Business Content Extractor for SAP Controlling ?

Hi all,
I would like to know if there is an existing Business Content Extractor's for SAP BW for CONTROLLING - INTERNAL ORDERS.
What I need to be available from SAP R/3 can be accessible via :-
SAP R/3 -> Accounting -> Controlling -> Internal Orders -> Information Systems -> Reports for Internal Orders -> Line Item -> "KOB4 : Orders: Budget Line Items "
Thanking very much for your guide

Hi,
Check this site:
http://help.sap.com/saphelp_nw04s/helpdata/en/10/abab39fda7b86ee10000000a114084/frameset.htm
With rgds,
Anil Kumar Sharma .P

Similar Messages

What is the Business Content Extractor for HRP1000-OBJID ?????

Hi all,
    I want to extract the HRP1000-OBJID, HRP1000-SHORT, HRP1000-STEXT from
R/3 in to BW. The table name is HRP1000 (Info Type 1000 DB Table).
    What is the Business Content Extractor for these fields, please ?
    Thanks in advance.
Best regards.

There are a lot of datasource based on that table; chack this link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e2/72ee3da7138e5be10000000a114084/frameset.htm
Hope it helps.
Regards

Unable to find, Business Content Extractors for PS Module in RSA5

Hi All,
I'm unable to find the standard Business Content Extractors for PS module in RSA5.
Like : 0CO_OM_WBS_1, 0CO_OM_WBS_2, 0CO_OM_WBS_6, 0CO_OM_WBS_8.
Is anything to be installed?
Sorry.. these datasources are present in different module ' Overhead Projects '.
Apologies.
Thank you,
Ketan Zare
Edited by: ketan zare on Jan 6, 2011 9:37 AM

Hi Ketan,
Check these DatasSource. Might be of some use.
0CO_OM_NAE_1                      Network Activity Element: Costs
0CO_OM_NAE_2                      Delta extraction: Activity Elements Actual costs
0CO_OM_NAE_3                      Network Activity Element: Commitmt Line Items
0CO_OM_NTW_1                      Network plan: Costs
0CO_OM_NTW_2                      Delta Extraction: Networks Actual Costs
0CO_OM_NTW_3                      Network Header: Commitmt Line Items
0CO_OM_NWA_1                      Network Activity: Costs
0CO_OM_NWA_2                      Delta extraction: Netw. Activity Actual Costs
0CO_OM_NWA_3                      Network Activity: Commitmt Line Items
0CO_OM_WBS_1                      WBS elements: Costs
0CO_OM_WBS_2                      WBS elements: Budget
0CO_OM_WBS_3                      WBS elements: Overall plan
0CO_OM_WBS_4                      WBS elements: Statistical key figures
0CO_OM_WBS_5                      WBS Elements: Selections
0CO_OM_WBS_6                      WBS Elements: Actual Costs Using Delta Extraction
0CO_OM_WBS_7                      WBS Elements: Commitment Line Items
0CO_OM_WBS_8                      WBS Elements: Budget Line Items
Roy

Business content extractors for FI-TR

Hello all,
I´ve got a requirement to extract data for FI-TR and the specific area is called "Liquidity Planner".
Someone told me that there is an especific standard extractor for this, but I can´t find it in business content.
Could anybody tell me where I could find it?
Thanks in advance.
Carmen

I can find anything extracting from this table; to find standard datasource go to http://help.sap.com/ and serch with the namo of the table; than, on the right side there are the object finded; choose datasource and look if are right for your use.
Hope it help.
Regards

How to activate business content extractor for masterdata in ECC 6.0?

Hi Experts,
I have a small problem with the extracttor 0PS_RESPNO_TEXT in ECC 6.0?
If i try to open it in RSA2 / RSA6, it says that active version not available. When i check in the developement system, i have it as modified version.
For this problem, I hope activating this in Development and transporting to Prodction should fix.
As far as i know, activation of sap delivered extractors can be done through SBIW or RSA5. But i have not done this before.
Can anybody please help me with step by step procedure to activate this and also what are the precautions and checks that need to be preformed?
Thanks & Regards,
Asrar Ahamed MA

It depends on which BW environment has an RFC connection to the ECC environment you're activating the DataSource in. Typically, environments are paired, similar (but not always) like the depiction below:
ECC Development <-> BW Development
ECC QA <-> BW QA
ECC Production <-> BW Production
Best Practices suggest that a DataSource be activated and put on a transport in the ECC Development environment. Upon activation of the DataSource in ECC Development, replication of the DataSource in the BW Development environment can take place and Best Practices suggest putting the DataSource on a transport in BW. As the ECC transport is promoted throughout the ECC landscape, the BW transport is promoted throughout the BW landscape in order to keep them in sync.
So, if the envrionment that you've just activated the DataSource has an RFC connection to your BW Production environment, you can replicate in BW Production and if that's your standard practice, then that's the way your should do it. It's typically, however, not considered a Best Practice to be able to create, update or delete in a production environment.

Business Content Extractors for Inbound Deliveries (again!!!)

Dear all,
although we had the same question already in january, but as there was no solution at all, I have to ask the question how I'm able to extract <b>in</b>bound deliveries to BW. They are stored in LIKP/LIPS, but somehow the standard extractor 2LIS_12_* filter the corresponding document types.
Thanks for your help,
Andreas

Hi Andreas,
Have you tried by using R/3 LIS Structures (those named SXXX). You can try checking if you have anyone that is useful or you can create a new one and see in R/3 if it gets the information you need. Maybe you'll need help of an SD consultant. The transaction used to create those structures is MC21.
Then you will need to create the datasource by using transaction LBW0.
Hope this helps.
Regards,
Diego Lombardini

How to enhace business content extractor for cube in production

Hi All,
I want to run report based on 0MATERIAL on two cubes 0PCA_C01 and ZCOPC_C08. I dont have 0MATERIAL in cube 0PCA_C01.
Both of the cubes are in production. I am trying to enhance the data source 0EC_PCA_1 (for cube 0PCA_C01) to bring in 0MATERIAL.
> Is this the right way to do it?
If it is then, do i need to write the code in funciton module after appending the 0MATERIAL fields to the
data source. does any body have the code or plz help me step by step to write the code in CMOD....which tables should i go to get the 0MATERIAL.
> Most importantly, does enhancing the datasource 0EC_PCA_1 with omaterial affect the omaterial in the datasource for my second cube (can the same infoobject be in two data sources..bcoz master data is common for all cubes)....
I want to do this right....as both the cubes are in production.....plz help me..
Plz address any issues like data loss bcoz of enhancing datasource in production or something like that
thanks in advance,
> useful inputs will be rewarded

Hi Aravind,
You need to have a foreign key relationship with the base data to material to bring material no as a transaction data. There has to be a link from where you can extract the data. FIrst you see if this link is available in any other ods in BW itself. For example, if you have the vendor details in your cube, see if you can get the material from the AP ods. this depends on your implementation.
If you do not drop the cube load, how will this value be updated to the old data. Assuming you are doing deltas, the new records coming in will have this data filled but the data that already sxisted will not have this data. So, I think you will need to drop the load.
I know the amount of data could be huge but if you have to get the data from R/3 (this is if the data/link i mentioned above is not available in BW), you have to enhance the data source. In this case, you can not avoid datasource enhancement.
You can create a Zmaterial and load it from 0material. This will not help you. By doing this, you will be creating another master data. Even if you include this master data zmaterial in your cube, since you can not map it in the update rules, it will not help you. See if you can lookup this value from some other ODS.
Hope this helps.
Thanks and Regards
Subray Hegde

Delta Enabled Business Content Extractors and Safety Intervals

Is there a transaction/table from where I can check the safety intervals of Business Content extractors for example 2LIS_13_VDITM. If I created a Z copy of an extractor is there a way of changing this value? Thanks

There are two fundamentally different extractor types:
1. Que, which is updated at time of transaction
2. Delta based on incremental field on transaction
LIS extractors are type 1 and CO extractors and generic data sources are type 2.
Type 1 is more advanced as it handles the change directly. Type 1 handles complex data scenarios where type 2 is better for simple scenarios. Learn more i BW350

Business content extractors

Hi All,
Why is it suggested to use business content extractors when compared to custom generated extractors? performance ?? if yes, how does it affect...
can anyone please explain??
Thanks in advance.
--Monica

Not really for performance, but because the Business content are predefinited into real scenario of business.
In many case to define a complete scenario (example inventory management or CRM activity...) without BI content you must define houndreds of objects and connect them to the object of source system.
With BI contect (and extractors) you can start with a great part of your object already defined. (after I think you need to define your custom object).
Second the standard extractor will be mantained from SAP to be coerent to the SAP application (inventory management, CRM, ...)
Are these the main reasons to suggest the Business content extractors.
Regards,
Sergio

Business content Extractors and customer generated extractors

Hi Gurus,
I have following doubts on Extractors can u please clarify the following
1) what is the difference betwwen Business content Extractors and customer generated extractors?
2)why FI-GL and COPA are called as customer generated extractors ?
3)what is the difference between FI and Fi-sl and why FI-SL comes under customer generated extractors Extractors why not FI ??
Regards,
Nagarjun.

Hi,
You will go for Business Content extractor when the Customer requirement match with the content extractor delivered by SAP, other wise you will customize or create a Generic Extractor.
Check the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/42/c9bd342fdf1368e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/content.htm
i am not sure abt the customer generated extractors

Find an R/3 table in a Business-Content extractor

Hi all,
Is there any web site or place I can go, type the name of an R/3 table in, and find if that table exists in a Business Content extractor?
Thanks.
Dave

Hi Dave,
I don't know about any website providing info abt DS, but I know how to find out the extractor,
Check Table ROOSOURCE (TCode SE16).
If field EXMETHOD = V (Transparent Table or DB View), name of datasource can be searched with field EXTRACTOR containing the table or view name.
In SE 11 you can process the u201Cwhere usedu201D function for a table to determine the views related to it and then search for them.
Hope this anwer your query.
Regards,
Praveen Prayag

Business Content Extractor and Customized one

Hi,
What should be the decision criteria for deciding whether to use Business Content Extractors or a Customized one?

Hi Subash Soni..
First u Check with U r Functional consultant.. and Decide weather Those Fields are available in Business Content.. in Saphelp.com u can check all Queries..datasources..Cubes.. etc..Go through them throughly and come to One Conclusion..
if they are matching u r reqirement .then Go for Generic data sources..
if u Dont know how to Do Generic Exrection send u r email i will send the Screen Shots.. Step By Step. then u wil;l get Clear Idea.
Cheers
Purushotttam.
[email protected]

Business content extractor

Hello ,
I want to implement any(Business content cubes or DSO) of BI side by using LO extraction R/3 side
Could you please suggest me which datasource and which BC cubes or DSO should I use so that I can successfully implement the Business content extractor scenario.
Kindly let me know.
Thanks,
Sonu

Hi,
Not sure of your question..but still u can find all the business content related stuff in help.sap.com.
here is the link-
link: [http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm]
Hope it helps.
regards,
Rajendra

How to find business content explaination for SD, MM master data

Dear Expert,
       It might be stupid question:
       when I following BI Content help linkage: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm , I only can see transaction BI content data source. But I'm also wanna see the master data BI content data source explaination, e.g. 0CUST_SALES_ATTR, 0Material_Attr, 0Vendor_Attr.
      For example, I wanna check master data BI content data source: 0CUST_SALES_ATTR,   I goto BI content help page -- > Customer Relationship Management --> ERP Analytics --> Enterprise Sales and Distribution --> DataSources
      There is only transaction data source available.
Anyone can help me, thanks in advance.

Hi Jie,
Please check these links for SD,MM business content.
http://help.sap.com/saphelp_nw70/helpdata/en/90/d4f33b949b6b31e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/c5/bbe737a294946fe10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
Regards,

Using SAP Content Server for SAP E-Recruitment

Hi SAP Experts,
We are presently implementing SAP E-Recruitment using BSP services, We are successfully runnig with Whole E-recruitng cycle when we use SAP system DB as storgae for External Candidtes' Documents.
But, Our Client wants to have SAP Content Server to store all documents uploaded by External/Internal Candidates becuase client is worrying that if SAP system DB holds such huge data base of Resumes, it may slow down the performance of SAP System.
So, We need inputs from you suggesting whether is it feasible to use SAP Content server for SAP E-Recruitment Implementation. SAP no where suggests to Content server. So, we are in deliema to go for content server or not. If it is feasible to use Content server, pls provide me proper links or documents for reference.
Please give your valuable inputs,
Thanks & Regards,
Sudheer Kumar P

Hi Sudheer,
We are considering the same option. We are concerned about performance after all these documents are uploaded too. Did you install a content server? How did it go and was it difficult to set up with e-rec?
Thanks
Shane

Business Content Extractor for SAP Controlling ?

Similar Messages

Maybe you are looking for