Bulk User creation Exchange Online Protection standalone

Hi,
We have on premise Exchange 2013 servers and we're planned to go for EOP only for SPAM filtering. I have couple of questions with EOP:
When we create bulk user accounts from a CSV file do we need to Allow users to sign in to EOP?
what will be the EOP address for On-Premise send connector(send emails from the organization)? and how to get it?
is there any proper step by step guide to setup EOP standalone?
Thanks..
Roshan

You don't need to allow sign in today, but in the
future there will be a personal
quarantine for users.
set the value to the MX record given to you during EOP setup, such as <your organization>-com.mail.protection.outlook.com.
(http://community.office365.com/en-us/wikis/exchange/4238.aspx)
http://technet.microsoft.com/en-us/library/jj723153(v=exchg.150).aspx
Mike Crowley | MVP
My Blog --
Planet Technologies

Similar Messages

Exchange Online Protection (standalone) permissions are not working as expected

Exchange Online Protection (standalone) permissions are not working as expected.
we provided access to Hygiene Management to some members and they not able to access EOP site.
This is standalone EOP.
ksrugi

Hi,
what roles did you have assigned to them and what error message do you get?
Greetings
Christian
Christian Groebner MVP Forefront

Exchange Online Protection Standalone for Exchange 2013 On-premise

hello:
I'm about to deploy Exchange server 2013 on-premise for my company and we are going to subscribe EOP standalone. After reading the description from technet
http://technet.microsoft.com/en-us/library/jj723119(v=exchg.150).aspx , I'm confuse about how am I going to manage user.
1. Do I need to have ADFS,DirSync server ready on my local datacenter to synchronize user with EOP?
2. I just need basic spam filtering feature, will EOP work with Exchange 2013 on-premise without having ADFS & DirSync?
Thanks.

If your deployment is not hybrid then you won;t need Dirsync.
http://technet.microsoft.com/en-us/library/jj723153(v=exchg.150).aspx

Exchange Online Protection (EOP) instead of EDGE server ?

Hi, we have Exchange 2010 with HUB server in LAN and EDGE in DMZ. There is an EDGE subscription on HUB and we use EDGE Sync.
We have Forefront Protection 2010 for Exchange (FPE) installed on EDGE. Our license for FPE is coming to end and because FPE is discontinued we want to replace FPE by EOP as SPAM filter and AV for our on-premises Exchange 2010.
What is the best practise in my scenario?
Should I omit EDGE 2010 server and create send and receive connectors on HUB server for direct connection to EOP? Is EOP replaces the EDGE 2010?
or
Uninstall FPE on EDGE 2010 server and create on it send and receive connectors for direct connection to EOP?

Hi,
We can run the Windows Azure AD Sync Tool Configuration Wizard to set up directory synchronization. It would
synchronize user accounts in an on-premises Active Directory environment to Windows Azure Active Directory (AD), where a copy of those accounts are stored in the cloud.
Then we need to set up an Outbound connector and an Inbound connector to enable mail flow between Microsoft Exchange Online Protection (EOP) and your on-premises mail servers. Here are some references about
directory synchronization and mail flow processing through Exchange Online Protection below:
Best Practices for Configuring EOP
http://technet.microsoft.com/en-us/library/jj723164(v=exchg.150).aspx
Set Up Mail Flow Through Exchange Online Protection
http://technet.microsoft.com/en-us/library/jj723133(v=exchg.150).aspx
EOP Features
http://technet.microsoft.com/en-us/library/dn305011(v=exchg.150).aspx
Thanks,
Winnie Liang
TechNet Community Support

Exchange Online Protection and Public Folders

Hi,
We have just been migrated to Exchange Online Protection from FOPE and although users can now manage their own quarantines, they cannot do this for Mail Enabled Public Folders. Is this possible?
Many Thanks

Hi Paul,
I replied to a post from you in another thread. It's easy to miss though, so here's what I said:
"You should tell mail2web that there is an option in Exchange to hide public folders from IMAP clients. I'm an IT manager at a large software company with 50% of our users on Macs. We turned on the option to hide public folders from IMAP clients a while ago, long before the iPhone. It's worked very well and continues to work for iPhone people (like me!).
There was no reason for us to make public folders viewable via IMAP, so hopefully the same will be true for mail2web."
I'm actually really glad that Apple made this change. I want to see most of the folders at the inbox level in Exchange and with the Exchange switch turned on to hide public folders, there's no downside.
Regards,
fh

Cannot load Exchange Online Protection commands in Remote PowerShell

My colleagues and I cannot load the Exchange Online Protection commands in Remote PowerShell.
It just loads the Exchange Online cmdlets.
Where are we going wrong?
PS C:\Users\jmorrison> $UserCredential = Get-Credential
cmdlet Get-Credential at command pipeline position 1
Supply values for the following parameters:
PS C:\Users\jmorrison> $Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.protection.outlook.com/powershell-liveid/
-Credential $UserCredential -Authentication Basic -AllowRedirection
WARNING: Your connection has been redirected to the following URI: "https://outlook.office
365.com/powershell-liveid?PSVersion=4.0&realm={I've removed my domain name for security reasons}.co.uk "
PS C:\Users\jmorrison> Import-PSSession $Session
ModuleType Version
Name
ExportedCommands
Script
1.0        tmp_4fnmyflw.she
{Add-AvailabilityAddressSpac...
PS C:\Users\jmorrison> Get-TransportRule
Get-TransportRule : The term 'Get-TransportRule' is not recognized as the name of a
cmdlet, function, script file, or operable program. Check the spelling of the name, or
if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Get-TransportRule
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo
: ObjectNotFound: (Get-TransportRule:String) [], CommandNotF
oundException
+ FullyQualifiedErrorId : CommandNotFoundException

I've moved MX records to EOP and seems to be fine all domain expect few.<o:p></o:p>
I can see that problematic domain has "-" between domain names.<o:p></o:p>
mydomain.com<o:p></o:p>
mydomain-com.mail.protection.outlook.com --> has no problem, however<o:p></o:p>
mydomain.usa.com<o:p></o:p>
mydomain-usa-com.mail.protection.outlook.com having issue <o:p></o:p>
when i checked in mx lookup it says MX record has NO A Record.<o:p></o:p>
any suggestions<o:p></o:p>

Configure send connector for exchange online protection

Hello Forum members,
I am trying to configure send and receive connectors for Exchange 2010 to route
on-premises mailboxes to Exchange OnLine Protection. The "help" info MS provides
is for Ex 2013 - and the EAC GUI and config does not lend a close fit to using the 2010
Exch Management Console. How can I configure connectors to properly connect to the Exchange Online Protection?
I have seen where the ip addresses are posted, etc. I am unclear how to configure the properties on the SBS 2011/EX 2010 server.
Any tips will help,
Thanks,
Eric H.
Network and Server Installs

Hello Wesleyhe,
You cannot use AD anything with EOP - if you mean exchange on-line protection.
you have to set a smart host on the SBS server to connect to EOP, you may need to add the EOP server ips to your network config
on the SBS server. the smart host line (for the send connector on SBS server) is something like: yourdomainname-com.mail.protection.outlook.com.
Then you need to configure the outside ip for your SBS server access in the EOP admin area.
Hope this helps.
eholz
Network and Server Installs

Can Exchange Online Protection work with Exchange 2010 on-premise

I want to keep my current Exchange 2010 server but switch to Exchange Online Protection for anti-spam.
Is that possible?
Without doing any AD/Azure sync?

Yes to both. With directory synchronization you can have the added benefit of blocking mail to nonexistent recipients.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Forefront to Exchange Online Protection - Notification Issue

So I guess we converted awhile back to EOP, but I wasn't with the organization. The problem I have is, when I remove the sync tool off our server, I keep getting notifications that things arnt in sync etc. Clearly they are because we are using
the Azure tool now.
I found our group email below in the old system (forefront admin center) but I can't edit it or remove it. Any ideas on how to stop these emails!? Thank you!'

So I guess since I started this thread I will respond to it to help everyone else out. I hadn't gotten a response in a week so decided to take matters into my own hands.
We were migrated over to Exchange Online Protection like I'm assuming you others have. What I ended up doing was logging into the EOP portal and going to service requests or support or whatever on the left hand side. I put in a ticket to Microsoft.
They ended up escalating it to the FOPE team who then reached out to me via email and asked a few other questions to confirm what I was doing.
They ended up taking care of it for me and we havn't gotten any notifications since.
Hope this helps!! Let me know if you have further questions.

Exchange Online Protection

Hello!
I'm trying to configure hybrid deployment of Exchange 2010 and office 365 according to the article on MSExchange.org. I'm stuck with part three (http://www.msexchange.org/articles-tutorials/office-365/exchange-online/using-hybrid-configuration-wizard-exchange-2010-service-pack-2-part3.html).
I don't know the IP address of the Exchange Onlinbe Protection server.
I've bought exchange Online Plan1, so I suppose we can use Online Protection.
Where can I found the particular IP addres of Exchange Online Protection Services?
Thank you in advance,
Moiseev Anton.

I've found the answer: http://technet.microsoft.com/en-us/library/hh510075.aspx
According to the information that I received from MS HelpDesk you can use any addres from those ranges. I personally didn't test it yet, because I stuck with the public certificate request.

Retrieval of all users in Exchange online

Exchange Version: Exchange Online at Office 365
API Name: EWS API 2.0
IDE: Visual basic C# 2010
Targeted features: Impersonation and retrieval of all users
Hi there, I am currently developing a program that uses impersonation and queries the EWS API to retrieve emails and their attachments from users. I have used the C# codes from the MSDN Library to develop the program. The program is successful in retrieving
the emails from specific users that are hard coded into the program.
The code below shows the process of authenticating the admin user and the impersonation is done in the RetrieveEmailFromUser() function.
ServicePointManager.ServerCertificateValidationCallback = CertificateValidationCallBack;
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2013_SP1);
service.Credentials = new NetworkCredential("adminemail@", "password", "domain.onmicrosoft.com");
service.AutodiscoverUrl("adminemail", RedirectionUrlValidationCallback);
List<string> emailaddrlist = new List<string>();
emailaddrlist.Add("[email protected]");
emailaddrlist.Add("[email protected]");
foreach (string item in emailaddrlist)
string content = RetrieveEmailFromUser(service, item);
Console.WriteLine(content);
        static string RetrieveEmailFromUser(ExchangeService service, string emailAddr)
            service.ImpersonatedUserId = new ImpersonatedUserId(ConnectingIdType.SmtpAddress, emailAddr);
            FindItemsResults<Item> findResults = service.FindItems(WellKnownFolderName.Inbox, new ItemView(50));
As can be seen from the coding, the users that are to be impersonated have been hardcoded. I would like to know if there are any C# codes or a link to a page where it describes how I can retrieve ALL users with mailboxes from a Microsoft 365 admin account
without needing to manually add users for retrieval.

Hi there sorry for asking again but I have successfully retrieved all the users but now I would need to filter them to lower the amount of addresses retrieved.
For example
owershell.Runspace = runspace;
//Create the command and add the parameters to retrieve all users that have mailboxes
powershell.AddCommand("Get-Mailbox");
powershell.AddParameter("RecipientTypeDetails", "UserMailbox");
//Invoke the command and store the results in a PSObject collection
Collection<PSObject> EmailList = powershell.Invoke();
//Iterate through the results and add the PrimarySMTP address for each mailbox to emailAddrlist
foreach (PSObject emailAddr in EmailList)
string time = emailAddr.Properties["WhenCreated"].Value.ToString();
string addr = emailAddr.Properties["PrimarySmtpAddress"].Value.ToString();
EmailAddrList.Add(addr + time);
The property ("WhenChanged") will retrieve the date time when the mailbox had its options MODIFIED but not when an email is received. Is there a parameter I can input using powershell to retrieve users who have new emails in their mailboxes from
a specific? Or can I change the value of the Property from ("WhenChanged") to something else that will give me a date time of the most recent addition of an email to the mailbox. This will then allow me to compare the date time to filter out
addresses which have not received any emails.
Thank you.

Bulk User creation in Essbase

Hi All
How can we create bulk users in Essbase ? say if there are 500 users need to be created at a time. what is the technique ? please get back to me ASAP
Thank You

Suppose you have 500 users in c:\user.csv, you can create batch of MaxL command using next JavaScript code. Copy the below code and name as gm.js, execute gm.js in Windows.
var fso = new ActiveXObject("Scripting.FileSystemObject");
var rs = fso.OpenTextFile("C:\ \user.csv");
var fso1 = new ActiveXObject("Scripting.FileSystemObject");
var ws = fso1.CreateTextFile("C:\ \MaxL.txt");
for(var i=1;i<=500;i++)
username = rs.ReadLine();
var x="create user " + username + "identified by " +"'password'" +" member of group " + "'testgroup'" ;
ws.WriteLine(x);
rs.Close();
ws.close();
http://hyprionexpert.blogspot.com

What is the fastest way to remove blacklisted IP from Exchange Online Protection Services?

Hello,
We have recently added new ISP and unfortunately, if we try to send an email to any customer who is using Microsoft Online Protection Services the email is bouncing back indicating that our new IP is blacklisted by Microsoft. In order to remove, we have
to send an email to
[email protected]
Is there any telephone number I can reach their support?
Thanks,

I have probably bad news, this e-mail is only valid option to delist currently without direct support contract with Microsoft (when using Office 365 or so).
Sent e-mail to this contact and also check mxtoolbox.com if your ISP is also not blocked somewhere else and why.

Bulk user creation in iLearning

Does anyone know if the bulk creation of users from a file is possible in iLearning? I've been scouring the web but can't find anything useful.
Thanks

Yes!
Oracle iLearning adheres to the IMS Enterprise User Specification for import of users and organizations. XML files that comply with this spec can be imported manually via the administrative interface or imported via our User Import Web Service API.
Please check out the Oracle iLearning Web Services documentation on metalink, note ID #295865.1
Scott

Exchange 2013 SP1 and Exchange Online Protection (EOP)

Hello, I have just set up a new install of Exchange 2013 and connected mail flow with EOP. Mail is flowing, and I can access emails through the Outlook Web App. However, I cannot get Outlook 2013 to link up to the new configuration. I got Outlook for Mac
to work, no problem. But, I get an error on outlook 2013 that says it must sync folders for a first time to open.
Any help would be appreciated.
Thanks!

Hi
Use another user to test, check whether he can use Outlook to access his mailbox or not?
If this user also cannot connect to his mailbox, I suggest you go to check whether all the Exchange services are started, make sure RPC client access service is started.
You do need to replace the self-signed certificate.
If you don't want to buy a certificate from a Third-Party Issuer, then install Windows CA and issue a certificate from there.
Even if it does work with the self-signed certificate using Outlook 2007, it is not a supported configuration and you will not be able to connect with Outlook 2010/2013.
I have seen new installation of EX13 having SSLOffloading turned on causing the problems. Turn if off if you do.
Set-OutlookAnywhere -Identity 'SERVERNAME\rpc (Default Web Site)' -SSLOffloading $false
Let us know the output of the above so that we can proceed further.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Bulk User creation Exchange Online Protection standalone

Similar Messages

Maybe you are looking for