Business Package: company suggestion system

Hello all,
I wonder if there is a Business Package for a company suggestion system??
Thanks for your help.
Best Regards,
Sandra N.

Please check the below  wiki.
https://wiki.sdn.sap.com/wiki/display/EP/TodownloadPortalrelatedBusiness+packages
Also, refer to this thread.
ESS/MSS business package
Raghu

Similar Messages

  • Business packages for Project systems

    i,
    I wanted to know if there is a business package for Project systems which include transactions like CJ20N, CN33, CN41N, DP81,VA23, VA25. I checked in SDN Portal content portfolio and found there is a BP for Projects 5.3 and BP for Project self service. I checked out the content which is present but not sure whether it suits my requirements.
    Appreciate if any one can point to the right Business package.
    Regards
    PN

    Hi,
    Chk out this link, it points to Project Self Service.
    http://help.sap.com/erp2005_ehp_01/helpdata/en/3f/a197422836c76ae10000000a155106/content.htm
    You can find the prerequisites & the configuration required in the above link.
    For this Business Package you have to install the following software components:
    SAP PSS 600
    BP ERP05 PROJ SELF-SERV 1.0
    Regards,
    Abhishek

  • How to see the business packages in my system..

    Hi,
    I have installed ECC6.0 with ABAP+JAVA componets on windows 2003 server. I wanted to see what Business packages installed in my system. Can you Please help me how to check the business packages means path.
    Thanks for you responses in advance.
    Regards,
    Bhaskar.T

    You can check in following ways:
    1. System Information --> All components
    2. You can also look for portal content for each business packages in Platform Based Content under Content provided by SAP.
    Hope this helps.

  • Transport process for configured ESS/MSS business packages to QA system

    Hello Gurus!!
        We have configured ESS and MSS business packages on NW 2004s portal DEV system. Everything is working fine now. Could anyone please explain me the process of transporting the configured business package content to the QA System. I know the general transport procedure for transporting content from one system to another system.
    But wanted to make sure what it is like for transporting the business packages, for which lot of backend configurations have been done.
    Any help in this regard will greatly be appreciated with valuable SDN points.
    Thanks,
    ~LB

    Hello All-
       Could anybody share some thoughts on how to transport business package content from one system of the landscape to another system of the same landscape?
    All valuable answers wil be highly appreciated with good SDN points.
    This is urgent!!
    Thanks much,
    ~LB

  • Remove Business Package The portal system

    Hi, I need remove 1 business packages in the portal, how? remove BP in the JSPM?
    Please help,
    Thanks.

    Hi,
    You can remove the BP, Log on onto the portal as administrator
    Go to Content Administration > Portal Content
    Open the folder  Portal Content > Content administrator-> portal content.
    and also remove PCD objects and any par files.
    hope this helps.
    Thanks,
    George

  • Business packages on 1 J2EE and connecting to multiple R/3 clients?

    Hi,
    We have an installation with on R/3 side one client on 1 SAP system; this system is ERP2004. On this environment we have the ESS business packages installed (on J2EE).
    At this moment we are splitting up our environment and we are considering either completely separeted system per company or just one system with a separate client per company.
    If we do a complete split of the system, I don't see any major issues as everything will be split.
    Gor the 2nd option: If we want to install the business package on 1 system but for multple clients, I don't find any documenation on tyhe possibilities of this option.
    Any idea if this is possible and if so what are the limitations, pitfalls etc?
    Best Regards,
    Michel

    Hi Rune,
    For the new R/3 Client that you want to add...create an SLD entry for the Technical System(if the Tech system is already there, add the new client to the Tech System)...
    Create a new bussiness sytem for this new client that we added, make sure that the Logical system name is updated correctly as maintained in the R/3 Client.
    Import the new business sytem to the Integration Directory, Create RFC/IDOC comm. channels for this bussiness systems.
    Now if you want to add this as a recipient to an existing scenario...Open the receiver Determination for that scenario and add this bussiness system as a receiver.. maintain the interface determination and receiver agreement for this addition and that should be it...
    Thanks,
    Renjith

  • I could not able to see Imported Business Package

    Hi
    I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
    I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
    I did not deleted the Standard BP from PCD/Migrated Content
    After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
    I could not able to see the Customized BP in PCD….. , Whether that Standard BP should be deleted before Importing
    What is the Default location it stores after importing?
    Plz help me to solve this issue its very urgent.
    Regards

    Hi Michael
    For Example In CRM BP there are set of Roles in that i took only Lead Manager Role and Stored that in my folder xyz as Deltalink and i also copied dependent object pertaining to that Role as Delta link.
    In Transport Package i added all the dependent object and aswell the Role of Lead Management to that Package.
    Before Exporting the Transport Package there is a option called (Include all objects on which the exported objects depend) i checked this option and Id of dependent objects i mensioned as ex: com.xyz
    After doing this i transported my BP

  • CRM Business package for EP 7.4 system

    Hi,
    Need to apply CRM Buisness package for CRM 7.0-ABAP stack on a Portal 7.4 system.
    Please guide me for suitable business packages and respective download link of the same.
    Can we apply CRM 5.0 business package on the portal system for my scenario.
    Thanks in advance

    Hi Daniel,
    You can browse to below path under Support packages
    My Company's Application Components" My Company's Software" SAP CRM" SAP CRM 7.0 / NW7.01
    Look for CRM portal content which is relevant for your Portal version .
    Hope this helps.
    Regards,
    Deepak Kori

  • CFolders System for Business Package Buyers

    I am very new in KM and cFolders area.
    Currently we have already installed EP+EPC on Netweaver04s and trying to apply
    business package Buyers.
    The installation guide of Business package said that we need to have SM59 RFC
    connection to cFolder system.
    Anyway, as I have little knowledge about cFolder system. I don't know how
    I can navigate to that and do the initial testing.
    Kindly advise.

    Dear G,
    As I see your back-end system has 2 app servers... to cofigure the portal iViews to use both app servers you need to define that in the portal system object that is defined to connect to the backend system... You should look if the system object you use for connecting to srm is of the type: "SAP_R3_LoadBalancing"
    See also: http://help.sap.com/saphelp_nw70/helpdata/EN/1f/bddf3d48b05d5ae10000000a11405a/frameset.htm
    In addition because you are talking about ITS you could configure a WebDispatcher in front of your Backend SRM system...
    Good Luck,
    Benjamin Houttuin

  • Multiple backend systems for business package ESS/MSS

    Hi,
    I would like to know whether there is a smart solution for connecting the business package ESS/MSS with multiple backend systems (up to 10 systems).
    I am aware of the possibility using parameter "sap-wd-arfc-useSys", but this implies, that content needs to be duplicated n-times in order to be able to maintain the Jco destination suffix.
    Any hint, also for custom built solutions are very welcome!
    Best regards,
    Johannes

    Johannes
    There is some problem with the link
    See this.
    Connecting multiple SAP Systems
    Thread name is 'Connecting multiple SAP Systems'
    Krishna Murthy

  • Business Package, Alias and different systems....

    Hello everybody,
    I have got some questions concerning the mentioned topics.
    I have a business package (Internal Sales Repr.) and it is already installed.
    <b>1.</b> On each iView in the business package there is set an ID for a SAP System, for example a BW. Is this the SID or is it the ALIAS I defined for a system to access the BW?
    <b>2.</b> There is a machine with enterprise portal, R/3 and BW running under the same SID. They all have different clients. (thank god it is a test system and not productive)
    Do I need to create different systems in the portal to access to BW and R/3 because of the different clients?
    Is it generally possible to implement SSO form the portal to the Backend, if they have the same SID?
    <b>3.</b> The ID from 1. is not set as a deltalink. Is it defined by default or it is set when I install the business package?
    Wow, a lot of stuff. But I hope you can help me
    thanks
    christian

    Hi Christian,
    Two different system has to be created in portal. In the system object you have to set the connector properties, user admin, user mapping and the WAS for BW and ITS for R/3 properties.
    You have to create the system alias and the test the connection.
    For import and export of the certificates. you have to use Strustsso2 transaction.
    Regards
    Arun

  • System Configuration for CRM Business Package 4.0-60.2 in Portal

    Hi All,
    We have configured CRM Business Package(4.0-60.2) on EP6 SP11.
    Also created the SAP_CRM system with required fields.
    But I am confused with where do I have to specify the ISA related parameters?
    Should I create new systems with the aliases specified in CRM Business Package Admin guide(i.e.according to Web Entry Point names)For e.g. ISA_B2B,ISA_B2R,SHOP_ADMIN,USER_ADMIN etc. or I have to specify this in SAP_CRM system itself?
    Your Help will be appreciated.....
    Thanks and regards,
    Amol.

    Hello James,
    Thanks for the prompt reply...
    But my question is whether I have to make these changes in SAP_CRM system itself or should i create new system namely ISA_B2B,SHOP_ADMIN,ISA_B2R etc.
    With regards,
    Amol.
    Note : If you have already configured the CRM business package, please send me the documentation or the screen-shots of the system defined in portal on my e-mail id([email protected])

  • Business Package for Transport Management System & Travel Mangement System

    Hi,
    Is there any <b>Business package</b> available for <b>"Transport Management System" and "Travel Mangement System"</b>?
    Please provide some link, if it is available.
    Thanks in advance.
    Manish

    Hi Manish,
       travel management is part of the ESS business package.  As far as transport management, if you are talking about TMS capabilities for moving object in the landscape, go to https://www.sdn.sap.com/irj/sdn/developerareas/contentportfolio and search for "transport"  You will find a thirdparty package for this.
    Good luck.
    John

  • Business Package for Travel Mangement System

    Hi All,
    Is there any Business package available for "Travel Mangement System"?
    Sb told that "Travel management" is part of the ESS business package.
    Please where can i find it?
    Please provide some link, if it is available.
    Thanks in advance.
    Ari

    Hi,
    Travel Management in ESS uses Travel module in SAP ECC  5.0/6.0.Is this what you are looking at .. ?
    In this case travel should be configured in SAP ECC system and is made available in the portal as one module in  ESS.
    To get ESS business package
    Support Packages and Patches -> " SAP Application Components" - >SAP ERP" ->SAP ERP 2005"-> Entry by Component" ->SAP XSS (Self Services)
    ESS 600 and PCUI_GP 600.
    Support Packages and Patches -> " SAP Application Components" - >SAP ERP" ->SAP ERP 2005"-> Entry by Component" ->Portal Content
    BP ERP05 ESS 1.0
    Regards
    Bharathwaj

  • Importing Business Package more than once for different systems

    Hi,
    We have a demo portal (EP6 SP12) connecting to various SAP systems. We want to use the same Business Package for two different systems. Is there any way to import a Business Package a second time with a different system alias, without overwriting the first import, so we can point it to a different system?
    Many thanks,
    Jane

    Prakash - I had thought of this, but I would then have to recreate the pages, worksets and roles manually. Also some BPs contain hundreds of iviews so it would be very time consuming to manually edit the system alias on each one.
    Karsten - At the moment, we're interested in the ESS and MSS Business Packages but I would also like to know generally, since I'm sure in the future this will apply to other BPs for us.
    Many thanks,
    Jane

Maybe you are looking for