Business Area while creating Sales Order

Hi everyone,
I have the following error in creating sales order:
"No business area can be determined for item 000010"
The business area is assigned to my plant and division.
Any ideas???
Regards,
Edited by: Smitha Kaikela on Apr 30, 2008 2:03 AM

Thank You so much for your replies. I thought I had done the business area step, but I was indeed missing a small config.
Anyways that is done but am still not able to create my Sales Order.
Pricing Error: Mandatory Condition MWST is missing.
I defined a condition record (VK11) for MWST and also defined the pricing procedure for my sales area with MWST.
But the sales order still gives the same error. I tried logging out and creating it again, but no good
Please help
Rgds,

Similar Messages

Error in sales area while creating sales order

Can anybody guide us in solving following issue-
While creating a sales order, if there is mismatch between customer sales area (Particularly division) and material master division-
1.the system is giving error message & not allowing to save the sales order for one sales area,
2.but at the same time it is giving warning message and allowing to save the sales order for other sales area.
Thanks & Regards

Dear Mrunal
Check in IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Business Area Account Assignment --> Define Rules by Sales Area whether the respective Sales Organization, Distribution Channel and Division are assigned.
Also check in <b>OVXG</b>.
Either of the above is missing in your configuration and hence the error.
Thanks
G. Lakshmipathi

How to restrict the order reason in Tcode Va01 while creating sales order

Hi Gurus,
My requirement is
while creating sales order in VA01
if order type is Zvol
than the list of order reasons has to be restricted.
Now 15 are coming from OVAU tcode
I need only 5 from these.
Thanks & Reagrds
kals.

Hi,
By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
regards
JKM

Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

Thank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan

Error while creating sales order

while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.

Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren

Error while creating sales order with ref to contract

while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).

Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you.

Hi error while creating sales order

hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rocky

hi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas

Run time error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please
Moderator message - Cross post locked
Edited by: Rob Burbank on Jan 7, 2010 10:03 AM

ths

User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.

Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID

How to manual maintain TAX condition value while creating sales order

Hi
I am creating one Tax condition suppose JLST without access sequence .
while creating sales order I am manually maintain the % value of TAX. suppose it is 1%
then I see It show some value in TAX .
save that sales order & creating delivery document for that but when I create Invoice its show error.
" Tax code in procedure CMTAXP is invalid ".
I know the configuration only for Tax condition with vk11 condition record .
BUT now I want to maintain TAX condition at the time of creating sales order.
so I remove the access sequence of that condition .
but It shows tax code error while billing.
My main question is that If i maintain condition record while creating sales order then how i can assign Tax code .
Can it is possible ?
if yes then How?
please help me.
thank you

Hi,
The "straight-forward" answer for Tax Code creation is contact the FI consultant. He shall help you, by creating Tax codes.
I have tested, with creating a tax cond type (copy of MWST) & manually entering values. I can create Sorder, Dlv and Bill but I cannot create an Accounting document. That is because of every line (amount) a Tax code is necessary.
I THINK, you can NOT have manually filled tax codes; access sequence is needed to get the tax value (%) and the Tax code from the condition record.
There is lot of material on the web to understand Tax classification, code etc. etc. See a useful link below -
http://www.sapgeek.net/2010/04/sd-determines-tax-code/
In short Tax code is a must and take the help of your FI consultant for the configuration of the same.
BTW - Tax code is already made created for MWST, therefore I suggested that you can use MWST. Furthermore, you can change the values corresponding to Tax codes in FTXP.
But if you are a beginner in these things, better take help.

Condition tab in display mode while creating sales order.

Hi Guys,
When I go to create a sales order the condition tab shows all the condition types in grey, irrrespective of its being manual or mandatory. I know it has nothing to do with V/06 or standard pricing transactions. So I changes the item categry.Again used the same order type, same customer , same material and same sales area. Once I change the item category to Zxxx, Condition tab becomes changeable. So I concluded that item category is the culprit. But the question is Which part of item category is influencing it ?
Please help.
Regards,

Hi Phani,
While creating sales order (VAO1), I go to item level and click on condition tab. I see all the things in this tab grayed. Nothing is changeable. I changed the item category, while the pricing procedure was same as the old one. Condition tab became changeable. So it has something to do with item category. But what is that one thing missing in my item category which is making condition tab grayed out..?
Regards,

How to change the status of material while creating sales order via BDC

Hai.
In BDC while creating sales order( va01 posting ) it is stucking up in middle saying material is new. I.e Sales order (va01) is not getting created because of material status is new . I want to create sales order (va01) even material status is new.
pls give me out the solution. Points will be rewarded.
thanks & regards,
sami.

Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore

Runtime error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please

Please note the error details
Runtime Errors         SYNTAX_ERROR
Date and Time          07.01.2010 17:43:06
Short text
Syntax error in program "RK2LSFOC ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RK2LSFOC " in include "RK2LSFOC
" in
line 128:
"No component exists with the name "KWBRUM". ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RK2LSFOC ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program RK2LSFOC :
"No component exists with the name "KWBRUM". ."
|    " "

I want to know about ATP check requirement .generally we assigned yes or no while creating sales order

I want to know about ATP check requirement .generally we assigned yes or no while creating sales order what it means when we give Yes or No. how pegging flows
Regards
virender

Virender,
Can you be a bit more specific about ".....generally we assigned yes or no while creating sales order....." Exactly what field(s) did you 'assign'? Screenshots would be helpful.
With respect to pegging; in general, ATP has very little to do with pegging. Pegging is more of a planning concept, and not an 'availability checking' concept. There are a few exceptions in APO, but they are not commonly implemented.
Can you elaborate about exactly what you want to know with respect to 'pegging' and ATP?
Best Regards,
DB49

Business area tab in Sales order is greyed out

Dear Experts,
My requirement is that i need to give business area in the sales order.But even when we are creating the sales order the business area field in the account assignment is greyed out even when the recon account the field is set to optional entry.
Help rerequired urgently.
Thanks in advance,
Ramesh Babu.

Dear Ramesh babu,
Please check in which table the business area is assigned to plant /sales area.
It is T134G.
Using the exits mentioned under the heading 'User-Exits for product allocation' in the below link,
http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
check whether you can pick the plant and division from the order and input the business area (based on the entry maintained in T134G against the Plant and Division ) using ABAP help.
Thanks & Regards,
Hegal K Charles
Edited by: Hegal . K . Charles on Sep 16, 2011 10:54 AM

Business Area while creating Sales Order

Similar Messages

Maybe you are looking for