different scenerios to see if they can get the software to fail, hooking up the wrong equipment, wrong files, etc. If the programmers did a thorough job, then the software would catch these errors, inform the user of a problem, log the problem, and send a report (by paper in the old days), back to the QA department who would then implement a bug report to the programming staff.
    A system which does not catch these errors but simply hangs, stops, crashes, giving no explanation is BUGGY. That is the failure of the QA department. The more bugs, the worse the performance of the QA department. If the QA department had done a thorough job, there is NO WAY that Encore 1.5, 2.0 & 3.0 would have been released with all of the bugs that came with the initial release. Remember, upgrades to an existing product level has two purposes. 1) To provide additional capabilities, 2) To repair BUGS!
    Now a word to the users of this forum. In my teaching years, my number one instruction to my engineering students was to "SOLVE THE PROBLEM"! I would tell them that no one cares to hear how smart you are, SHOW us how smart you are and SOLVE THE PROBLEM!
    For those of you who point to numerous reason as to the possible cause, spelling & grammatical mistakes, I would have FLUNKED you out of my class because you did not follow the instructions and perform the objective which is to SOLVE THE PROBLEM.
    To point out WHERE a solution to a problem may have been found AFTER it has already been repair is not SOLVING the problem! You would have flunked the course.
    After spending days working on a problem AND spending hours on the phone with technical support and still not having a problem fixed is
    not acceptable. This is the difference between successful products and non-successful products.
    Therefore, what I am requesting in the future is this; if the participants in this forum would keep their eye on the ball and concentrate on the problems at hand and solutions for its repairs, then this forum will be much more successful.
    If you want to discuss Spelling, Grammer, Microsoft operating systems, etc, then I sugguest that you start your own BLOG, when you can state your opinion till the end of time and hope that someone will join in.
    However, for myself and most likely Chris, we're just looking for a solution to our problems.
    Chris, I thank you for your continued posts. The installation program should have realized the different between the Administrator & User AND if installation on the user presented a problem, then the program should have accounted for that issue. THIS WOULD HAVE BEEN A PERFECT EXAMPLE OF A BUG! For the QA department NOT to pick up on this simple problem would be a major disgrace & failure on their part.
    As I stated earlier, there seems to be a problem with the installation program. We were able to isolate a problem with a 4 TB disk array. For some reason, the installation program is placing a thread onto the array. If the array has a failure (utilizing Raid 5), the program (CS3 in general) thinks that the program has been re-installed and needs to be re-activiated. No one at Adobe can figure this one out since the program is not suppose to put threads on the array (it is a data array only). While I'm not sure if this is different problem (you are using a network), it may tend to create the same type of scenerio that you are encountering.
    Our solution was to delete the preferences file (as I informed you in my previous post) and wait until the next array failure (which may never happen) to see what happens.
    If I can be of further help, let me know. I'll post my findings of our current problems once Level II Tech Support gets back with me tomorrow.

  • WiFi - Roaming Bug - Type Bug etc.

    Here are bugs on my Lumia 800
    a) When you disable roaming and you
    have no Carrier data connection then
    the phone will not use WiFi for data
    like I.E. or email... Urgent Fix Needed!
    This is a weird one... as WiFi schould
    work even if there is no Carrier.
    b) When you type in a new contact
    the Autocaps for a new cell does
    not always work. A fix would be welcome.
    c) The latest Nokia navigation software
    does not install...

    To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone.
    If the phone works after that, restore from the latest backup again. If the problem comes back, the backup contained corrupt data, causing the issue.
    If it still does not work, this could be a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • WRT54GS V6 Bug - QoS Bug Firmware v1.50.9

    In the QoS section i tried to setup a Entry for my VoIP Packet 8 Phone and when i Enable Qos and under "Device Priority" i enter the MAC address of my VoIP Phone adapter and set the priority to high. I have the Upstream Bandwidth set to Auto and when i click save setting it tells me that the Bandwidth is out of range must be 64-100000. But it is set on AUTO and the Bandwidth box is Grayed out so you cant type in the box.  So it is a Bug for sure.
    I can set the Upstream Bandwidth to Manual and type in a number between the 64-100000 and then set it back to Auto and it retains the number even though it grays it out then it will let me save it.
    So i guess the AUTO is not AUTO.
    I have firmware 1.50.9

    can your wireless pc still see your ssid after the upgrade? after the upgrade you may had reseted the router. what error message are your getting?
    Make sure that the wireless settings are all configured correctly.

  • BUG: Export bugs

    Cant export some results :
    Case1 :
    excute,
    select 'xxxx' as ccc,null as ccb from dual
    union all
    select 'xxxx' as ccc ,null as ccb from dual
    then try to export the result ---> some errors about "from" being not where it suppose to be ....
    Case2:
    Cannot give out the data but make a few unions with normal and literal fields and some function output string fields (like decode)
    try to export the result, you get nothing but the console gives this error:
    Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
    at oracle.dbtools.raptor.dialogs.actions.TableExportAction.launchDlg(TableExportAction.java:176)
    at oracle.dbtools.raptor.format.ui.ExportContextMenuListener$1.actionPerformed(ExportContextMenuListener.java:138)
    at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
    at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
    at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
    at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
    at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
    at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
    at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
    at java.awt.Component.processMouseEvent(Component.java:6216)
    at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
    at java.awt.Component.processEvent(Component.java:5981)
    at java.awt.Container.processEvent(Container.java:2041)
    at java.awt.Component.dispatchEventImpl(Component.java:4583)
    at java.awt.Container.dispatchEventImpl(Container.java:2099)
    at java.awt.Component.dispatchEvent(Component.java:4413)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4556)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4220)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4150)
    at java.awt.Container.dispatchEventImpl(Container.java:2085)
    at java.awt.Window.dispatchEventImpl(Window.java:2475)
    at java.awt.Component.dispatchEvent(Component.java:4413)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Errors occur at any type of export ...
    Last edit: here is an example of the second case:
    select 'xxxxb' as ccc,null as ccb from dual
    union all
    select 'xxxxa' as ccc ,null as ccb from dual
    order by ccc
    Edited by: user7403061 on 01.Nis.2009 04:07
    Edited by: user7403061 on 01.Nis.2009 05:29

    Hi,
    Confirmed that this is a reproducible issue. Have filed corresponding bug "8400792"
    - Rakesh
    Edited by: RakeshR on Apr 1, 2009 6:03 AM

  • Fp11 text bug | mask bug

    1.  FP11 and fp10.3.183.5  text bug:
    2. fp11 fla have one mask will lead to dynamic text can not be show.

    I've worked out how to fix it, I posted 2 bug reports by accident:
    https://bugbase.adobe.com/index.cfm?event=bug&id=2951270
    https://bugbase.adobe.com/index.cfm?event=bug&id=2951267
    Title
    How to fix the vertical text bug.
    Description
    Problem Description:
    Many of my textfields display vertically. In other words, 1 char per line.
    Steps to Reproduce:
    Possibly by using Flash CS3 to create textfields.
    I think the bug began in the lastest FlashPlayer update.
    Actual Result:
    Text displays 1 char per line with many textfields
    Expected Result:
    It should display properly
    Any Workarounds:
    The cause for this is a hidden property in textfields called "left"
    Please see the attached file DomDocument.xml.
    If you look at the first 3 textboxes in the xml, they have very large x values and very large "left" values to counteract the x value.
    If you remove the "left" property then it will work properly, as shown in the 4th textfield
    Download DomDocument XML: https://bugbase.adobe.com/index.cfm?event=file.view&id=2951267&seqNum=1&name=DOMDocument%2 Exml

  • [Bugs] 2 bugs found

    Hi, I have found 2 cases that seems to be bugs of the BPA Suite.
    http://www.gigasize.com/get.php?d=27mmw61qmhd
    At that link I uploaded some images and screenshots to show what I will describe below:
    Case 1:
    When we model a loop, if the loop contains a gateway inside it fails. The warning that the graphic shows says:"This node is being cross-referenced. Please remove one of the incoming connections"
    If inside the loop there isn't a gateway, almost everithing goes right.
    Case 2:
    See the graphics and the generated BPEL diagram. Where is the Rejected flow?
    Please, can you confirm if these are bugs or are mistakes of mine.
    Thanks,
    Neuquino

    Case: 1
    Please take care that if the loop contains a gateway - that gateway should also have a matching closing gateway inside the loop
    These two gateways match to one switch inside the while in bpel
    Case: 2
    I was not able to downlaod the images from the link, can you send by email to [email protected]

  • Screengrab bug & shutdown bugs?

    I have 5.0.1 (I think) version of the original iPad.  For some reason, my iPad goes into sleep mode constantly while I'm using certain programs (especially Age of Zombies).  I'm not sure why, and was wondering if its anything I'm doing, or if I need to change any particular setting.
    Also, I've been occasionally hearing a camera shutter sound effect & pctures of my screen have been ending up in my photos.  I'm not aware that I'm doing anything, so please let me know why this is happening.
    Admittedly, these might not be bugs, and just something I need to fix in my settings.

    KC Sig-
    The Screen Grab is done by momentarily pressing both the Home and Sleep buttons at the same time.  As you described, the camera click sounds and the screen image is added to your Photos library.  Is it possible you are holding it in such a way that you inadvertently touch those buttons?
    As far as going to sleep, go to Settings-General-Auto Lock.  Mine is set to 5 Minutes by default.  If there is no user activity for that time, the iPad goes to sleep.  Do the problem programs run without interaction from you?
    One thing you can try is to reset (reboot) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    If resetting does not help, both problems you describe might be caused by defects inside the iPad.  If you can take it to an Apple Store Genius, you may get a new iPad on the spot.
    Fred

  • Oracle jpublisher bug or bug in Oracle database 10g ?

    Hello,
    i`m trying to call web service from pl/sql in oracle database 10g v10.1.0.2.0.
    I`ve used this tutorial:
    http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm
    used oracle as 10.1.3 web service callout pack for 10g v10.1
    and jpublisher 10.2, which has generated pl/sql wrapper package and proxy classes.
    I`ve imported with loadjava dbwsclientws.jar and dbwsclientdb101.jar into my user called wscallout.
    Also imported proxy classes.
    When i`ve tried to call pl/sql function, i`ve got this error:
    java.lang.VerifyError: (class: oracle/j2ee/ws/saaj/soap/SOAPDoc, method: getDocumentBuilder signature: ()Loracle/xml/parser/v2/DocumentBuilder;) Wrong return type in function
         at oracle.j2ee.ws.saaj.soap.SOAPPartImpl.<init>(SOAPPartImpl.java:47)
         at oracle.j2ee.ws.saaj.soap.soap11.SOAPPart11.<init>(SOAPPart11.java:17)
         at oracle.j2ee.ws.saaj.soap.soap11.SOAPImplementation11.createSOAPPart(SOAPImplementation11.java:209)
         at oracle.j2ee.ws.saaj.soap.MessageImpl.getSOAPPart(MessageImpl.java:415)
         at oracle.j2ee.ws.client.StreamingSender._writeRequest(StreamingSender.java:649)
         at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:142)
         at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
         at genproxy.runtime.ProductSynchroService_Stub.endProductConversation(ProductSynchroService_Stub:137)
         at genproxy.ProductSynchroServiceClient.endProductConversation(ProductSynchroServiceClient.java:64)
         at genproxy.ProductSynchroServiceClientJPub.endProductConversation(ProductSynchroServiceClientJPub.java:243)
    Error -29532: ORA-29532: volanie Java ukonèené nezachytenou výnimkou Java: java.lang.VerifyError: (class: oracle/j2ee/ws/saaj/soap/SOAPDoc, method: getDocumentBuilder signature: ()Loracle/xml/parser/v2/DocumentBuilder;) Wrong return type in function
    14:27:34 Execution failed: ORA-29532: volanie Java ukonèené nezachytenou výnimkou Java: java.lang.VerifyError: (class: oracle/j2ee/ws/saaj/soap/SOAPDoc, method: getDocumentBuilder signature: ()Loracle/xml/parser/v2/DocumentBuilder;) Wrong return type in function
    14:27:34 ORA-06512: na line 10
    I haven`t found anything about this issue in oracle metalink, regarding to ORA-29532.

    dude if you are using jdeveloper 10.1.3.x for development of web service the library you have loadded into database dwwsclinet etc or sopa.jar or mail .jar will not work
    for getting the output for the web services developed on jdeveloper you need following file to upload on database
    wsclient_extended for 10.1.3.x.0 where x stands for your version
    wsclient_extended.jar which can be downloaded from
    http://download.oracle.com/otn/java/oc4j/1013x0/wsclient_extended_1013x0.zip the stands for subversion
    xstands for your version
    after downloading above file upload it
    open up the socket by command
    on SYS schema
    SQL>call dms_java.grant_permission('YOUR_SCHEMA','SYS:java.net.SocketPermission','<IPaddress ofcomputer>:<portnumber>(eg 10.8.11.98:8888)','connect,resolve');
    SQL>call dms_java.grant_permission('YOUR-SCHEMA','SYS:java.util.PropertyPermission','*','read,write');
    SQL>call dms_java.grant_permission('YOUR-SCHEMA','SYS:java.lang.RuntimePermission','createClassLoader','');
    SQL>call dms_java.grant_permission('YOUR-SCHEMA','SYS:java.lang.RuntimePermission','getClassLoader','');
    SQL>call dms_java.grant_permission('YOUR-SCHEMA','SYS:java.lang.RuntimePermission','setContextClassLoader','');
    SQL>call dms_java.grant_permission('YOUR-SCHEMA','SYS:java.lang.RuntimePermission','setFactory','');
    SQL>call dms_java.grant_permission('YOUR-SCHEMA','SYS:java.lang.RuntimePermission','setIO','');
    SQL>call dms_java.grant_permission('YOUR-SCHEMA','SYS:java.lang.RuntimePermission','shutdownHooks','');
    SQL>call dms_java.grant_permission('YOUR-SCHEMA','SYS:java.lang.RuntimePermission','accessClassInPackage.sun.util.calender','');
    Now make a jar file which contain all your class files of proxy put that jar file on database an compile that jar file on database it should work than convert it into java stored procedure and invoke that procedure
    Vishal Rijhwani
    JAVA DEVELOPER
    Message was edited by:
    user635429

  • BUG - Possible bug in ADFBC + JSF? (reproduced in SRDemo)

    Hi all,
    We've found that when we create a detail record in a master detail relationship, by going to a page with the creation form to add a new detail record, fill the fields and commit, if there is *a business layer validation error*, after solving the conflicting fields and trying to commit again, the creation form values seem to have been wiped out and you cannot save that record anymore (even introducing correct values again).
    To reproduce the same issue in the SRDemo sample app (ADF BC, not Toplink version), we've added a validation rule to ServiceHistory Entity Object (for exemple: 'Notes' attribute must have a length < 5), and after that, when you go to add a new note and write some text longer than 4 characters, the business tier validation check triggers the validation error as expected (showing up on the page). After that, the whole application is frozen (even the main menus) and you cannot do anything else.
    We're stuck with this issue, any help would be appreciated.
    - ADF Business Components     10.1.3.36.73
    - Java™ Platform     1.5.0_05
    - Oracle IDE     10.1.3.36.73
    Best Regards,
    Jordi
    Message was edited by:
    Ramot

    I'm not seeing this in the latest versions of the SRDemo sample that I am testing internally. Can you either:
    1) Email me a EMP/DEPT testcase in a JAR file attachment that illustrates the problem (if it requires JSF to illustrate, please remove the adf-faces-impl.jar from the archive to keep the example smaller), or
    2) Email me so I can email you a pointer to a later version of the SRDemo sample application which you can test in your environment to verify that the problem doesn't reproduce for you anymore either.
    Thanks.

Maybe you are looking for