Business Place & Section Code Field is missing in FB60// "Bus.place/sectn"

Hi Gurus,
I am working on ECC 5. I have done all the configuration for Extended Withholding tax.
While doing FB60, the field "Bus.place/sectn" are missing in the screen "Basic Data".
Can you please let me know how to get the field "Bus.place/sectn" in the "Basic Data" screen in FB60.
Thanks will assign points if useful.
Rgds
Prasad

Hi Prasad,
Please Impliment Note No.813103 for ECC 5 it is a Program Error i am 100% sure it will work.
Regards,
Manish

Similar Messages

  • Displaying Message in business place and Section code field in FB60 Tcode

    hii experts,
    I want to display a message 'Enter value in Business place and section code fields'
    if these fields are left empty under tcode FB60.
    I know that i hv to do modification in SAP Std program but i m not sure
    whether i should use User Exit / Enhancement for this. Plz help
    Regards,
    Apoorv Sharma

    Hi  Apoorv Sharma,
    Use the transaction CMOD, create a project and verify some of user-exit bellow can help you:
    F050S001   FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc seg
    F050S002   FIDCC1: Change IDoc/do not send                   
    F050S003   FIDCC2: Change IDoc/do not send                   
    F050S004   FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do no
    F050S005   FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI doc
    F050S006   FI Outgoing IDoc: Reset Clearing in FI Document   
    F050S007   FIDCCH Outbound: Influence on IDoc for Document Ch
    F180A001   Balance Sheet Adjustment                          
    FARC0002   Additional Checks for Archiving MM Vendor Master D
    RFAVIS01   Customer Exit for Changing Payment Advice Segment 
    RFEPOS00   Line item display: Checking of selection condition
    RFKORIEX   Automatic correspondence                          
    SAPLF051   Workflow for FI (pre-capture, release for payment)
    Try also the BAdIs and verify if it is the moment that you need:
    FI_HEADER_SUB_1300 - Screen Enhancement for Document Header SAPMF05A
    FBAS_CIN_MF05AFA0 - EWT - Downpayment Clearing - Tax transfer for CIN
    FI_RES_ITEM_CURRENCY - Document of Residual Item with Invoice Currency
    FBAS_CIN_MF05AFA0 - EWT - Downpayment Clearing - Tax transfer for CIN
    FVFZ - Replacement for Function Modules of Function Group FVFZ
    FI_FB08_SUBST_BUDAT - FB08: Check Posting Date for Reversal of FI Doc. with FB08
    Case there are some place that your validations are validates,  so implement your code  with messages kind  "E".
    Best Regards.
    Welinton Rocha

  • Section Code field in MIRO screen

    Hi,
    Do you know how to enter the section code in the MIRO screen please? I cannot see the field section code and/or business place in the screen. However, the Business place is populated in FI document from plant --> business place assignment. Whereas the section code that is required for a vendor invoice subject to withholding tax is not populated. And I cannot see the field either. Please could you help?
    I have activated a substitution to get this populated now. However, I would appreciate if you coudl help me get the field appearing on the MIRO screen. SHD0 is something that I tried to do. But, couldn't not get this field.
    Please help!

    hi,
    Thanks for quick response. However the OSS note 605046 asks us to define the section code for India in the table J_1I_SECCODE. That is what we did. Our patch level is 5 in ECC 5.00. Since we have around 40 Company codes that are already live and running, applying a patch at this time will be a disaster. Therefore, I am not sure, whether we have any other option or not. I will change the substitution rule I set up for automatic population of section code, complete the configuration you mentioned and try my luck again. If it works, then we will be fine. Otherwise, I will update you with what SAP come back with. I have raised one OSS message as well. Let's see their response too. I will update you with the result of testing after I complete the configuration changes that you mentioned.
    I will hold on to this message until then.
    Thank you,
    Subash Krishna

  • User defined Catalog type3 - Valuation Code field is missing

    Hi Quality Experts,
    SAP Version : SAP ECC 6.0
    I have craeted the user defined catalog type "S" coping the system defined catalog type "3".
    In sytem defined catalog type "3", in transaction code QS51, there are 15 fields.
    Where as user defined catalog type "S", for the same transaction code QS51,
    7 fields are hidden including the "Valuation Code" field.
    Hence the selection set can not be created.
    The details are given below.
    S.No     System defined Catalog Type "3".     User defined Catalog Type "S".     Remarks
    1     Code Grouop     Code Grouop     OK
    2     Code                      Code                     OK
    3     Short Text for Code     Short Text for Code     OK
    4     Long Text for Code     Long Text for Code     OK
    5     Valuation Code     MISSING                    THIS FIELD IS MISSING
    6     Quality Score     MISSING                    THIS FIELD IS MISSING
    7     Posting Propasal UD     MISSING                     THIS FIELD IS MISSING
    8     Long Term Char.     MISSING                      THIS FIELD IS MISSING
    9     Stock Screen Backgr. MISSING        THIS FIELD IS MISSING
    10     Follow up action     MISSING                  THIS FIELD IS MISSING
    11     Short Text      MISSING                      THIS FIELD IS MISSING
    12     Changed By     Changed By       OK
    13     Changed On     Changed On      OK
    14     Created By     Created By     OK
    15     Created On     Created On     OK
    Please do the needful.
    With Best Regards,
    Raghu Sharma

    Hi Anton,
    Thanks for your prompt reply.
    Can u please guide to create a user defined catalog of type 3 ?
    While creating the selection Set, I need all fields.
    With Best Regards,
    Raghu Sharma.

  • Business Place and Section Code Issues

    Dear Experts,
    I am using SAP IDES 4.7.
    For account type = K (Vendors), I have done WHT setting. Also through validations I have made Business Place and Section Field mandatory for the company code I am using.
    But the issue is the section code field BSEG-SECCO in not visible in any of the t.codes line F-43, FB60 or MIRO, so the validation is not working.
    Kindly help me how to make that field visible for all the transaction codes.
    Uttam.

    Please check if the following thread helps.
    Business Place & Section Code Field is missing in FB60// "Bus.place/sectn"
    Also, search this forum with keywords "business AND place AND section AND code AND FB60".  Make sure you choose ALL threads and not just the ones in the past 90 days (that is the default option that shows up!).  There are quite some threads/questions on this topic!!

  • Business Place in ECC 6.0....Awaiting for your reply.......

    Hello,
    While posting business transactions(WHT transactions) via TC: F-43, FB50 or FB60 system is not showing business place field. I went to OBC4 and check even there is no business place/section code field. How should i get activate BP/Section code field in F-43/FB60.
    Please guide me without using Validation / Subtitution
    Regards
    Krishna

    Hi,
    Business place and section code fileds come automatically for a vendor/customer.
    When you talk of F-43 screen, after you enter the posting key 31 for the vendor, these fields would come up.
    These would not come up automatically for a GL. And hence you dont find in FB50.
    You would again find the same in FB60 in header data (under basic data tab).
    Hope its clear..
    Caio
    Raghu

  • How to Update Business Place & Sec.Code Field in Posted Document

    Dear All,
    Pls suggest how to update Business Place & Section Code field in documents which are posted without entering Business Place & Section Code. Pls tell me how to achieve this without using Validations & Substitutions. Any table entries can be maintained for this? Kindly guide.
    Regards
    Abhijeet

    Hi,
         Thanks for sending the replay,
         I had already update the Material document through the J1INPP T. code. but it not use for update FI
         Document and i want to update Business Place & Section Code in FI document.
         Please suggest,
    Regards
    Abhijeet

  • Please insert Business Place and Section Code to proceed

    Hi
    I am getting following customised error "Please insert Business Place and Section Code to proceed" which is mainatined as validation while clearing the vendor through f-44 but when i see the document which has to be clear in which both business place and section code is entered properly. But when doing clreaing the section code field comes as blank where as business place is filled hence the above error is coming.
    I am surprised to see that in document both the fields are entered correctly where as in clearing its not showing section code.
    Thanks

    Hi Gaurav,
    I Suppose the validation is build on call up point : 2 (line item) so it will check the bussiness place and section code in every line items and triggers a error, The Previous suggestion of excluding the T.Code f-44 is good as I did the same thing in our project.
    Thanks & Regards
    Krishna Chaitanya

  • Business Place/Section code - TDS

    hai,
    In FB60 we are selecting Business Place/Section code for TDS purpose. Can we have this field as mantadory.
    govind.

    Hi,
    To make the field as mandatory go for Field status variant,Posting key,account group. these three are the main to make a field as a display,mandatory or optional.
    if u want to put a condition for example. when business place is 1 then section code is also 1 then go for validation T.code ob28
    if u want to substitute for example when business place is 1 then section code field replace by business place.
    All the above business place and section code are same.
    Hope this is helpful, Assin points
    Regards,
    Sankar

  • Fb60 business place field value assign to branch field

    Hi Experts,
    for vendor invoice creation in fi by using fb60 t.code i am giving business place & all required fields. My requriment is that business place value assign into branch name by using j_1i7_get_bussiness_place function module.suggest how to assign & how to develop logic in this function module(in ecc6.0).
    Regards,
    babu

    Thanks a lot,
    I am not referring to "Business area" here, but i am looking for the "Business Place / Section Code" fields.
    While doing Down Payment Request to Vendor in F-47, I want to fill  "Business Place / Section Code" fields but they are suppressed.
    And this field cannot be controlled through FSG / Posting Keys.
    Thanks,
    Pavan.

  • Business Place Missed while posting the doument

    Dear Gurus,
    We have posted someVendor Invoice documents , without mentioning Business Place and Section Code, we need to rectify this doucuments, Please suggest us.
    Regards,
    Karthik

    Unfortunately there is no statndard transaction to update bus.place or section code. You have to write an ABAP program to update these fields in tables BSEG and as well as WITH_ITEM. This is the only way to update existing documents.
    Otherwise revese the documents and repost them with bus.place/ section code.
    In future in order to prevent blank bus.place/ section code, You can refer to the sap note 607459, in which it will suggest you to write a validation on section code field.
    Hope above information help you.
    Regards
    Siva

  • F-04 Section code error while full Down Payment Clearing

    Hi,
    I am facing a situation wherein suppose I have given an advance of INR 10,000 to an employee as Travel advance but due to some reason his trip got cancelled and the employee is refunding me the full advance. I am trying to clear that down payment of INR 10,000 through transaction code F-04 but I am getting an error and the system is asking to input Section code to proceed further but the Section code field is greyed out; I can see only Business Place coming automatically but not Section code. In this case ofcourse no invoice will be raised on the employee.
    I am facing the same problem if try to clear through F-54 without any invoice reference. But when I try to do a partial/residual clearing the system allows me to enter Section code and proceed with the clearing. I have created a validation for making Section code mandatory and am using Sets (t-code GS01) in my validaiton but i have not inputted clearing transaction codes in there.
    What I am unable to understand is why I am getting this error only while doing full clearing and without invoice reference. If there is something wrong with the validation I should get the same error while doing partial/residual clearing.
    Please help me out on this one.
    Thanks

    Hi
    In validation , you have to give TCODs in which both the field required to make mandatory. Otherwise it is applicable for every transaction of vendor.
    Make necessary changes in prequisits in validation.
    Thannks
    GG

  • Section code in customer line item for scrap

    Hi
    I created customer. I assigned business place to manufacturing plant and then section code to business place. Now i created scrap order and did PGI and invoice.
    Now i i saw accounting entry and double clicked on customer line item. There i saw business place field is updated. But section code field is not updated in that.
    My requirement is that is TCS certificate is not comming in J1INCERT. Its telling NO DATA SELECTED FOR PRINTING even though i gave all parameters like challan number, date, etc.
    Edited by: Deepak Agrawal on May 12, 2010 3:29 PM

    HI,
    Are you using new general ledger concept?
    Regards,
    Satish kumar.

  • Business Place change mode for posted documents

    Dear friends,
    I have to make changes of business place/section code field for the posted documents. 
    How is it possible.
    and I am not able to find the FBCJ wht documents in challan updation J1INCHLN. 
    Pl provide your valuable suggestions, which will be rewarded.
    BSR

    Dear Sarma,
    Thank you for your valuable suggestion.  I have tried for updation.  Actually my issue is I have to replace the existing business place with anotherone.
    I think J1INPP is only for updation of Business place/section code for empty documents.  My requirement is for replacement.  Can you see how best we can do.
    BSR

  • Witholding Tax - Define Business Place - ECC 5.0

    While defining business places in withholding tax we are getting Section code Field instead of Business Place.
    We are using ECC 5.0. Please any one clarify the reason for the same.
    We were getting the Field Business Place in 4.7EE. is it Version relevant??????
    Regards,
    Nag

    hii..
    Follow the menu path
    IMG-FA-****-Tax on sale/purchase-basic setting-south korea-define business place.
    Regards,
    Aakash

Maybe you are looking for

  • ITunes match on two iPhone with different apple id

    Hi I bought itunes match and it works very well. My wife has an iphone registered with her apple id. Is it possible to configure my itunes match subscrition on her iphone and let her buy application with her apple id? thanks, Matteo

  • DVD drive will not recognize blank DVDs after upgrade to Lion.

    It finds burned DVD/CDs but not blank ones. Disk utility partially sees blank dvd, gives option to eject it, but will not allow eject it. Finder does not see it at all. have to restart to have it eject. Tried different DVD's (Manufactures and -R / +R

  • Read the csv file from plsql

    Hi, I have data in csv file. I need to read the data from that file and at the same time i need to omit first row(ie column header). How can i do this...? Please help me....asap Thanks in advance....

  • AAAaaaaa, Firmware Issue still there!!!

    I just updated my n95 8gb and I still have the same issue I had in the first place!!!! I CAN'T DELETE THE FLIPPING ARTISTS!!!!!!!!!!!!!! To my knowledge the firmware update was supposed to solve this problem! Am I the only one who still has the issue

  • InDesign CS6 for Mac v8.1 updater

    Manual download available?