Bulk editor is not returning values for default properties

..even though the content nodes have a value for this property. CQ version is 5.5.
I need to export a report of all user generated content from /content/usergenerated/content/<sitename>/en. This is the root path.
The query parameter I have specified is "type:Rating". By default the "sling:resourceType" is selected. No other custom properties are specified in the interface.
The search returns the nodes of this type, but the results do not return a value for the "sling:resourceType" for these nodes.

It should work. Might be you do not have data. Is the results shown as zero records?

Similar Messages

  • ACE snmpwalk not return values for CISCO-SLB-MIB

    Hi everyone,
    I need some help with snmp for the ACE. I am unable to get any results when running an snmpwalk for the object slbVServerClientByteCounts.
    In fact, I get no results for anything related to CISCO-SLB-MIB. I can run an snmp translate against this mib and I am able to get the OIDs but when I run an snmpwalk against the ACE I get nothing for this mibs. I do however get results for the mibs: SNMPv2-SMI, IF-MIB, IP-MIB etc..etc..
    My main goal is to get the traffic going to the virtual server vip and then graph it. I need to use the CISCO-SLB-MIB to do this.
    Can someone please help? I will try and answer your questions to the best of my knowledge.
    Thank you.

    Ok I fully understand. I have verified that I have only one context (Admin).
    Would you be able to explain why I am able to see some oid data and nothing for others? Your results for oid slbVServerClientByteCounts is exactly what I am looking for.
    This is what I have:
    snmpwalk  -v 2c -c xxxxx 172.16.14.100  1.3.6.1.4.1.9.9.161.1.4.2.1
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.39 = STRING: "Port80"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.40 = STRING: "Port100"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.41 = STRING: "Port1010"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.42 = STRING: "Port21"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.2.1.43 = STRING: "Port444"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.3.1.39 = STRING: "test"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.3.1.40 = STRING: "test"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.3.1.41 = STRING: "test"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.3.1.42 = STRING: "test"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.3.1.43 = STRING: "test"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.4.1.39 = INTEGER: 2
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.4.1.40 = INTEGER: 2
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.4.1.41 = INTEGER: 2
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.4.1.42 = INTEGER: 1
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.4.1.43 = INTEGER: 1
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.5.1.39 = STRING: "Operational"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.5.1.40 = STRING: "Operational"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.5.1.41 = STRING: "Operational"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.5.1.42 = STRING: "No Active serverfarm(s) in Policy"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.5.1.43 = STRING: "No Active serverfarm(s) in Policy"
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.6.1.39 = Gauge32: 134
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.6.1.40 = Gauge32: 25
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.6.1.41 = Gauge32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.6.1.42 = Gauge32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.7.1.39 = Counter32: 510534985
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.7.1.40 = Counter32: 26901235
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.7.1.41 = Counter32: 86784
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.7.1.42 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.7.1.43 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.8.1.39 = Counter32: 128982
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.8.1.40 = Counter32: 3167
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.8.1.41 = Counter32: 7
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.8.1.42 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.8.1.43 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.9.1.39 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.9.1.40 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.9.1.41 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.9.1.42 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.9.1.43 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.10.1.39 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.10.1.40 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.10.1.41 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.10.1.42 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.10.1.43 = Counter32: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.11.1.39 = Counter64: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.11.1.40 = Counter64: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.11.1.41 = Counter64: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.11.1.42 = Counter64: 0
    SNMPv2-SMI::enterprises.9.9.161.1.4.2.1.11.1.43 = Counter64: 0

  • The LOV modal window could not return value to the base page

    when practicing the "create1" task in tutorial, met an issue.
    when create an employee, manageName is a messageLovInput and managerID is a messageTextInput.
    The issue is the LOV modal window could not return value to the mangerName, but can return to managerID .
    If I remove the data boud porperties of the managerName (the bc4j porperties of view name-EmpFullVO and view attribute-MgrName), the lov works fine.
    What is the reason?

    James I would suggest to read the LOV topic in OAF developers' guide. Lov mappings are responsible for bringing pop up values to base page in LOV.
    --Mukul                                                                                                                                                                                                                                                                                                                                                   

  • Function not returning value in Discoverer report

    Hi All,
    I am using a PL/SQL function in a Discoverer Report to return a particular date. The way I am using is that I have created a PL/SQL function and registered the same in Discoverer Administatrator.
    My problem is that when i run the report this function returns NULL for one particular unit but when i run the same on toad as
    'select max_term_dt_pkg.max_term_dt_fn('703813','OM - AWAITING_SHIPPING - 1179628') from dual'
    it returns the date as 26-May-2009
    Actually it should return a value in the report also.
    Can anyone guide me what could be the problem.
    Regards,
    Shruti

    Hi Rod,
    There are no session variables to be set. I have myself created that and it is returning values for other units also.
    Below is the function :
    CREATE OR REPLACE PACKAGE BODY APPS.max_term_dt_pkg
    AS
    FUNCTION max_term_dt_fn (p_unit_num VARCHAR2, p_order_status VARCHAR2)
    RETURN DATE
    IS
    l_contract_number VARCHAR2 (20);
    --okc_k_headers_b.contract_number%TYPE;
    l_max_term_date DATE; --okc_k_lines_b.date_terminated%TYPE;
    BEGIN
    IF p_order_status IN ('RMA on Unit', 'OKS 30 Days Notice Given')
    THEN
    l_max_term_date := NULL;
    ELSE
    SELECT contract_number
    INTO l_contract_number
    FROM (SELECT DISTINCT okhb.sts_code, okhb.date_terminated,
    okhb.contract_number,
    oklb_ib.attribute15 unit, okhb.start_date,
    okhb.end_date, okhb.creation_date
    FROM apps.okc_k_headers_b okhb,
    apps.okc_k_lines_b oklb_ib --,
    WHERE okhb.ID = oklb_ib.dnz_chr_id
    AND lse_id = 9
    AND oklb_ib.attribute15 = p_unit_num
    ORDER BY okhb.start_date DESC,
    okhb.creation_date DESC)
    --ORDER BY okhb.start_date DESC)
    WHERE ROWNUM = 1;
    SELECT date_terminated
    INTO l_max_term_date
    FROM (SELECT oklb.dnz_chr_id, oklb.ID, oklb.date_terminated,
    oklb.sts_code, mic.category_concat_segs,
    mic.category_set_name
    FROM apps.okc_k_headers_b okhb,
    apps.okc_k_lines_b oklb,
    apps.okc_k_items oki,
    --apps.mtl_system_items_b msib,
    mtl_item_categories_v mic
    WHERE oklb.dnz_chr_id = okhb.ID
    AND okhb.contract_number = l_contract_number
    AND oklb.lse_id = 1
    AND oki.cle_id = oklb.ID
    -- AND msib.inventory_item_id = oki.object1_id1
    -- AND msib.organization_id = oki.object1_id2
    --AND segment1 = 'OKS-RNTL-MAINT-WH'
    --AND oklb.sts_code = 'TERMINATED'
    AND oklb.date_terminated IS NOT NULL
    AND mic.inventory_item_id = oki.object1_id1
    --msib.inventory_item_id
    AND mic.organization_id = oki.object1_id2
    --msib.organization_id
    AND mic.category_set_name = 'Product'
    AND mic.category_concat_segs = 'OKS-Base'
    ORDER BY oklb.date_terminated DESC)
    WHERE ROWNUM = 1;
    END IF;
    RETURN l_max_term_date;
    EXCEPTION
    WHEN NO_DATA_FOUND
    THEN
    RETURN NULL;
    WHEN OTHERS
    THEN
    RETURN NULL;
    END;
    END;
    Regards,
    Shruti

  • PR eliminated not return budget for WBS

    Hello Guys.
    PR even with "deleted" status not return budget for WBS.
    In tcode CJ20N the Purchase Requisition has been marked for deletion. The committed amount of the budget not returned to WBS element.
    The personnel has some way to find out where did the budgeted value of this eliminated PR?
    Have performed CJEN and nothing happened.
    Please I need a help in this matter.
    Thank you very much
    Vitti

    Please check the below specified link, which is very much similar to u r requirement
    http://help.sap.com/saphelp_46C/helpdata/EN/fd/45add69d6411d189b60000e829fbbd/frameset.htm
    Regards
    Suresh

  • CQWP does not return result for a specific query when filtering on a managed metadata field.

    Hi,
    We are facing a serious production issue. We've search the web extensively but to no avail.
    Problem:
    CQWP does not return result for a specific query when filtering on a managed metadata field.
    ULS log:
    The Uls logs provides 3 different messages that I could relate to every time the query is executed. The last item(level Medium) is displayed 14 times. For readability I've moved the ULS logs to the bottom of this question.
    Query:
    The query is as follows:
    (I've translated this from dutch so pardon any typo's)
    Query: (top selection) Display items from all sites in the site collection
    ListType: Documentlibrary
    Contenttype:
    Items from this group:Custom Document Contenttypes
    Items from this content type: Verklaring
    Filter: Soort is equal to X
    extra info: the field soort (Type) is a managed metadata field that was assigned the value X
    Managed Metadata Structure:
    -managed metadata service
      -Contoso
        -Enterprise Taxonomy (term set)
          -Document (term)
            -Verklaring (term)
              -Soort (term)
                -x (term)
    EXTRA INFO:
    When I modify the filter to filter on Title the CQWP DOES return the correct document!
    When I modify the query settings to search a specific library the CWQP also does return the correct document! (In this case I am filtering on a managed metadata field).
    QUESTION:
    Why doesn't the CQWP return the document when filtering on a managed metadata field over the entire site collection.
    Why does the CQWP return the document when filtering on a managed metadata field over a single library.
    (The type of information the CQWP should return (Soort:x) is stored in a dozen document libraries!)
    Here are the ULS logs.
    Product: Web Content Management
    Category Publishing
    Level: Monitorable:
    CrossListQueryCache::GetSiteData() caught exception (Microsoft.SharePoint.SPException: Kan deze actie niet voltooien.  Probeer het opnieuw. ---> System.Runtime.InteropServices.COMException (0x80004005): Kan deze actie niet voltooien.  Probeer
    het opnieuw.     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)    
    bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     --- Einde van intern uitzonderingsstackpad
    ---     bij Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery,
    ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery
    siteDataQuery, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)    
    bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)) for query:  '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}"
    Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}" Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True"
    Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True" Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef
    ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}"
    Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}" Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True"
    Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True" Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef
    ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}"
    Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef
    Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef
    Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
    LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True"
    Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' at url: /. Titel webonderdeel: Inhoudsquery
    Product: Web Content Management
    Category Publishing
    Level: Warning
    Error occured while processing a Content Query Web Part. Performing the following query '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}"
    Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True" Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True"
    Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef
    ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}" Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}"
    Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True" Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True"
    Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef
    ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}" Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
    Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists
    ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value
    Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef
    ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' generated the following error: Kan deze actie niet voltooien.  Probeer het opnieuw.
    at the following url: /. Titel webonderdeel: Inhoudsquery
    Kan deze actie niet voltooien. Probeer het opnieuw. This is Dutch. It means something like: Cannot complete this action. Please try again.
    Product: Web Content Management
    Category Publishing
    Level: Medium (this message is displayed 14 times)
    ConsoleUtilies.GetContextualControlMode had no currentPage so the current SPWebPartManager mode cannot be retrieved.

    Hi,
    while digging through the logging (again) I found some extra logging regarding the same correlation id (see details below).
    We have a fairly large term store (4000+ lines).
    If somebody has a clue or tip that would greatly appreciated!
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql.  This can result in blocking in sql and excessive memory use on the front
    end.  Verify that no binary parameters are being passed as literals, and consider breaking up batches into smaller components.  If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields. 1971313a-6baa-49e9-bace-d024ce67f25c
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa43 High Slow Query Duration: 127.1515 1971313a-6baa-49e9-bace-d024ce67f25c
    03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed:    bij Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command,
    SqlQueryData monitoringData)     bij Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
    retryfordeadlock)     bij Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock)     bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String
    bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter
    pCallback, Object& pvarColumns)     bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query)     bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery siteDataQuery, Boolean
    useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea
    cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea ca, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(SPSite
    site, String webUrl, Boolean useSpQueryOnList)     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.IssueQuery()     bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.GetXPathNavigator(String
    viewPath)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect()    
    bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound()     bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()    
    bij System.Web.UI.Control.EnsureChildControls()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()    
    bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Control.PreRenderRecursiveInternal()     bij System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     bij System.Web.UI.Page.ProcessRequest()    
    bij System.Web.UI.Page.ProcessRequest(HttpContext context)     bij ASP.BLANKWEBPARTPAGE_ASPX_1653093133.ProcessRequest(HttpContext context)     bij Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext
    context)     bij System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     bij System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    
    bij System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     bij System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     bij System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
    wr, HttpContext context)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
    managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
    flags)     bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 1971313a-6baa-49e9-bace-d024ce67f25c

  • [svn:fx-trunk] 11523: Fix return values for ASyncListView/setItemAt(), removeItemAt(): return failed items if they exist.

    Revision: 11523
    Author:   [email protected]
    Date:     2009-11-06 11:58:50 -0800 (Fri, 06 Nov 2009)
    Log Message:
    Fix return values for ASyncListView/setItemAt(),removeItemAt(): return failed items if they exist.
    QE notes:
    Doc notes:
    Bugs: sdk-24078
    Reviewer: Evtim
    Tests run: AsyncListView Mustella tests pass
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/sdk-24078
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/framework/src/mx/collections/AsyncListView.as

  • NOT Getting Values for LOCATION...on MultiProvider REPORT

    HI All,
    I have a MultiProvider on 4 cubes.All these 4 cubes having object LOCATION. I can see data in all cubes for LOCATION. I am running a report on this MultiProvider.
    Problem:
    I am not getting Values for LOCATION. Why?
    What I did:
    I checked all location objects of all 4 cubes @ MultiProvider level .
    I didn't use any Infoprovider in Qry designer sections.
    Please suggest. What is the reason how to solve..
    THanks & Regards.
    Sri.
    Edited by: siri26 k on Dec 5, 2008 10:41 AM
    Edited by: siri26 k on Dec 5, 2008 10:41 AM

    hello,
    in the identification tab of the MP,make sure you have checked all four checkboxes across the 4 infoproviders.
    then in Listcube T-Code, select your MP,display the records based on selection inputs and see if location is populated.
    If the data is not coming in listcube, then it will not come in the Query too.
    Reg,
    Dhanya

  • How to Change the return value for the parameters

    Hi, Can anyone help me with my problem?
    I have a parameter called "P1_Projects" defined in the HTMLDB page, on the report region, there are 2 buttons, one is "Go" button to submit the report on the screen, so user can preview the report, then another button "Export to PDF" can be clicked to generate the report using Oracle Report Services. The "Export to PDF" button will use the same set of parameters submitted for the "Go" button.
    So, the parameter "P1_Projects" is being used by these 2 buttons. and I have to pass a "%" wild card for "All Projects". To make the "Export to PDF" button work, I have to safe encode the return value for "%" to "%25" in order to pass the URL formula, but now my "Go" button doesn't work with "%25", it only recognize the "%" wild card.
    Is there a way to conditionally change the value depends which button is clicked?
    Any hint or help is highly appreciated!
    Hong

    try creating a plsql process which sets the P1_Projects item as required.
    in the plsql you can do:
    if :REQUEST = 'GO' then
    xxx
    else
    xxxx
    end if;
    set the condition to plsql expression:
    :REQUEST in ('GO', 'EXPORT')
    NB. the request value is usually set to the button name when a page is submitted from a button

  • Could not determine value for variable 0P_FVAEX (or 0P_CTPCA)

    I get the below error while accessing a query on the planning Info Cube. I used the SAP Exit variable Most Current Data (Transactional InfoCube) (0S_RQTRA) in the query for the Characteristic - Request ID (0REQUID) to extract the data from the yellow request too.
    I do not use the below variables as in the below eror in my query at all. Please assist.
    Diagnosis
    This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
    Termination message BRAIN 632 appears:
    Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
    System Response
    1.     Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
    With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
    With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
    0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.

    Hello,
    you need to take a closer look at your query. Somewhere you used one of the 0P_* exit variables, which work only for controlling related InfoCubes. Use your own variables.
    Regards,
    Marc
    SAP NetWeaver RIG

  • ITicker getColumnValue() - Not returning Values

    Hi All,
    I'm on SAP MII 14.0 SP5 web application which is migrated from xMII 11.5.
    In xMII 11.5, the iTicker method - String getColumnValue(int nIndex, String sColumnName)'' is returning appropriate values for all the columns of record set fetched by query template.
    But in MII 14 (and MII 12.2 also), this method returns values for only 1st column which selected for display.
    For example, if my query template returning record-set with 3 columns as follows -
    Col1
    Col2
    Col3
    sam
    67
    temp-88
    daniel
    56
    temp-87
    Mike
    54
    temp-89
    Then output of <iTicker>.getColumnValue() is -
    Output
    xMII 11.5
    MII 14
    <iTickerObj>.getColumnValue(1, "Col1")
    sam
    sam
    <iTickerObj>.getColumnValue(2, "Col1")
    daniel
    daniel
    <iTickerObj>.getColumnValue(3, "Col1")
    Mike
    Mike
    <iTickerObj>.getColumnValue(1, "Col2")
    67
    <no value>
    <iTickerObj>.getColumnValue(2, "Col2")
    56
    <no value>
    <iTickerObj>.getColumnValue(3, "Col2")
    54
    <no value>
    <iTickerObj>.getColumnValue(1, "Col3")
    temp-88
    <no value>
    <iTickerObj>.getColumnValue(2, "Col3")
    temp-87
    <no value>
    <iTickerObj>.getColumnValue(3, "Col3")
    temp-89
    <no value>
    Is there any other method in MII 14 to fetch values or is there issue with iTicker method in MII 14 ?
    Appreciate your help.
    Thanks,
    Sumit

    Hi,
    Your method calls are correct. This looks to be an issue with iTicker. Please raise a support ticket with SAP for this issue.
    Regards,
    Anushree

  • Content scope document library does not return result for non farm administrator

    Hi
    I have a situation where I had to go with a unique permission applied subsite to store 1000 documents in the document library. This site has a set of 50 users. I was able to create content scope and library path for search. It returns results for me(creator/owner/administrator)
    however if I add other users as contributor or full permission, even after full crawling it does not return result for others.
    I saw some article that security broken site wont be indexed normal way and to include and I did that as well but no result for other users. I always get result.
    Please suggest if there are any specific security permissions that I need to include, so the document library target search will return result for others.
    Thanks
    Shri

    Hi Shri,
    For administrator search results, it looks like the documents could be crawled and searched.
    For other users you grant full control permission on subsite with unique permission where you store 1000 dcouments in document library, please make sure these 50 users have access permission(at least view permission) on documents from the
    library, then test again.
    Also test if users search on search center site without search scope, see if it's scope issue or search web part issue.
    If above doesn't work, please check ULS log for related useful information around the time when users search the documents, there should be more info to verify if issue is related to unique permision.
    Thanks,
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Not getting values for HR_READ_SUBTYPE while calling from Webdynpro appl

    Hello,
    When we pass infotype,begda,endda and other required parameters and run this FM in standalone we are
    getting values however when same FM is called through Webdynpro ABAP application it is not returning values.
    I tried debugging and i found out that some buffer issue is there.
    But still my problem is not sloved.
    can anyone tell me what can be the reason?
    Regards,
    Mayank

    Hi Mayank,
    Can you tell me how much entries you are getting in return when you run FM standalone.
    there may be possiblility of huge amount of data returnning.
    If u can give more details that will be great!!
    Thanks

  • Can not read values for profile option proxy_user_id in routine& Routine

    Hi all ,
    I developed a new form in oracle apps R12 and deployed in respective top ,After entering all the details when i am going to save the data i am getting the message like
    Can not read values for profile option proxy_user_id in routine& Routine and no action is taking place .
    Can some one please help me how to avoid this issue.
    Thanks in advance,
    Srinivas

    Hi Srinivas,
    Please check below Metalink notes. Although it is not same as your issue but it will give you way to enable 'VISIBLE' flag(if not done already)
    _'Cannot Read Value For Profile Option Proxy_user_id' Error While Trying To Create an AR Invoice [ID 1280915.1_
    Thanks,
    JD                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Not seeing values for the Nav att values in cubes

    Hi Guys
    I hv included an IO cube and that has a NAV attrbute (IO_MAT).. This cube is included inthe MP1. When i see the data in List cube .. i am not able to see the value of that Navigatinal attribute in the list cube. but im able to see the values of the IO object ....
    When we do report on this im not getting values for this nav att in the report.
    I hv select Nav attribute check mark in Cube for this object.
    kindly suggest me ...
    Regards
    AK

    Hi,
    your Multiprovider MP1 may include Cubes C1 and C2.Lets assume your navigational attribute is in C1. When you display MP1 in Listcube, it will display all records from C1 and C2.
    Note that you wont be able to see your Nav Attr. for records coming from C2 because it exits only in C1. To distinguish this, select field 'Infoprovider' in Listcube and restict it to C1 then you shud be able to NAV ATTR.
    Please assign points if useful.
    Cheers
    SB

Maybe you are looking for