Business Graphics, GeoMap and BIApplicationFrame in ABAP WD

Hello everyone,
I just started working with ABAP WD and saw in the documentation that it was possible to integrate BI reports and graphics in a Web Dynpro application. I would like to know if there are any concrete examples available of ABAP WD apps integrating Business Graphics, GeoMap or BIApplicationFrame? Although the documentation provides some information about the different properties related to these UI elements, an example is always a good way to get a better understanding of the actual implementation.
Thanks in advance for your help,
Christian

Hi Christian,
you can find examples in the system in SE80. For GeoMap choose Web-Dynpro-Component /Intf WDR_TEST_EVENTS with the view GEO_MAP, for BusinessGraphics have a look at WDR_TEST_EVENTS again, this time all the views called BG_*. There's also an example in component WDR_TEST_UI_ELEMENTS.
Regards, Heidi

Similar Messages

Business Graphics, Gantt, and how to

Hello Everyone,
I am trying to use the UI Element Business Graphics in order to create a Gantt chart. I am having trouble trying to determine how to set up the context and mapping for this. I am basically trying to create a Gantt chart that is similar to a Team Calendar in that entries on the vertical axis could have more than one entry on the line. I have looked at the example WDA programs that specify a Gantt chart, but none of them are doing a Gantt chart similar to a team calendar.
I currently have my context as follows.
Series (Node)
     Points (Node of Series)
          Values (Node of Points)
               Start Time (Attribute of Values)
                End Time (Attribute of Values)
     Description (Attribute of Series - This contains entries on the vertical axis. In a Team Calendar...this would be name)
     Label (Attribute of Series)
Is this the proper context set up for a Gantt chart similar to a team calendar? If this is correct, then does someone also have recommendations on how to bind the attributes in the "Values" node since this is a nested node?
One last question, does anyone know of any WDA program (standard) that is doing a Gantt chart similar to this? It would be helpful to look at an example.
Thank you for your help.
Scott

Hi Lekha,
Yes, I have looked at both of those. Both of those examples utilize the Gantt UI element and not the Business Graphics UI element and Gantt chart as I mentioned. The Gantt UI element in those two examples seem to be a bit overkill for what I am trying to accomplish; however, I welome any feedback on utilizing the Gantt UI element. This problem I saw with that (other than it being too much for what I am trying to do) is how/what must be done to get your data formated properly in order to bind it to the Gantt UI Element.
Scott

Business Graphics(IGS) Application Killing memory

How much memory should kill (In the Server)for a Webdynpro ABAP business graphics application(IGS).
Someone developed one Business Graphics application and it is taking 130305127KB memory.Basis is saying for this Server is not behaving properly.
I want to know do you have any idea regarding this

http://help.sap.com/saphelp_nw70/helpdata/en/46/8cb295e6390e9ce10000000a155369/frameset.htm
Armin

Webinar: Introduction to Web Dynpro Business Graphics

SAP NetWeaver Know-How Network Webinar:
Introduction to Web Dynpro Business Graphics
Wednesday 15 September 2004
11 a.m. EDT
On Wednesday 15 September, Jeff Gebo hosts the webinar titled Introduction to Web Dynpro Business Graphics as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Jeff describes his webinar presentation:
Learn how to bring your Web Dynpro Applications to life with business graphics. Business graphics can be generated by Internet Graphics Services (IGS) which is included in the 6.40 SAP Web AS. Get an overview of the IGS architecture, the Web Dynpro Business Graphics API, and the features of the IGS. Join this webinar and then go and impress your boss with the incredible business graphics that you will be able to create!"
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 15 September 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 15 September 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720158.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hi,
Go thru..
What is Webdynpro?
What is Web Dynpro?
Webdynpro Sample Applications and Tutorials
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d
SAP WebAs Samples And tutorials
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7d646a6c-0501-0010-b480-bf47b8673143 [original link is broken]
Basis Webdynpro tutorials....
http://help.sap.com/saphelp_erp2005/helpdata/en/15/0d4f21c17c8044af4868130e9fea07/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/1fc0bdb1cdd34f9a11d5321eba5ebc/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/d08342a7d30d53e10000000a155106/frameset.htm
Web Dynpro Sample Applications and Tutorials:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d [original link is broken]
http://searchsap.techtarget.com/searchSAP/downloads/SAPPRESS.pdf
Check the following thread u can get lot of materials,
WeB Dynpro Documents
Refer these linkshttps://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/web%20dynpro%20tutorial%20and%20sample%20applications.faq
Why WebDynpro ?
Why WebDynpro ?
Why webdynpro and not BSP or JSP?
Why webdynpro and not BSP or JSP?BSP to WEB Dynpro
BSP to WEB Dynpro
Benifits of using Webdynpro Benifits of using
Webdynpro
Java vs. ABAP WEbDynpro Java vs.
WebDynpro ABAP
regarding Java related webdynpro
Regarding Java related Web Dynpro vs. Struts - a few questions
Web Dynpro vs. Struts - a few What kind of applications are being developed with Web Dynpro?
What kind of applications are being developed with Web Dynpro?
http://www.sappro.com/downloads/OptionComparison.pdf
Hop this will helpful for u..
Urs GS

Business Graphics API in WEBAS J2EE

Hi,
i have a business graphic integrated into my webdynpro application. I checked the api documentation for business graphics and found out, how to change the type of the business graphic and the number of dimensions programmatically.
On the API, i cannot find out any further possibilities of modifing the chart programmatically. I wonder about this, because the business graphic UI - element in NetWeaver Developer studio provides much more configuration possibilities on charts.
For example, i would like to use the averagre functions or adapt the number of labels on the chart axis. But all dynamically.
Has anyone experience, with such advanced business graphics features and nows if it is somehow possible to get to theses features by using the NetWeaver API?
Thank you very much in advance.
Regards
Christoph

As I understand, your user management is through database, so when a user is created in your application, the parameters pass through the Action Handler -> service class-> DAO. So a better way would be write an additional class with the user management implementation of BO with a constructor or a method which would take the required user creation parameters and call it in the service class just under the user creation method of your DAO.
As the user in your system passes some information from the front end, the same can be used to create user in BO.

Business Graphics: Speedometer chart: Change Maximum value on runtime

Hi Skilled,
We faced a little problem in our project. We use Business Graphics component and Speedometer chart on the View and we should change maximum value of the graphics on runtime.
I could easily change the maximum on design time in Chart Designer -> Axis -> Maximum Value, but I haven't found a way to change it on runtime.
Are there any known ways to change the value on runtime?
Best Regards, Dmitry

Hi,
by calling setDirectCustomizing you can provide customizing XML at runtime.
Create your own customizing XML where you define the maximum value and call this method.
You can also use the SAP Chart Designer from SDNs download area for creating the XML (just to get an idea how the XML has look like in your application).
Regards, Kai

Test of Web Dynpro Event Handling : GeoMap business graphics

Hy guru's, i have this problem: on Test of Web Dynpro Event Handling page i tried to open the GeoMap web dynpro on Business Graphics section but i received this error:
The URL http://.../sap/bc/webdynpro/sap/wdr_test_events/ was not called due to an error.
Note
The following error text was processed in the system BI7 : Exception condition "COMMUNICATION_ERROR" raised.
The error occurred on the application server bi7-saplab_BI7_08 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_GIS_VIEW~UPDATE of program CL_GIS_VIEW_IGS===============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LBUSINESS_GRAPHICS======CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BI7 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server bi7-saplab_BI7_08 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server bi7-saplab_BI7_08 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: AMARAVIGLIA -l: E -s: BI7 -i: bi7-saplab_BI7_08 -w: 0 -d: 20071119 -t: 232916 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Could you help me?
Thank's a lot
Sincerely yours
Andrea Maraviglia

Hi,
did you install the IGS (see the <a href="http://help.sap.com/saphelp_nw70/helpdata/en/37/268841a79f1609e10000000a155106/frameset.htm">documentation</a>) and check if SAP note 1108034 helps?
Regards, Heidi

Business Graphics in WebDynpro - bundle chart and data sheet

Hi experts,
I have a simple chart with stacked columns in a WD4A application.
At the bottom of the chart I'd like to display the values of each column.
I know that it works in ABAP reports (CL_CU_DATA_SHEET).
Does anybody know how to do the same in a WebDynpro?
Thanks in advance!
Frank

> Hi Frank ,
> Yes It is possible in webDynpro ABAP now how
> ?
> Please see Demo Component
> WDR_TEST_EVENTS.In this see view starting with
> BG*(Business Graphics ) .Run them see which will fit
> best to your problem and follow it .
> Another thing you can see Business Chart
> assocaited with ALV coloumn values . Please refer to
> Package SALV_WD_DEMOand component
> salv_wd_demo_table_toolbr.In Dropdown in ALV
> you will find option like Table and Graphics.
> See it .It show chart but below ALV .I m not sure do
> u need something like this only ?
>
> Hope this will help you .
>
> Cheers
> Parry
> 
Hi Parry,
thank you very much for your answer!
I cheked all examples in WDR_TEST_EVENTS but couldn't find any that fits.
The class <a href="http://help.sap.com/saphelp_nw2004s/helpdata/de/70/8fa0375b5dd003e10000009b38f8cf/frameset.htm">cl_cu_data_sheet</a> does exactly what I need, but only with SAP GUI.
I still hope that it will be possible to do the same in a WebDynpro.
Best regards
Frank

Business Graphics and Data Tables

Hi All,
I have a SAPGUI application which uses the SAP Chart to display a pretty simple column chart with a data table underneath.
With the SAPGUI Chart Options this is set as so: [Chart Options |http://www.assetcentric.com.au/images/chart-options.png]
The result is a chart looking like so:
[Chart Example|http://www.assetcentric.com.au/images/chart-example.png]
Does anybody know whether this is possible to achieve with the IGS from WebDynpro?
Regards
Andrew

Hi,
If you are using webdynpro for ABAP then we cna use the Business Graphics UI element where we have differenet chart optins( bar, pie, lines etc) to have the graphs.
BG in Webdynpro -
http://help.sap.com/saphelp_nw70/helpdata/EN/ed/258841a79f1609e10000000a155106/content.htm
For WD4Java we need the separate IGS server to render the graphs, but in WD4A we dont need it. we can design webdynpro applicaitons in SE80 and can run the applciations in browser direclty.
we can use the data from BAPI by making a service call to that BAPI, and bind the tables to this BG UI element to display.
Regards
Lekha

Business Graphics and Adobe Interactive Form

Hi Friends,
I generated charts in webdynpro using business graphics.
Now, I need put this charts into a Adobe Form using Interactive Form Component. Is that possible? How can I do this?
Thanks,
Cristian

Hi Cristian Teles,
YOu can use the Business graphics even in Adobe forms. In the Adobe Designer you can find the various graphical UI elements. Please go through them.
Structure of the Chart Designer
The Chart Designer is divided into three areas:
·        The graphics preview
The area on the left-hand side in which the business graphic is displayed. This area is used to display a preview of the Customizing settings. Changes to these settings are displayed immediately in the graphics preview, which lets you implement necessary changes in the business graphic display instantly.
·        Overview of graphical elements
The area in the upper-right side that contains the list of graphical elements. For a detailed description and list of all graphical elements, see SAP NetWeaver ® Application Platform (SAP Web Application Server) ® ABAP Technology ® UI Technology ® Frontend Services.
Each graphical element, in turn, has one or more properties. To change a property, select a chart element either from the chart window or by name in the chart element window. The properties of the chart element are then displayed, and you can edit and change the values of the properties.
·        The property list
The properties are listed in the area below the graphical elements. To change a property, select a graphical element either with the mouse in the graphics preview or from the overview of graphical elements. The properties of the graphical element are then displayed. You can change the values of these properties.
http://help.sap.com/saphelp_nw70/helpdata/EN/0a/2f77b0cbb8914eb071b411991f6019/frameset.htm
Thanks
Suresh

New to Business Graphics in WD ABAP

Hi all,
I am new to Business Graphics in WD ABAP. I have already go through the WDR_TEST_EVETS. But I don't get it clearly. Is there any other document or any earlier thread to understand BG.
Please suggst.
Thanks
Sanket sethi

Hi,
First try to create a table with some values in it and bind it to the node.
When you create the BG there are thow things- Series and Category.
Category is the X Axis and Series is the Y-Axis.
Bind the respective properties to the node defined above.
Select the type of graph as Chart/Line type using the Chart editor.
When right cliecked on the BG you can see the Chart settings there you set the Chart type, X and Y axis.
Create a Business Graphic, under that create Category for X axis and Series fror Y-axis that dispaly values from a table.
Bind the Category to the context node->attribute and also the bindthe values to the respective Series and to the BG UI element.
Please check out these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ca932ebc-0901-0010-68a0-b4dd81a4bf81
Business Graphics and Data Tables
Regards,
Lekha

Business Graphics and WebEnterprise

I have a two part question.
First, what is the best way to create business graphics such as line, bar,
and point graphs? OLE to Excel, OCX, some third party commercial graphics
library such as Brahma Software's Beacon?
Second, once I have a business graphic what is the best way to display these
graphics on a web page? A number of Forte field widgets such as ellipse,
polyline, and point do not have a corresponding HTML element and therefore
the Forte WebEnterprise WindowConverter class cannot convert these windows.
Is there a way to save Forte images as BMP/JPG images?
Thanks,
Douglas Wheeler (mailto:[email protected])
BORN Information Services, Inc. (http://www.born.com)
Tel: 612.404.4379 Fax: 621.404.4441
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

exactly!
many ways to do this
1.U can use WDCopyService(Source ,Target) here Source : return node of model data
Target : Your temporary value node which bound to BG.
Note : Each time when ever model data get updated(CRUD) u have to call this node.
2. Use Mapping type node and bind it to BG ui element exe : when we create any node It has 4 options one of them is Mapping select this and provide the model node
(mapping of node with model node is replica of the content there in model node, here u don't have to worry about updated content since its replica and get changed eveytime when model operations is performed)
Best Regards
Satish Kumar

I am a sole proprietor business owner (work from home graphic designer) and I have a customer who wants to pay me via Apple pay. Can I accept her transaction? How do I get that rolling?

I am a sole proprietor business owner (work from home graphic designer) and I have a customer who wants to pay me via Apple pay. Can I accept her transaction? How do I get that rolling?

Apple Pay: Merchants FAQ - Apple Support

Business Graphics - Chart Type - Columns, and Simple Scatter Type

Hi,
I am interested to know more about Business Graphics Specially Chart types Columns and
Scatter type ( and Time Scatter). I am facing problem in producing X and Y Co-ordinate values for Charts. (Specially Date Values in X Axis.). I tried with Time Scatter type and need more documents.
Expecting Good Documents and suggestions.
Thanks,
Vinod V

Hi
Check this link
http://help.sap.com/saphelp_nwmobile71/helpdata/en/86/243f403f0a9354e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nwmobile71/helpdata/en/0b/79553b066d9414e10000000a114084/frameset.htm
https://help.sap.com/saphelp_nw04/helpdata/en/0c/95c83956852b51e10000000a114084/frameset.htm
thanks

Business Graphics: Link between SeriesList and Categories

Hello everyone,
I have a Business Graphics with a Category Subelement and a SeriesList with a Value inserted.
The Series List is linked to a node, so my series are dinamically created during runtime. My problem is that the number of categories i have are allways different from the number of series, and categories is a discret set of values known at design time. How do i link each category to a set of values from the SeriesList ?
 Thank you in advance,
 Nuno Santos

Hi Nuno,
Check this link you will get the code.
http://help.sap.com/saphelp_nw04/helpdata/en/e5/08b6eb35637a44830b9e6df22987aa/frameset.htm
IPrivateGanttTestView.ICategoryNode catNode = wdContext.nodeCategory();
 for (int catIndex = 0; catIndex < catLabels.length; ++catIndex)
 IPrivateGanttTestView.ICategoryElement
 catElement = catNode.createCategoryElement();
 catNode.addElement(catElement);
 catElement.setDescription(catLabels[catIndex]);
 // loop over series
 IPrivateGanttTestView.ISeriesNode seriesNode = wdContext.nodeSeries();
 for (int seriesIndex = 0; seriesIndex < timeValues.length; ++seriesIndex)
 IPrivateGanttTestView.ISeriesElement
 seriesElement = seriesNode.createSeriesElement();
 seriesNode.addElement(seriesElement);
 // set series attributes (...)
 IPrivateGanttTestView.IPointNode pointNode = seriesElement.nodePoint();
 // loop over points
 for (int pointIndex = 0; pointIndex < timeValues[seriesIndex].length;
 ++pointIndex)
 IPrivateGanttTestView.IPointElement
 pointElement = pointNode.createPointElement();
 pointNode.addElement(pointElement);
 pointElement.setStartValue(timeValues[seriesIndex][pointIndex][0]);
 pointElement.setEndValue(timeValues[seriesIndex][pointIndex][1]);
 pointElement.setCuId(pointCustomizing[seriesIndex][pointIndex]);
 pointElement.setLabel(pointLabels[seriesIndex][pointIndex]);
Regards,
Mithu

Business Graphics, GeoMap and BIApplicationFrame in ABAP WD

Similar Messages

Maybe you are looking for