Business Partner number not assigned to ORG unit

hello colleagues,
I cretaed an Org Unit at the highest level, i have assigned Basic data, address data and i have assigned function and attribute, but when i save the Org unit,I am not getting the BP number,
can anyone tell me what could be reaosn for this, but normally whenever a new org unit is created
a BP has to be assigned to it right
please help me with this problem
regards
chandu

Hi Chandu,
To create a bp number & relationship for org unit follow the below process
==> SPRO
==> Customer Relationship Management
==> Master data
==> Business Partner
==> Integration Business Partner-Organization Management
==> Create Business Partner Initially
Click on Organisational Unit(s) and provide the input as 'ID' of the ORG and Execute
Click on the line and right click and select 'Start Repair'
If Bp is already existing, u wnat to build only relation ship follow the below process.
==> Use Tcode SE37
==> Use functional module as 'HR_OBJECTBUPA_INSERT' and Execute
==> Click on the value button and enter OT as 'O', OBJID as ID of the org BUPAGUID as
Businesspartner GUID and Execute
Regards,
PePe

Similar Messages

Business Area is not inheriting from Org.Unit or Cost Centre

Hi
Business area is assigned to Org.unit in IT1008, when I executing the action business area is not defaulting / Inheriting from Org.Management.
Any one could help me to solve this issue.
Thank you.
Bachi

It seems OM and PA are not integrated, are they?
RHINTE20 is the report can bring data from OM to PA.

Err while confrm Business partner does not exist (Notification E R1 201)

I am for the first time into CRM serv implementation.I have 2 issues. Please provide your valuable suggestions at the earliest.
I raised a serv order, released items, confirmed it and changed the status to complete. now when i try to raise an invoice, in billing due list, serv order num is showin up but not confirmation number. Billing relevance in item category for
service item in Serv order ---> Order related billing acc to order quantity
confirmation item category--> Transaction related billing after completion.
The reason i expect is that i have used a crm employee as employee responsible as HR is not yet in place. At the time of confirmation and data transfer to r/3 system is throwing a message that BP doesnot exist. Long text is as follows
"Business partner does not exist (Notification E R1 201)"
I am unable to trace out which BP is it unable to find. The Sold to i am using is on the other hand available in R/3.
1) Is service confirmation incomplete and hence is not appearing in Billing due list or is there any other reason?
2) How can i analyse which BP number is not avilable. i.e.. how can i check the contents of bdoc system is sending and because of which value of BP is the transfer getting stopped
Regards,
Kiran

Hi
The link is not working.
The contents of the message is as follows
follow all the following steps
Setting up Transfer of Employee (HR Master) from R/3 to CRM
1. Logical system XXX assigned to R/3 client XXX. Logical system YYY assigned to CRM client YYY view through SCC4
2. Create RFC Destination YYY for CRM client YYY in R/3 and
Server ID with user details and client YYY.
3. Transaction code SALE : Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Maintain Distribution Model and Distribute Views. (Direct transaction code : BD64)
Go to change mode and select Create Model view.
You get a popup. Fill in the details Technical name, short text and validity
Select Add message type from the application tool bar.
Fill in the following details
Model view : HRCRM
Sender logical system : XXX
Receiver logical system : YYY
Message type : HRMD_ABA
Note : Only this message type works for employee transfer.
4.Save the model. From the same screen select the distribution model and from the menu Environment  Generate partner profiles
Dont change anything in the next screen. Simply Execute.
4.Distribute the distribution model HRCRM
Select the distribution model. From the menu bar, Edit  Model View  Distribute
You get a dialog showing the receiver logical system. Execute.
You get a log Model view HRCRM has been created in target system YYY
5.Go to the CRM system and check up whether this model has been created.
Transaction code BD64
The model has got copied. No changes can be made in CRM
6. Generate partner profiles for the distribution model in CRM by selecting
Environment  Generate partner profiles.
In the next screen, do not make any changes and Execute.
Partner profiles can be seen in transaction WE20
Delta Download Settings
7. So far, the above settings will ensure the initial download. However for any changes / new employees to be transferred, i.e delta changes, changes pointers need to be activated.
In R/3, Transaction code SALE, Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Master Data Distribution  Replication of Modified Data  Activate Change Pointers Generally (BD61)
This activates change pointers globally for all message types.
8. In R/3, Transaction code SALE, Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Master Data Distribution  Replication of Modified Data  Activate Change Pointers for Message Types
Activate change pointer for message type HRMD_ABA
9. CRM : Number Assignments. Generally, there are 3 types of number assignments (also called switches) when business partners are created.
1 The system uses the number from the general internal interval of the number
range object BU_PARTNER
2 The system uses the number from a specific internal interval of the object
3 The number is transferred from HR and a prefix is added. In this case, a specific external interval, which must be defined as XX00000000 (upto
XX99999999), is used (where XX denotes any two letters).
The number range object for all switch positions is BU_PARTNER, with the interval depending on the switch value.
For switch value 1, the system uses the internal standard interval, otherwise for switch values 2 and 3 you must also create a grouping (transaction BUC2) for these intervals. For the system to be able to connect the grouping and the number range interval, the name of the grouping must be exactly the same as the name of the corresponding number range interval (the name of the grouping is contained in the first column of the table). If you select 3 (HRALX/PNUMB = 3) for the number assignment of busienss partners of the employee role, create HRALX/PSUBG switch manually in table T77S0.
In table T77S0, HRALX/ONUMB is used to set the number assignment for organizational units and HRALX/PNUMB is used to set the number assignment for employees.
Create a number range ZZ
Transaction code BUC2. Create a grouping of the same ID as that of the number range. Eg. Number range ID : ZZ and grouping ID should also be ZZ
In table T77S0, maintain the following combinations
HRALX-PNUMB = 2
HRALX-PSUBG = ZZ
10. Make the following customizing changes in CRM
Transaction code SM30 : Table T77S0
Group Sem Abbr Value Abbr
HRALX HRAC X Activate HR Integration with CRM
HRALX OBPON ON Activate integration between Business partners and Org Units
HRALX PBPON ON Integration between business partners and employees
HRALX OPROL BUP004 Role definition for org unit Business partner
HRALX PPROL BUP003 Role definition for Employee Business partner
HRALX ONUMB 1 Number range assignment for org units
HRALX PNUMB 2 Number range assignment for Employees
HRALX PSUBG ZZ Number range grouping only if PNUMB is not 1.
11. Create Employee Master in R/3. Employee master consists of Infotypes. The mandatory infotypes are Actions, Address, Personal data and Organizational Assignment. You can ignore the remaining. Click on next and dont save the other infotypes.
Transaction code : PA30
12. In R/3 Initial Download : SE38 RHALEINI
Plan version : 01
Object type : P Person (always)
Object ID : Employee ID eg. 1
Receiver Partner no. : YYY
Select further details
You get all the data transfer details
13. In CRM, transaction code PP01 View HR Master objects
You see that the employee 1 has got transferred. To see the corresponding business partner go to the infotype Relationships (the first row)
Screen 2 gives you the business partner ID in CRM
Regards
Rekha Dadwal

Shoppingcart business partner does not exist

Hi Gurus,
One shoppingcart is created and done the partial confirmation two months back.one month back User id has been deleted and recreated the same ID.So the user having two business partner id's.One is the old business partner and the another one is new business partner.Now the User is creating the partial qty confirmation second time,But he is getting the error message " Partner number 8000XXXX does not exist in the system".The Business partner number was assigned in the Good's Receipient field as old BP number.Because of this issue we could not able to do the Confirmation Centrally also....
Please suggest me what is the solution which we can provide for the user.
Regards,
Srinivas.

Thanks for Update...
Actually why we deleted the User is - Once shoppingcart is approved the manager,it is showing that shoppingcart approved completely and once again goto Inbox...the work item still showing in the Inbox ...so manager is getting the work item again and again.Because of this we deleted the User id and Recreated the same ID.At that moment the Issue was resolved...
but the problem is Process with the confirmation in SRM system not allowing .....
Finally we did the manual GR in Backend.....But the End user is not accepting the resolution......
Is there any chance to change the Goods receipient Business partner ID in the completed shopping cart.......
Please help me on this..........

Urgent: Business Partner assignment to Org Unit

Hi,
I have created a Organisational Unit and assigned positions to each unit.
However when I try to assign any busniess partner its giving error as below
<b>The required data changes consist of two parts:
1. Scheduling existing relationships
2. Creating a new relatonship
The existing releationship(s) was/were successfully scheduled, but the system could not create the new relationship.</b>
Is there any specific config required for the Org assignments, if so pls tell me.
Help me its very urgent.
Thanks in advance.
Regards,
Sheetal Hirde

HI,
And also check the following and maintain accordingly
BUPA SYNC ON BP: Integration (ON / OFF / CREATE)
HRALX HRAC X Activate HR Integration
HRALX OBPON ON Integration O-BP Activated
HRALX OBWIG X Ignore Business Partner Warnings
HRALX ONUMB 1 Business Partner Number Assignment (Org. Unit)
run the report Create Business Partner Initially(Tcode;CRM_OM_BP_INTEGRATE).
Regards,
Satish Mathala

Business Partner Number in Organizational Unit

Hi All,
I am Configuring Organizationla model in CRM 4.0, as we know the system automatically generates a BP of role type of Organizational Unit as soon as we save the Organizational Unit which we created.
But in my case Partner ID is generating but not Business Partner can you please advice me in this regard?
I have checked all the number ranges and all.everything is ok but i dont understand what is missing and where? This is Urgent plz.
It would be great help if you can spare some time in this regard.
Hopefully waiting for your reply at the earliest.
Thanks and warm regards,
Vali.

It should create a BP of type Org as soon as you add a organization in the Org model.
Go to Tx ppoma_crm (Maintain Org Model).
Create a Org and add other data like address and save it .
Exit the screen and open the org model again you would see the BP Number under the Business Partner column for the selected Org.You couls also see Code,ID,Valid from,Valid to columns for the organization.
Take the BP Number and open it through BP transaction.
Thanks,
Thirumala.

Business Partner Number for Org Model

Hi Experts
When we are maintain a Sales org Business Partner Number will automatically generated how it will generating let me what are the customizations for that
I have one scenario
Ex: I am taking number range from 10000 to 99999
We created 99999 customers now we want to maintain anther 10000 customers so how should is increase the number range in system 10000 to 99999 only available so how should I will maintain
Please tell me
I will be very happy to reward points.
Thanks and Regards
Kumar
Edited by: Kumar on Sep 24, 2008 12:48 PM

Hi,
The integration settings are maintained in the below path
Img -> Customer Relationship Management -> Master Data -> Business Partner -> Integration Business Partner-Organization Management -> Set Up Integration with Organizational Management
hopes this answers your query.
Regards
Vinod

BP number is missing for org units in org model

Hi Guys,
I have created org model in PPOCA_CRM and saved it CRM7.0. But BP numbers did not get generated for org units which I have created.
Can any one suggest me what is the reason and what needs to be done in order to get BP numbers for already created org units in PPOCA_ CRM or PPOMA_CRM.
Thanks for you help,
JM

Go to CRM IMG->Cross Application components->SAP Business partner->Business Partner->Number Ranges and Groupings->Define Groupings and Assign number ranges.
There check if any number range is defined with the "Int Std grouping" . If it is not define it.
and in SM30 for "T77S0" for entries HRALX/OSUBG assign a number range.

Business Partner Number - HRALX-HRAC problem

Hello,
I am trying to configure Service desk in Solution Manager 7.0
While creating Business partner through t-code ppoma_crm.
But after creating Business partner, there is no assignment of Business partner number to business partner.
I have check entry HRALX-HRAC in table T77S0, in transaction sm30,
For HRALX-HRAC flag is not set.
What should I do to set this Flag?
Should I set manually or there is any procedure for it???
Kindly guide regarding this.
Thanks,
Chandresh Pranami.

Dear Chandresh,
have you activated the BC sets for service desk?
You can the following
Go to the following IMG path: Customer Relationship Management -> Master Data -> Business Partner -> Integration Business Partner-Organization Management -> Set Up Integration with Organizational Management.
Find the entries starting with HRALX. You should have those entries:
HRLAX - HRAC with the value u2018X',
create this entry in the table and Save.
HRLAX-OBPON with the value u2018ON',
create this entry in the table and Save.
Regards
Prakhar

Business partner number Issue in Service Groups

Hi ,
In My Current Business process we are creating Manual Organizational Unit Service Groups, at the time of creation system should generate Business partner number with ROLE Organization.
Recently we are updated system windows to UNIX . from that release system not generating business partner number automatically in Organizational unit .
I have run the program HRALXSYNC to Synchronize organizational unit in background, then system generated business partner number but this number not visible under organizational unit beside objective id . Available under transaction BP .
And we are failed to find service group name under service groups result list..
Regards
Raju

Can any One help on this
Regards
Raju

Can Business Partner number and Vendor Number, Plant Numbe be same in SRM ?

Hi Experts,
We are configuring SRM7.0 with ECC6 ( Ehp4) having Classic Scenario .
I configured sandbox, and everything working fine.
I have one query. The Business Partner Number and the Vendor Code or Plant code are different. So while entewring the Location key in Shopping cart we need to enter BP code, by drilldown ( In drilldown we can see ECC Vendor Plant number).
Its no big problem,.
Can anyone suggest whether it is possible to have both Unique or exactly same , so no need to remeber both code or see in drilldown.
Thanks
NAP

Hi Narendra
Location - BP can be different only since plant assign always internal BP number only so BP number and plant number can not be same.
but Vendor you have two options .
External Number - if you were selected BP and Vendor number will be remain same.
Internal Number - if you were selected BP and Vendor number will be different.
visit BUCF tcode for Internal and External BP number configuration.
See our Mentor Ricardo detail explanations
http://wiki.sdn.sap.com/wiki/display/SRM/ECCPlantorLocationnumberisnotdisplayedinShoppingCart
All the associated parties which are used in the SRM environment (like location, recipient and supplier) are modelled as business partners.
Due to this fact the user interface displays the business partner numbers in a uniform manner, as the business partners are the technical representation of the involved parties.
In order to give the user a better idea which business partners are shown by the numbers, a little text is displayed next to the corresponding field (e.g. 11147 - Werk Hamburg).
When ERP plants are replicated to SRM system, plant numbers are converted into business partners and a new ID is assumed.
Muthuraman

Displaying Business Partner Number in IDOC status

I am trying to create a business partner using idoc CRMXIF_PARTNER_SAVE_M03 in we19. Idoc is getting created but does not display the business partner number in 53 status message.
When i check the in BP transaction using the last name it shows i.e. it created sucessfully but why the BP number not showing in IDOC.?

It should create a BP of type Org as soon as you add a organization in the Org model.
Go to Tx ppoma_crm (Maintain Org Model).
Create a Org and add other data like address and save it .
Exit the screen and open the org model again you would see the BP Number under the Business Partner column for the selected Org.You couls also see Code,ID,Valid from,Valid to columns for the organization.
Take the BP Number and open it through BP transaction.
Thanks,
Thirumala.

Change history of User for Business Partner Number attaching and removing

Hi Experts
Is there any t-code in SRM which will show change history of User for Business Partner Number attaching and removing.
Thanks--
Guru Prasad Dwivedi

Serene,
I am not too sure if anyone can DELETE a Payment Term linked to a BP. The system would not allow this. If at all a Payment term was deleted, I don't think it can be traced.
It is therefore very important to use Proper user authorization so that only people authorized to do certain things are doing it and not everyone.
Suda

Synchronization from vendor to business partner is not active?

Hi there
I am busy performing data migration of business partners and vendor accounts and have hit an issue on the last step of linking the uploaded BP to the uploaded Vendor.
On execution of the transaction FLBPC2 (Link Vendor to Business Partner), it issues the error "CVIV_UI015 Synchronization from vendor to business partner is not active" which I believe is a product error because:
1. I have configured BP to a new internal number range (and all other config requirements)
2. I have configured a new Vendor account group with an external number range which is a duplicate of 1. above
3. I have enabled BP to Vendor synchronisation in "Master Data Synchronisation" (from BP to VENDOR).
I have tested my configuration successfully by creating a business partner via transaction BP and extending him to a vendor in a company code perfectly (works like a charm).
My data migration process includes:
- Creating a business partner using BAPI BUSISB990/FSCREATEFROMDATA.
- Creating a vendor using the external number given above using a recording of FK01.
- Linking the two using a recording of transaction FLBPC2 (Link Vendor to Business Partner).
I am not trying to synchonise a business partner from vendor, but to synchronise the vendor via the business partner (which works using transaction BP) when the issue is received.
Any ideas as to why I cannot do the operation manually which works via automation and why the error is not appriate?
Regards
Joe

Good morning,
I had a similar problem and solved by disabling
the integration of the PI / XI of the PPO.
To make sure that the PPO is working properly.
You can check this setting by BUPA_CALL_FU transaction.
Checks if the items are BUPA_OUTBOUND_MAIN and BUPA_OUTBOUND_REL
integration of the disabled for PI / XI, according to the objects you need to be replicated.
If they are uncheck them and rerun your tests.
Use MDS_PPO2 the transaction log to check the copy of BP
to the Vendor.
I hope it helps, Good luck,

BDoc Error-Business partner is not a person

HI
We have a error in the BUPA_MAIN Bdoc for only one customer that "Business partner is not a person". What could be reason for this? How this can be rectified?
Thanks
Prince

Hello Varun,
If you want to have as contact Person for relationship XXXX as well organization , that could be an issue. Because in standard it is only forseen that Persons can be assigned as Contact Persons. There for you have to create a Z-Relationship type.
A Group can have a Contact PERSON, but no Contact ORGANIZATION. As stated in standard it is not possible to have an Organization as Contact Person.
thanks

Business Partner number not assigned to ORG unit

Similar Messages

Maybe you are looking for