Business Blueprinting

Hi,
I like to know how does BBP takes place. Who supplies the requirements of business to SAPers, when taking the BBP what form it is recorded in, means written/or through outlook or some sort of questionaire ??
What happens after recording the information, does it goes for some sort of authorisation?
I mean a complete process in BBP.
who sits with the client to know what they want..I am completly in dark and just imagining the situation.
I feel project manager sits with some one in company who have complete knowledge of the business process and then start listing there requirement...I really dont know.
I searched on internet, and what I found is only BBP is know the requirements and then go for the gap analysis and then realizatiion. Of course I know the ASAP and all its content but by now you know what I am looking for.
Could some one throw some light on this issue for  me in detail to come out of this darkness ??
Venksys..

i My dear Ashish how are you doing,...........This is Srinivas from Sydney would like to have the Business Blue prints of FI and Co if you have,...............please brother i need them,........apart from that if you have other real time issues please send them across,..........recently i have completed my course and searching for job in Sydney,..........here market is very good,............but all are asking bit real time issues,..........if you could send me some Production related Tickets also it will be a gr8 help,...........hope and wish a Help from,..........
Please do mail all the stuff across to my mail id [email protected],..............
Waiting for your kind help
Cheers
Thanks in Advance
SrinivasH
Sydney

Similar Messages

  • Getting error while generating Business Blueprint Document for Project

    Hello Experts,
    I hv created a project in Solution manager 3.2 through solar_project_admin . Now iam in the phase of defining its Business Blueprint . I hv completed the steps, at the end when iam generating Business Blueprint document ,following error is being displayed:
    <b>Blueprint document cannot be created. Check the selection
    Message no. SOLAR110
    Diagnosis
    A Business Blueprint document created for the selected selection options would contain no structure elements. It would be empty, so it is not created.
    Procedure
    Choose less restrictive selection options, especially the option
    "Print Structure Elements: Complete Selection" in the "Options" tab.</b>
    I hv checked this error and the option displayed above in the error message but no such option is being displayed anywhere,can anyone plz help me out with how to resolve this problem?
    Requested to revert at earliest as iam stuck with this since many days,My email id is <b>[email protected]</b> .
    Regards,
    Saumya

    Hello Horst ,
    Thanks for ur reply.I hv now again tried to Generate Blueprint Document with unselecting option Only with Documents but in the structure selection when i tick on all the options given in tat structure then regenerate Business blueprint Document ,following error message is displayed:
    <b>Error 130: Business Blueprint cannot be generated
    Message no. AI_SOLAR08130</b>
    For this error no long text/ explaination exists .But when i try to generate Business Blueprint Document with unselecting option Only with Documents but in the structure selection unticking on all the options given in tat structure then following error message is displayed:
    <b>Blueprint document cannot be created. Check the selection
    Message no. SOLAR110
    Diagnosis
    A Business Blueprint document created for the selected selection options would contain no structure elements. It would be empty, so it is not created.
    Procedure
    Choose less restrictive selection options, especially the option
    "Print Structure Elements: Complete Selection" in the "Options" tab.</b>
    Plz revert back, wt shld i do now?
    Regards,
    Saumya

  • Problem in pricing regardinr business blueprint

    HI Gurus,
    i am new in sap sd field i just put my foot in this field.
    i got business blueprint for sap sd implementation i have folloing problem in pricing please help me out.
    <b>1</b>.Do you require the functionality to create user-defined indexes in the pricing table? This will enable you to search for your prices using company-specific search criteria such as what operation input ?what prices on a certain day?
    2 Do you ever base the prise of an item on the cost to manufacture or purchase the material?
    3. Eill you need to pas pricing information to the sales informatiom system?
    how to configure above requirement in business blueprints?
    please solve this problem
    Ketan Katara

    I install Oracle Business Process Architect 11g again but with local DB. there is quick start example. when I share blueprint that project, It is ok but when I add a repository server and share a project inside it nothing happen.
    I dont know why???? please help me.
    sorry for my bad english :(

  • Generating Business Blueprint in Word 2007

    Folks:
    Does anyone have a fix for generating a Business Blueprint in Solution Manager when the document is generated in  2007. When you run the marco to build the blueprint, it does not link the documents and the blueprint is incomplete. This is not an issue if you are using Word 2003.
    Thanks
    Ajay Narula

    In MS Word 2007 change Micro Trust setting may help you.
    In menu>Word Options>Trust Center>Trust center settings>Enable All Micro.
    Thanks
    Andrew

  • SAP WM - Develop Business Blueprint

    Hi All,
    We're in the process of implementing SAP WM.
    Can somebody share their experience regarding preparing the implementation roadmap and developing a business blueprint ?
    Thanks
    Meghna

    Hi,
    go tru this link
    http://64.233.167.104/custom?q=cache:NkhFnD-W-20J:www.catalystinternational.com/Content/Knowledge_Center/Downloads/casestudies/Intermec_CaseStudy.pdfSAPWM-DevelopBusinessBlueprint&hl=en&ct=clnk&cd=4&gl=us&client=pub-3687694581336538
    regards,
    sasi

  • Sap pm business blueprints

    hi friends
    I have a argent requirement of sap pm business blue prints
    any one if have than please send me or tell me the link from i can get BBP
    thanx in advanced

    Hi,
    It is not possible and advised to share blue prints of client. The best you can do is to download SAP Best Practices from SAP Service portal. Your colleague in BASIS team can help you download that, if required. Refer to the business blueprint made by SAP, that should give you good idea.
    Regards,
    Ketul

  • Performance Tuning Section in Business Blueprint

    Dear Gurus,
    I am at a client location doing a blueprint. We are in the closure level of the business blueprint and one of the sections need to be added is the Performance Tuning. Can anybody suggest me what would be content to be added in the Performance Tuning section of blueprint. If anybody got the content section with them please forward that to my mail id, i.e. [email protected]
    Thanks and regards
    Vijay

    Hi,
    Think abt all BI is made up of an dhow to tune them..
    Some hints:
    1 Performance tuning for data loads : ( number range buffering, parallel loading..pseudo delta..chnging technical properties of tables if rec >100,000...IDOC clogging...etc)
    2) Performnce tuing for Queries Aggregate...Cube modelling, OLAP cache....efficient multiprovider queries.etc.)
    MEntion about transactiona whoich you will require for these things..such as RSRV..RSRTRACE..STO3n..ST05..etc...
    gaurav

  • Business Blueprint

    Hello
    I was reading an article on SAP and came across the word business blueprint.Is this something like your functional specifications or entirely different from that ?
    Googled the word and came across a few blueprints but I am unable to co-relate it with SAP.
    Kindly shed some light on blueprint in SAP and also request you to send some material on this, probably a sample blueprint.
    Thanks a lot
    Jessy

    Hi Jessy,
    Business Blueprint is a phase in the project where you study the current business process of the client in As Is stage and then try to provide a solution to the business requirements in the To Be stage using the Best Practices suggested by SAP. The org structure, Transaction types, business steps, Gaps in the solution etc are maintained in the Business Blueprint doc.
    Based on the BBP doc the realization is done in the realization phase.
    Functional specifications are created when some functionality needs to be developed to meet the business requirement. The functional specification gives the functional requirement and the output desired from the technical development.
    BR,
    Rekha Dadwal
    Kindly reward with Points!!!!

  • Generate customer specific Business Blueprint in SOLMAN

    Hi there,
    i tried to establish a customer specific layout for the business blueprint that is generated by solution manager. starting off with the document header i replaced the logo in the solarblueprint.dot and .doc and uploaded both files to solution manager. after generating the blueprint there is the customer specific logo on the first page. on the other pages, there is still the sap-logo.
    does anyone have a quick solution?
    cheers
    art

    i won't get any points beceause it is my own question... but who cares
    the problem is that the template-document has a new chapter starting after page one, which then is relevant for the rest of the document. so, the solution is pretty easy. for both, the .doc and the .dot document:
    1. Adjust the template header at page one.
    2. Click on the normal text field.
    3. Click a couple times on enter until page 2 shows up.
    4. adjust the header on page 2.
    5. save the document.
    6. upload the documen.
    7. create your bbp from solar01.
    Hope it helped you guys
    cheers
    arthur

  • Generating Business Blueprint

    Hi,
    I seem to be having problems generating the business blueprint, we are doing an HCM project and i have defined the following in SOLAR01
    1. Organizational Units
    2. Master Data
    3. Business Scenarios
    under the business scenarios, i have assigned the business proccesses from the HCM component.
    my question is, is there any transactions that must be assigned to each individual business process?
    the business blueprint comes up blank, but i have the structure, the master data and the business scenarios.
    what am i missing in the setup?

    Hi Trevor,
    If you are in Business Scenario Section in SOLAR01 -  make sure you select and give the following information.
    Organizational Unit
    Master Data
    Business Processes
    eg:-
    if you select Sales as Business Scenario
    once you click on Sales -  in your right hand side you will see Proj.Documentation Section there you upload your business process Document/Blue Print and Blueprint-Relevant Tab should be checked.
    and make sure you have given the following.
    In Organizational Units
    Sales Organization, Distribution Channel, Division, Sales Area, Sales Office  and Sales Group
    In Master Data
    Customer Master Records, Product Master Records, Condition/Pricing,Cusotmer Employee Master..etc.
    In Business Process
    Sales Order Processing
    Regards
    Rayees Palot

  • Difference between business blueprint and functional spec

    hello
    can somebody please tell me the difference between business blueprint and functional spec and how they are interrelated
    Thanks

    Hi Comandante,
    Business Blue print is a detailed documentation of the requirements gathered from client (The objects we need to develop are modified depending upon clients requirements).It represents the business process requirements of the company.  It is an agreed statement of how the company intends to run its business within SAP system.
    Functional specifications (functional specs), in the end, are the blueprint for how you want a particular report and transaction to look and work. It details what the report will do, how a user will interact with it, and what it will look like. By creating a blueprint of the report or transaction first, time and productivity are saved during the development stage because the programmers can program instead of also working out the logic of the user-experience. It will also enable you to manage the expectations of your clients or management, as they will know exactly what to expect. Functional Spec streamlines the development process.
    A functional specification  is a formal document used to describe in detail for software developers a product's intended capabilities, appearance, and interactions with users. It guidelines and continuing reference point as the developers write the programming code.
    Other processes include Requirements, Objectives,Logic Specification,User documentation,The Final Product.
    Hope this Helps, Revert for any further info.
    Cheers,
    Tanish

  • Difference between Business Blueprint and Configuration

    Hi all,
    I'm new on using the Solution Manager and I really don't understand what's different in configuration and business blueprint.
    Can anybody give me a short overview of that?
    Thanks

    Hi Gross,
    Blueprint is mapping the business process of the company into SAP, whereas Configuration if making the setting in SAP to the needs of the company as per the blueprint.
    Regards,
    Suraj

  • Business Blueprint Structures in Solution Manager

    Hi,
    Can we change the structure node names under Business Blueprint tree on Solution manager. This is accessed by SOLAR01 transaction.
    Thanks and Regards,
    Vinayak Thorat

    Hi Sai
    answer is more simple the way you add standard business process in structure tab solar01, same way you can add master data or organization model for business process.
    e.g.
    you can add customer master or vendor master as a master data for a E2E process
    in all the situation we use this because practically no process works without master data but its upto the level of documentation you want to make in solution manager rather than dumping project documents only and making it more meaningful by adding above
    i hope you have got the answer now
    Regards
    Prakhar

  • Creation of business blueprint doc doesn't work

    Hi all,
    I've got a big problem and I don't know how to solve.
    It couldn't be difficult. Please help me!
    I tried to create a business blueprint document for my project. I selected structure elements and all that stuff and started it. Then I get the message that it worked correctly and was saved to directory.
    But when I open the .doc file it is empty. Why???
    Can anybody help? Thanks in advance

    Hi,
    You have to run the macro "SAP_BUSINESS_BLUEPRINT" within
    the MS Word document in order to get the business blueprint document generated. Choose menu item:
    Tools->Macro->Macros, select "SAP_BUSINESS_BLUEPRINT" and press "Run" button. This should work.
    Horst

  • TEMPLATE CHANGE OF BUSINESS BLUEPRINT-SOLAR01

    Dear Friends,
    Our requiremnet is to replace the Standard business blue print template with our project specific template.
    I did the settings as below.
    SAP Solution Manager Implementation Guide->SAP Solution Manager->Scenario-Specific Settings->Implementation->Document Management->Generation of Documents->Adjust Template Files for Generation of Business Blueprint Document
    Selection 2
    Document
    SOLARBLUEPRINT.DOC
    I have uploaded a customized Template with our project specific Header and footer and Logo.
    When I generate the business blue print system adopting our customized template only for the first first page of the document.In all other pages it is taking the standard template with SAP Logo.
    What should I do to get the customized template for the entire document.

    Hi,
    I am working in Template management and Solution documentation for one of my client and he wants to have his own company name and logo on the first page of the Blueprint. Is it possible to change the layout of the predefined Blueprint Document ?
    I have read the same  http://help.sap.com/saphelp_sm71_sp05/helpdata/en/24/5ced3a88532030e10000000a11402f/content.htm
    adjust the layout, but i am not sure as to how can I modify the solarblueprint.dot file that is generated when we create a blueprint document.
    Please let me know the method to change the layout of the blueprint document.
    Thanks and Regards,
    Kavita

  • DMS business blueprint

    hi all,
    basically i am mm consultant ,now I am alloted a new project in DMS module.Please help me in getting the following..
    1. SAP DMS Business Blueprint
    2. Question - Answer Database of Client.
    my mail [email protected]
    useful help awarded be sure..thx in advance.

    Hi all,
    please note that the distribution, participation in distributing or otherwise sending of this material is against the law. The material you are requesting is copyrighted material and available ONLY to customers of SAP. If you need such documents from the SAP Service Marketplace then you must have "S" user ID and login yourself to retrieve this material. If you do not have a "S" user ID then you should contact your own internal company groups responsible and request one or request them to retrieve the document for you. By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN and BPX. DO NOT send material via email such as this! Further actions will result in officials within your company and your SAP Sales Account being notified and could result in legal action against you as an individual.
    You will find all information on DMS customizing in the SAP Online Help under http://help.sap.com
    SAP ERP Central Component >> Cross-Application Components >> Document Management
    So please visit the Online Documentation and do not send any documentation files by SDN forum
    Best regards,
    Christoph

Maybe you are looking for

  • Safari won't open...kernel issue?

    dont know what happened but safari wont open randomly. Started suddenly, no real reason... here's the error sheet: Process:         Safari [714] Path:            /Applications/Safari.app/Contents/MacOS/Safari Identifier:      com.apple.Safari Version

  • Using a network-stored catalog with Mac OSX

    Greetings all. I am using Photoshop Elements 11 on Mac OSX Mountain Lion and want to store my catalog on a local network drive (FreeNAS).  I have encountered many problems while attempting to do this.  Then I noticed in the Elements Organizer help, u

  • 24fps output to tape doesn't work

    I have a 24fps sequence (which I'm outputting to film) and want to output it to DV tape. But when I print to tape, or even playback the sequence with my deck recording it, only the first image appears, with no movement. I'm using a Sony DVCAM DSR-11

  • View offending records in audit viewer for set-based mappings

    i have mappings which is configured to load data from Oracle9i external tables into Fact tables. i am using set-based loading with reject limit set to 0. Whenever there's an offending record from the external table, the whole mapping will fail with m

  • Corrupt Library - how to resync iPhone & iPad

    My iTunes library is corrupt - I have some issues with podcasts not being deleted properly. I know how to rebuild my library via the Apple Knowledge base article http://support.apple.com/kb/ht1451. I know that that works and solves my issue. All my c