Bursting Program errors with "Error while generating the Document"

Hello Folks
Here is my bursting control file
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:globalData location="stream">
</xapi:globalData >
<xapi:request select="/XMLEXCEL1/LIST_G_Q0">
<xapi:delivery>
<xapi:email server="mycompany.com" port="25" from="[email protected]"
reply-to ="[email protected]">
<xapi:message id="1234" to="[email protected]"
attachment="true" content-type="html/text"
subject="Employee Report for Empno"> Dear
Please review the attached document</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document key="123" output-type="XLS" delivery="1234"
output="XMLEXCEL1" >
<xapi:template type="RTF" location="xdo://AR.XMLEXCEL1.en.00/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
this is the output of bursting status report:
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT><REQUESTID>40403415</REQUESTID>
<PARENT_REQUESTID>40403339</PARENT_REQUESTID>
<REPORT_DESC>XMLEXCEL1</REPORT_DESC>
<OUTPUT_FILE>/opt/local/application/orafin/applmgr/out/outfaud/S1759.zip
</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY>123</KEY>
<OUTPUT_TYPE>XLS</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT>
</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
Can anyone help on this please.

can anyone help me?

Similar Messages

Error while generating the Document... Bursting Status Report

Hey all,
I am getting some errors in a production environment when trying to burst out some invoice data.
This process has been pretty robust and out of 1000+ invoices a day, I can only find 4 that are failing regularily.
Why am I mentioning?, just to show that I am thinking this is a data issue, but just cannot see anything that stands out.
I can take the xml output and run it through my development suite on my local machine and all runs fine.
Just when it is running live through the db is when it fails.
Here is the Bursting output that shows the error....
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT>
<REQUESTID>27044820</REQUESTID>
<PARENT_REQUESTID>27044726</PARENT_REQUESTID>
<REPORT_DESC>Invoice Print Selected Invoices</REPORT_DESC>
<OUTPUT_FILE>[$OUT_DIR]/o27044820.zip</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY></KEY>
<OUTPUT_TYPE>pdf</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT></OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
The problem is that this output doesn't necessarily help, nor can I find any hints in the OPP logs.
So... the question becomes...
Any ideas on where I can look to resolve this issue?+
Or where I can find any clues at, that would possible point at the issue?+
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
BI Publisher 5.6.3
Thanks
Hayden,

Tim,
Thanks for the suggestion, always seems to slip my mind that the Bursting Report has debug on it.
As far as what is generating the XML, it is oracle's standard, only slightly modified ... ;), invoice generating report, RAXINV_SEL.
Well RAXINV_SEL, or RAXINV_NEW, doesn't matter, same code, that is the executable.
I have turned on the debug, for both the source xml and the burst request, and unfortunately, still nothing stands out to me.
I was really expecting to see something in the burst log, pasted at the bottom...
but, it yet avoids me.
If I had to guess, I would bet the user went, in our terminology, "slashwit crazy", or example "model /w options", in some description.
But can't seem to find which field it is blowing up on, since we are catching these special characters in several places already, and slashwit is littered throughout the output.
I was also looking in the bursting control file for the special xml tags identified there, as those would require no slashes. But those are all clean.
Hayden,
XML Publisher: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 21-SEP-2009 10:43:12
XML/BI Publisher Version : 5.6.3
Request ID: 27048106
All Parameters: ReportRequestID=27044726:DebugFlag=Y
Report Req ID: 27044726
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:{node}
Preparing parameters
null output =/u007/app/applmgr/{instance}/out/{instance}/o27048106.out
inputfilename =/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Data XML File:/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Set Bursting parameters..
Temp. Directory:/u007/app/applmgr/{instance}/temp
[092109_104315337][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[092109_104315340][][STATEMENT] setOAProperties called..
Bursting propertes.....
{burstng-source=EBS, font.Free 3 of 9.normal.normal=truetype./usr/java/jre/lib/fonts/FREE3OF9.TTF, font.Times New Roman.normal.normal=truetype./usr/java/jre/lib/fonts/TIMES.TTF, system-temp-dir=/u007/app/applmgr/{instance}/temp, font.Arial.italic.normal=truetype./usr/java/jre/lib/fonts/ARIALI.TTF, user-variable:cp:parent_request_id=27044726, user-variable:cp:application_short_name=XDO, font.Courier New.normal.bold=truetype./usr/java/jre/lib/fonts/COURBD.TTF, font.Times New Roman.normal.bold=truetype./usr/java/jre/lib/fonts/TIMESBD.TTF, user-variable:cp:request_id=27048106, font.Arial.normal.normal=truetype./usr/java/jre/lib/fonts/ARIAL.TTF, font.Courier New.normal.normal=truetype./usr/java/jre/lib/fonts/COUR.TTF, user-variable.OA_MEDIA=http://diierp.corio.com:8002/OA_MEDIA, font.Courier New.italic.bold=truetype./usr/java/jre/lib/fonts/COURBI.TTF, user-variable:cp:org_id=83, user-variable:cp:DebugFlag=Y, font.Times New Roman.italic.bold=truetype./usr/java/jre/lib/fonts/TIMESBI.TTF, user-variable:cp:responsibility=51270, font.Arial.italic.bold=truetype./usr/java/jre/lib/fonts/ARIALBI.TTF, font.Courier New.italic.normal=truetype./usr/java/jre/lib/fonts/COURI.TTF, user-variable:cp:user=HAYDEN, user-variable:cp:reportdescription=Invoice Print Selected Invoices, user-variable:cp:language=en, font.Times New Roman.italic.normal=truetype./usr/java/jre/lib/fonts/TIMESI.TTF, user-variable:cp:ReportRequestID=27044726, user-variable:cp:locale=en-US, user-variable:cp:territory=US, font.Arial.normal.bold=truetype./usr/java/jre/lib/fonts/ARIALBD.TTF}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 27048106 on node {node} at 21-SEP-2009 10:43:19.
Post-processing of request 27048106 completed at 21-SEP-2009 10:43:20.
Finished executing request completion options.
Concurrent request completed
Current system time is 21-SEP-2009 10:43:20
---------------------------------------------------------------------------

Errors have occured while transferring the document into another system.

Hi GURUs,
Please help me to come out from this problem........
An error has occured in the system YDQCLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Refer to the attached log for error messages.
Transmission log
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Please suggest something ASAP....
i'll be highly Grateful to you.....
Regards,
Ankur

Hi Gangadhar,
Can you plz explain me elaborately, where should i check for partner function of the equipment and how this partner function is related to this issue.
I think partner function will be there only for BP. Can you plz clarify me.
Thanks in advance
Ankur

Bursting Program in error 'error while generating the document'

Hi All,
We have a requirement to place EXCEL output generated through BI XML report, in EBS path. ex: /usr/tmp
Parent Concurrent program is generating output file and program got completed normal and Bursting program got submitted.
But, Bursting program completing in error, saying 'Error While Generating Document'
Other programs which use Bursting are working normal and they are using same path (/usr/tmp)
Anyone faced similar issue ? Any sample bursting control file that sends .xls file will also be helpful.
Below is the bursting file that we created:
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/XXPREDICT/G_DATA_GROUP">
    <xapi:delivery/>
    <xapi:document output="/usr/tmp/XXYYZZ_${RUN_DATE}_${RUN_TIME}.xls" output-type="excel">
      <xapi:template type="xsl-fo" location="xdo://<APPLSHORTNAME>.<TEMPLATECODE>.en.US/?getSource=true" />
    </xapi:document>
</xapi:request>
</xapi:requestset>
P.S: When we give template type as 'rtf', then we are getting a different error i.e., "No such file or directory"
Regards,
Rupa

You should use:
<xapi:template type="rtf" location="CUSTOME_TOP_PATH/US/REPORT_RTF_NAME.rtf"/>
You need to check that there should rtf file present with the same name as you mentioned in above code. Also verify the port number.
Example:
<?xml version="1.0" encoding="US-ASCII"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/DEBIT_MEMO/LIST_G_1/G_1">
<xapi:delivery>
<xapi:email id="123" server="localhost" port="1028" from="[email protected]" reply-to="[email protected]">
<xapi:message id="123" to="[email protected] ${EMAIL}" attachment="true" subject="Invoices for VENDOR_NO:${SEGMENT1} and Period ${CF_4}">
Please ignore this report.It is for Testing,For INVOICES of vendor ${VENDOR_NAME} for the Period ${CF_4}</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="${SEGMENT1}||TSRL HM||${CF_4}" output-type="pdf" delivery="123">
<xapi:template type="rtf" location="/ebiz/app01/appldev/DEV/apps/apps_st/appl/xxabrl/12.0.0/reports/US/XXTSRL_DEBIT_CREDIT_MEMO_PRINT_LATEST_TSRL_HM.rtf">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
HOP! it will help you.

Error in J1INCERT while generating the tds certificate

Dear All,
when i do the J1INCERT, geting the error mesge no data selected for printing.
Please help me on this.
Best Regards,
Venkat,
9616246748.

Hi Venkat,
After making the posting of invoice or payment, did you run the following transactions before J1INCERT:
J1INCHLN & J1INBANK , if no please run these transactions.
If Yes, please check whether you have entered the following correctly :
Business Place, Section code & Section in the company details tab
Posting Date, Bank Challan Number & Bank Challan Date in the document details tab (If you select the bank challan number leaving all other fields blank then it should get populated automatically).
All details in the certificate tab.
Thank You.

Error in Process While transfering the Document

Hi,
We are on SRM 5.0 configuring Extended classic scenario. SC is approved and it has created the incomplete PO in SRM. Eventhough the vendor has been assigned while ordering the SC, it still display as blank in the PO. When I select the Vendor again in Process PO and selecting again the vendor and ordering the PO. The PO is created sucessfully in SRM, but while transfering to backend "Error in Process" is diaplayed. A dump is created in R/3 raise exception with title "PARAMETER_ERROR".
Please let me know why the vendor is not getting asigned properly while ordering the SC and also how to correct the issue.
Regards,
Chary

Hi,
Thanks for the reply.
I checked in the program : CBRC_EXIT_47_PUR , the piecf of code is :
IF ( I_UCOMM IS INITIAL ) OR
( I_METHOD IS INITIAL ).
RAISE PARAMETER_ERROR.
at this place it fails and raises the parameter error.
When we are creating the PO directly in R/3 we could break at this point and both the above aprameter contains some values and it goes well.
But we are unable to break from SRM by putting the break point. I think any one of this parameter is empty and so it goes into this block and raises this exception. Please let us know how we can break from SRM at this point, so that we can find what values are coming from SRM.
Regards,
Chary

Reduced Sized PDF - "An error was encountered while saving the document" - Adobe Acrobat 11

I have users randomly getting this error when trying to File > Save as Other > Reduced Sized PDF.
There's nothing unusual about the PDFs. They're not encrypted or secured.
I've tried creating "Preferences" and "PDF Optimizer" folders in their profile folders but that didn't fix it.
Issue is just intermittent and I'm not sure what to do to fix it.
Users are printing and using a scanner as a work-around which is not ideal.
imgur screenshot since I can't use the Insert Image feature in this thread for some reason:
http://i.imgur.com/bUnWXZj.png
Version: Adobe Acrobat 11.0.4

Hi Clitton,
There must be something about these PDF's that are not meshing with Acrobat.
This is not a specifically known issue. Would you mind sharing some specifics about your workflow? How were these PDF's originally created? What software was used?
Looking forward to hearing back from you!
Regards, Stacy

An error has occurred in the system DV1CLNT400 while copying the document

Hi All,
While creating complaint confirmation i am getting below mentioned Errors in ECC.
Can any body provide configuration settings.
An error has occurred in the system DV1CLNT400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
No operating concern has been assigned to controlling area 1001 (Notification E KE 300)
Error occurred during determination of profitability segment (Notification W IAOM 025)
Error occurred during creation of settlement rule (Notification I IAOM 046)
Regards,
Teja

Hi,
From the nature of Error messages, it looks like these are related Customization settings. As you mentioned your SAP CRM system is connected to SAP ERP system, so Controlling documents and other account postings are happening there.
So, the best approach will be to get in touch with your functional consultant who will be the best person to guide you with the scenario and the respective process setup. You can also have a look at SAP HELP about the integration of the CRM and ERP systems along with the data exchange.
Hope this will help.
Thanks,
Samantak.

Error while transferring the document

Hi Friends,
We are getting an Error when we try to create a service confirmation.The error is an 'Error has occurred while transferring the document'.When we see in the transmission log it is telling inconsistent update flags.
How can the error be removed?
Regards,
Jay.

Hi Jay,
Try doing this once again and go to Tcode SMW01 and try to locate your Bdoc. First it will be in yellow state and it will turn red (error).
Once you get the error Bdoc, check the error messages in it (there is proper button on the top to get this). You might get the cuase of the error in Bdoc messages itself.
If not, post me the Bdoc status and the Flow Context.
Regards,
Alin

An error has occurred in the system "ECC" while copying the document

Hello Experts,
When I'm creating service orders in CRM UI and saving them I'm receiving this error:
An error has occurred in the system "ECC" while copying the document
Details:
An error has occurred in the system "ECC" while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
Error occurred during determination of profitability segment (Notification E IAOM 025)
Profit center for CRM integration not found (Notification E KECRMPCA 001)
Error occurred during determination of profitability segment (Notification E IAOM 025)
Account assignment error in internal order K1153000004111 for position 2000000990/0000000020 (Notification E C( 321)
Regarding to the account assignement, we developed a field to input Accounts IDS for WBS.
This field has a customization table related which allows to visualize in a dropdown list the allowed WBS ID per user according to the entries in the table.
Also, In the Service Order there is one status that triggers an action that creates a Sales Order in CRM that is replicated in ECC, but since I have this error Sales order is not being replicated in ECC.
Any ideas?
Kindly Regards,

HI,
Please check these threads:
CRM-COPA- An error occurred in system EEPCLNTXXX during account assignment
http://www.riderspider.com/2010/11/error-error-occured-in-system-dv1cltecc.html#more
Denis.

An error has occured in the systemSENDER while copying the document-CRM-R/3

Hi Sap Gurus,
In our client (manufacturing industry) have a CRM module too which is used by endusers
In last few days, due to some problem some of the credit memo requests could not replicate into the R/3 system properly
An error has occured in the system SENDER while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
Transmission log
SALES_HEADER_IN has been processed successfully (Notification S V4 233)
The sales document is not yet complete: Edit data (Notification W V1 555)
Sales document 9400000123 was not changed (Notification E V4 219)
Transaction ZITN is not defined (Notification E V1 347)
Error in SALES_ITEM_IN 000010 (Notification E V4 248)
Transaction ZITN is not defined (Notification E V1 347)
Error in SALES_ITEM_IN 000020 (Notification E V4 248)
Point will be rewarded to Everyone for helpful solutions.
Thanks & Regards,
San Rao.

Dear All,
My problem solved
Item catergory ZTIN and MRP type PD not assigned to Schedule line category CP in ECC system.
Any how thank you very much for your partcipation .
Regards,
San Rao.

An error has occured in the system KRP810 while copying the document

Hello Experts,
In my project while saving the service confirmation transaction i am getting the below error. Below is the complete description of the error.
An error has occured in the system KRP810 while copying the document
Message no. CRM_ORDER_MISC 020
*Diagnosis*
*Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.*
*Transmission log*
*Number of hours recorded 16,04 exceeds target hours 0,00 (Notification W LR 206)*
*Updating could not be completed (Notification E S& 150)*
Could any one of you tell me , how can we remove the error and what is the reason behind this error.
Thank you in advance.
Thanks & regards,
Vamsi krishna.

need to replace confirmation

InfoSet Query: Syntax Error while generating the program.

Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.

There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

Hi all,
I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
"an error occurred while generating the report. the application will exit" and Certification tool just crushes
I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
Can't insert images into post because of not verified account so imgur:
http://imgur.com/ptT0cU3

Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
Another member has same question.
https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
If you want to test your app, you can also send to beta store and you can get response from the testers.

Error while generating the context node

Hi ,
Requirement is to add the marketing attribute field under the Account details overview Page. As the field was not available in the context node i have added a new context node in the Account details. I used the wizard and added the context node BuilmktattributeRel so as i can add "Attribute set" under the BP overview page."
Now after adding the context node and while executing i am unable to see the overview view page, i am getting an error :
1. Component GET_ATTRIBUTE does not exist
2. Determination of BOL attributes failed
Also i am unable to regenrate the GET_I_method. If i want to delete the Zcontextnode, i am unable to do so.
Kindly help me with the technical approach to add the context node in the overview page.
Thanks in advance,
Sunil

One thread would have been sufficient.
Error while generating the context node

Bursting Program errors with "Error while generating the Document"

Similar Messages

Maybe you are looking for