Business Area-Cost Center error while doing VL09 (PGI Reversal)

Hi Friends,
Kindly go through the "ERROR" message and "IMPORTANT" point as mentioned below:This is happening while reversal of PGI in VL09.
IMPORTANT: Just to make you aware, the cost center in error (CONSDSPL) was nowhere assigned in FS00 or OKB9. Also to state that at the time of this error some different cost center was assigned in FS00 which was having business area SUGR. So PGIs are picking up two business areas i.e. 1.DSPL (from Plant-Division-BussA setting) & 2. SUGR (for P&L GL from FS00)
Following error coming while doing PGI reversal:
ERROR -
> BAL1/CONSDSPL CTR belong to business area DSPL not SUGR
Message no. KI188
Diagnosis
Account assignment object BAL1/CONSDSPL, type CTR is assigned to business area DSPL. You made an explicit assignment to business area SUGR.
System Response
The posting row may contain only one business area.
Procedure
Perform one of the following actions.
Make an explicit assignment to business area DSPL. To do so you must set the "Business area" field as entry-ready in Customizing.
Enter an account assignment object assigned to business area SUGR.
Change the assignment of BAL1/CONSDSPL to business area DSPL. Note the document number and continue processing the document after changing the assignment.
PLEASE GUIDE. NEEDED ANSWER BADLY.

Business area filed in cost center CONSDSPL is DSPL (what it should be). In this scenario, they have assigned SGPRODCTN cost center in GL master wherein business area is SUGR.
That means, when accounting entry is getting generated, it will show two business areas. One will be fetched from "Plant-Division-BussA" setting (SPRO) & the other from GL. Also to make you aware that here the business area should be DSPL, but since they assigned wrong cost center in GL master, the entries are going to SUGR as well.
Most important thing to notice out here is that when this error came "no default account assignment was done through OKB9" The cost center showing in error viz. CONSDSPL was nowhere assigned. So the question is from where the system is fetching this cost center?

Similar Messages

Cost Center Error while releasing Billing document to Accounting

Hi SAP Gurus,
Our user raised an issue that when he had released billing document to accounting, the system threw error message
"Cost center xxxx (CO area)/xxxx(Cost center) does not exist on date 11/16/2011". Message No. KI 222.
But the cost center xxxx does not exist in the system at all. The user does not want to create the cost center eirther. Cost center was not entered in Sales order, Delivery and Billing. I have checked 'Default account assignement' (OKB9) settings, Default account assignment in cost element master record and assignment of cost center to sales organization (OVF3). But cost center xxxx was not configured in the above settings. I have checked validations/substitutions, user exits and BAPIs, there is nothing specific to the cost center. This is not a cross-company code scenario. I have made field status to optional for cost center. But still the problem persists. Accounting document did not get generated because of the above mentioned error message. User applied SAP notes 315350. But it did not resolve the issue.
Would anyone let me know 'why the system showed the cost center xxxx that does not exist, while releasing the billing document to accounting'?
Thanks in advance.
Best Regards,
K.S.K

Hi Friend,
I think this link help for you
Cost center XXXX does not exist on 15.09.2010.
or check the OVF3

Business Area - Cost Center - Urgent

Hi,
I have encountered a problem with business area wise document splitting. I have selected business area wise document splitting after posting values in the cost centers. now I need to assign business area in the cost center master data. Because of the cost center is having values, it is not allowing me to assign business area in the master data. Now i want assign business area in the cost center master.
And in Cost Center Master Data the Business Area Feild is mandatory field, thats why it is not allowing me to change the period and to create a new cost center with the same CC No.
Pls help me out in this regard
Thanks in Adance
Raveendra

Hi,
try to run the following ABAP: RKACOR06 It allows you to change the business area in the cost centre master.
Hope that helps, points welcome
Csaba

Error while doing VL10B(PGI)

Dear all,
I maintained the batch for the material e.g for one material three batches and i have done the 501 for the same.
and created STO for that material n also SD doc is created,while doing VL02N (outbound deliv ) when i am doing the Batch split for this material its taking hovewer when i do the Post Goods Issue (PGI) system is throwing an error msg no. <b><u>M7 018 this is an error message</u></b> asking to enter purchase order no.
any help reg this would be appreciable.
thanks and regards
Vijay

Hello Vijay,
I have the very same error. And I see from your message that you have the same one too. Please let me know as to how you were able to get over it. I am processing this delivery via Vl01n. And this is not a batch managed material.
Appreciate your help and time.
Thanks

Error while doing miro of network purchase order ( no funds center entered/

Hi,
we are facing one problem while doing miro of network service purchase order. System is giving message 'No funds center entered/derived in item 00030'.
We have activated funds management in Jul'10. The said network service PO belong to previous year. Also we have changed
commitment item of GL account related to concerned service order in Jul'10 & posted GRN one in apr'10 & one aug'10.
System is not allowing to cancel the service entry sheet.
Can anybody help on this.
regards
abhishek

we had activated the trace facility for FMDEIRIVE & found that all FC/Commitment item derived correctly. But while posting the document it is throwing an error.
Regards
Abhishek

Error while doing settlement from WBS to P&L Account

Hello
I am trying to do a settlement from WBS to P&L Account(Expense account). In this case, "Dummy" Prof Ctr is getting derived from 0KE5 (we have maintained a dummy prof ctr). We have set the validations to disallow any postings/settlements to dummy prof ctr. Hence I am getting an error while doing settlement.
Now I am maintaning a Prof ctr in my WBS master data. I am unable to understand why system is deriving dummy prof ctr and not the one maintained on WBS master data. The settlements are working fine when I do them against Balance sheet accounts and proper prof ctr is getting derived, which is being maintained on WBS master data. I am getting trouble only while doing settlement to my P&lL i.e. expense accounts.
can anyone throw some light on this?
Thks
Sarang

Dear Sarang,
You have maintained profit center in WBS master which is not updated at the time settlement to FI that what makes you worried. If you are making FI posting and give WBS as an additional account assignment then Profit center in WBS master will be updated. Here in settlement WBS is sender not the receiver so that profit center will not be updated. In settlement receiver (any) is debited and sender (WBS) is credited so this credit entry will be updated in profit center.
To your second query that when you carry out settlement to balance sheet account right profit center is updated then please make sure, that balance sheet account is maintained in 3KEH with profit center or OKB9.
Your P&L account (expense) receives dummy profit center because it is not able to find cost center which can fetch profit center from the master. So, if you can afford, maintain that cost elements (expense account) with profit center in OKB9.
might help you..........................................................

Error while doing Goods receipt for process order. Error code: "BS027"

I am getting error while doing GR for a day whereas previous day(s) GR is already done and also 2 days post that day are also done successfully.
Error : ""Goods receipt for prodn. order" is not allowed (ORD XX-CEMTSAL) " (XX = First two characters of plant code)
Error code: BS027.
Thanks to all in advance.

Hello,
This issue would occur when you want to post a confirmation for a production order. The error message is generated if you wanted to post a backflush for a component and if this component was assigned to a sales order stock. The sales order itself was assigned to a work breakdown structure element which should be debited with the actual costs. However, the business transaction 'Confirm' is not permitted for a work breakdown structure.
Please look into SAP Note 62367 and 64370
Hope the information is helpful
regards

Error while doing AUC Settlement in KO88

Hi
I am getting the below error while doing KO88. I have maintained the Allocation structure for FXA and given the cost element group in the Source field & Given FXA in Receiver category and selected By cost element option aginast Receiver category FXA in Settlement Cost Element field. I am getting the below error while settling in KO88.
Define a settlement cost element for receiver type FXA
Message no. KD506
Diagnosis
In allocation structure A1 (controlling area BP01), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
Procedure
Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
Please help me
Thanks
Kishore

Please check your allocation structure , it looks that settlement cost element that you have assigned in the allocation strcuture is not having correct cost element category.
regards
Ranjan

I am getting error while doing MFBF for semifinisg good

Hi,
i am getting error while doing MFBF for semifinisg good
Existing standard cost estimate cannot be used
Message no. RM175
Diagnosis
This error appears under the following circumstances:
The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
Procedure
The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
Use product costing to create the standard cost estimate.

I had already check REM profile repetitive mfg profile final backflush w. activities.
this particular material is semifinish material attached in BOM of finish material.
backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
i had assign production version , done routing and maintain REM profile,
created material cost with quantity structure ck11n then run the costing in ck40n.
still getting the error what else is to done to able to book this thru MFBF.

Settlement to different business area cost objects

Dear all
In my requirement We are carrying the work at one Business area on behalf of another business area. The maintenance order has some expenses amount,after completion of the job i need to settle into another business areas cost objects. But sap is giving the error only. Is ot possible?

The below error is getting while settling orders into another Business area cost objects.
There are no accrued amounts; settlement is not possible.
Message no. KD256
Diagnosis
The sender has a results analysis key, but no accrued values.
Either the accrual was not yet started for the sender, or the values to be settled from the accrual equal zero.
Note
Actual costs are only settled once the sender is technically completed or finally delivered.
This applies to
o     Projects that cannot carry revenues
u2022     In Service Management for sales order production to the indicator (Calculate WIP for orders in sales order production) set in the accrual version for
o     Production orders
o     Internal orders with no revenues
o     Orders with no revenues
u2022     In Service Management for engineer-to-order production to the indicator (Calculate WIP for orders in engineer-to-order production ) set in the accrual version for
o     Internal orders with no revenues
o     Orders with no revenues
u2022     In Service Management to the indicator (Calculate WIP for internal and service orders with no revenues) set in the accrual version for
o     Internal orders with no revenues
o     Orders with no revenues
u2022     To the indicator (Calculate WIP for production orders without settlement to material) set in the accrual version for
o     Production orders without settlement to material
Procedure
1. If necessary, start the accrual calculation for the sender
2. Restart settlement

Cost center error when posting to a fund - Message KI222

Hi,
We are getting error KI222 when we try to post to a fund. The message says Cost center XXX/ABCD does not exist on xx/xx/xxxx. The problem is we do not have a cost center called 'ABCD'. Note 315350 has already been applied in our system.
Has any one seen this error? if so, how was it fixed?
Thanks.

Hi
I am also running into this issue. I am trying to post a cash discount and system is throwing this error that cost center does not exist on this date. But we do not have any cost center with that number.
Were you able to resolve your issue? If so, can you please share the solution. I appreciate your help.
Thanks,
Shalu

Error while doing ABGL Asset Credit Memo

Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
Sunil

Hi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu

Error while doing GR for scheduling aggrement

Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
Prasad

Hi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you

Error While doing ABT1N transaction

Hi,
I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
Error Message -No depreciation area for receiving the revenue
Message no.AAPO149
Diagnosis
You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
In both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
Proceedure
Check the transfer variant and check your entry
please do the needful
Thanks
Supriya

Hello,
You will have a check box for the same.
Double click on transaction type, you will see the check box for revenue.
Otherwise, tomorrow I will get back to you once I am in front of the system.
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM

Error while doing F-90 Asset Acquisation

Hi,
I am getting the below error while doing F-90 Asset Acquisation scenario. Please help me to fix this issue.
Tax code V1 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
Thanks
KB

Hi,
you need to maintain Tax Code A0 & V0 in t.code OBCL t.code.
and also ensure to check whether you have created tax code V1 or not in FTXP t.code. If not, create V1 tax code and assign GL on that in the right Transaction event keys in OB40.
Try.... if not working let me know....
Regards,
MOhan.

Business Area-Cost Center error while doing VL09 (PGI Reversal)

Similar Messages

Maybe you are looking for