Burning a DVD with Final Cut Pro 10 stops at 95%, why ?

Burning a DVD with Final Cut Pro X stops at 95%, why ?

Stops completely? Mine stopped at 95% for quite a few minutes then finished.  This is usually the time in the process where the lead out is being burned and it will not show progress for some time.  If it is taking more than 10 to 15 minutes from that point you may have another problem.
stephen

Similar Messages

  • Can i burn a dvd with final cut pro trial

    is it possible to burn a dvd or share a project in final cut pro trial or does it need to be purchased first?

    Yes, you can encode and burn the disk with the trial version.
    Russ
    PS: There is no difference in functionality between the trial and paid versions.

  • Trouble burning DVD in Final Cut Pro X (stops at 66%)

    I have been trying to burn a DVD on Final Cut Pro 10.1.4, but I find that it always stops the burning process at 66%.  An error does not pop up; it just simply stops at the same place every time.  I have tried burning different projects of different lengths, I have tried updating Final Cut, I've restarted the computer, and multiple other things that I've seen others have said worked for them, but every time it always stops at 66%.  I have been able to burn about 6 or 7 DVDs successfully before this problem started happening, but now I can't get a single one to work. 
    I seen where some said that this was a common problem in Final Cut when FCP X will hand the job to Create Disc to actually start the burn process, but I don't know how to fix it.
    I've tried so many different processes to make it work; could someone please help!

    Thank you for the reply!  I've been trying to burn each disk without an image for the menu, but I actually even seen where someone had said just to go into it and add a small picture for the background and then delete it and then hit share and that might get it to work. I've tried doing that multiple times, and it hasn't made a difference.  It still stops at 66%.   I didn't know if there was anything else I could try that might fix it.

  • How do i burn a dvd using final cut pro x

    how do i burn a dvd using final cut pro x?

    Use the Share button at the far right end of the Toolbar or File>Share>DVD.

  • Burning a DVD from Final Cut Pro X via Compressor - No audio?

    I have attempted to burn a DVD from a Final Cut Pro X project using Compressor, however the result was silent. 
    I used compressor because my FCPx project is in NTSC and my DVD is for air on Australian TV (PAL).
    Image seemed to burn OK however there is no audio.  Can anyone advise what I may have overlooked?
    This is the first time I have used Compressor, and I am fairly new to FCP X.
    thanks,
    Geoff

    Thanks Russ.  OK, I am now rendering again via Compressor 4, this time I have 2 files in one tab - 1) a MPEG-2 and 2) an AC3 file.  Seems to make sense.
    To burn the DVD immediately after, I added a 'Job Action' to 'Create DVD' after the render, and the dialog confuses me.  No problems with the 'Job Action' tab, but the "A/V Attributes" tab indicates the follwing:
    Type:  Final Cut Pro.app  (shouldn't this be a reference to the rendered file/s?)
    Video - showing the same dimensions of my FCPx Project file (NTSC  ..640 x 480)  instead of the MPEG-2 (Pal ...720 x 576).
    Audio - Properties show Linear PCM... 6 channels, etc... not the AC3 file.
    My question is, how do I create a DVD from the newly rendered files output from Compressor - is the Job Action the way to do it, and if so, how do I get it to reference the new files?
    Thanks,
    Geoff

  • Burning a DVD from Final Cut Pro X for DVD player

    I created my video in Final Cut Pro X 10.1. I then exported it by "Share" to "DVD" and burned it to a Sony VDV+R disc. I needed 6 copies. Some worked when I put it in the DVD player to show on our TV and others said "Can't read disc" even though I followed the same process. What am I doing wrong and how can I export a video to a DVD to show on TV via a projector or DVD player. I am on a MAC OS X (10.9.2)

    Ditto to Gary's comment.
    Al

  • Creating Blu-Ray DVD with Final Cut Pro and Adobe Encore

    Hi all,
    I am one of many with troubles creating a blu-ray DVD using Mac software. Sounds like the best way to do this is to do all of the editing in Final cut and create the DVD in Adobe Encore. Is there a way to export to Adobe Encore or should I just create a .mov file and import that to Encore. That way I think I lose the HD quality. I read that I could compress to Blu-ray format in Compressor, but I can only find HD DVD which is different. When I select create a Blu-Ray disc, Compressor won't simply create the file on my computer...it wants the disc to create.
    Maybe I am a little to new at this to fully understand, but why in the heck doesn't Apple get with the times and create a DVD authoring program that makes Blu-Ray?
    Thanks for any help you can offer.

    I have just completed my first blu-ray disc using FCP7 and Adobe encore. My workflow, once the timeline was complete, was to go to File>share>choose blu-ray as destination >export. The default encoding is H.264 along with an ac3 file for audio. It took 3 hours and 35 minutes to encode the 1hr 26 minute file.
    Opening encore, confirming you settings for HD, and choosing file>import>as asset each of the files (separately, of course). Encore imports them, then under Timeline>create new, then drag the files to the timeline. CLick on the build button and you are there. I did not mention that my original render was Prores422, but that should not matter here. No trouble with burning the Verbatim 25Gb disc.
    Encore will recognize that these files do not need re-encoding and burn the disc. It took 1 hour and 40 minutes to burn a 1 hour and 26 minute (17+ Gb) movie on an i7 iMac with an OWC 12x BD burner.
    Hope that helps

  • URGENT HELP, How do you burn a DVD from Final Cut Pro

    This is my first video and I have to have it done by Wednesday, but I dont know how to take the movie from final cut and import to DVD Studio Pro. If anyone can help please let me know as soon as you can. Thanks Zack

    Hi Zack
    There are several ways to do it. To keep it simple just export a self contained movie out of FCP then import this into DVDSP. It will do all the encoding in the background for you. The prefered way is to export out of your timeline to Compressor and use one of the DVD-mpeg-2 presets. The preset you use depends on the the length of your project, the quality of the video, etc. Once you get to understand mpegging a bit more you can create your own settings to suit yourself. If you have to be done by tomorrow just keep it simple and get it done - then you can play another day : )
    Good luck
    B

  • Burning a DVD from Final Cut Pro?

    Can anyone tell me how to import a Final cut movie into iDVD so I can burn a DVD. When I try it say's the files not compatible. I have to have this done by Wednesday, so I would greatly appreciate it. Thanks

    Hi Zachary,
    I have FCE, but my directions say:
    "To export a QuickTime movie for use in iDVD:
    1. Select a clip of sequence in the Browser or open a sequence in the Timeline.
    2. Make sure to clear all In and Out points in the Timeline by Control-clicking in the Timeline, then choosing Clear In and Out.
    3. Choose File>Export>QuickTime Movie."
    After you do this, save the QT movie. Close FC. Launch iDVD, Navigate to the Media tab, select Movies, find you FC QT movie and drag it into your DVD menu screen.
    Hope this is of help.

  • Burn a DVD in Final Cut Pro 5.

    I was wondering if anyone knows if it is possible to burn a dvd right out of FCP 5 or do I have to use DVD Studio Pro/other program?

    I was wondering if anyone knows if it is possible to burn a dvd right out of FCP 5<<</div>
    Sure you can. Connect a DVD recorder via Firewire** to your Mac. Set the input of the DVD recorder to Firewire (aka DV, iLink, IEEE1394). Insert a blank disc, hit record and play back from FCP's Timeline or do a Print-to-Video.
    -DH
    ** if your DVD recorder doesn't have a Firewire input, you'll need to connect a qualified DV device (camcorder, VTR or converter) via Firewire to your Mac then connect the DV device's analog outputs to the DVD recorder's analog inputs.

  • Can you burn multible movies on one bluray dvd disc with final cut pro

    how to burn two completed quick time movies to blu ray dvd with final cut pro? Ive tried but wont play

    Mark,
    Welcome to the wild and wacky world of DVD's and Mpeg2!
    Here are a few things that might help.
    it seems to want everything as a QT. This presents size limitations.
    Not really, iDVD simply takes the QT files that you feed it and uses its own compressor to encode them to mpeg2 files. As long as your source material is not over 2 hours iDVD can handle it.
    I'm planning to export from fcp using Compressor in the hope of fitting everything onto one disc
    You can do this, but you might find it simpler to simply export a QT reference movie from FCP and drag that into DVDSP. DVDSP will then use compressor to create the mpeg2 files that you need. I say this because some find compressor a little intimidating at first. (I know that I still do.)
    Now, go find the manuals that came with your software and start reading, DVDSP is a powerful program and the manuals are the best place to start.
    Good luck!
    K

  • Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

    Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

    As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

  • What is the best dvd burning program with a nice menu like idvd that works with Final cut pro

    What is the best dvd burning program with a nice menu like idvd that works with Final cut pro, I am wanting to burn mainly wedding dvds but also sports and other things we used to use idvd but then upgraded our computers and now we dont have it. idvd was the only thing i could find that worked.
    Thanks

    There is no real substitute for iDVD.
    Why is there no iDVD on my new Mac? How do I get it and how do I install it?
    https://discussions.apple.com/docs/DOC-3673
    To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

  • I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

    I am having an issue burning DVDs on Final Cut Pro X. After 15 minutes, I get a QuickTime Error:0. Anybody have a solution to this?

    I'm sure the pros will be along to ask what your settings are.  Although this may not be exactly helpful, I did find compressor to be much more robust for burning DVDs.  This could partially be because it includes a template to convert you movie into correct DVD format.  I was quite pleased with the outcome after multiple failed attempts using FCPX alone.

  • Is Final Cut Studio with Final Cut Pro 5 still relevant and usable?

    Is Final Cut Studio with Final Cut Pro 5 still relevant and usable? I bought it about four or five years ago and never started learning it, but would like to start learning editing now. Thanks.

    That is the version I have. What formats can I work with in FCP 5.1. For example, can I edit movies from my Nikon Coolpix 7900 point and shoot that is about five years old? My Panasonic DV camera that is also about five or six years old? Will I be able to burn these types of footage to disc once edited and watch them on a DVD player. Thanks for your former replies.

Maybe you are looking for

  • Print Button on Customer Fact Sheet

    Hello guys, we are using Fact Sheet in Portal out of CRM. On Top of this there has to be an iView Account-Selector (com.sap.pct.crm.fct.account.selector). In this iView is an Button Print, which makes it possible to Print Fact Sheet in IE. This butto

  • Toshiba 40E220U - Only shows in black and white

    I purchased a Toshiba 40E220U a few weeks ago and tried using it with my Xbox and it will only show in black and white.  The Xbox has all the updated cabling (red, blue, green instead of the red, white, yellow combination).  I can't seem to figure ou

  • RE: Entering transaction and clicking the short cut.

    Hi all, I am trying to go in to a transaction by entering the transaction name. In this case it is /VIRSA/ZVRAT and i am getting the error "This function is not possible". but i entered the same transaction in my Favourites and clicked on the same tr

  • Universal Auto Save possible?

    so I live in a part of the world where power/light, though exists, is infrequent and often comes with a low current or a very high current. As a result I've lost many a file and was wondering if there is a universal auto save program out there of if

  • Installation issues...installation package (*.msi)

    I receive a message that states: "the feature you are trying to use is on a CD-ROM or other removable disk that is not available. Insert the 'itunes' disk and click ok" I'm allowed to 'browse' to find this 'feature' but when I do the file type its se