Bulk material issue to cost centre by KANBAN

I have a problem for bulk item issues to cost center.
I have a material defined as bulk item and given cost center and storage type in the control cycle.
I'm using 'Stock transfer strategy' in which control type is "Transfer requirements from a storage location controlled by WM".
When I used to scan there is no MM movement and the stock from MMBE screen is not transfering into cost center.
Thanks for your early reply.
Kind Regards
Mayur Kshirsagar

Hi Mayur
I have done some further work on this - and after digging myself into a hole, I think I have found some further details.
A better setting for the Customisation is 'Direct transfer posting'.
The option of using a reservation cretaes a reservation which then needs confirming and so adds transactions to the process which add no value in a WM environment (at least for this transaction).
When set as 'Post withdrawl to cost center', on setting the kanban to empty, the set of 3 movements, 311 out, 311 in, 201 out are posted. A TR is created to understand where the stock from the WM controlled storage location 'was' taken. This then becomes the TO to support the physical movement of the stock
My preferred option would be 'Procurement for cost center' however in this case I am only seeing the 311 movements. When the TO is confirmed and the kanban goes to full, the 201 movement (which I expect from the documentaion) does not occur. I'm not sure if I'm missing something here - any ideas?
Regards
Adrian R

Similar Messages

G/L account for issue to cost centre-FERT

Hello friends,
here I have an issue,
when I am running the transaction MB1A with mvt type 201,two G/L accounts getting updated, one is inventory that is assigned in OBYC , in transaction BSX.
Another G/L account is 'for' issue to cost centre,' where it is assigned.
Can somebody give me the solution?
regards,
Seetaram Functional consultant.

Hi Friend,
You should assign it to OBYC Account Assignement. GBB - VBR (Internal Goods Issue such as Cost Center or Order). Also check OKB9. Whether cost element has been assigned to Cost Center.
I hope this found useful to you.
Regards,
Jigar

Material Issue to cost center which are not allocated to ML

Dear Experts,
We have a senario, Material issue to the cost center and through activity type the cost updated in production order, Client wants when reu CKMLCP the same should be updated in ML, and also revaluate actual activity price and updated in cost center.
Please help to solve the issue.
Thank you

Hi Nuki
I hope this material is not price control = 3/S (standard) and also the cost center is not productive type.
If you consume material with standard price to production cost center it will start a looping in activity calculation and at month end there will balance in this cost center.
Well I hope I helped you.
Regards

MB1B - Bulk material issue for sub-con PO

Hi All,
For a subcon PO, the user has by mistake done a transfer of a bulk material using MB1B. The vendor has used this material as well. Now when i receive the material from the vendor, this bulk material is not consumed by this PO with a 543 mvt, which is normal.
But the issue is, this item is now shown as lying with sub-contractor, & there is no way i can post a 543. I can post a 542 & reverse the issue, but then how do i treat this stock?
Hope my question is clear, await inputs.
Regards,
Vivek

Hi Vivek,
Thanks for your explanation.
Still I have doubts. Are you speaking of bulk material in terms of BOM?
I haven't got experience with them BUT SAP help definetly says that bulk material is not 'withdrawn specially for the order' and 'a bulk material item is only for information'.
http://help.sap.com/saphelp_46c/helpdata/en/b1/c043f4439a11d189410000e829fbbd/frameset.htm
Considering this, we cannot expect consumption by mvt 543 of bulk material when GR against subcon-PO takes place.
It's only my opinion so please think about this yourself as well.
BR
Csaba
Re: Items with Bulk Indiactor in subcontracted assembly.
http://www.sapfans.com/forums/viewtopic.php?f=9&t=289342&p=869693&hilit=bulkmaterialconsumption#p869693
http://www.sapfans.com/forums/viewtopic.php?f=6&t=310542&p=938766&hilit=bulk+material#p938766

Cost Centre Standard Report

Dear All
Is there any standard report to check the Materials procured and Material Issues to cost center.
Regards
JK

Hello
Purchase order & cost centre details can be seen form EKKN Table or you can check report ME2K
Regards
Rajesh Dalal

Cost centre wise material issued

hi
all
can you tail me trs code for cost centre wise matrial issued report
or any realted deatil report transaction code

Dear Kalyani,
Though you have marked as answered I would like to give my inputs.
Check in T Code MB51 for 201 movement,by mentioning the plant and the date ranges,Execute and if you are unable to find the
cost center in the report means,click on change variant and include the required fields.
at table level check in MSEG and for 201 movement type.
Regards
Mangalraj.S

Issue of material to Cost Centre

Dear Experts,
I have a scenario where in I procure a 10 qtys of gascylinder against My cost centre say COS101 of Mechanical Dept.
I Received a gascylinder of 10qtys now. But now i will consume only 2nos of gascylinder & rest i will keep 8 in mystore.
Again other dept called Safety Eng of Cost centre say COS202 will take 2 nos of gascylinder from stores & consumed. Now in system I would like to have track that how many i consumed actually & how many others have taken from my store.
Since this is not a stock item. As i procured agisnt my centre by wrting a short text.
Please help me how to handle this scenario.
Regards
TG

Hi ,
Once you have receive the material against cost center at the time of 101 system treats the same as consumption and thus you dont have a track over your inventory as desired by you .
There are Few things to it :
1. do you want to treat the same as a part of the inventory ? check the same with the inventory as once you start treating it as an inventory the stock lying in your stores would be treated as inventory in the balance sheet . so discuss the same with your FI counterpart if they agree to it .
2. Secondly if other cost center are consuming the material then in that case the cost should flow to that respective cost center for that you can repost the line items in CO with respect to cost center to cost center posting .
3. In case if your FI counter part doesnt agree to treating it as inventory material then you will have to keep a manual record as i guess you wont be doing any movement type posting at the time it is consumed from stores ? or do you do any posting ?.
concentrate on the following points and do revert back in case you are still stuck up .
Regards ,
Dewang T.

Notification Required if goods issue aganist the cost centre

Issue/Concern:-
          To reserve stock for a cost center & don't allow issue to another cost centre or notification should be sent to the user.
Description:-
Stock is reserved by creating reservation by MB21 for one cost centre e.g.1151-Production. We want to restrict this stock for the same Costcentre only.But when tried to issue stock to another cost center 11512-Maintanance,
              System should allow for goods issue of this stock to another cost center other than Prouction but notification sent to the Prouction CostCentre user who has done the reservation while issuing.
Kindly let me know if you require more clarifications on this.

Yes Exactly,
                  UserA     -
Reservation 0001--Req Date 03-04-2010Material M-Cost Centre Production
Now the     User B    -
Reservation 0002--Req Date 01-04-2010Material M-Cost Centre Maintanence
Then User A has to get an email alert notification while Material M issuing to the User B.

Material Documents did not capture cost centre

Hi,
There are some PGI / Material documents did not capture cost center.These vehicles are missing cost center in the PGI/Material document and i am unable to figure out why is it happening.
Can u please help me understand why the cost centre is missing ?
Would you clarify that issue.
Thanks and best regards,
pragya

if your material GL account (P&L) account are created as cost elements, you cannot post any document with out cost object. If you GR is through production order, need not assign any cost center, as production order itself is cost object. For other cost elements you can assign cost center in OKB9.
regs,
ramesh b

Issuing goods to particular cost centres.

Hi Frnds,
We have bought some stationary items and stock lies in our Raw Material Stores. Now i have to issue these items to paritcular department like hrd , accounts... ( that is to particular cost centre ).
How to issue the goods to the particular cost centre ,and what is the moment type for that ??
And what is the Tcode to raise a purchase requistion from a particular cost centre for these type of stationary items.
regards
rajesh

HI,
To issue material to a cost center we go in for MIGO and GI which is 201 Mvt Type. here while doing a GI we give the cost center and the GL account.
To raise a PR then we use ME51N and thn we select K has consumables which means material for direct consumption. While creating PR itself the system will ask you for cost center and the GL account.
In PO also we use K - consumables. then we after creating a PO then this PO is used to make the GR. while doing the GR itself the Materials is sent to the resecptive Cost centers.
Thanks & Regards,
Kiran

Goods Receipt of BOM material- cost centre required for components

I have created a subcontracting PO with a BOM material.
When trying to post a Goods Receipt the components of the BOM material are required to have a cost centre assigned to them.
The profit centre for the BOM material and components are the same. The BOM material does not require a cost centre to be entered in the Goods Receipt as the Profit Centre is allocated to account assignment tab.
Why does the profit centre assigned to the components not default in the account assignment, why is the system asking for a cost centre?

I receive this error when trying to post the material document:Field Cost Ctr is a required field for G/L account 1000 7023000200
Message no. F5808
Diagnosis
The value for field "Cost Ctr" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "7023000200" in company code "1000" linked to the field selection for posting key "81".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Cost Ctr". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.

Cost Centre Derivation Issue at the time of PGI

Dear Experts,
At the time of Posting Post Goods Issue, SD Consultant is facing error that GL Account 6* requires assignment to a CO Object.
According to my understanding, system should derive Cost Centre at the time of P.G.I through following logic :
I have assigned Profit Centre : 999999 to the Cost Centre : ABCD and the said profit centre is being used at the time of Sales Order Posting. While doing PGI, system should derive cost centre data from Profit Centre Data which is used in Sales Order but currently system is not behaving like this.
Another way is to assign respective cost centres against COGS Gls through T-Code : OKB9 which is not right I think. Because how can we map Cost Centre Data with Profit Centre Data in order to get Profit Centre Wise Profitability Reports?
Please guide me any solution.
Regards,
Sapna

Hi Sapna,
For most cases, your COGS account should not be a cost element.
Secondly, if you want to make it a cost element, you will have to maintain OKB9 for it, either on the basis of profit center or plant.
System cannot pick cost center based on the cost center master data because there may be many cose centers assigned under the same profit center. There is no one-to-one mapping of cost center to profit center.
I would suggest you do not make COGS as cost element unless the sale order is an MTO sales order or business insists on it.
If business insists on it, then add the cost element to OKB9.
BR
Abhi

Cost Centre assignmement in Material Price variance Posting

Hi Friends,
I see that when the user does a material price chnage posting thru MR21, it correctly hits the GL account as per the account determantion Procedure UMB (Gain or loss from revaluation).
I am qquite clueless from where does it pick up the cost centre to be assigned. This account (Cost element) has not been defaulted to any cost centre.
Please suggest me where I am lacking.
Thank you.
VK

Thanks all.

Reserve stock for a cost center & don't allow issue to another cost centre?

Dear Experts,
How to reserve stock for a cost center & don't allow issue to another cost centre?
Stock is reserved by creating reservation by MB21 for one cost centre e.g.CC1.
We want to restrict this stock for the same cost center CC1 only.
But when tried to issue stock to another cost center CC2, system allowed to post goods issue document.
System should not allow for goods issue of this stock to another cost center other than CC1.
How to make it.......please suggest.

I have checked
SPRO MM -- Inventory Management and Physical Inventory -- Reservation -- Maintain Copy Rules for Reference Documents
This is for reference document data copying.
Do you mean to say SPRO MM -- Inventory Management and Physical Inventory -- Reservation -- Set Dynamic Availability Check
Here for mvmt type 201 - valuation update - qty update - no special stock - Goods mvmt w/o reference - A (Dynamic Avl. chk) is the setting.
But system is not issuing the any message while issuing reserved stock to another cost center.
Please suggest...

Cost centre issue

Hi Experts,
Earlier in our company,there are three cost centre under three work centres.Now as per user's requirement we have created six work centres and cost centre is same ( three cost centre as
defined earlier).
Pl advice on by keeping same Cost Center is we will able to keep separate Labor
cost separate as per new Work Center's Created?
Regards,
Samar

Hi
Cost center is the cost carrier.
As the cost calculation is based on the work center details.
The activities performed at or by the work center are valuated by charge rates, which are determined by cost centers and activity types. Work centers can be:
- Machines
- People
- Production lines
- Groups of craftsmen
As one Cost Center may deal with different Machines - that means different work centers having the same cost center.
The only reason having one to one relation is only for the convience.
VVR

Bulk material issue to cost centre by KANBAN

Similar Messages

Maybe you are looking for