Build using 32-bit Sun JDK in dev windows OS and deploy in 32-bit RHEL

Is there any potential problems associated with building/compiling my Java classes for my EE (Seam) app into an EAR and deploying on 32-bit Windows OS JBoss AS dev box using 32-bit Windows JDK 1.5 and then deploying the same EAR into 32-bit RHEL OS JBoss AS? The dev envmt is not clustered and the UAT RHEL envmt is a 2 node horizontal cluster without state replication (only mod_jk load balancing and failover).
Perhaps the entity (and other) classes that implement java.io.Serializable will have issues? thx.

Note: This thread was originally posted in the Serialization forum, but moved to this forum for closer topic alignment.

Similar Messages

For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup.

For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup. Setup installs iTunes in the 32 bit application directory (Program Files x86) - it's not all that unusual to run a 32 bit app under a 64 bit OS - BUT whenever I connect any of my iPhones, I get an error message that say I cannot use the iPhone because the 64 bit version of iTunes is not installed. The message then tells me to de-install iTunes and to install the 64 bit version.
Like I say, the 64 bit Setup version is selected for me, and it runs error-free, but I seem to have no control or ability to force the installation of a 64 bit iTunes app. And all the iPhones are inoperative with the 32 bit version I have. I have another PC, which I have held at an earlier iTunes release. Although it's a notebook, it's identical in every other way (OS & installed utilities and apps) to the desktop that has developed the problem, and my iPhones work fine with it, although iTunes on it is at the earlier release, and I have no intention of upgrading that version until I understand and have corrected the problem.
Any ideas or suggustions?
Thanks.

This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.
That usually indicates that your Apple Mobile Device Support has not installed. That's also what is being shown by the diagnostics (the driver is there but the application isn't).
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Hello alltogether! I use PSE 7 on my PC with windows XP and now want to change to a new Mac with the

Hello alltogether! I use PSE 7 on my PC with windows XP and now want to change to a new Mac with the newest version PSE . Is it possible to move all my albums and tags to that new version? Thank you very much for your kind answers! Candyapple111

1. Install PSE 11 in windows, upgrade your catalog, then make a full backup to a removable drive, like a usb drive, using the organizer's back up command. If you buy the boxed version you get discs for both platforms.
2. Install PSE on the mac.
3. Restore the backup to the mac. Point the restore to the .tly file in the folder, not the enclosing folder.

Can i use one license of creative cloud on windows workstation and mac laptop?

Can i use one license of creative cloud on windows workstation and mac laptop?

Yes.
http://www.adobe.com/au/products/creativecloud/faq.html
"Are there any unique benefits that come with my paid membership?
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information."

Can sun jdk 1.5 for webstart and sapjvm co-exist on the same server?

We just installed PI 7.1. We would like to install sun jdk 1.5 on the PI 7.1 server so we can use the pi tools on the server, but we are not sure if sapjvm and sun jdk can co-exist, or if it's going to cause any problem with PI 7.1, any setting is needed to tell PI which java to use if multiple version is installed? Does anybody know?
Thanks
Jane Zhou

Kaushal,
Thanks for the reply. note 718901 mentioned to change the jdk version, parameter jstartup/vm/home in instance profile can be used. if that's the case, that should be how we tell PI system whch jdk to use? in PI 7.1, it's point to DIR_SAPJVM, which points to sapjvm_5 in \exe directory. The notes you mentioned all apply to versions before 7.1, I'm wondering if it still works the same way with 7.1 systems.
Has anybody installed a sun jdk on PI 7.1? anything that we need to pay attention to?
Thanks
Jane

Using J2EE 1.4 Beta 2 on Windows 98 and Windows Me

I know J2EE isn't supported on Windows 98 and Windows Me, but like many others I've been able to get J2EE 1.3.1 and J2EE 1.4 Beta to work quite well on Windows 98 and Windows Me. However, no such luck when I tried to do the same with J2EE 1.4 Beta 2. Basically, after downloading j2eesdk-1_4-beta2-windows-eval-app.zip, extracting it into C:\j2ee_app_win, and double clicking setup.exe (or setup.dos.exe for that matter), the setup GUI doesn't appear. Has anybody gotten passed this point and gotten it to work?

Basically, J2EE 1.4 Beta 2 setup.exe doesn't work on Windows 98 or Windows Me even with 256 MB of memory. You'll see it appear on the task bar and then disappear right away. The setup task keeps running, so you have to kill it with Ctrl-Alt-Del.
However, J2EE 1.4 Beta 2 does work quite well on Windows XP Home Edition even though it's not supported by Sun. So if you don't have Windows XP Professional or Windows 2000, you can at least try it.
For help installing and getting started with J2EE 1.4 Beta 2 on Windows XP, see http://groups.msn.com/J2EETools.

Using Shared Review via Network Folder on Windows server and PC and Mac users commenting

We are having initiation and connection problems on the Macs (running OS 10.6.4 Snow Leopard) with Shared Reviews (from Acrobat 9) that are stored on a Windows 2008 Server connecting via SMB. I would be very interested to hear from anyone who is successfully:
1) Initiating Shared Reviews from a Macintosh via "Automatically collect comments on my own internal server" and navigating to a folder (with full read/write permissions for all) on a Windows server. We cannot get Acrobat (via the automated SR set-up wizard) to verify the network folder location on the Macs so that a Mac user can initiate a Shared Review. On Windows (using Parallels or logging in to a PC directly), the same users have no problem initiating and accessing Shared Reviews.
2) Accessing Shared Reviews on a network folder (set up on a Windows 2008 server) via a Mac running OSX 10.6.4 and Acrobat 9. All users have read/write access to the folder and can navigate to it via the server. They can save documents to the network folder and open other documents there as well. When they open a Shared Review-enabled PDF for commenting, they get the error message that Acrobat cannot connect to the server. Retry results in the same error message.
We use Shared Reviews extensively and have no problems with PC users accessing the files and Mac users accessing them via Windows (Parallels or on a PC). This is very frustrating so I would really appreciate any ideas, especially if anyone is actually doing Shared Reviews this way.
Thanks.

Unfortunately, this is NOT fixed based on the testing I have done.
1) I am still unable to connect to the network folder on a Windows server from the Mac to initiate a Shared Review In Acrobat version 9.4.6. Same error message as previous Unable to locate server. See screenshot:
2) One of the Mac users (also upgraded to Acrobat 9.4.6) who was invited to participate in a Shared Review (initiated using Parallels/Windows) was initially able to open the file and Publish comments. However, after she did and closed the file, she was unable to reopen the same file, connect to the server and add comments. And no other Mac user could access the file after she added her first comments. We all got the error message "Unable to connect etc" See screenshot.
3) I opened the same file in Parallels/Windows with no problem. However, the Mac user's comments were not there. I could add comments and publish in Windows.
4) When I tried to access the Tracker from my Mac (review was initiated via Parallels), I got the error message File not Found when I tried to access the test review via my Mac (see screenshot).
Could you give me more information about the fix? I would also be happy to talk to you or send more details if that would help.
Our set up has not changed from the original information I sent (there may have been some Mac updates -- we are all on OS 10.6.8 but still Snow Leopard). Server has not changed.

I am using Outlook 2010 on a PC with Windows 7 and was effectively using iclould to synch it with my ipad and iphone. Within the last month the connection to icloud stopped working.

I can still see Icloud contacts and calendar on my outlook, but it is not synching with the cloud. I can't seem to pinpoint when it stopped working. Help!

Are you sure that you have the iCloud control panel downloaded and installed?
You should also check the iCloud add in. Click the File menu. Then click Options in the left panel of the Outlook window. Click Add-Ins in the left panel of the Outlook Options window. Look at the list of add-ins beneath "Active Application Add-Ins" make sure "iTunes Outlook add-in" and "iCloud Outlook Add-in" are selected.
To add enable the add-ins, in the Manage box at the bottom of the Outlook Options window, select COM Add-Ins, and then click Go. In the COM Add-Ins dialog, navigate to the iCloud add in and and you should be able to enable them.
Once you have the refresh button, the push connection is ON again
Let me know if it work

Can be use SAP Crystal Presentation Design 2011 in Windows 8 and Microsoft Office 2013?

I had problems in converting a design to a presentation in Power Point, but I have no problems in Word and PDF, why?

Hi Marco,
Please repost to the BI Dashboards space.
-Abhilash

I'm using Firefox 3.6.23 on my windows 2000 and lately i've been having issues with web pages loading and need help figuring out why.

Some of the issues : '''1'''. Page loads blank showing web address in tab. Try reloading usually with no results.(problem have the most!) '''2'''. Message appears "problem loading page, server not found" (diff times & diff websites). '''3.''' Pg with msg "oops link broke, DNS error, server not found" then lists suggested links to sites for fix though all links connect to site IGEARED.COM. (new issue) I don't know what to do please help me identify and fix my issue(s) in english, kind of a newbie : ). thx

Try this.
Type in the address bar about:config.
Accept the warning.
In the page that appears, in the Filter box, type network.http.max-connections. Change the value to 32 (which is probably set to 256 in your case).
Close that page. Restart the browser.

I used to have a Dell laptop with windows 7 and it broke. I now have a Samsung Galaxy note 10.1 can I retrieve my Mozilla Firefox and Thunderbird accounts?

I would like to retrieve my account information and emails

Do you have access to the contents of the dells hard drive?
Did you set up sync in Firefox?

Windows 8/8.1 32/64 bit Drivers for Satellite P100/P105 Users

I made an original post with my now ancient Satellite P105-S9722 back in 2009 & 2011 for Windows 7 64-bit drivers. Windows 7 Drivers for P100/105 Systems
Now that I have newer systems, I have experimented loading Windows 8 & 8.1 in my P105-S 9722 system. Wanted to share some observations and any issues I came across.
I have listed here some basic drivers you can use for your P100/P105 systems for Windows 8 and 8.1 and 32/64-bit to work. Many of these listed are from other users, but there may be some additional drivers many may not know about. I can't guarantee that all of these will make your system work 100%, but hopefully this will make your upgrade just a little quicker & easier.
Before using these driver, I recommend you do a fresh install of Windows 8 or 8.1 32 or 64-bit regardless if you are using XP, Vista or 7 32 or 64-bit systems.
Now I did use an installation DVD instead of a flash drive since you may need to add additional features to make certain programs work.
After installing the Operating System (OS), immediately go to Programs and Features in Control Panel . Make sure to turn on the .NET Framework 3.5 (includes .NET 2.0 and 3.0). You will need this to install some of the Toshiba utilities.
Many of the native drivers for Windows 8 & 8.1 will automatically be installed. The wifi driver should work. I am using a Sparklan GN-WS30N 802.11n using Ralink RT2860 chipset that works in 8 & 8.1.
SOUND CARD: The biggest issue of Windows 8 & 8.1 32/64-bit is that there is no sound. The old Audio 4.8.0.0 driver is the only driver that still works in Windows 8 & 8.1. There are much newer versions, but for some reason, the old driver works the best.
1) Download the driver.
2) right click the file to extract it to a folder of the same name (do not double-click as the automatic installation will fail)
3) double-click on folder Audio4.8.0.0, then double-click again on subfolder Audio4.8.0.0 if present
4) double-click on folder BD1-BH1
5) double-click on folder VXP64
6) recommend to double-click on file BD16HAa.inf to check if your sound Hardware ID is listed under [Conexant.NTAMD64], should be HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31
7) close BD16HAa.inf file if opened in step 6, then simply double-click Setup64.exe
8) restart system (although audio may work right away, always a good idea)
See Audio 4.8.8.0.zip Download on Bottom of post
SYNAPTIC TOUCHPAD: If your P100/P105 has a dual Synaptic touchpad like mine, the driver does work in WIndows 8/8.1, BUT you still need the utility to make it work.
Download: Toshiba Touchpad
Here's the thing with the Toshiba file, when you save it or run it, it unzips the folder into the TEMP folder. When you go to run it, the main setup will work. In case the autorun does not work, here's what you need to do:
1) Change you folder selection so you can show hidden folders & files
2) After unzipping the file, open C:\Users\"YOURNAME"\AppData\Local\Temp\Synantec Touchpad.temp
3) Click on "Setup" icon to run the file. (This file worked just fine on my P105-S9722 machine)
PCMCIA/Express Card/SD (TI) CARD READER - This driver will allow the PCMCIA, Express Card & SD Readers work normally on Windows 8/8.1.
There is issue with the Texas Instruments PCIxx12 Integrated FlashMedia Controller. I did find a driver the does work:
Download: Texas Instruments PCIxx12 Integrated Flashmedia Controller
Nvidia Video Card - After loading the OS, the maximum resolution on the native drivers is only 1024 X 768. In order to get the maximum resolution of 1440 X 900, a NVidia driver is required.
Download: Nvidia GeForce Release 179
Once this is loaded, use Windows Updates to download the most recent drivers. Windows 8.1 definitely has a newer driver. It is a good idea to download the NVidia GeForce Experience so that newer drivers can be installed: Nvidia GeForce Experience
Fingerprint Reader (Biometrics Devices) - The Upek driver only goes up to Windows 7, but Windows 8/8.1 does have a native driver through AuthenTec that does work. The Toshiba fingerprint utility will be needed in order to user the fingerprint reader. The Toshiba Utility can be downloaded here:
Upek Fingerprint Driver 5.8.0.4024
The utility should work with the native driver.
That's pretty much it for the basic drivers. I did not include LAN or Wireless Drivers.
Finally make sure the most recent Bios are installed v4.70: http://cdgenp01.csd.toshiba.com/content/support/downloads/sp100v470.exe
There are attachments and links, but let me know if anyone is not able to download or use any of these links posted.
Current Issues & Observations: After I shut the computer down, when I open the screen, the computer automatically turn on. I haven't figured that out yet, but I'm sure I'll post a fix in the near future. The computer definitely boots much faster compared to Windows 7 and I've upgraded the older spinner drive with a Sata III SSD Drive. Even with only 4GB of memory and the first generation Duo Core processor, P105-S9722 is still running well.
I may do another post if I decide to try out WIndows 10, but for now, it's nice to know that even though the old P100/P105 systems do not support anything over Windows Vista, we can use the contempory software on a system almost 10 years old.
Good luck.
Attachments:
Audio4.8.0.0.zip ‏9134 KB

That should work as well for all the models in part-number family PSCJEU. At least these, probably more..
    Satellite C55-A5104 (PSCJEU-00K00R)
    Satellite C55-A5105 (PSCJEU-00K018)
    Satellite C55-A5180 (PSCJEU-00F001)
    Satellite C55-A5190 (PSCJEU-00L001)
    Satellite C55-A5140 (PSCJEU-00K001)
    Satellite C55-A5137 (PSCJEU-036012)
    Satellite C55T-A5123 (PSCJEU-01G00Q)
-Jerry

OSM 7.03 build and deploy

We have installed the OSM server on Solaris Sparc server with 10.3.1 Weblogic server. The Eclipse is installed on the Windows machine which has 10.3.3 weblogic. Will building the cartrdiges with 10.3.3 weblogic lib files and deploying them on to a server which is 10.3.1 cause any issues?

None of the Weblogic files referenced by Design Studio are bundled into the automation plugin files that are deployed to the server, so it shouldn't cause any issues. That being said, the safest (and supported) approach would be to have the same WLS version in both places.
Generally we would recommend customers use WLS 10.3.3 if you are on OSM 7.0.3.x. There are a number of important fixes in that release that are important to consider.
Brian.

32-bit version odbcad32.exe (C:\windows\syswow64)

1.     By default on any 64 bit machine, 64-bit version of odbcad32.exe (C:\windows\system32) is used.
2.     It is also correct that one can use 32-bit version odbcad32.exe (C:\windows\syswow64) and add DB entries in System DSN .
3.     But, even following Step 2, given above, Alter audit report is failing out.
4.     It would be great help, if you let us know what additional step she used to run Alter audit report in WINDOWS 2008 R2 server.

PeopleSoft client tools such as application designer, datamover, etc run on 32 bit, where as PeopleTools is installed on 64 bit servers.
You need to add a system DNS for both 32 bits as 64 bits.
The 32-bit version of the Odbcad32.exe file is located in the %systemdrive%\Windows\SysWoW64 folder.
The 64-bit version of the Odbcad32.exe file is located in the %systemdrive%\Windows\System32 folder.
This is also stated in the installation manual of PeopleTools, Appendix B Installing a database manually
Snipet from the installation manual:
Task B-2: Configuring an ODBC Data Source
Now that you have established your database name and location, you can set up an ODBC data source on the database client.
Note. With Microsoft SQL Server 2005 and above a new connectivity driver was delivered for Microsoft SQL Server databases named “Sql Native Client” or SNAC. Ensure that you use this driver during installation.
If you are running on a 64-bit machine, confirm that you are using the correct connectivity drivers. PeopleSoft PeopleTools executables are 32-bit, but can be run on a 64-bit machine. If you are running on a 64-bit
operating system you still need to utilize the 32-bit connectivity drivers for PeopleSoft PeopleTools. Use this information to verify that the ODBC Data Administrator odbcad32.exe is running from the correct
location. The ODBC Data Administrator resides in the following two locations on a 64-bit Microsoft Windows machine:
• The 32-bit version odbcad32.exe is found in C:\windows\syswow64: This is for 32-bit applications running on a 64-bit operating system. This is the correct version for PeopleSoft PeopleTools.
• The 64-bit version odbcad32.exe is found in C:\windows\system32: This is for 64-bit applications running on a 64-bit operating system.
When you run odbcad32 on a 64-bit Microsoft Windows machine (Start, Programs, Control Panel, Administrative Tools, ODBC Data Administrator), the 64-bit version of odbcad32.exe (C:\windows\system32)
is used by default. In order to run 32-bit PeopleSoft PeopleTools, be sure to include a System DSN entry for the 32-bit version odbcad32.exe (C:\windows\syswow64).

If I use an SD card for both Windows 7 and Mac, is there any way to see the documents from the Mac sight while on the windows side?

If I use an SD Card on both the windows 7 and Mac OS (using bootcamp), is there any way to see the data seen on the Mac OS side while using the Windows OS?

Windows Aero style uses a different background image than Mac:
Windows Aero:
#nav-bar {
background-image: linear-gradient(rgba(253,253,253,0.45), rgba(255,255,255,0));
Mac:
#nav-bar {
background: url(chrome://browser/skin/Toolbar-background-noise.png),
linear-gradient(hsl(0,0%,93%), hsl(0,0%,83%));
I can't test hands on, but you might be able to clear that OSX "fog" using a rule such as:
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#nav-bar, #PersonalToolbar {
background-image: none !important;
background-color: transparent !important;
This could be applied using the Stylish extension or by creating/editing a userChrome.css file.

Build using 32-bit Sun JDK in dev windows OS and deploy in 32-bit RHEL

Similar Messages

Maybe you are looking for