Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record

Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record. When I Delete any Record in Source Table, I expect the same record should be 'Expired' with 'End_Date' with Active = 'N'.
BTW: In 'Table Comp', I have Checked the 'Detect Deleted rows(s) ...'. / ' ... largest generated key' is selected by default..
This is not happening..! My Update and Insert works fine..!

Hi
Do you have detect deletes set on Table Comparison?
I also add the Map operations to the output of History Preserving and manage each stream of the Insert/Update/deletes separately and control the record start/effective & record end/Expiry dates with more variables based on the stream req, ie updates to end previous record have record end date set to variable for business or run date set to date - 1.
You only need key gen for inserts (including the deleted record final state)
Use merge to bring back together.

Similar Messages

HT204053 I just changed my Apple Password and icloud does not recognize the password.

I just changed my Apple Password and icloud does not recognize the password.

To change it on your iPhone you have go to Settings>iCloud and delete the account, then set it up again with your new credentials. When you delete the account from your phone it will delete any data you are syncing with iCloud (such as contacts and calendars) from your phone but it will remain in iCloud. Provided your are signing back into your existing account and not changing to a new account, it will be synced back to your phone when you sign back in.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

TS1646 When I try to buy music, I get message saying that my credit card information does not match the bank records. My information, formatting are exactly the same as the bank. Help!

When I try to buy music, I get message saying that my credit card information does not match the bank records. My information, formatting are exactly the same as the bank. Help!

Look on one of your bank statements and be sure to enter the billing address exactly as it shows on the statement. Some folks forget where they actually get the statement. They put their home address in iTunes/Mac App Store and they actually get the statement at their place of employment or vice versa.

Trying to purchase an app from iTunes but it keep prompting to check my payment details . Apparently my address does not match the bank records

I just got the iPhone 4. Trying to purchase apps, but keep getting prompts- that he billing address does not match the bank records. Fred close to 20 times. Frustrated !! Am travelling today for 2 weeks. Need this sorted ASAP .

Contact the support staff for the stores at: http://www.apple.com/emea/support/itunes/contact.html

Table compare deleting rows which does not exist in target table

Hi Gurus,
I am struggling with an issue in Data Services.
I have a job which uses Table Compare, then History Preserving and then a Key Generation transforms.
There is every possibility that data would get deleted from the source table.
Now, I want to delete them from the target table also.
I tried Detect deleted rows but it is not working.
Could some one please help me on this issue.
Thanks,
Raviteja.

Doesn't history preserving really only operate on "Update" rows. Wouldn't it only process the deletes if you turned the "Preserve Delete row(s) as update row(s)" on?
I would think if you turned on Detect Delete rows in the Table compare and did not turn this on in the history preserving it would retain those rows as delete rows and effectively remove them from the target.
Preserve delete row(s) as update row(s)
Converts DELETE rows to UPDATE rows in the target warehouse and, if you previously set effective date values (Valid from and Valid to), sets the Valid To value to the execution date. Use this option to maintain slowly changing dimensions by feeding a complete data set first through the Table Comparison transform with its Detect deleted row(s) from comparison table
option selected.

Tuple Record deleted in MDM does not reflect in ECC

Hello Experts,
We have a scenario for central creation of Material master data in SAP MDM 7.1 and syndication to SAP ECC system. We are using tuples for Long text & Alternate unit of measure.
The problem is as below:
If we create a material with 1 or more tuple records for Long text & Alternate unit of measure and syndicate it, it gets created in the SAP ECC system properly.
If we add 1 more a tuple record it gets updated successfully.
But if we delete a record from the tuple for same material and save and syndicate it, it does not get updated in the SAP ECC system.
Please help!
Thanks in Advance
~ Suraj Sawarkar

Hi Suraj,
Or is there some other thing amiss?
Can you please revert with whether this Tuple node Property is required or not in MDM syndicator. I mean in MDM Syndicator-->under Destination Items Tab, Property Required is Ticked in Check box or not.
As I am able to figure it out that this may be one reason, If this is not ticked in check-box then this tuple node will not generate if it does not have any values. I mean in case if you delete tuple record in MDM a file will get syndicated out of MDM without these Tuple nodes. Thus would not able to pass Null to target side structure of IDOC and therefore your Tuple record is not getting deleted in SAP ECC system.(R/3 side). So please make sure that this Tuple nodes must be generated even if it carries blank values (nothing) in syndication files so that you can map with required target structure of ECC IDOC to pass these blank values.
Regards,
Mandeep Saini

Updating CV (delete entry which does not match the criteria any more)

Hi,
A MV synchronises entries in a CV (MVtoCV) depending of a criteria (flag). OwnerShip=Meta view.
An MVentry is created.
If this MVentry doesn't match the criteria, not synchronized in the CV=OK
If this MVentry matchs the criteria, synchronized in the CV=OK
If this entry is deleted from the MV, deleted in the CV=OK
BUT
An MVentry is created.
If this MVentry matchs the criteria, synchronized in the CV=OK
if this MVentry doesn't match the criteria any more, the CVentry is still not synchronized=OK BUT remains on CV (my problem).
HOW to remove this entry automatically.
I tested with AttFlow and delete operation but without success.
Thanks for your help

Our approaches are actually the same. but BKBK goes further. The onMissingTemplate method will never fire in this case, as the page you're rewriting to actually exists, so what you're doing here is manually raising a 404. There are two ways of doing this; firstly you just do something like this:
<cfif FoundItems.RECORDCOUNT EQ 0 >
<cflocation url="/404.cfm" addtoken="false" statuscode="404" />
</cfif>
This will let people know that they've entered an invalid URL, and the statuscode will tell search engines that there's no page there.
What BKBK is suggesting is perhaps being more intelligent. Rather than just throwing them at a standard 404 page, try and handle it a little better. In your page where you would normally show the results, try and find any relevant results. See if there are any keywords in the URL you can search the database for, and display the links to those products on the page. Nothing groundbreaking here, just something a little more "web 2.0" than just saying "no, there's nothing here".
The only difference would be that you want to do this:
<cfheader statuscode="404" />
...before then going on to display your page. This is purely for the search engines.
Hope that explains it a little.
O.

Changing Position property of Binding Source does not take effect

I have a BindingSource, let's call it myBindingSource, whose DataSource is a List(Of myClass). There are several lines in the existing code that set the Position property of the BindingSource object and the set is effective, e.g. if
the Position value is 0 and I do this...
myBindingSource.Position = 1
...I can check the value of myBindingSource.Position and it is 1. However other times (and it may only be when the current value is -1) when I do such a set, nothing happens. The Position value remains at the previous value, e.g. after the above
line, SpecimenNavSource.Position is still -1. I have verified that at that point, the SpecimenNavSource.Count is greater than the value I'm setting, so it's not that it can't find something in that position.
Any ideas would be greatly appreciated.
Thanks.
mamacasc

Hello,
Here is a small demonstration project which has a BindingNavigator placed on the form. Pressing Button1 at any position will move bsData to position 0. With that can you show if different from the below what you are doing?
Public Class Form1
Private bsData As New BindingSource
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Dim People As New List(Of Person) From
New Person With
{.FirstName = "Karen", .LastName = "Payne"},
New Person With
{.FirstName = "Jim", .LastName = "Smith"},
New Person With
{.FirstName = "Mary", .LastName = "Olson"}
bsData.DataSource = People
AddHandler bsData.PositionChanged,
Sub(s As Object, ea As EventArgs)
Me.Text = bsData.Position.ToString
End Sub
BindingNavigator1.BindingSource = bsData
DataGridView1.AllowUserToAddRows = False
DataGridView1.DataSource = bsData
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
bsData.Position = -1 ' postion is set to 0
End Sub
End Class
Public Class Person
Public Property FirstName As String
Public Property LastName As String
Public Sub New()
End Sub
End Class
Lastly, I peeked at BindingSource.cs, source code for BindingSource and there is nothing there to allow moving below position 0.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Deleting calendar invites does not remove the event from calendar

i regularly get calendar invites that i do not want cluttering my calendar. on my PC, i can easily delete or decline them without sending a response, which is the easiest way to deal with them. but if i open the invite mail message on my iphone, the event gets added to my calendar automatically. what's worse, if i delete the email message containing the invite, the event stays on my calendar. if i tap the event, i'm given the choices of accept, maybe, or decline. if i decline, it sends a message to the organizer. this actually leads to more problems, like a senior person wondering why i declined their event, or a junior person sending invites to the entire office and complaining about all the declines. it's even worse if a client sends an invite for a project i'm not involved with.
is there some setting i need to enable to ensure that when i delete an email containing a calendar/outlook invite, the event is deleted (or better yet, never added) to my calendar?

Why has no one helped? This is a reasonable question but all similar strands are left unanswered. Why wouldn't people want to hold on to the information about old appointments?

My icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

my icloud account on my new iphone does not match the user ID for itunes as it is an old apple ID. There is no password for this ID so I cant change it and it wont let me change the apple ID. Any help?

To change to iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID then sign in with the new ID. If you don't know the password for the old ID, and if the old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Hello, I'm using Mountain Lion and mail does not leave the mails on the server, either on iCloud nor on other suppliers (orange). They are both using iMap protocol... Any place where I could change this ? Thanks for any hall; Christian

Under what circumstances does mail "not leave the mails on the server"?
If you mean that you delete them (or move them out of the inbox) on one device and then find them not in the inbox on the server when you look from another device, that's how IMAP is supposed to work. (Note that the deletion or moving might be the result of rules you have set up in Mail.)
If you mean something else, please explain your issue in more detail.

My i phone 4s will let me download free apps but when i try to buy an app it asks for my billing imformation and tells me that the. Imformation i typed in does not mach my bank records. Ive also tried using my wifes. Any ideas

When i try to buy an app from the app store it ask for my billing imformation and when i type everything in it tells me the imformation does not match my bank records. Ive also tried using my wifes card to buy apps and it says the same thing. Any ideas?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Are you putting in the address where the bank sends the monthly statement?
Apple's servers are very picky about the format of the address. If you live in the USA, then the server is expecting the style that the US Postal Service uses. One way to do this is to use the USPS ZIP Code lookup service;
https://tools.usps.com/go/ZipLookupAction!input.action
Enter the address to look up the ZIP code and then copy the exact USPS output into your iTunes account information.

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?

Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G.

How to spend 0.20 in itunes? I need to change my country and itunes does not allow me because I have 0.20 left to spend. I can't purchase any more credit because I'm not in the US any more and Itunes just accept those. I need help!

I need to change my country and itunes does not allow me because I have 0.20 left to spend. I can't purchase any more credit because I'm not in the US any more and Itunes just accept those. I need help!

Click here and request assistance.
(65879)

Building SCD Type2 changes. Any record deletion in Source does not expire the Target Record

Similar Messages

Maybe you are looking for