Burning Books iTunes for Windows (XP with SP3)
Burning books takes quite a while. As I can not burn and use my PC for other things at the same time, is it possible to stop the multiple disk burning process (at the end of one of multiple disk burns), close iTunes and then pick up the burning process where you left off.
Message was edited by: TLW12
Given how popular xp64 wasn't, the fact that Microsoft largely ignores it, and others don't support it, I think Apple will live through it. The cost to support it would probably far outweigh the revenue they would gain from it.
Similar Messages
-
Just set up iTunes for windows but when I try to sync my iPhone to it this is what it says, I have another iTunes library on my power book. It than asks if I want to erase this iPhone and sync with this iTunes library. I used the same password on this windows pc system same log on etc..I don't have anything loaded on it. All I want is for the info that's on the power book in iTunes and my iPhone to snyc/update etc on the windows pc. How do I do this? My power book is dead to the world.
Read here.
https://discussions.apple.com/message/18565125#18565125 -
Unable to Burn CDs in iTunes for Windows: (Will not fit, but it should.)
I am attempting to fix an issue with a friend's iTunes for Windows. Although previously this computer using this media was able to burn audio CDs through iTunes, recently, an error has appeared before any burn. When loading the proper amount of time to fit on a CD, iTunes claims:
"The songs in this playlist will not fit on one Audio CD"
"Do you want to create multiple Audio CDs with this playlist split across them?"
"This will require more than one CD to complete."
When running CD Diagnostics, I receive the following information:
++++++++++++++++++++++++++++++++++++++++++
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension XPS Gen 2
iTunes 7.0.0.70
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: 128MB DDR ATI Radeon 9800 Pro\128MB DDR ATI Radeon 9800 Pro
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
IDE\DiskWDCWD5000KS-00MNB0____________________07.02E07, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD-ROM_GDR8162B_______________0015___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCD-RW__CRX216E_____________________PD01___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST DVD-ROM GDR8162B, Rev 0015
Drive is empty.
E: SONY CD-RW CRX216E, Rev PD01
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
The drive CDRW speeds are: 4.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: SONY CD-RW CRX216E on CDR media at speed 0X.
++++++++++++++++++++++++++++++++++++++++++
Additionally, I copied the iTunes playlist to a new drive that was recently installed with Windows, and the same problem occurs when rebooting under that system.
Also, please note that this issue occured prior to updating to iTunes 7.
Any assistance anyone could offer would be greatly appreciated by both myself and my friend.
Thank you so much,
Keith
iTunes 7 Windows XP ProHey,
Under warranty you'd be better then to call into phone support, if something has to be done with the notebook, they'll be able to set that up with you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I worked on behalf of HP. -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
With previous editions of iTunes for Windows, I could play a CD at the same time as it was being imported. That does not seem to work anymore. Why not, and is there a way to do both with the most current version? I am running a Surface Pro 2 with Windows 8.1 and the most recent vesion of iTunes, which, in all other respects, works well. I just can't listen to an album for the 1/2 to 1 hour that it takes to import it into my library.
Two JVM's ? I thought that J2EE worked within a single JVM and run everything in containers. Can you see the two processes?
-
Device not recognized in iTunes for Windows
I wasted about 1.5 hours with Apple on this issue. It all started happening after I updated to the latest version of iTunes. I haven't been able to sync my iPhone 4 in 1 month and am freaking out about possibly losing my pictures, video, text messages and music.
Windows XP user.
Any help will be greatly appreciated.
iPhone 4, iOS 5.1.1If might be helpful if you actually told us what the problem is.
-
What's up with iTunes for Windows 7 64 bit? Makes my PC run like a 286 on Windows 3.11.
What's up with iTunes for Windows 7 64 bit? So slow and draggy. Makes my high end PC with multi-core processor and video card run like a 286. Even did this after doing a fresh install of the operating system with the latest version of iTunes.
No other software does this on my machine. There has to be some crazy issue causing this.Try this,
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
Now launch your iTunes and see if it is working now. -
Unable to install itunes for new computer with windows 8
unable to install itunes for new computer with windows 8
states this app unable to run on this PCHello jgrn76,
It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
iTunes 11.1.3 for Windows (64-bit)
http://support.apple.com/kb/DL1615
If issues persist when trying to install it, I would try running through the steps in the article named:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Otherwise, would you mind elaborating a bit on what the error message says, word for word?
Thank you for using Apple Support Communities.
Regards,
Sterling -
I cannot sync my iPhone with iTunes for Windows. Even if the computer is authorized, it keeps on displaying an error message that tells that this computer is not authorized. I already tried to do the resolutions you have given in case this situation happens.
It's an endless circle.
See if these instructions help: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases -
Using iTunes for Windows to synch my Outlook Contacts and Calendars into my iPhone 5, with the iPhone Device designated and in the Info tab, I do not have the option to "Synch Contacts with", but have an unchangeable message that it is synching with iCloud. How do I create that option to synch with Outlook?
Hi there,
I would recommend taking a look at some of the troubleshooting steps found in the article below.
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.apple.com/kb/HT1692
-Griff W. -
I just bought a newer Nano and I need to upgrade my itunes for a laptop (with Windows) that no longer has the capability to go online. Is there a way to do this?
Hi John,
Thanks for your response, but if you read my first mail, it's the original serial number that I don't have. I bought the original LR as download and have misplaced the serial number. Is there any way to find it???
Linda -
To sync contacts with my computer, I choosed "Sync Contacts with" within iTunes for Windows Outlook and Its suncking but contact is not showing in the Oulook contact.
Do changes/additions to the contacts list in Outlook appear on the iPhone?
-
my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?
It won't pass 10.3.
What does this mean?
I figured it out. Thanks!!!
What did you figure out? How about posting how you resolved it? -
had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you! -
Is there a way to burn audio to a cd using itunes for windows?
Is there a way to burn an audio cd using itunes for windows?
Make a playlist.
Click File>Burn Cd
Maybe you are looking for
-
How to create object from Table?
Hi all, Is there any command to create an object type from a table? I i want to that command to create object type from emp table insted of typing the following command: CREATE TYPE emp_t AS OBJECT (empno NUMBER(6), ename VARCHAR2(25), job VARCHAR2(1
-
Hello All, I have a ALE requirement to transfer material. This I am doing in development client i.e. same server in different clients. After this is successful I have to do it with different servers. In SALE all the settings are complete. Remote logi
-
Hiding and Protecting Fields for Input in SRM 4.0 (BSP) Shopping Cart
On the Shopping Cart transaction(s) BBPSSC01 to BBPSSC03, the HTML templates are under ITS SERVICE BBPACCOUNT, and the main HTML template is called saplbbp_pdh_acc_2000_1. We want to grey out the G/L Account field and hide the business area field.Is
-
I am not able to open my calender
Every time when I dry to open calender I receive the error message "Agenda Model" close program reason code=0
-
Before updating system I could sequence photos on iPad. After recent syncing with laptop some album photos are out of sequence and not able to be re arranged. Very frustrating as it used to be easy to just hold down photo and put it in the order I wa