Burning problem with gneux.exe

hi, this is the problem with gui can any body suggest me how to download a file with name c:\program Files \sap\frontend\sapgui\gneux.exe its very urgent pls respond immediately

Hi,
Do you have the installation CD with you ?
Regards
Sunil

Similar Messages

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Problem with explorer.exe when LR starts

When starting LR (V1.0) the task manager reports that explorer.exe is eating up about 50% of my CPU. Closing LR does not have an effect. Only a re-start clears it up. This is now the second time I have installed LR as there was a conflict the first time I upgraded from the beta 4 version. I have searched through many of the same folders that my LR library uses with Bridge and Windows explorer and there was no problem with explorer.exe. Only upon starting LR does the problem occur. Any advice much appreciated. Thank you!
Windows XP Media Center Edition SP2
Pentium 4 3.2 GHz
2 GB RAM

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/

Problem with PadExe.exe message occurs at the boot-up

On booting up, which takes anything up to 30 minutes and more, I receive a message that there is a problem with PadExe.exe
It seems that padhook.dll is the problem. Putting PadExe or PadExe.exe into the search facility on the Toshiba site reveals no answer.
Does anyone know how I can resolve this problem? The slow boot up I can live with (just don't switch off!)
Thanks for any help.
Ray

This could be an part of the Toshiba Touch and Launch software.
Toshiba Touch and Launch offers easy movement and freedom of programs navigation with TouchPad
I see only one way to solve such error messages. Try to remove this software from the OS and after clean removing and booting you should install it again.

Problem with searchsettings.exe (Mozilla Malware)?

For several days I have had a screen that comes up on boot-up that says basically there is a problem with SearchSettings.exe and it will not start. I did some research and see that it is part of an iObit toolbar system and is basically malware. I found a fix online, but it didn't work so I had to restore. I think my registry cleaner might have remove part of it but I can't find out how to get rid of this annoyance.

Hello,
Here is a guide on how to remove searchsettings.exe:
http://www.spigot.com/remove-search-settings.html
It was part of a toolbar and probably the registry cleaner deleted the uninstall files for the toolbar.

Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
to svchost.exe and therefore is protected from being manually restarted.
I noticed the following errors when this occurs:
Log Name: Application
Source: Application Error
Date: 7/23/2013 4:35:26 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.xxx.xxx.net
Description:
Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x46c
Faulting application start time: 0x01ce877f9476ac07
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
<EventRecordID>158950</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW19XM2.agency.nwie.net</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>46c</Data>
<Data>01ce877f9476ac07</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
</EventData>
</Event>
All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
about 5 months ago a similar error fired on a non-virtual machine:
Log Name: Application
Source: Application Error
Date: 2/27/2013 6:57:58 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: AAW29033
Description:
Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x6c0
Faulting application start time: 0x01ce14e1af313fd9
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
<EventRecordID>286291</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW29033</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe_gpsvc</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>6c0</Data>
<Data>01ce14e1af313fd9</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
</EventData>
</Event>
I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
the Group Policy Client service to stop?

You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
**EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

CS4 Problem with Acrobatinfo.exe

I'm having a really obnoxious problem with CS4 (as far as I can tell, every part of it, tested with InDesign, Acrobat, Illustrator and Photoshop).
Every time I open an Adobe application and every 30 second to 3 minutes thereafter, my system hangs for a few seconds, with stuttering screen updates and then the whole screen flickers with a greenish tinge and then goes back to normal.
I've managed to track down the problem to the process Acrobatinfo.exe. Once I started watching the tack manager, I noticed that, without fail, each hang and flicker was preceeded by about 15 seconds of Acrobatinfo.exe starting, sitting around and then peaking at 50% CPU (all of one core/processor I imagine). Shortly after that, the process closes and everything is good again for another few minutes.
System is Windows XP, SP3. 2GB of RAM (and this happens even if nothign else is running). All windows and video card drivers are completely up to date.
Is anyone else having this problem? Any ideas on how to solve it?
Thanks
Tom

After over 10 hours of pain, I've finally solved this problem. It was the Adobe Improvement Program.
I discovered this after noticing that none of the other accounts on this computer had the problem I was having, so after hours of painfully rebuilding my profile from scratch and testing as I went, Acrobat asked if I'd like to join the program.
The second I signed up the same flickering and hangs started up again, and as soon as I said "no !@#$@#!$ thank you" it fixed the problem.
Apparently declining to join the program just on Acrobat set a global setting, as none of the other CS4 apps exhibited any slowdowns after that.
I am livid at the time I wasted tracking down this ridiculous bug, and hopefully this provides some help to others who experience similar problems.

Execution problem with java.exe

Hi everybody. I am a student in a belgian university, and i've got a problem with the execution of my binaries in the JVM.
I'm developping my project with Eclipse. When I build the project, Eclipse launch perfectly my application with javaw.exe (I supposed it because it's written in the console when I run the project).
Thus, I wanted to try to launch my application by myself, to check if everything is right...
My project is composed like this :
- creavea/src : the sources of my project (a package called "main" , and a package "com.creavea. ..." and other .jar files like a MySQLConnector/J, edtFTPj, the JOutlookBar by lf2prod, ...
- creavea/bin : Eclipse puts the binaries there, when I run my project.
- creavea/files : Somes files like configuration files for my application, etc ...
- creavea/images : Images for my interface.
- the main class, containing the pubilc static void main method, is called CreaGesta, and is in the "main" package.
creavea is the name of my project, but i think you supposed it !
I want to run the binaries, then i do this :
- I open a ms-dos console
- I'm going in the C:\eclipse\workspace\creavea\bin folder
- I execute the command : java main.CreaGesta ...
And it doesn't work :'( ! An error appears :
Exception in thread "main" java.lang.NoClassDefFoundError : com/lf2prod/common/swing/JOutlookBar.
This class, JOutlookBar is used by my application, and the jar file containing the class is in my /bin folder. I can't understand, i'm a little bit disapointed.
It's my first big project in Java, then i don't really understand what's happening. So if someone can help me, it will be really nice for me ! Thanks a lot for your help !
J�r�me - Belgium

Thank you for your reply Atmguy ! I put in my command the classpath of the jar's who are in my /bin folder.
Like this : java -classpath edtftpj-1.4.9.jar; jdom.jar;l2fprod-common-outlookbar.jar;mysql-connector-java-3.1.8-bin.jar main.CreaGesta But now, i've got an other error message :
Exception in thread "main" java.lang.NoClassDefFoundError : main/CreaGestaOh, it changed ! but I don't understand the problem . What does it mean? "Java cannot find the class main/CreaGesta", or "An error occured in main.CreaGesta" ?
Can somebody help me to solve this new error ? Thank you !

Problem with my exe code

Hello,
I have a small problem regarding to my code. I have attached the source code. There isn't any problem with the vi code. But when I convert the vi to exe, and double click the exe file in order to open it , the program is trying to start, I mean it is acting like I clicked the run button. I said it is not a problem, because all the values (test duration, delay duration, high limit, low limit) are zero. Therefore it is attempting to run, but only very small portion of the pressure reading occurs. What do you think about the cause of this problem? Thanks for your help.
Ahmet
Attachments:
front panel1.jpg ‏47 KB
Oksijen_Atolyesi.vi ‏45 KB

Hi Ahmet,
when duration and delay are zero, the your DAQ loop will (probably) run only once, thus giving you only small amount of data...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Oksijen_Atolyesi.vi ‏35 KB

Problem with BRIGHT.EXE in QOSMIO G40

Hello and good morning,
I'm a new user here at the forum, and i hope i'm posting in the right place :).
I just bought, well in march a Qosmio G40, and i'm very pleased with it, but 3 days ago I noticed a problem with it, the program BRIGHT.EXE, which controls the brightness of the flatscreen is not working (well, it stoped working), when i press the button in the operacional front panel, or use the combination FN+F6 or F7, it doesn't work, windows says that the program BRIGHT.EXE gave an error but doesn't specify which error.
Does anyone have any idea of why it is happening and a way to solve it ?
Best,
Ricardo

Thank you guys for your answers.
I'll try first to install the Value Added Package first. Do I have to uninstall the version i have first? or can i start the instalation and it will uninstall automatically ?
And then if the re-installation won't work, i'll try to rollback my OS.
Ricardo Monteiro
BTW: as i have Vista in Portuguese (:( ) i still don't have SP1 ehehe
Message was edited by: ricardo_monteiro

Forms6i - problem with jre.exe

I have a problem with installation of Forms6i.
I have processor Celeron 1700 and Windows XP.
I have installed Forms6i, but when I try to run Oracle Net8 Easy Config
there is an error with jre.exe and program close.
I have installed Patch 10 but the error is continually present.
I don't know what I can do.
I know, that it is probably the processor's fault.
It's very important to me.
If somebody knows what to do, please mail me: [email protected]

Forms6i is not yet certified on XP. See Re: required query for this requirement
Regards
Grant Ronald
Forms Product Management

Problems with Setup.exe LMS3.2 on Window 2008 Enterprise Sp2 32 Bit

Hi,
I have problems installing LMS 3.2. I get the following error during the installation process:
I already deactivated Windows Defender and DEP. After the Error the Installation finishes successfull. You can log in with the given credentials but when you are forwarded to the portal after login the browser shows "Page not Found".
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Problem signature:
Problem Event Name:                        BEX
Application Name:                             setup.exe_InstallShield
Application Version:                           15.0.0.603
Application Timestamp:                     4a030a42
Fault Module Name:                          ErrStack.dll_unloaded
Fault Module Version:                        0.0.0.0
Fault Module Timestamp:                  4a1c4e04
Exception Offset:                                02ac26a0
Exception Code:                                  c0000005
Exception Data:                                   00000008
OS Version:                                          6.0.6002.2.2.0.274.10
Locale ID:                                             1033
Additional Information 1:                  b2be
Additional Information 2:                  82109204b3973566ace818217390e302
Additional Information 3:                  9025
Additional Information 4:                  5466bb6e3df7ad4e5cd4fca294d8db3a
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Regards
Mathias

This looks like CSCte84743.
Symptom:
Installation of CiscoWorks LAN Management Solution fails when the installer is trying to configure CiscoWorks Assistant. The error seen will be related to OpsConfUpdate.exe:
The application has failed to start because GGShared.dll was not found. Re-installing the application may fix this problem.
Conditions:
This can occur on Windows 2003 and 2008 servers. The underlying root cause is still not known.
Workaround:
Configure the following registry key value:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer\DisableRollback : DWORD : 0x00000001
Then, a clean installation of LMS should be performed. Once LMS is installed, this registry key value should be removed.
However, the problem with the page not found error could be CSCtb17186. If you try Firefox and get a redirection error, then that would confirm this bug.

Machine.config entry problems with ODAC1110510beta.exe

The ODAC1110510beta.exe adds entries under the <membership>, <profile>, and <roleManager> config sections in machine.config.
The problem is that the entries are added like this: (edited to save space)
<membership defaultProvider="AspNetSqlMembershipProvider" userIsOnlineTimeWindow="15" hashAlgorithmType="">
<providers>
<add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider... />
<clear />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider... />
</providers>
</membership>
The OracleMembershipProvider was added in front of the AspNetSqlMembershipProvider. Then a <clear/> was added afterward -- removing the OracleMembeshipProvider that was just added. Obviously, that is not very useful. The same thing occurs in the Profile and RoleManager config section.
Please modify the install to added the Oracle provider entries at the end of the prooviders list.
<membership defaultProvider="AspNetSqlMembershipProvider" userIsOnlineTimeWindow="15" hashAlgorithmType="">
<providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider... />
<add name="OracleMembershipProvider" type="Oracle.Web.Security.OracleMembershipProvider... />
</providers>
</membership>
Thanks,
Jim

Hello faustina,
According to the link below, this error may occur if there is a process that is attempting to log data to a database that does not exist or that Citadel cannot access. The root cause of this can be anything from a firewall, a corrupt process in the Distributed System Manager, or possibly the result of deleting different databases through Windows Explorer rather than using Measurement & Automation Explorer (MAX) (which doesn't seem to apply here). I've also included a customer forum below regarding this same error in which stopping all processes except for "System" and restarting the computer has solved this issue. Most likely, if you are no longer experiencing this issue and all that has changed was the installation of your software, it may have been corruption within the DSM.
http://digital.ni.com/public.nsf/allkb/27A007940341705B8625716500723B97?OpenDocument (Runtime Error With Tagsrv.exe When Shutting Down Or Turning On PC)
http://forums.ni.com/t5/LabVIEW/NI-Variable-Engine-tagsrv-exe-Runtime-Error-Dialog-Upon-Restart/m-p/... (NI Variable Engine (tagsrv.exe) Runtime Error Dialog Upon Restart -- Resolved)
Wes W
Application Engineering
National Instruments
www.ni.com/support

Burn Problem with a 4GB project: "Layer 0 Exceeds"

First off this is not the usual Dual-Layer problem. I know all about Layers how they work and how to make them. Although the error I receive deals with DL my projects or nowhere near that size.
I recently had DVDSP 4 crash on me. Ever since than its been running really funny. The biggest issue I am having is that it won't allow me to burn a DVD 5. My projects usually range from 2.5GB - 4.5GB. Let me also say that DVDSP 4's Disc meter has always been a pretty good gauge as far as I am concerned. It's always been right on telling me if something was going to fit on a DVD 5 or 9.
My problem ever since the crash is that DVDSP will not allow me to burn a DVD unless the project is under 3.5GB. I have tried everything, including a Full Re-install of DVDSP. Every time I try to burn a DVD I get the following error message:
+"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."+
My latest project is dealing with a 4.4Gb (according to Meter) 4.32GB actually. It is impossible for me to burn a DVD because of the error message above. I can however run the project out on a Single DLT. How does that work?
Has anyone else had a problem like this? Does anyone have an suggestions?
I have checked all the obvious settings in DVDSP and all seem to be right. I can't figure this one out.

I've never had a problem burning a 4.4 disc on a DVD 5 until now. I actually went back to some of my previous project that were a DVD-5 and I am unable to burn those now too. Everything really got screwed up on that last Crash.
Yes. I am using AC3 audio.
I have not yet tried burning my DVD project through another program...but thats a good idea.
I usually burn a DVD and DLT for the replicators...but I know they prefer a DLT. What I find odd about all of this is that I am able to run out a DLT with no errors at all. It only seems to be on the DVD side.
In regards to the uninstall...I used the exact program. I am actually in the process of doing a full reinstall of FCP2 Suite.
I'll let you know how it goes. Thanks for the suggestions.
Mike A.

Problem with mpseal.exe referencing an MPB file

Is the mpseal.exe that came with scom 2012 R2 (dated 9/6/2013) capable of sealing a management pack that contains references to management packs that are included as only MPB files?
I get a missing reference error when sealing a management pack referencing Microsoft.SystemCenter.Visualization.Component.Library for which I have the mpb (version 7.1.10226.1015) in the INCLUDE directory.
Here is what is reporting the error:
mpseal.exe .\managementpackname.xml /I {pathtoMPandMPBfiles} /Keyfile {pathToKeyfile}
: Verification failed with 1 errors:
Error 1:
Found error in 2|managementpackname|32.2014.1023.1045|managementpackname|| with message:
Could not load management pack [ID=Microsoft.SystemCenter.Visualization.Component.Library, KeyToken=31bf3856ad364e35, Version=7.1.10226.0]. The management pack was not found in the store.
Microsoft.EnterpriseManagement.Common.ObjectNotFoundException: An object of class ManagementPack with name Microsoft.SystemCenter.Visualization.Component.Library was not found.
   at Microsoft.EnterpriseManagement.AggregateStoreManagementPackManagement.GetManagementPack(String name, String keytoken, Version version)
   at Microsoft.EnterpriseManagement.Configuration.ManagementPackReference.GetManagementPack()
Could not load management pack [ID=Microsoft.SystemCenter.Visualization.Component.Library, KeyToken=31bf3856ad364e35, Version=7.1.10226.0]. The management pack was not found in the store.
The mpb file outputs the following:
PS S:\> Get-SCManagementPack -BundleFile S:\Microsoft.SystemCenter.Visualization.Component.Library.mpb|select *
Name                  : Microsoft.SystemCenter.Visualization.Component.Library
TimeCreated           : 1/1/0001 12:00:00 AM
LastModified          : 1/1/0001 12:00:00 AM
KeyToken              : 31bf3856ad364e35
Version               : 7.1.10226.1015
Id                    : 023b4b11-a20c-1b7f-34e1-bd49276c10b1
Identifier            : 2|Microsoft.SystemCenter.Visualization.Component.Library/31bf3856ad364e35|7.1.10226.1015|Micros
                        oft.SystemCenter.Visualization.Component.Library||
VersionId             : 83a836b1-e65b-fe42-6d1c-99bba0591e67
References            : {ManagementPack:[Name=Microsoft.SystemCenter.Visualization.ServiceLevelComponents,
                        KeyToken=31bf3856ad364e35, Version=7.1.10226.0], ManagementPack:[Name=System.Library,
                        KeyToken=31bf3856ad364e35, Version=7.5.8500.0],
                        ManagementPack:[Name=Microsoft.SystemCenter.Visualization.Library, KeyToken=31bf3856ad364e35,
                        Version=7.1.10226.0], ManagementPack:[Name=Microsoft.SystemCenter.Image.Library,
                        KeyToken=31bf3856ad364e35, Version=7.1.10226.0]...}
Sealed                : True
ContentReadable       : True
FriendlyName          : Component Library Management Pack
DisplayName           :
Description           :
DefaultLanguageCode   : ENU
ActiveLanguageCode    :
LockObject            : System.Object
Store                 : DevGroup0
SchemaVersion         : 2.0
OriginalSchemaVersion : 2.0
Registry              : Microsoft.EnterpriseManagement.Configuration.ExtensionRegistry
Extensions            : Microsoft.EnterpriseManagement.Configuration.ExtensionManagement
LifetimeManagers      : Microsoft.EnterpriseManagement.LifetimeManagerTypeRegistry
Features              : Microsoft.EnterpriseManagement.FeatureContainer
ImageReferences       : Microsoft.EnterpriseManagement.Configuration.IO.SingleManagementPackStore_ImageReferences
EntityTypes           : Microsoft.EnterpriseManagement.SingleManagementPackEntityTypeManagement
ManagementPacks       : Microsoft.EnterpriseManagement.SingleManagementPackManagement
Presentation          : Microsoft.EnterpriseManagement.SinglePresentationManagement
Monitoring            : Microsoft.EnterpriseManagement.SingleManagementPackMonitoringConfigurationManagement
DerivedTypes          : Microsoft.EnterpriseManagement.Configuration.IO.SingleManagementPackStore_DerivedTypes
The managementpackname.xml file is what I want to seal. It contains some dashboard visuals so it has references to the above management pack.   Here is a snipet of the xml file:
<?xml version="1.0" encoding="utf-8"?><ManagementPack ContentReadable="true" SchemaVersion="2.0" OriginalSchemaVersion="1.1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Manifest>
    <Identity>
      <ID>mmm.App.ADFS.Core</ID>
      <Version>32.2014.1023.1045</Version>
    </Identity>
    <Name>managementpackname</Name>
    <References>
      <Reference Alias="SystemCenter2">
        <ID>Microsoft.SystemCenter.Visualization.Component.Library</ID>
        <Version>7.1.10226.0</Version>
        <PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
      </Reference>
One way to fix this is to locate the *.mp file for this mpb and put that in my INCLUDE directory, but I cannot find that *.mp file.
Is this fixed with a new version of mpseal.exe? Worst case, I will pull out the dashboard stuff from this management pack and leave it unsealed. I use sealed management packs as a way to ensure the version from one management group to another
is the same.
Ted

Thanks for the insight here. I was able to use this, along with the following post to figure this out:
http://scsmnz.net/sealing-a-management-pack-using-fastseal-exe/
Basically, I didn't use fastseal, but I did use the article to get the new public key token from the key pair I was using and then replace the <ManagementPackPublicKeyToken> for the management pack that was being referenced in the management pack that
I was getting the error on when trying to seal it.
In a nutshell (from above article):
Extract the public key from your new snk into a second new snk:
sn -p yourkey.snk yourpublickey.snk
Get the readable public key token from the second file:
sn -tp yourpublickey.snk > yourpublickeytoken.txt
The last line of the txt file will say something like “Public key token is c2e33c3aa46ba97e”. You need this value in your Management Pack.
Note that sn.exe switches are case sensitive.
Edit the XML for the management pack you are trying to seal and replace the value between the following tags with the new public key token you found above (make sure it is the one associated with the <ManagementPackName> for the MP that is being referenced,
there might be more than one and if you edit the wrong one you'll just cause more problems):
<ManagementPackPublicKeyToken>OldTokenHere-RefencedInError</ManagementPackPublicKeyToken>
Save, and then you should be able to seal it.
Hope that helps.

Burning problem with gneux.exe

Similar Messages

Maybe you are looking for