Business Role: ZSOLMANPRO (missing info in NavBar)

Hi
I am using Business Role ZSOLMANPRO for CRM Web Client UI (mainly for ChaRM).
Anyway, I have tested with SAP_ALL and SAP_NEW and everything appears perfectly.
When I remove SAP_ALL and SAP_NEW there are some items missing.
The below screenshot is with SAP_ALL and SAP_NEW.  The YELLOW highlighted items do NOT show when these profiles are removed:
Why are yellow items not showing???
I have double checked and they are definitely assigned to the ZSOLMANPRO Business Profile via "Direct Link Groups to Nav. Bar Profile".
So I can't for the life of me work out why they are not showing!!
Any suggestions?
Thanks
Shaun

Please see  the last item on this page:
http://scn.sap.com/community/it-management/alm/solution-manager/blog/2014/01/30/add-external-url-to-navigation-bar-web-ui
I have added in auth object C_LL_TGT and put the associated parameters in place. Still does not show .

Similar Messages

  • Copied Business Role in Solution Manager ITSM

    Hi All
    This is eunhwa.
    I have a question regarindg copied business role in Solution Manager ITSM.
    To copy business role, I copied technical roles Navigation profile, configuration key and PFCT Role ID. And then I copied
    a business Role. And assign copied technical roles to copied business role.
    And I changed Direct link group UI. For example, in copied business role ZSOLMANPRO, There were many
    direct links, I only left ‘incident’ and ‘problem.
    However when I selected incident’ in direct link, there was no transaction ‘zmin’ assign. I couldn’t create a incident.
    Why this error happened? Is there anything which I miss?
    Thanks.
    Best Regards,
    Eunhwa Park

    Hi,
    Well, there are multiple things you can check.
    1. If you are using IE
    You have to add the page/pop-up to the compatibility mode of your Browser.
    IE -> EXTRAS -> Settings for Compatibility Mode -> Add -> Refresh the CRM WEB UI
    2. Check if you had assign SM-CREATE in the ZSOLMANPRO Navigation profile. (In Assigning the direct link groups to Nav. Bar profile.
    3. Check whether you had authorizations for ZMIN in PFCG profile.
    4. Additionally check
    1905448 - How to restrict the suggested transaction codes when creating an ITSM
    Incident using CRM Web UI - Solution Manager
    5. In define transaction types corresponding transaction types are active. (In SPRO under solman ->Capabilities->ITSM-> Transactions)
    6. Check the copy control whether they are fine. (In SPRO under solman ->Capabilities->ITSM-> Transactions)
    7. Ensure that the transaction type's channel definition in customizing is set to 'CRM Web-Client UI'
    If your issue is still not resolved yet, please paste the error/screen you are getting.
    Regards
    Rishav

  • Displaying business role and organization unit info in context area

    Hi gurus,
    I want to bring the business role and organizational unit details with which the user has loogged in the web UI in context area.
    Other idea may me next to the logo. Below is the example how it should look like
    Logged on as: Business role/Organization unit details
    Can anybody please help.
    Regards
    Yogesh

    Hi
    The following link provides required solution.
    https://wiki.sdn.sap.com/wiki/display/CRM/WelcomeUserMessageinWeb+UI
    Paparao

  • Business Roles not getting refreshed in UI

    Hi,
    When I log in to the Web UI, I can see all my roles.
    Now when I delete a Position/user assignment in the org model, I would assume
    not to see that role when I log on to the BSP application.
    I'm completely coming out of the application to reflect my changes.
    My questions would be
    1. How to delete a business role
    I've tried removing the complete position itself but I can see the roles
    I even tried clearing the browser cache but not luck, I'm using Firefox.
    2.I wanted to try a different browser, can somebody tell me how to change the browser
    3. For the other roles when I login I get an Interaction centre page with most of the screen blank.
    I've checked all the links
    I did try other solutions mentioned in other threads.
    I'm new to this version as well.
    I'm following c04 and CR580.
    Please do tell me the missing config.
    Another point is that I've SAP_ALL role
    Points will be given
    Thanks in advance
    Regards
    Deepak
    Edited by: deepak nair on Oct 28, 2008 3:39 AM

    Hi Deepak,
    1. Did you copied SALESPRO business role to ZSALESPRO business role?? If yes, delete ZSALESPRO business role and
    again copy SALESPRO business role to ZSALESPRO1 - reason may be by mistake you have copied IC_AGENT or IC_MANAGER to ZSALESPRO.
    2. To make your life easy with PFCG roles -
    2.1. I suggest you to copy standard Sales Professional role to "Z" role
    (eg: SAP_CRM_UIU_SLS_PROFESSIONAL to Z_SAP_CRM_UIU_SLS_PROFESSIONAL) and generate the profile.
    2.2. Add role SAP_CRM_UIU_FRAMEWORK (copy of it eg: ZSAP_CRM_UIU_FRAMEWORK)
    2.3. Add these roles to your User along with SAP_ALL (or Z_SAP_ALL) and SAP_NEW
    3. Add your User to Employee
    4. Add your Employee to the Position in Org. Model
    5. Select PFCG Role ID = Z_SAP_UIU_SLS_PROFESSIONAL in your business role (ZSALESPRO1)
    6. Extend your Position with Business Role (PPOMA_CRM -> double click on your position -> select GOTO -> Detail Object -> Enhance Object Description) -> highlight business role -> click on create info-type -> select your business role (ZSALESPRO1) -> save
    7. Clear the browser cache (delete temp. internet files) and delete cookies
    8. Log on to WEB UI with your user and password...
    I am sure that, if you follow this - you will active WEB UI without any problems. If still you have problems, let me know....
    Cheers,
    Peter J.

  • Adding logical link from a different Business Role

    Hi Gurus
    I want to add the second-level entry(complaints search page) of the Complaints & Returns work center of the standard Servicepro business role as a Navigation Bar link to an already customized IC Agent Business role. How would I achieve this in CRM 7.0?
    Thanks in advance.

    Hi Amar
    Thank you very much for your valuable inputs. I had some doubts and am explaining the detailed process below so that I'm clear as to how I can fix this.
    I selected the SRV-PRO NavBar Profile and double-clicked on Define Work Center. On the Define Work Center Overview Screen, I found the Work Center SRV-COMPL, which has the description as Complaints & Returns and LogLinkID as SRV-CPL-WC. Then, I selected SRV_COMPL and double-clicked on Define Logical Links and looked for description as Complaints: Search. I found the LogLinkID SRV-COM-SR link with the corresponding Target ID as TBT120MISC.
    Now,I copied the customized IC Agent NavBar Profile which we currently have and created a new work center by copying SRV_COMPL. On Assign Groups, I kept the SRV-CMP-SR group ID and deleted all others. Then, I assigned the newly created WorkCenter to the new copied IC Agent NavBar Profile. I'm now able to view the new work center and it launches the workcenter page, but the link to open the complaint search is not available. Is there any step that I'm missing?
    Thank you again for your help.

  • Assigning Business Roles - No such task exists

    I am trying to create a user ID and assign a Business Role in the process.  The attribute that I am using is MXREF_MX_ROLE.  It is defined as a multivalue system attribute with a data type of entry reference and the reference type in MX_ROLE.
    From my workflow task, I can select the role from the selection window but when I click OK to save to the identity store, I get an error "You have tampered with the params".  From the Monitor UI, I see the message "Failed setting value for attribute Member of Role.  No such task exists"
    I have a Modify User task that uses the same attribute.  When I attempt to use it, I get the "Failed setting value for attribute Member of Role.  No such task exists".  But I do not get the "you have tampered with the params" message.
    I am only trying to set this in the identity store right now.  I am not yet ready to provision to my ABAP system.
    Any assistance is appreciated.

    Hi Lori,
    in case you have linked privileges to your role, SAP NW IdM searches for tasks in the related repository (as stated in the attribute MX_REPOSITORYNAME of your privileges). Type in the ID of some test tasks in the repository constants MX_DEPROVISIONTASK, MX_PROVISIONTASK and MX_MODIFYTASK and see if it works.
    Otherwise, there could be a missing relation the other way round from the role to the user. See if there is a MXMEMBER_MX_PERSON attribute in your role.
    Best regards,
    Nils

  • Could you check your CRM system for a business role?

    Hi Forum,
    i have difficulties getting my business partner from IS-U to CRM in an initial load because a business partner role is missing in CRM. The role is 'MKK' Contract Partner
    It exists in IS-U but not in my CRM. As i cannot create that role in CRM because it is in the SAP namespace i would like to know if it exists in your CRM system. And - if you can say - how it came there. By default/installation or later by middleware processes.
    Thank you

    Please - just make a little check in your CRM system...is there a role 'MKK' contract partner or not ??
    From that depends where i can continue searching for the error
    SPRO -> Cross Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Business Partner Roles -> Define BP Roles
    Thank you

  • Interactive reports do not execute with Z business role

    Hi all,
    We have created interactive reports which are working fine and displaying results with a standard business role. However, the report does not even execute when we use a custom business role - no blank screen no error, but the report does not execute at all.
    What could be missing ? Need your inputs please.
    Regards.

    Compare the profile value for the function profile id REPORTING_PROF in Z business role with your std business role. To check this go to define business roles> select your ZBusiness role>double click on Assign function profiles.
    Hope this helps!
    Regards,
    Kumar

  • CRM business role - user mapping initial load

    Hi,
    I'm tyring to initial load the data from the CRM systems into IDM. I'm able to get all data of the users expect their business role mapping(parameter in CRM).
    in the read pass of the user from the abap initial load , the attribute for the parameter is as follows,
                        Target                                                                             Source
    sap%$rep.$NAME%Parameter1:Info:VARCHAR:255|                        parameter1
    but no data is stored in the parameter1 table though the user has some parameter mapped in the CRM system                 
    Can anyone plz help to load this user-business role mapping details.
    Thanks in Advance.
    Regards,
    Pricy

    Hello Pricy,
    can you just give me some hints on what you are trying to do exactly?
    My assumptions:
    - CRM business role is stored as user parameter in ABAP SU01 user data, right?
    - you want to read all the ABAP user data from your CRM system INCLUDING the user parameter data from ABAP SU01 user data, right?
    If that is the case at least the loading part should work pretty fine. I just tried this on my local system and had no issues, all user parameters of my existing ABAP users where loaded into one temporary table.
    -> Pass: ReadABAPUsers -> table "sap%$rep.$NAME%Parameter1:Info:VARCHAR:255|"
    Did you find this temp table created on your database correctly? My table is there and is called "sapT01_001Parameter1" (where my repository is named T01_001) and it contains all the existing user parameters.
    What exactly is your issue?
    Regards,
    René

  • Business role transportation

    Hi Experts,
    I have created 2 new business roles, they are working properly.These 2 new business roles are the copies of sales manager and sales employee.I have transported from development to testing client, but only one business role is appearing in testing client and other one missing. What could be the reasons.
    Regards
    Krishna

    Hello,
    Well, that depends on what you mean with "but only one business role is appearing in testing client and other one missing".
    Do you only see one business role when you logon to the WebUI?
    --> If yes this simply means that you are not assigned to this role in the organizational model
    Or, do you mean that in the business role customizing activity only one of your business roles is present?
    > If yes check your transport request and see what entries were taken into that transport. It might be that the other business role is contained in another transport that is not yet released/imported. You can search all transports in a system to see if they contain specific objects in transaction SE01 and then in the menu select "Goto>Objects in Requests" and search for business role objects.
    Hope this helps,
    Joost

  • Business Role changes not being provisioned

    Guys (and girls),
    We're having the issue that whenever we change something to a business role in IdM 7.1 SP5, like adding or removing a technical role (SAP role) the change isn't provisioned to the system authomatically resulting in users not being updated.
    The workarround now is to change a business role and then remove it from a user and add it to that user again. Works ok when you're dealing with only a few users but I'm not looking forward to the day our basic role needs updating.
    Same thing goes for changing users telephone number or SNC name or the likes.
    I'm not sure if the two issues are related but am I missing an assignment of a task somewhere?
    Cheers,
    Jonathan

    Jonathan,
    I think so, but a pretty simple one to fix.
    I would do one of two things:
    1. Put a MODIFY task on MXREF_MX_ROLE or whatever attribute you're holding roles in.  Have this task do a role reconcilation.
    2. As a part of the workflow, have a role reconciliation execute.
    On the whole, I prefer the second option.  Don't like adding baggage onto the MXREF attributes.  Just keeps things running more efficiently.
    By role reconciliation, I mean executing the functions/tasks needed to reassert the roles on the user.  I think there's a built in scripting function to do this or you can automate the add/remove functionality you described in your message, holding the role MSKEYs in a temporary attribute.
    Matt

  • Web ui login error after business role selection

    Dear All
    I am keep facing the same problem while login to web ui from SAP CRM GUI thorugh transaction CRM_UI
    it keep asking login after the selection of business role and then end up with the following error screen, kindly help to rectify the followimg error
    Cannot display view BSPWD_BASICS/WorkAreaHostViewSet of UI Component CRM_UI_FRAME
    An exception occurred during the internal HTTP communicationException Class CX_BSP_WD_HTTP_RESPONSE_ERROR
    Text: 
    Additional Info: ICM_HTTP_CONNECTION_FAILED
    Program: CL_BSP_WD_STREAM_LOADER=======CP
    Include: CL_BSP_WD_STREAM_LOADER=======CM002
    Thanks & Reagrs

    Thank you so much
    my problem is a bit resolved because of your kind help, web ui is working but still having the following errors on the top of the screen, when i log in through SALEPRO , knidly help
    *An error occurred during initialization of the application*
    *An exception occurred during the internal HTTP communication*
    regards

  • Dealer Portal - Vehicle Management System - Personalization - Web Dynpro component assignment for business partner is missing

    Hi,
    In the Dealer Portal, Vehicle Sales Role --> Personalization.
    I am getting below Warning message.
    The Web Dynpro component assignment for business partner is missing.
    As per my investigation found below.
    Since address formats are different for each country, you can define in the Customizing activity Assign Web Dynpro Components to Country-Specific Address Formats under SPRO --> Logistics Execution --> Dealer Portal which Web Dynpro component you want the system to use for displaying end customer addresses.
    BUT do NOT understand the name of WebDynpro Component to provide.
    What are the entries or WebDynpro component names to fill in below?

    Hi Hussain,
    Could you share the step-by-step solution? Thanks.

  • Assign some Business roles in the CRm 7.0 i n the UI frame work.

    Hi,
    I need to assign some Business roles in the CRm 7.0 in the UI frame work.
    & how we need to assign the org to the business roles.
    Please provide any doc or any link is more appreciable.
    Thanks & Regards
    Prajith P

    Hi,
    When in the Org Structure, DOUBLE CLICK on the position so that it opens up the details screen.
    From the menu options, Select Goto>>Detail Object>>Enhanced Object Description>>Under the Info Type, Scroll down to business role, select and click on change mode. The business role assigned to that position will be displayed. Here you can assign the required role, save and go back to the org strucutre. Save again. It should be done.
    Regards
    Varun Taneja

  • Business Roles - Risk analysis

    Hi All,
    We are on GRC SP13.
    We are using business roles for provisioning to end users.
    When role owner is performing risk analysis for business roles, results are proper according to defined ruleset only if "SYSTEM" field is empty.
    If system is selected, then results shows that "NO VIOLATIONS".
    Is this the standard behaviour for risk analysis of business roles or Am i missing anything?
    Looking for your advise on this.
    Regards,
    Sai.

    Hi Jaya,
    Yes I remember this is possible. You can setup a customize attribute in GRC privileges. And put the business role name into this attribute.
    Try this URL, but perhaps your GRC consultant should read it instead of you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0e2c628-2690-2e10-0d82-dbf1931db2cd?QuickLink=index&overridelayout=true&51565377381172
    After creating the attribute, you need to revise the GRC framework to include this attribute (business role name) in your request.
    I don't have a working IDM system (with GRC integration) with me. I could not provide you more details.
    Cheers,
    Chenyang Xiong

Maybe you are looking for