Business Event Appraisal - Not showing in PA30

Hi All,
We are implementing TEM on SAP 5.0 and replaced the old appraisal system with new appraisal system.
I have prepared the Appraisal for Business Event, by selecting Attendee as appraiser and Business Event as Apraisee, the problem I am encountering here is after the preparation the document is not shown in any of the following areas in PA30 for infotype 25.
1) Appraisal where Apraiser
2) Objective setting & Appraisal(Open)
But the Appraisal templates which are created under Personnel Appraisal(in PHAP_CATALOG), is shown but not the Appraisal templates which are created under SAP Learning Solution(in PHAP_CATALOG).
Is there any configuration inorder to get this done?
Any help in this regard is highly appreciated.
Thanks
Ramakrishna Ramadurgam

Lincoln,
Can you be precise, I mean which Integration settings your asking me to look into?
One thing I noticed while debugging the code, it is getting Add On Application as 'PA', and passing this parameter to get the Personel Appraisal templates, in case if I modify as 'PD' in the debugging mode, it is fetching the Business Event Appraisal along with Personel Appraisal. Is there any setting for this to have PD passed in to the Add on Application variable.
Thanks
Ramakrishna
Thanks
Ramakrishna Ramadurgam

Similar Messages

Business Event Appraisal in Training and event management

Hi
I am facing issue releated to Business Event Appraisal Functionality in ESS. I have maintained value as blank in field HAP00 REPLA switch.
We have created I View of transacion PV7I in ESS. When i am selecting "APPRAISAL" button for attended event , i can select appraisal form from appraisal form list. On next screen i don't get Appraisal Form where i have to give feedback on different criteria's. I get Rating column and four buttons: Save, Check data, back, Complete.
When i am executing PV7i through R3 then it's working properly. Why it is not working properly in ESS. Kindly help me ?
Other issue..... :
My client needs INSTRCUCTOR feedback functionality means feedback for instructors by participants for particular event. How we can configure in the system for TEM module not for LSO.
KINDLY help me ...
Thanks and Best Regards
Puneet

Good Day !
Unfortunately the appraisal services (my_appraisals, my_app_create, my_appraisalsm) have not been migrated for the use with integrated ITS.
Please review SAP notes 870126 and 771196
Note:
Since the appraisal services (My_appraisals, My_app_create) have not
been migrated, you can no longer use the appraisal function from the
services PV7I and PV8I with the integrated ITS.
At the same time I am afraid the succession product is not an option
for you as the TEM functionality is not integrated with the new
appraisal functionality of 'Performance Management'. Performance
Management only offers an integration with the succession product of
TEM, i.e. LSO (Learning Solution).
Hope this information helps you.
Best Regards
Chetan

Training & Event Management - Business event appraisal

Dear all,
Wish you all a very Happy new year.
I hve two questions.
1. For e.g. there is one trainer who has conducted many training program in an org and business event appraisal has been performed where there is criteria to capture instructor information. Then how I can get a report for that trainer only. There is one selection criteria in the report of business event appraisal where I can select the instructor(appraisee) id. But it is not working.
2. When there are more than one instructor in one business event, then how attendee appraisal and business event appraisal are done?
3. In training & event mgt is it possible to perform periodic appraisal?
Thanks,
Have a happy weekend.
Daniel

Hi Daniel,
There is no SAP standard report on Trainer wise attendance history for this purpose you have to define the Adhoc query.
When there are more than one instructor in one business event it is a tough scenario to have attendee appraisal .
In TEM it is possible to have periodic Appraisals.
Warm Regards,
Kapil Kaushal

To restrict appraisers for Business Event appraisal

Hi All,
When i perform a Business Event appraisal, i need to restrict the appraisers to only those who have attended the training.
i.e. Appraisee : Business Event
Appraiser : Participants of the training.
When i click on F4 for appraisers, i need to restrict the entire list to participants who have attended the training. I have created a BADI implementation for HRHAP00_TMPL_RESTR. But this BADI is Add On Dependent . I have given the filter for the implementation as PA . But internally when function module
HRHAP_HEAD_APPRAISEE_GET_LIST is called, it has a parameter add_on_application which is always empty. So BADI implementation is not triggered due to filter value add_on_application.
Please suggest how should i proceed.
Regards,
Vidya

I know this is answered already to some degree but I can offer another alternative - that is to use function module 'RH_READ_INFTY_TABDATA'
regards,
Paul

Business Event Appraisal Form in New Appraisal System

Hi,
I have created Business Event Appraisal Form in New Appraisal System. I have done Appraisals for one Business Event by an attendee.
Where can see this Appraisal Document of Business Event and do any change if required. Or from we can delete this documents of Business Event Appraisal.
I have tried tcode appchange but there only Personnel Appraisal templates are visible.
Samriddhi

Hi,
If you are using a template created by using the Objective Setting and Appraisals componet you can view and maintain forms filled in by employees via Transaction phap_admin_pa.
Br,
Art

My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?

My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?

I found this tip from a 2011 discussion on the same topic.
Open iCal and backup or export your entries. Make a note of the fie name and location, you're going to need them in a minute. Once your backup/export is completed, close the iCal application.
Open Finder and remove everything inside the "Username/Library/Calendars" folder. For instance, if your username is "Joe", then move everything inside the "Joe/Library/Calendars" folder.
Open the iSync application. It's located in the "/Applications/" folder. Once iSync is opened, go into the iSync Preferences (iSync -> Preferences) and push/click the "Reset Sync History" button. Then, close the iSync application.
Re-Open the iCal application and Import (File -> Import) a new calendar. When prompted, use your notes from Step #1 to select the file your created earlier. Once completed, close the iCal application (you should have all of your calendar entries back.)
Open the iTunes application and connect your Apple iPhone to the computer.
Within the Advanced section of the Info tab for the Apple iPhone, check the box the overwrites/replaces the Calendar data on the Apple iPhone.
Click the Apple/Sync button. New, modified and deleted entries should now be syncing correctly.
That's it! You should be all set and iTunes, iCal and our Apple iPhone should all be playing nicely as friends again. We've used the exact method to repair our own Apple iPhone at least once... maybe even twice.

Photo events do not show correctly in my iPhone

Photo events do not show correctly in my iPhone. I have 21 events in my iPhoto but they appear in many different groups in my iPhone.

Mine too. Anyone have a clue how to fix this?

Yosemite Calendar - All day events are not showing

I have been using Apple Calendar for quite some time but after I upgraded to Yosemite All day events does not show in the calendar any more. Other events in my calendar is showing.
Environment:
1: I'm on Macbook Pro Retina, running Yosemite 10.10.1
2: Calendar is version 8.0 (2026)
3: I am using Google Calendar, added as account to Calendar
Problem/Bug:
This has been working fine on Maverick until this upgrade and I think it is a bug in Calendar.
1. I tried to add an all day event from Calendar, using my Google account calendar
2. Event is saved, but once saved it isn't shown in Calendar.
3. When I login to my Google account calendar, the event I created just created is shown nicely there!
I then tried adding a new calendar using my iCloud account, but same thing happened:
1. I tried to add an all day event from Calendar, using my iCloud account calendar
2. Event is saved, but once saved it isn't shown in Calendar
3. I once again try, this time by logging into my iCloud account, the event I created just created is shown!
This is really weird and a major issue as all-day events are kind of important to see when you are planning and scheduling meetings.
One additional thing, I'm not sure if it is related, I have Time zone support turned on as I am working across multiple time zones.
Anyone else that have encountered this?
Thanks in advance.
// Per

I have the same proble. In all views all day events don't show up. If I search for the event, there is a result but it does not appear in the calendar.

I imported photos but the event does not show

I imported photos today, it shows up under "Last Import" but the event does not show under "Events", how do I fix this?

What version of iPhoto are you running? Also is your profile correct?
In the Events mode set the View ➙ Sort option to By Date ➙ Descending so that the newer events are at the top of the window.
OT

TEM-Attendee & Business Event Appraisal

Hi All,
We are using SAP 5.0 and implementing TEM, when we try to create appraisal using T-code PV34(Attendee Appraisal), PV33(Business Appraisal) we are not routed to Generate To-Do List screen, instead it is going to a screen where we need to select the Appraiser and Appraiser mannually, which is quite un usual. It will remain same even if I go through Business Event Menu or Attendance Menu.
Any help in this regard is hightly appreciated.
Thanks
Ramakrishna Ramadurgam

Hi.
I have now the some problem. When I run tcode PV33/PV34 the list of the appraisal templates contain not only the temlates for business events and attendees but also for employees.
Did you solve the problem?
If yes, please give me some hints.
Thanks a lot.

Business Events Data Not Dequeuing

Hi ,
We would like to capture a few business events in oracle BOM and PO that are of interest to us. In order to do this,
we deploy oracle SOA composite with BEPL in the Oracle Fusion Middleware Control. The oracle SOA composite is configured for a particular outbound business event. It should listens on a specific queue WF_BPEL_Q or WF_BPEL_QTAB and de-queues the messages from that Oracle Queue or Oracle AQ Table. In jDeveloper 11g we created a SOA project with oracle applications adapter partner link and a BPEL Process with a receive acvity.
Specifically we are trying to capture the business outbound event oracle.apps.bom.component.modified just to get the event data in this receive.
Partner link configuration: We added the database connection to the oracle EBS instance. Tested it and we
succeded. Chose ANY_SCHEMA in partner link configuration.
We ensured that the JNDI Name here( eis/Apps/Apps ) match the JNDI name provided in the weblogic-->Deployments--
OracleAppsAdapter -->Configuration --> Outbound Connection Pools. For this outbound resource pool, Connection factory interface was javax.resource.cci.ConnectionFactory. Property name xADataSourceName was mapped to JNDI name of the configured JDBC datasource in the weblogic. When we created the connection pool. We tested and it worked fine. This data source had the connection pool configured to the oracle applications schema with APPS user.
After adding the partner link with the above configuration, we added a receive. We deployed this configuration to the middleware. We went to the oracle EBS modified a BOM component and we expected to having running BPEL instances against the deloyed composite. However, the problem is we are not having any running instance for the composite.
We found that there are entries in the view AQ$WF_BPEL_QTAB with an ENQ_TIME and ENQ_TIMESTAMP but with no DEQ_TIME or DEQ_TIMESTAMP. The ENQ_TIMESTAMP corresponds to the time we modified BOM in oracle BOM forms/Designer and MSG_STATE is READY
The data is being written in WF_BPEL_QTAB for the BOM changes but not getting dequeued by oracle applications adapter/composites deployed in soa server.
Please help me it quite urgent.
Is there anything we are missing on EBS side to be activited for the events to be dequeued
Any Help is appreciated.
Abhinav
Edited by: Abhinav on Jul 6, 2012 10:08 AM

Hi
I am able to dequeue the data using manual event testing button. BPEL instance are being created now.
But now no records are being inserted in WF_BPEL_QTAB if i change any Oracle BOM component using Oracle EBS which was working till yesterday.
In morning there were more than 100 records in WF_BPEL_QTAB as i have tested so many time changing bom component. I used this script
DECLARE
*     po dbms_aqadm.aq$_purge_options_t;*
BEGIN
po.block := FALSE;
DBMS_AQADM.PURGE_QUEUE_TABLE(
queue_table     => 'WF_BPEL_QTAB',
purge_condition => NULL,
purge_options   => po);
END;
after that Records are not gettingin WF_BPEL_QTAB when BOM Changes in Oracle EBS
Problem Description
we need to listen to the outbound business events of Oracle EBS for BOM/PO modules .
we have created a subscription for the oracle.apps.bom.component.modified by using Oracle Apps Adapter in SOA Suite.
1.
When we are testing oracle.apps.bom.component.modified from(Business Events--Events ---TestBusiness Events) by giving
dummy event key , send date, and xml payload and then click on Rainse in Java.
Then a two records are being created in WF_BPEL_QTAB table and are getting polled by Oracle Apps adapter and two BPEL Instances
are being created in SOA Suite showing the dummy payload which we entered while doing Business Event testing sigle time only.
No record is being created in WF_BPEL_QTAB of oracle EBS if we hit Raise in PL/SQL. tab while doing manual event testing.
2.
If we open Oracle BOM form(Responsibilty-Bills of Material -Bills -Bills of Material SV1) and change the component and save it.
No record entry/data is being created in WF_BPEL_QTAB of Oracle EBS .
Why there is no record entry being created when we change any component from Oracle BOM Form.
Edited by: Abhinav on Jul 6, 2012 2:38 PM

When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard and not iSync.

I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Iphoto keeps freezing up and events do not show photos, missing photos, constant crashes

I have a recurring issue that is causing major headaches. It involves iPhoto (9.4.3 the latest version currently) and I noticed that photos and videos I had imported seemed to be missing. I started looking deeper and there were photos and specifically videos that I just could not find. I had synced them from my iphone via a cable sync. What is odd is I found some of them in an event farther in on my events list but that is when more probalems started occuring. iPhoto froze up on me while I was working with the photos. Now when I open iPhoto I have 3 events that have photos and videos in them but the event do not have a visible photo, instead they show a grey icon with palm trees on it. If I go inside one of these events I initially see photos and videos that I took but if I try to work with them, view them, move them, or split them iPhoto becomes unresponsive and I have to force quit or wait for it to crash. This is frustrating because I can't really use iphoto lately it always seems to crash and I don't know all the causes for that. I also feel bummed because I don't know if these photos will be lost or if some of the other photos are lost. I don't know what to do. I tried verifying my disk and permissions with DU and fixed a few issues there but that did not do anything to reslove this issue.

For finding images be sure your sort is set correctly - view manu ==> sort events
For the crashes backup your iPhoto library, depress teh option and command keys, launch iPhoto an drebuild your database
LN

LSO: Business Event Appraisal

Hi,
We have already implemented LSO.Now we are planning to configure Appraisal for a Business Event.
Please do share any docs related to the configuration
Thanks in advance.
Regards,
Deb

Hi Deb,
As you have completed implementing LSO, can you share some documentation & the process for the same?
Really apprciate your time.
rlshravan at gmail dot com
SKR

All Day Events ( banner events ) will not show in iCal and Web Cal

I have iCal Server working for the most part. I am having issues with the Web Calendar not showing the all day events that are made in iCal on that group calendar. Non-All Day events show on both the iCal on the client computer and on the Web Calendar. Also events can be added and edited by multiple users.
If I make and all day event on the Web Calendar, it does not show up on the iCal client. If I make an all day event on the iCal client it does not show in the Web Calendar.
I made a banner event on the Webcalendar. One user could see the event in his iCal, I could not. He changed the status to "All Day Event" then the event disappeared from the Web Calendar, and showed up in my iCal.

Same problem here! Apple should really get their act together if they are serious about groupware and their server software; all-day events are a crucial part of a calendaring system!
I wonder if Apple actually use their own software? I can't imagine that they'd let this one go on unsolved for this long
JDT

Business Event Appraisal - Not showing in PA30

Similar Messages

Maybe you are looking for