Business Package ESS with more than one backend

Hi,
i need to implement a business package (ESS or MSS) two time in one portal system to access two backends. The portal landscape will completely be in the SAP standard, so we only want to implement a two system landscape (DEV and PROD) for the portal. On ERP side we have a three system landscape. So the aim is to implement the business package in the DEV portal two times and access both, the DEV and the QAS ERP system.
Are there any informations concerning this or has someone already performed this?
It think the steps are:
- Copy of the BP in PCD
- New Alias for the second system and change the alias at all PCD object in the copy
- Copy of the used JCo Destinations and adding them as a parameter to all iviews (the sap-wd-arfc-useSys=SAP_R3_HumanResourcesXYZ)
What do you think?
Kind regards,
Christian

I don't think you can do that for Jco Destinations.
You might create the copies of JCo Destinations.But you might need to change the new Jco names in the standard ESS/MSS Development Components which is quite difficult..
May be you can make JCo Destinations to point to Dev initially and then change it to quality for testing

Similar Messages

  • Reversing Landed Cost document with more than one vendor

    Hi Experts,
    Reversing Landed Cost document with more than one vendor:
    My client can reverse a landed cost document with One Vendor, but cannot with multiple vendors. I have also tested this in 8.8 PL10. Here is a brief description:
    Created Landed cost by selecting 2 vendors in the Vendor field.
    After you picked one vendor, you go to the vendor code/name again then choose another vendor you
    need, once you picked, the system will ask you whether you want to delete the previous data, then
    you say no, after then you will see the vendor name became "different vendors" and code be "********"
    (on the vendor tab: you will see two vendors)
    To Reverse Landed Cost we do the following with Landed Cost documents that only have one vendor:
    I can copy from the Landed Cost document (on the right-bottom corner) while creating new one with
    zero amount to reverse, which is ok; but for multiple vendors, the list of vendors onlyshows one of
    the vendors for Good Receipts & Landed Cost.
    Cannot copy from a Landed Cost document wioth more than one vendor to reverse this Landed Cost.
    To be albe to copy from a previously created Landed Cost document (with multiple vendors) as you
    can with one vendor to reverse the transaction.
    Can this functionality be added to future versions?

    Take a look at business area and groupings in they payment program settings...
    I am not sure what version you are on but the following link for 4.7 should provide some valuable information...
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9be64455711d182b40000e829fbfe/frameset.htm
    Grouping Open Items and Individual Payments
    Wherever possible, the payment program will always group items together for payment.
    The payment program can only group together open items for payment if the open items in an account have the same:
    1. Currency
    2. Payment method in the item
    3. Bank in the item
    4. Contents of the grouping fields (if a grouping key is specified in the customer or vendor master record)
    You can also pay open items from different company codes together, as well as customer and vendor line items.
    Items in an account are not grouped together if you:
    1. Make payments separately per business area. This procedure entails separate payments being created per business area.
    2. Want to make individual payments
    Items in which a payment method is specified are not grouped with items in which no payment method is specified.
    You define the required grouping key in the IMG for Financial Accounting under Accounts Receivable and Accounts Payable -> Business Transactions -> Outgoing Payments -> Automatic Outgoing Payments -> Payment Method/Bank Selection for Payment Program -> Define Payment Groupings.
    In our system, if the business area is the same, there will be one ZP document with one line with a posting key of 25. Otherwise there will be many individual 25 posting key lines with.

  • Slider with more than one thumb

    Hi,
    does anybody know a slider with more than one thumb?
    The JSlider-class only provides one thumb, but I need more thumbs to displace.
    That why I posted the last question: I found one in the web but when I call the constructor, I get that error.
    Thank you all
    Katharina

    Hi,
    I also tried MThumbSlider, a.k.a. CMThumbSlider (C for
    Cougaar?), the slider with more knobs. (keywords: slider,
    knob, knobs, thumb, thumbs, more, two, three.)
    I downloaded the code from the link mentioned below,
    run the example and it worked just fine. When I tried
    to subclass the slider to add tooltips I got an exception
    from the loader:
    UIDefaults.getUI() failed: no ComponentUI class for:...
    The slider has its own package. Its constructor
    (indirectly) calls the following utility function,
    passing itself as an argument, just before calling
    JSlider.updateUI. The latter then calls UIManager.getUI,
    which fails with the exception mentioned above.
      public static void setUIName(JComponent c) {
        String key = c.getUIClassID();
        String uiClassName = (String)UIManager.get(key);
        if (uiClassName == null) {
          String componentName   = c.getClass().getName();
          int index = componentName.lastIndexOf(".") +1;
          StringBuffer sb = new StringBuffer();
          sb.append( componentName.substring(0, index) );
          String lookAndFeelName = UIManager.getLookAndFeel().getName();
          if (lookAndFeelName.startsWith("CDE/")) {
            lookAndFeelName = lookAndFeelName.substring(4,lookAndFeelName.length());
          sb.append( lookAndFeelName );
          sb.append( key );
          UIManager.put(key, sb.toString());
      }When the slider is subclassed outside of the package,
    the above results, e.g., in
    UIManager.put("MThumbSliderUI", "MetalMThumbSliderUI");thus the package name is lost. To correct such behaviour
    I changed the substring with the package name, including
    the last dot. The same goes for function createUI.
    There is another thread on this subject:
    http://forum.java.sun.com/thread.jsp?forum=57&thread=348245
    The link were I found the code is
    http://www2.gol.com/users/tame/swing/examples/JSliderExamples1.html

  • Sample code with more than one ResultSet in JSP

    Hi
    Can anyone give me sample JSP code using crystal reports JRC with more than one ResultSets which works, since mine always seem to be giving error .
    Thank you
    Selvi
    RCAgent5 detected an exception: Cannot modify a read-only collection.
         at com.crystaldecisions.reports.common.e.a.clear(Unknown Source)

    You can access the JRC samples from SDN in the Business Objects Portal.  The link to them can be found [here.|https://smpdl.sap-ag.de/~sapidp/012002523100006008982008E/crxi_r2_jrc_web_smpl.zip]  There is a sample called jrc_resultset_datasource that shows how to pass a result set to a report; you can use this and modify it to allow another result set to be passed in.
    As a note, if you are having issues and believe it is your code, start with the sample and take small steps when adding new functionality so that you can determine where things go wrong.

  • Package Admin_Optimize - Selecting more than one app

    BPC 5.1 SP3
    Is there an issue with running the admin_optimize package with multiple apps (separated with commas)? This has worked in versions prior to 5.1 SP3.
    I'm getting an "error" when I try to run the admin_optimize (out-of-box) package with more than one application specified. The error message says "entry is not valid....available options are: Consolidation".
    This is my input at the "What application would you like to optimize" prompt:
    consolidation,rate,finance

    Thanks, James...but, I wasn't able to get this to work. Maybe I'm missing something. The PROMPT text is below; I've removed the second comma from line 2 before %APP_LIST% as you mentioned. Then Saved changes, and tried to re-run. I get an error saying invalid application. Any ideas?
    'DEBUG(ON)
    PROMPT(TEXT,%Application%,"What application would you like to optimize? Please use a comma to specify a list of applicatoins.",%APP_LIST%)
    PROMPT(RADIOBUTTON,%OPTIMIZEOPTION%,"What type of optimization would you like to perform? ",2,{{"Lite","Incremental","Full"}},{{"4","2","1"}})
    PROMPT(RADIOBUTTON,%COMPRESSDATABASE%,"Do you want to compress the database?(Only applicable when performing a lite or full optimization).",0,{{"Yes","No"}},{{"1","0"}})
    PROMPT(TEXT,%OptimizeMinWBCount% ,"Set a standard write-back size to start optimization",,)
    TASK(Admin_Optimize,APPSET,%APPSET%)
    TASK(Admin_Optimize,APP,%APP%)
    TASK(Admin_Optimize,USERID,%USER%)
    TASK(Admin_Optimize,PROCESSMODE,2)
    TASK(Admin_Optimize,OptimizeMinWBCount,%OptimizeMinWBCount%)
    TASK(ADMIN_OPTIMIZE,OPTIMIZEOPTION,%OPTIMIZEOPTION%)
    TASK(Admin_Optimize,COMPRESSDATABASE,%COMPRESSDATABASE%)
    TASK(Admin_Optimize,APPLICATIONLIST,%Application%)

  • CLM for more than one backend

    Hi experts
    I would like to know if can I implement CLM integrated to more than one backend, there are some restriction?
    Thanks
    Nilson

    Hi Nilson
    Master data from multiple backends (ERP) can be replicated to CLM system. But the integration to multiple ERP system has to happen through SRM.
    CLM --->   Central Contracts in SRM  ----> Multiple backend ERP systems.
    So far SAP has not come out with the feature of connecting multiple backend ERP with CLM, i believe.
    Regards
    K

  • Is there a stereo bluetooth headset that can pair with more than one device at a time?

    Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
    Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
    The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
    I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
    Appreciate any and all input. My Googling has returned no results.
    Rick

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • Can I use a magic trackpad with more than one Mac at a time?

    I am attempting to pair a MTP with a second MacBook Pro.  So far I can't get system preferences to find the MTP.
    I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
    The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac.  To do this, you first remove the existing pairing and then pair the trackpad again'.
    Can anyone advise, please?
    If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
    Thanks

    Yes, your keyboard, mouse or trackpad can be paired with multiple Macs.  You can even have multiple keyboards, mice or trackpads paired with one Mac.  The caveat is that the device can only be connected to one Mac at a time.  The device can't be paired or connected with a Mac while it's currently connected to another.
    Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other.  The device will connect with the first available paired Mac and then unavailable to the second.   If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on.   I do this with a keyboard from my iMac to a Mac Mini in another room.
    Captfred

  • Error while running spatial queries on a table with more than one geometry.

    Hello,
    I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
    When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
    We are running Oracle Standard 11.1.0.7.0.
    Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
    What this script does:
    1. Create table object1 with two geometry columns, geom1, geom2.
    2. Create metadata (projected coordinate system).
    3. Insert a row.
    4. Create spacial indices on both columns.
    5. Run a SDO_RELATE query on one column. Everything is fine.
    6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
    7. Clean.
    CREATE TABLE object1
    id NUMBER PRIMARY KEY,
    geom1 SDO_GEOMETRY,
    geom2 SDO_GEOMETRY
    INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
    VALUES
    'OBJECT1',
    'GEOM1',
    2180,
    SDO_DIM_ARRAY
    SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
    SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
    INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
    VALUES
    'OBJECT1',
    'GEOM2',
    2180,
    SDO_DIM_ARRAY
    SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
    SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
    INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
    CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
    CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
    SELECT *
    FROM object1
    WHERE
    SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
    SELECT *
    FROM object1
    WHERE
    SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
    SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
    DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
    DROP INDEX object1_geom1_sidx;
    DROP INDEX object1_geom2_sidx;
    DROP TABLE object1;
    Thanks for help.

    This error appears in GeoServer and SQLPLUS.
    I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
    Anyone knows what could cause an error like this "End of TNS data channel"?

  • Send email from SAP with more than one attachment

    Hi all,
    How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
    Besr regards,
    Munur

    Hi,
    I use :
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    the main problem with different attachemts is to genereate the packing_list.
    the packing list is a kind of description of the data table... where ist the start  of an image, end, size...
    "Creation of the entry for the compressed attachment
            objpack-transf_bin = 'X'.                    " it could be an image
            objpack-head_num = lv_head_num_count .  " inital 1 each att  add 1
            objpack-head_start = 1.                     " fix
            objpack-body_start = gv_startnum.    " table with attachments  1. line one
            objpack-body_num = tab_lines.          " how many lines are in the table of attachment
            objpack-doc_size = tab_lines * 255.   " size of the  attachment...
           objpack-doc_type = lv_typ . " 'JPG'.
            objpack-obj_name = 'ATTACHMENT'.
            objpack-obj_descr = lv_stripped_name  " name of the JPG
       APPEND objpack.
       APPEND LINES OF lt_goscontent TO gt_maildata.  " data Table...
    bestreg
    robert

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

    When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • Can you sign in with more than one apple id on an iPad?

    Can you sign in with more than one apple id on an iPad?

    Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

  • Why is all my icloud account linked with more than one apple id?

    why is my iphone 5 merged with more than one account?

    What do you mean by "merged with more than one account" and "linked with more than one Apple ID"?  What exactly are you seeing on your phone?

  • HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me.  Do I have to order and pay shipping for each one individually?

    Is there a way to place an order with more than one item at a time?  for example I am making a few books and having them all shipped to me.  Do I have to order each one separately and pay shipping each time?

    You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
    Regards
    Léonie

Maybe you are looking for