Business Content Contains IS InfoObjects ?

Hi all,
We are new to BI and are trying to activate some Business Content. I have choosen 1 cube and selected only necessary objects. It looks like the cube contains InfoObjects that are for industry solutions such as Retail. We don't use Retail so my communication structure does not match my transfer structure. Can anyone tell me what I am doing wrong? Should all the different Industry Solutions exist in D status in BI? Any help would be appreciated.
Thanks, Mark

Usually you have to search for the relevant infocubes which is categorized in Business Content.
Activating business Content should be done in the following way.
Set the Collection mode "Start Manual Collection".
In Grouping Select "Data flow before".
You have to drag the 0PUR_C01 and push it right window.
Click the Gather the Objects (it will look like "Execute" Button).
By this you will get all the infoobjects,transfer rules and infsources.(I doubt whether you will get the ODS.If the update rules of 0PUR_C01 is based on ODS then you have to collect it separately.But I think this cube is updated directly.The problem is you don't know which is the ODS for a cube.You can get it from Meta Data Repository.)
You can set the source system (Yellow Button next "CTO") by which your source system assignments will be over.
select "Install in Background".
You can check the Job overview in SM37 whether the installation is over or not.
With this you will be able to do the Extraction.
For Queries and Workbooks you have to select "Data Flow after" in the grouping.
Look at the infocube and find any gaps are there and you can add those keyfigures and characteristics.
Accordingly you should modify your datasources also at the R/3.
First you have to load the master data and then Transaction data. If not you will find performance issues.
Finally award points if I my suggesstions are working.
Regs
Gopi.

Similar Messages

Error InfoObject inactive while activation of Business content for cube

I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM

Hi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye

Activation of InfoObject in Business Content

Friends,
I tried to activate the InfoObject 0SALES_UNIT in the Business content and got a green signal stating that it is activated but i dont see it under the InfoObjects in AWB. Please suggest what possibly may be going wrong.
Thanks
Mike

I searched it using the InfoObject's technical name in AWB under InfoObjects but it does not figure there.
Thanks
Mike

Missing InfoObjects in Business Content for Higher Education & Research

Hello
According to the SAP documentation "[Guideline u2013 BW Content 3.53 and 7.03 for Student Lifecycle Management|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23]" there should be an InfoObject 0HE_EVPRST_TEXT. Unfortunately, I can't find it in the Business Content of my SAP BW.
Furthermore,...
- InfoObject 0HE_EVENT_ATTR has a different structure in the business content than mentioned in the documentation
...and...
- I can't find the DataSource 0HE_SLC_PI_1 in the business content although it's mentioned in the documentation.
I've already posted in Re: Transformation between DataSource 0HE_EVENT_ATTR and InfoObject 0HE_EVENT but nobody could help me there.
The BW version is SAPKW70022 and BI Content version is SAPK-70405INBICONT.
Can someone help me in this forum section? Thank you!

Hi Patrick,
For your 0HE_EVENT_ATTR question:
Please take a look at SAP note:
- 1296185 --> https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1296185
- 1396684 --> https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1396684
For your 0HE_SLC_PI_1 question:
Did you apply Ehp4 in your SAP SLcM system? If not then the Performance Indices extractors are not yet available in your system.
For your 0HE_EVPRST and TEXT question (related Processing Status for Academic Events Planning):
Did you apply Ehp3 in your SAP SLcM system? If not then the Processing Status for Academic Events Planning are not yet available in your system.
I hope this helps.
br,
Rob

Business content infoobjects are still in verion 2.x & 3.x

Hi all,
We have upgraded our system to BI 7.0 from BW 3.5, when we check customer created infoobjects thy look fine,but business content info objects show us version 2.x and 3.x, Why is it so.do we need to do some migration for this.We used the latest version of business content available.
Thanq all.
Regards,
Robert

As sanity check ,ar you looking at the business content which was already activated before upgrade??
try to activate the business content from fresh now ,plain vanilla and see what it gets you.
Hope it Helps
Chetan
@CP..

Error on installing infoobject catalog from business content

while performing Install from Administrator Workbench:Business Content I am getting error.
I am trying to install Infoobject catalog 0MMIC_CHA01 and 0MMIC_KYF01 from business content
The error messages appearing are as follows:
Installation (simulation mode) of: InfoObject (IOBJ)
Checking Objects with Type InfoObject
Checking InfoObject 0BPARTNER
Char. 0LEGALFORM is exclusively an attribute (cannot be a navigation attribute)
Checking InfoObject 0CM_CDT1
Char. 0CM_HIEID may not appear in compounding and attributes simultaneously
Characteristic 0CM_CDT1 is used as Navigation Attribute of 0RT_SEAROLL, but characteristic
IInstallation (simulation mode) of: ODS Object (ODSO)
Installation (simulation mode) of: Update Rules (UPDR)

Hi
It seems although's are warnings and not errors. Instead of using Simulation just install the content.
check out the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89?QuickLink=index&overridelayout=true
Regards,
Venkatesh

Error installing Business Content: InfoObject Catalogs

hi all,
just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
I'm trying to activate:
InfoObject Catalog (technical name) : 0CHANOTASSIGNED
InfoObject Catalog(description) : Unassigned characteristics
upon installation here is the job log that i got:
Message text | Message class | Message no. | Message type
Replication completed successfully | RSAOLTP | 33 | S
Replication completed successfully | RSAOLTP | 33 | S
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
Assign a package | TR | 709 | S
Specify the package or flag it as a local object | TR | 742 | E
Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
what seems to be the error here?
thanks and regards,
karl

hi chintamanim,
thanks for the response.
i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
does this have an effect on the error i got from activating and receiving the error upon activation?
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
I did follow a document for Building Block Configuration Guide:
B03: General Settings for BI Integration
and the step is included here:
Activating Business Content: InfoObject Catalogs:
1. On the Data Warehousing Workbench: Business Content screen:
a. At the top of the right hand frame, choose Grouping and select In Data Flow Before.
b. At the top of the right hand frame, choose Collection mode and select collect automatically.
c. In the left hand frame, select Object Types.
d. In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
2. In the Selection of Query Objects dialog box.
a. Select the following InfoObject catalog:
0CHANOTASSIGNED
b. Choose Transfer Selections.
c. If a dialog box Remote Activation in the Source System <> occurs, choose OK and log on to the source system on the following screen.
d. If a dialog box appears Exceeded runtime when collecting objects choose Continue.
3. At the top of the right frame, choose Install and select Install in Background.
4. In the Install Business Content in the Background dialog box choose Yes.
5. In the Information dialog box choose Continue.
6. Choose Exit.
please advise on how to continue.
thanks and regards

Business Content BW InfoObjects (PAYR-CHECT & PAYR-ZBNKL)

Hi,
I tried to find the following BW InfoObjects in Business Content but failed.
Can anyone advise me what are the corresponding BW InfoObjects for:
1. Check number PAYR-CHECT
2. Bank number of the payee's bank PAYR-ZBNKL
Thanks in advance!

Dear Fulham ,
Check Number -- 0SMSPCNO --- Check Order Number .
Bank Number of Payees Bank -- 0RPA_BCD .
Hope it helps.
Thanks,
Krish
*Assigning points is a way of sayin Thanks in SDN

Can't find an InfoObject but it is activated from Business Content

Hi
When I review the Business Content component on the left hand side for the objected type InfoObject 0HIER_NODE, it is activated. But when I try to find it from the InfoObject component on the left hand side or RSD1, it is saying that the 0HIER_NODE is not found or entry is not selected.
How can I get to use 0HIER_NODE to map to the InfoSource? I can't seem to find it.
Thanks
Will

Hi Voodi,
Our requirement has to do with using the Z table to fill the table from the R3 side to do both the R3 and BW authorization restrictions. We are tansferring the data from the Z table to BW to the ODS to generate the profiles. I hope it is making sense so far.
The problem is the following:
1. One of our hierarchies is manually created that there is no root but ony the yellow InfoObject symbol (first level) and then the green InfoObject symbols (second level).
2. The other hierarchy is created by using BW07 that has the root node with the vanilla folder symbol (text node) and the second level node with vanilla folder symbols (text node) and then the green InfoObject symbols for the third level.
3. There are differences between these hierarchies, and the ODS InfoSources are mapped:
A. 0TCTNIOBJNM -> Yellow InfoObject symbol (for example, 0COSTCENTER)
B. 0TCTIOBJNM ->Green InfnoObject symbol (for example, ZDEPARTMENT)
According to what I have seen, the hierarchy for item 2 is the way to create hierarchies, similar to what the white paper "How to ... Work with Hierarchy authorizations" illustrates the procedure to set up the authorizations for hierarchies.
I have to make changes to the ODS InfoSource mapping in order to make use of hierarchy item 1 because we are using the Z table to generate the profiles.
What would you do? Certainly there is a difference between using the the Z table and using what SAP suggests per the How To paper. I think my explanation makes sense..
I also wanted to add that the authorizations set up at this time works for item 1 but not for item 2. This is the reason that the text node is mapped as a constant.
Thanks
Message was edited by:
Will Ferrell
Message was edited by:
Will Ferrell

Error Installing Business Content InfoObject 0GN_VENDOR

Hi,
I installed 0GN_VENDOR from Business Content. It was not active after installing.
When I try to activate 0GN_VENDOR I receive the following error messages:
Attribute 0DBCTRYCOD from characteristic 0GN_VENDOR not (actively) available
Attribute 0DBGUDUNS from characteristic 0GN_VENDOR not (actively) available
I looked in Business Content and found that the the two attributes do not exist in Business Content. So I am unable to install to correct the 0GN_VENDOR issue. I also do not find any related OSS Notes on the Attributes.
What should I do to fix this? Just remove the offending Attributes and activate 0GN_VENDOR?

Hi Kenneth,
Check for the inactive info objects 0DBCTRYCOD and 0DBGUDUNS and try to install these IOs too along with the 0GN_VENDOR.
If you are not able to find them in Business content then it might the problem with the BI content version installed in your system.
Regards
KP

Error in transfer structure while activating the business content

Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.

Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/]

Financial statement planning / Investment planning business content

Dear all,
Has anyone actually been able to make any of the standard business content for these areas work? The content has been there for 6 years but still creates innumerable headaches. I have managed to install the BC for e.g. financial statement planning based on cube 0SEM_C06. I then loaded the data using program UPB_DATA_IMPORT. This unfortunately was not sufficient for the majority of folders to work as the BC data provided did not cover the majority of infoobjects and contained none of the necessary hierarchies. I worked through the optios entries and generated the MD and hierarchies manually (though of course I have none of the texts or attribute information). Despite doing all this I still find some of the functions do not work. There are short dumps e.g. where it searches for planning functions that do not exist in UPF_PLNTP.
I see no notes on these problems, no SDN forums suggesting other people have run into these problems. We are BW 2004S patch 9 so I can't believe it is a patch problem.
Have I missed something in the ATS are which affects the set up of the master data and the available functions?
I would be very grateful for any comments of success stories or otherwise.
Many thanks
Heidi.

Hi Andrew,
Thanks for coming back to me.
We are not really intending to run using business content but want to activate it to use it as a guide on which to base our development. What I am staggered by is how difficult it has been to make it work. What I am wondering is: Are we having these problems because our system started off as a 1.2B BW system that has been upgraded all the way to 2004s? Are we missing table entries that we would have if we had started our BW system as a V 3.5 for example? If another implementation has activated all the BC without problems I will go back to OSS and ask them to provide the missing entries. If everyone has had the same problems I will soldier on.
Thanks
Heidi

BI business Content migration from 3.x to 7.0 - prerequisites

Hi all,
We have a old business content 0CO_OM_CCA_1 currently in use under BW 3.5, now we want to use this in BI 7.0. However, I do not see the migrate option in the context menu for this BC. I would like to know what are the prerequistie for migration of bC from 3.x to 7.0 in order to enable the migrate function.
regards.

That's right, business contents come in 3.x and during activation in BI 7 we now have option to emulate it as a BI 7 or keep it in a 3.x structure. However, what about an old 3.x info object that contains data from 3.x structure and is now required in BI7. How can I emulate it in BI7? Primary research suggest that the context menu of 3.x, in this case I don't have a migrate function available in the context menu for the said infoObject.
Is there any specific BW patch required to carry out migrate tool?
Regards.

What is the use of Match(X) or Copy in Business Content Collected Obj..?

Hi All,
In Business Content, After doing Drog nd Drop on Collected Objects, There, after Install Icon(I) we will find Match(X) or Copy (M) ......
Can anybody tell me what is mean by it and why and where do we use it.....?
Please Reply me.......
Regards,
Kiran Telkar

Hi Kiran,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡ the match indicator is not set and
¡ the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
a. Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
b. Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
hope this helps.
Regards,
Sreedhar

Transfering 0CUSTOMER from R/3 and activating in Business Content

Hi all,
New to BW. Trying to learn Data Transfer. Need help activating infoobject 0CUSTOMER in Business Content. I transferred 0CUSTOMER from R/3 without any problem. When i try to activate it in Business Content I get the following errors:
1) Char. 0CITY is an navigational attrib. of 0vendor. Exclusive attrib not possible
2) InfoObject 0CITY being used in InfoCubes or ODS objects --> error:
3) Characteristic 0CURTYPE: The length has changed from 000003 to 000002
4) SID Table /BI0/SCURTYPE contains data: Characteristic 0CURTYPE cannot be activated @35\QLong text exists@
Any suggestions would be greatly appreciated.
Thanks,
Prabhu.

Prabhu,
The error messages you got are for those InfoObjects that are already activated, and whose active version is different from the business content version. When you are installing 0CUSTOMER, you need to be very careful as to NOT INSTALL those objects that are already active, unless you specifically want to.
in the BC scrren, Right click on the 0CUSTOMER, and select "remove optional objects". Then the system will not select the active objects for installation again. Even after you do this, expand 0CUSTOMER tree to the lowest level and see what objects are prompted for installation. And remove the check marks for those objects which are alrady active
1) Char. 0CITY is an navigational attrib. of 0vendor. Exclusive attrib not possible
0CITY has been modified and the flag "attribute only" has been removed from it. You are trying to install it again, which puts the flag back. But, since it is being used as a NAV attibute, you can not do that. hence the eror.
2) InfoObject 0CITY being used in InfoCubes or ODS objects --> error:
Same reason as above. When you mark something as 'attribute only' it can't be used in InfoCubes or ODS objects.
3) Characteristic 0CURTYPE: The length has changed from 000003 to 000002
0CURTYPE in active version is different from the business content version. You are trying to change that again.
4) SID Table /BI0/SCURTYPE contains data: Characteristic 0CURTYPE cannot be activated @35\QLong text exists@
same reason as above.
Good Luck
Gova

Business Content Contains IS InfoObjects ?

Similar Messages

Maybe you are looking for