Build Error While importing standard application into NWDS

Hi all,
I am trying to Import T&E Standard Applications into NWDS.
Two components (tra & tra/tre) have to be synched to the studio. These two are interdependent..
One Component I am able synch and create project perfectly but when i try to do the second one, i am getting Generation BUILD Error...
Help me in this regard..
Thanks
Malla
Edited by: challa mallareddy on May 7, 2009 12:34 PM

Hi,
As per your error, I think you have already created a project with name NewParProject. Give a different name and then check.
Also check if your par file is not corrupt. Download it again and follow below steps in NWDS :
Go to File>Import > Select par file >
>Browse and select the par file>
>Give a project name i.e. ParProjectTest > Finish.
This should work.
Regards
Deepak

Similar Messages

Error while importing .par file into NWDS

Hi Experts,
For my query I saw a similar thread in sdn forum. the link is given below.
/thread/382306 [original link is broken]
I have unzipped the par file and inside this there is no other par file. So I have to import this par file only.
Can anybody give some alternate way to resolve this.
Thanks a lot in advance.
Edited by: Srini on Nov 22, 2010 10:46 PM

Hi Experts,
Please reply on this.
Thanks a lot in advance.

Getting error while importing the application in Oracle Apex

Hi,
I am facing an issue while importing an application into my new Oracle Apex installation. Installation was successful with out any issue. I exported an application from my old Apex (version 3.0.0.00.20) and importing the same into new apex (version 3.0.1.00.08). I am getting the following error.
============================================================
The requested URL /pls/apex/wwv_flow.accept was not found on this server.
============================================================
When I click on import in Application Builder page and then browse the required file it gives the progress saying "Importing File" and after some time it displays the above error.
I tried bouncing the application also and there is not error in alert log.
Could any one please suggest, if there is some problem here. Or my approach is not correct.
Thanks in advance.
Regards,
Advait Deo

Osacar, I recommend that you try to import the application into your workspace on apex.oracle.com and see what happens. Also, refine the problem statement as much as you can, e.g., you get this error importing "the application" or when importing "any" application. How big is the file you're trying to import? Where did it come from? Can you upload images?
Scott

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

HTTP status 500 error while importing an application in Oracle Apex workspace

Hello everybody,
I am facing an issue while importing an Oracle Apex application in one of my workspace. Below is the screen of error. But if I try to import the same export file in other workspace in other database, the import works perfectly. Any clue?
Thanks in advance

Osacar, I recommend that you try to import the application into your workspace on apex.oracle.com and see what happens. Also, refine the problem statement as much as you can, e.g., you get this error importing "the application" or when importing "any" application. How big is the file you're trying to import? Where did it come from? Can you upload images?
Scott

Error while importing tpz file into XI Design

Hi All,
When i am trying to import latest exported tpz file from Dev system into Q system i am getting below error.
Also the tpz file i am importing , with same file name already i have imported earlier into Q system through other Dev system. Now i am importing the exported file through prod fix environment dev system. Please help me , how to import the file without this error. Also, how to avaoid duplicate file name for importing tpz files or overwrite exiting imported tpz file which is having same file name.
Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-00001: unique constraint (SAPSR3DB.SYS_C00136623) violated at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.tssap.dtr.pvc.basics.transaction.StatementReleasingConnection.executeBatch(StatementReleasingConnection.java:297) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.fireSQLBatches(DefaultIntegrator.java:1072) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.executeDBUpdates(DefaultIntegrator.java:384) at com.tssap.dtr.pvc.versionmg.DefaultIntegrator.integrate(DefaultIntegrator.java:337) at com.tssap.dtr.pvc.versionmg.VersionSet.integrate(VersionSet.java:183) at com.sap.aii.ib.server.pvcadapt.ImmutableVersionSet.integrate(ImmutableVersionSet.java:197) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegratorImpl._integrateUnconditionally(VersionSetIntegratorImpl.java:300) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegratorImpl.integrateClosedVersionSet(VersionSetIntegratorImpl.java:119) at com.sap.aii.ib.server.versioning.integration.VersionSetIntegrator.integrateClosedVersionSet(VersionSetIntegrator.java:52) at com.sap.aii.ib.server.propagation.PropagatorImpl.integrateObjectVersions(PropagatorImpl.java:261) at com.sap.aii.ib.server.propagation.Propagator.integrateObjectVersions(Propagator.java:174) at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcIntegrate(PvcTransport.java:191) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.integrateVersionset(InternalTransportServiceImpl.java:480) at com.sap.aii.ibrep.server.transport.impl.service.InternalRepTransportServiceImpl.autoIntegrate(InternalRepTransportServiceImpl.java:546) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:716) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:362) at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:151) at com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:75) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:100) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:312) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks in advance.
Rajesh
Edited by: rajesh amrabad on Sep 11, 2008 10:35 PM

In addition to abobe answers,
Keep this .tpz file at below mentioned location
\usr\sap\<SID>\SYS\global\xi\repository_server\import\XI7_0_SAP_BASIS_7.00_09_00.tpz
then login to the IR and peoceed as Tools -
> import design objects. Her you will get this .tpz file, just import it.
follow the steps given in this link and check if you are doing the correct thing.
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
The steps that you require are listed below,
1) You must have the role SAP_XI_ADMINISTRATOR or SAP_XI_CONTENT_ORGANIZER to be able to export and import XI content.
2)You import the XI content by first copying the provided export files into an import directory on the host of the Integration Builder and then importing the files into the Integration Repository.
3)Copy the export files into the import directory for the Integration Repository (<systemDir>\xi\repository_server\import).If the files are packed, you must unpack them before importing.The actual export files have the extension .tpz. You must not unpack these files.
4)The import directory is created the first time you call the Integration Builder.
5)Start the Integration Builder and call the Integration Repository.
To do this, perform the following steps:
a. Log on to the SAP system on which your Integration Builder has been installed.
b. Open the Integration Builder start page by calling it either from your user menu or with Transaction SXMB_IFR.
c. Choose Integration Repository.
Choose Tools u00AE Import design objects to import the XI content.
6)Only the files from the import directory are offered to be imported. The sequence in which
you import the export files is not important.
7)After a successful import, the Integration Builder moves the imported TPZ files into the directory <systemDir>/xi/repository_server/importedFiles. The support package stack of imported software component versions is displayed on the Details tab page for the relevant software component version in the Integration Builder. If an error occurs, this information is important for support.
Hope i have been of some help.

Error while installing an application into different work spaces in APEX

Hi All,
I am getting an below error while installing the application in the same workspace.APEX Version i am using is 4.0.2
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 6, column 41: PLS-00103: Encountered the symbol &amp;quot;PK &amp;quot; when expecting one of the following: ( - + case mod new not null &amp;lt;an identifier&amp;gt; &amp;lt;a double-quoted delimited-identifier&amp;gt; &amp;lt;a bind variable&amp;gt; continue avg count current exists max min prior sql stddev sum variance execute for
i have checked different ways.But i could not able to resolve it :(
Someone please help me as early as possible...URGENT

Hi,
Thanks for the reply.
For example,the 112 application which i want to copy is having 129 pages.
The application is working great and is having no errors
When i am trying to copy/import this application by auto assigning application iD ,its throwing an earlier mentioned error.
For every page,im using different scripts.
Is that code error?

Getting error while Importing the Application

Hi,
I am Getting Problem While Importing the Application
We are moving the Application from Test enivorment to Production Environment, Both are Oracle 10g with HTTP server and Application Express 3.2.1.
While Importing i am getting Error like.
Error report:
ORA-06550: line 3627, column 1:
PLS-00123: program too large (Diana nodes)
06550. 00000 - "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action:
Please Help Me its Urgent

Hi joel,
Even tried for the Copy of the same application in the same Application but its giving the same error.
and I tried with the SQL Developer It shows the error like
Set Application ID...
...authorization schemes
Rollback
Error starting at line 200 in command:
begin
--application/shared_components/security/authorization/des_mstr_delete
wwv_flow_api.create_security_scheme(
p_id => 7573129300337441 + wwv_flow_api.g_id_offset
in the line 200 the above code starts.
at end This will be displayed
Error report:
ORA-06550: line 3652, column 13:
PLS-00123: program too large (Diana nodes)
06550. 00000 - "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action

Error while importing CIM file into target SLD

Hi
We are in the process of moving our XI objects to QA.
As a first step , we are preparing the QA SLD ( we have a separate SLD instance for XI DEV and QA environments ).
We have our standard objects loaded into the QA SLD. Now for the custom objects :
1.I export the product and the corresponding SWCV from the source SLD .
2. I import the zip file into the target SLD in that order. While importing the product into the target, I get a warning -
<b>The target namespace for the special import already contains data for one or more export lines. Continuing this import may corrupt the state of your data.</b>
I am not sure what this means - should I go ahead and import my custom product and its SWCV ( the next step ) despite this warning ? Or am I missing any step ? I checked the weblog on the SLD preparation and did not see any additional steps other than export/import from the source/target SLDs
Thank you for your time in advance.

Hi Karthik,
Check out this link
==>http://help.sap.com/saphelp_nw04s/helpdata/en/b2/0aae42e5adcd6ae10000000a155106/frameset.htm
Hope this will explain you all the steps in importing...:)
Regards,
Sundararamaprasad.

Error while Importing SYSTEM objects into 9.2.0.6

HI,
I got the following error while importing data into 9.2.0.6 DB .
It is related to a SYSTEM object.
. importing SYSTEM's objects into SYSTEM
IMP-00017: following statement failed with ORACLE error 2270:
"ALTER TABLE "DEF$_CALLDEST" ADD CONSTRAINT "DEF$_CALL_DESTINATION" FOREIGN "
"KEY ("DBLINK") REFERENCES "DEF$_DESTINATION" ("DBLINK") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 2270 encountered
ORA-02270: no matching unique or primary key for this column-list
Constarint exists on Composite Primary Key on the parent table.
Can anybody help me out on this.
Regards,
Sumit Singh Chadha

Hi,
don't mentioning why are You importing SYSTEM objects, the error that You have, just looking the message, is due to an export done without the clause CONSISTENT=Y (so all relations parent/child preserved) having the replication (the table in error is one of the replication dictionary table) active (not quisced)
Repeat the export operation using CONSISTENT=Y an stop replication activity.
Hope this helps
Max

Error while importing CA cert into kerstore

Hi all,
I am facing below error while importing CA cet or trusted cert into keystore:
bash-3.00$ keytool -import -v -trustcacerts -alias tcstestenv -file TCStestCA.cer -keystore keystore.jks
Enter keystore password:
keytool error: java.lang.Exception: Public keys in reply and keystore don't match
java.lang.Exception: Public keys in reply and keystore don't match
at sun.security.tools.KeyTool.establishCertChain(KeyTool.java:2618)
at sun.security.tools.KeyTool.installReply(KeyTool.java:1870)
at sun.security.tools.KeyTool.doCommands(KeyTool.java:807)
at sun.security.tools.KeyTool.run(KeyTool.java:172)
at sun.security.tools.KeyTool.main(KeyTool.java:166)
bash-3.00$ keytool -import -v -trustcacerts -alias tcstestenv -file TCStestCA.cer -keystore keystore.jks
Enter keystore password:
keytool error: java.lang.Exception: Public keys in reply and keystore don't match
java.lang.Exception: Public keys in reply and keystore don't match
at sun.security.tools.KeyTool.establishCertChain(KeyTool.java:2618)
at sun.security.tools.KeyTool.installReply(KeyTool.java:1870)
at sun.security.tools.KeyTool.doCommands(KeyTool.java:807)
at sun.security.tools.KeyTool.run(KeyTool.java:172)
at sun.security.tools.KeyTool.main(KeyTool.java:166)
bash-3.00$ keytool -import -v -alias tcstestenv -file TCStest.cer -keystore keystore.jks
Enter keystore password:
keytool error: java.lang.Exception: Public keys in reply and keystore don't match
java.lang.Exception: Public keys in reply and keystore don't match
at sun.security.tools.KeyTool.establishCertChain(KeyTool.java:2618)
at sun.security.tools.KeyTool.installReply(KeyTool.java:1870)
at sun.security.tools.KeyTool.doCommands(KeyTool.java:807)
at sun.security.tools.KeyTool.run(KeyTool.java:172)
at sun.security.tools.KeyTool.main(KeyTool.java:166)
Regards
Sunitha

How did you create an empty keystore? Ideally when you use keytool -genkey command then it generates a keystore and a key. Have you made sure that the cert which you are importing is in PEM format (PEM certs can be opened in any text editor)
Regards,
Anuj

Error while creating OCA application in NWDS 7.1

Dear Experts,
I am creating mobile application for Handhelds (OCA) using mobile 7.1.
I created the service component, ui component and application component. Added the dependencies, build the application, uploaded the 3 components to the server, assigned it to my device.
But when I login into the mobile client in PDA, in application launcher screen, no application appears. In Device admin portal when i check, the status of MCD is installed.
Also when i simply run the application from NWDS using the built in PDA simulator, the application doesnt show any data and on the NWDS console i get the following error
2009-02-10 20:22:22 ... (com.sap.tc.mobile.cfs.pers.PersistenceManager:release resultset) Thread: Finalizer Error: java.sql.SQLException: Result set is closed
I am sure the coding part is not a problem. As before this application i created a similar application for Laptops and its working fine.
Reply Awaited
Regards
Priya

Hi Veera/Abhi
I have installed MinDB and all the required files on the PDA. It is synchronizing with the middleware.
On my NWDS PDA Simulator , the application is appearing but when i click on the application there is no data and it is giving exception
2009-02-11 13:02:40 ... (com.sap.tc.mobile.cfs.pers.PersistenceManager:release resultset) Thread: Finalizer Error: java.sql.SQLException: Result set is closed
Madhu--
Please find my ans to the following points mentioned by you
1) BASIS SWCV must be assigned in the Distribution Model Software Component Version tab of the device.
It is assigned
2) Activate the "DISTRIBUTE_USER_DETAILS" Rule in the admin.
Rule is activated
3) Activate the "DISTRIBUTE_USER_AUTHORIZATIONS" Rule in the admin.
Rule is activated
4) Make sure that you have installed the following components in the following sequence in the PDA
- Creme
- MinDB/DB2e
- PDA_eswt_container
- PDA Runtime.
Client is installed in this sequence only. I referrred to help.sap.com while installing
the application should atleast work in the NWDS PDA simulator. My basic problem is it is not picking up the data. giving the above mentioned error.
Regards
Priya

Error while Importing Webservice Model in NWDS 7.0.13

Hi Experts,
I am trying to Create Webservice Model (deprecated) in my Webdynpro Application using NWDS 7.0.13, using a WSDL which is hosted on PI 7.1.
However while resolving this WSDL, I am getting error "Unacceptable Choise Element Found. Choise can contain only model group with min/maxOccurs = 1".
Then I downloaded the WSDL, and changed the MaxOccurs = "1". After Importing this WSDL in my Webdynpro project, another exception got raised "Trying to Resolve qualified base " , here AcordMsgSvc is targetnamespace in XSD which is ported in PI for this Service Interface
Please help me resolving these 2 errors -
1) min/maxOccurs > 1 not allowed in NWDS 7.0.13 webservice model?? Do I need to install any plugins?
2)
The Details Error Log --
Error Oct 28, 2010 15:39:03.283 com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Invalid proxy generator configuration. See nested exception.
com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Invalid proxy generator configuration. See nested exception.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.getDefaultSchemaMapping(ProxyGenerator.java:142)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:103)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:86)
at com.sap.ide.ws.proxygenerator.ProxyHelperFunctions.createNamespacePackageMappingFile(ProxyHelperFunctions.java:82)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage$1.run(NamespacePackageMappingPage.java:114)
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:302)
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:252)
at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:357)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage.initTable(NamespacePackageMappingPage.java:170)
at com.sap.ide.wsproxy.wizards.prx.pages.NamespacePackageMappingPage.setVisible(NamespacePackageMappingPage.java:295)
at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:959)
at org.eclipse.jface.wizard.WizardDialog.access$1(WizardDialog.java:940)
at org.eclipse.jface.wizard.WizardDialog$3.run(WizardDialog.java:929)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:927)
at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:684)
at com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog.nextPressed(ModelDialog.java:218)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:316)
at org.eclipse.jface.dialogs.Dialog$1.widgetSelected(Dialog.java:423)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:583)
at org.eclipse.jface.window.Window.open(Window.java:563)
at com.sap.ide.webdynpro.modeleditor.ModelEditorCallback.createModel(ModelEditorCallback.java:52)
at com.sap.ide.webdynpro.service.modeleditor.ModelService.createModelWithUI(ModelService.java:70)
at com.sap.ide.webdynpro.service.modeleditor.ServiceWithUI.createModel(ServiceWithUI.java:49)
at com.sap.ide.webdynpro.tsmodel.application.provider.ModelNodeProvider.createUniqueName(ModelNodeProvider.java:55)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntityUin(EntityImpl.java:936)
at com.tssap.selena.impl.model.elements.EntityImpl.createChildEntity(EntityImpl.java:502)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.runInternal(CreationAction.java:76)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.access$000(CreationAction.java:24)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction$1.run(CreationAction.java:51)
at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1595)
at com.sap.ide.webdynpro.tsmodel.application.actions.CreationAction.run(CreationAction.java:57)
at com.sap.ide.webdynpro.projectbrowser.actions.PBCreateModelAction.run(PBCreateModelAction.java:95)
at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:224)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1407)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.lib.xml.util.NestedException -> javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: ERROR : Trying to resolve qualified base : DocumentId, but the uri resolver is not able to resolve the relevant namespace.
at com.sap.engine.services.webservices.jaxrpc.schema2java.SchemaToJavaGenerator.prepareAll(SchemaToJavaGenerator.java:462)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.getDefaultSchemaMapping(ProxyGenerator.java:136)
... 63 more
Caused by: javax.xml.transform.TransformerException: com.sap.engine.lib.xml.util.NestedException: ERROR : Trying to resolve qualified base : DocumentId, but the uri resolver is not able to resolve the relevant namespace.
at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:232)
at com.sap.engine.services.webservices.jaxrpc.schema2java.SchemaToJavaGenerator.prepareAll(SchemaToJavaGenerator.java:459)
... 64 more
Caused by: com.sap.engine.lib.xml.util.NestedException: ERROR : Trying to resolve qualified base : DocumentId, but the uri resolver is not able to resolve the relevant namespace.
at com.sap.engine.lib.schema.components.impl.LoaderImpl.resolveQualifiedBase(LoaderImpl.java:253)
at com.sap.engine.lib.schema.util.Tools.getTopLevelBase(Tools.java:466)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.getRefferedBase(SchemaStructuresFactory.java:154)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.createBase(SchemaStructuresFactory.java:49)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.createElementDeclaration(SchemaStructuresFactory.java:115)
at com.sap.engine.lib.schema.components.impl.structures.ParticleImpl.load(ParticleImpl.java:89)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.loadBase(SchemaStructuresFactory.java:162)
at com.sap.engine.lib.schema.components.impl.structures.ModelGroupImpl.load(ModelGroupImpl.java:100)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.loadBase(SchemaStructuresFactory.java:162)
at com.sap.engine.lib.schema.components.impl.structures.ParticleImpl.load(ParticleImpl.java:97)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.loadBase(SchemaStructuresFactory.java:162)
at com.sap.engine.lib.schema.components.impl.structures.ModelGroupImpl.load(ModelGroupImpl.java:100)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.loadBase(SchemaStructuresFactory.java:162)
at com.sap.engine.lib.schema.components.impl.structures.ParticleImpl.load(ParticleImpl.java:97)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.loadBase(SchemaStructuresFactory.java:162)
at com.sap.engine.lib.schema.components.impl.structures.ComplexTypeDefinitionImpl.load(ComplexTypeDefinitionImpl.java:178)
at com.sap.engine.lib.schema.components.impl.SchemaStructuresFactory.loadBase(SchemaStructuresFactory.java:162)
at com.sap.engine.lib.schema.components.impl.structures.SchemaImpl.loadComponents(SchemaImpl.java:288)
at com.sap.engine.lib.schema.components.impl.structures.SchemaImpl.load(SchemaImpl.java:267)
at com.sap.engine.lib.schema.components.impl.LoaderImpl.load(LoaderImpl.java:149)
at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:227)
... 65 more
Thanks,
Ninad

Hi,
Please have a look at this threads
Can not create Adaptive Web Service Model
Problems embedding adaptive webservice model
Regards
Saravanan K

Error while deploying the application into 11.1.1.2

Hi,
I am trying to deploy the application into Jdev 11.1.1.2 i am getting the following error.
04:11:39 PM] Wrote Enterprise Application Module to C:\Documents and Settings\rkanigolla.admin\Application Data\JDeveloper\system11.1.1.2.36.55.36\o.j2ee\drs\ESPSApp
[04:11:39 PM] Deploying Application...
<Nov 25, 2009 4:11:55 PM MST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1259190702422' for task '0'. Error is: 'java.lang.ClassNotFoundException: javax.faces.context.FacesContextFactory'
java.lang.ClassNotFoundException: javax.faces.context.FacesContextFactory
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.context.FacesContextFactory
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
Truncated. see log file for complete stacktrace>
<Nov 25, 2009 4:11:55 PM MST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'ESPSApp [Version=V2.0]'.>
<Nov 25, 2009 4:11:55 PM MST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
java.lang.ClassNotFoundException: javax.faces.context.FacesContextFactory
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.context.FacesContextFactory
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
Truncated. see log file for complete stacktrace>
#### Cannot run application ESPSApp due to error deploying to IntegratedWebLogicServer.
[04:11:55 PM] #### Deployment incomplete. ####
[04:11:55 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
[Application ESPSApp stopped and undeployed from Server Instance IntegratedWebLogicServer]
Please help me how can i resolve this.

Hi,
Thanks for you reply.
We are trying to Run/deploy the application in jdev 11.1.1.1.2.0 that was developed in jdev 11.1.1.1.0. We are getting the following exception,
<Nov 25, 2009 6:38:22 PM MST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1259199473394' for task '0'. Error is: 'java.lang.ClassNotFoundException: javax.faces.context.FacesContextFactory'
java.lang.ClassNotFoundException: javax.faces.context.FacesContextFactory
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.faces.context.FacesContextFactory
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
Truncated. see log file for complete stacktrace
But the same application with some other system is working fine.

Error while creating an application in NWDS CE 7.1

Hi ,
I am unable to create applications and components for and webdynpro application in NWDS CE 7.1 .
Its giving me the following error .
Status ERROR
Plugin : com.sap.ide.webdynpro.service.applicationmodeler
code=0
Internal error
   Plugin name: Web Dynpro Application Modeler Services
   Internal error : com.sap.ide.webdynpro.service.applicationmodeler
   Class      : com.sap.ide.webdynpro.service.appmod.wizards.comp.ComponentWizard2
   Method     : performFinish
   Message    : Exception occured
   Exception : com.sap.ide.mmservices.wd.general.NoWebDynproContentException: No Web Dynpro content found for project "sample". If this project is a Development Component, check if "SapMetamodelWebdynproContent.zip" is present in the classpath.
com.sap.ide.mmservices.wd.general.NoWebDynproContentException: No Web Dynpro content found for project "sample". If this project is a Development Component, check if "SapMetamodelWebdynproContent.zip" is present in the classpath.
at com.sap.ide.mmservices.wd.view.ViewElementService.getLibraries(ViewElementService.java:2042)
at com.sap.ide.mmservices.wd.component.ComponentService$ComponentCreationService.doExecute(ComponentService.java:249)
at com.sap.ide.mmservices.core.AbstractMMService.execute(AbstractMMService.java:103)
at com.sap.ide.webdynpro.service.appmod.wizards.comp.ComponentWizard2.createComponentInternal(ComponentWizard2.java:305)
at com.sap.ide.webdynpro.service.appmod.wizards.comp.ComponentWizard2.doPerformFinish(ComponentWizard2.java:147)
at com.sap.ide.mmservices.core.eclipse.ui.WizardWithContainerRunnable$MyRunnable.run(WizardWithContainerRunnable.java:61)
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:369)
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:313)
at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:934)
at com.sap.ide.mmservices.core.eclipse.ui.WizardWithContainerRunnable.performFinish(WizardWithContainerRunnable.java:27)
at com.sap.ide.webdynpro.appeditor.wizards.CreateAppWizard.doPerformFinish(CreateAppWizard.java:157)
at com.sap.ide.mmservices.core.eclipse.ui.WizardWithContainerRunnable$MyRunnable.run(WizardWithContainerRunnable.java:61)
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:369)
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:313)
at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:934)
at com.sap.ide.mmservices.core.eclipse.ui.WizardWithContainerRunnable.performFinish(WizardWithContainerRunnable.java:27)
at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:742)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:373)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:616)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:820)
at org.eclipse.jface.window.Window.open(Window.java:796)
at com.sap.ide.webdynpro.appeditor.AppCallback.callCreateApplicationWizard(AppCallback.java:40)
at com.sap.ide.webdynpro.service.appeditor.ApplicationCaller.createApplicationWithUI(ApplicationCaller.java:28)
at com.sap.ide.webdynpro.service.appeditor.ServiceWithUI.createApplication(ServiceWithUI.java:108)
at com.sap.ide.webdynpro.service.appeditor.ServiceWithUI.createApplication(ServiceWithUI.java:65)
at com.sap.ide.webdynpro.wdexplorer.actions.creation.CreateApplicationAction.runCreation(CreateApplicationAction.java:24)
at com.sap.ide.mmservices.core.eclipse.ui.actions.contextmenu.BaseCreateDevelopmentObjectAction.run(BaseCreateDevelopmentObjectAction.java:27)
at com.sap.ide.tools.core.viewerfwk.internal.actions.BaseDelegateSingleAction.runInternal(BaseDelegateSingleAction.java:65)
at com.sap.ide.tools.core.viewerfwk.internal.actions.BaseDelegateSingleAction.run(BaseDelegateSingleAction.java:58)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:256)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:545)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:490)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:402)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:153)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:504)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:443)
at org.eclipse.equinox.launcher.Main.run(Main.java:1169)
at org.eclipse.equinox.launcher.Main.main(Main.java:1144)
Please help to solve this issue.
Thanks & Regards,
Hamsa Shree

Hi,
I think, you have not installed NWDS 7.1 properly.
In update site step after installation, You have not selected the dsired features.
Make sure that you have followed all the stpes given below.
"Installation of SAP NetWeaver Developer Studio
1.       Log on to your PC with administrator privileges.
2.       Start the installer for SAP NetWeaver Developer Studior and choose Run this program from its current location in the upcoming pop-up window.
The user interface of the installer will lead you through the following steps:
Enter an installation directory.
Enter/confirm the desired Java Runtime Environment
Install the NetWeaver Developer Studio Platform.
After the installation of the platform, choose an Update Site (in this version your local download directory) and install NW Developer Studio features from this update site. If you are not sure what to install, select all features.
You will be prompted to install the selected features. Press Yes. After installation you will prompted to restart NWDS.
Thanks

Build Error While importing standard application into NWDS

Similar Messages

Maybe you are looking for